Why- I try to connect my Samsung PL 55 camera to my iPad 1 using the camera kit it tells me this accessory is not supported by iPad. I have tried restarting etc but nothing works
I got the camera kit and plug in my Samsung pl55 camera. The iPad eventually says this accessory is not supported by iPad. a matte camera asks me if ! want to connect the USB to a computer or a printer. I select computer but by then it's too late and everything just sits and nothing happens.
Are you using Apple's iPad Camera Connection Kit?
Have you plugged your Samsung PL55 into the kit as shown here:
Are you trying to send JPEG images from the camera to the iPad?
Your post has a portion that starts with " a matte". I don't understand it. Perhaps the beginning of the sentence got omitted.
Similar Messages
-
I think I have a 1st gen ATV. The other evening I got the ubiquitous "Error-HDCP content etc, try again" message. When I logged back in later, the Movies tab was gone from the menu screen as was Netflix under the Internet tab. I have tried reset, restore, unplugging etc and nothing works, any thoughts?
Welcome to the Apple Community.
If you had/have Netflix, you have the Apple TV 2.
Check your iTunes Store location is set to the correct location. -
My ipad just won't let me sign in with my apple password on FaceTime or iMessage since updating to ios7 it says check my network connection, even though my iPhone works fine with the same password, can anybody help please, I have tried numerous things but nothing works. Will I have to wait for a bug fix to sort this? I hear they are working on one a the minute, I hate ios7
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/ -
I have an iHome iD85 it used to work fine, but now I get the error this accessory is not supported by ipad.
Is there a way to find out if its the iPad or iHome... and / or how to fix it?
Thanks in advance!go to ihome website, maybe you need to look into the troubleshooting section
-
I have tried It ALL but nothing works.
After updating my iPhone 5s and my iPad to ios8 the bluetooth and the AirPlay doesn't work properly. AirPlay isn't there at all, and bluetooth can connect to a windowsphone but not to another Apple device. I have tried it all and nothing works.
i have:
restarted, factoryreset, softreset and everything else i have been able to Google …again,and again, and again NOTHING works!
I Am out of options!!!Read https://discussions.apple.com/thread/4604596?start=0&tstart=0
-
Help! I have recently updated the software on my Iphone 4s and now my Iphone will not show up in Itunes. Can anyone please help! I am very frustrated, I have tried several things but I cannot get it to show up
Double check the version of iTunes on your computer. You must have iTunes 11.1 or later.
-
I have trying for ages to download itunes 10.3 to my laptop(windows vista 34bit) it starts downloading but at the point every time it freezes and doesn't finish installing. I have tried all sorts of suggestions but nothing doing. Anyone got any idea's. IPhone and IPod touch no good without it
Windows 64bit download: http://support.apple.com/kb/DL1615
-
I have tired deactiving my device from icloud online, I have had my contacts delete me and re-add me as a contact. I have also had them try deleting our entire message thread and starting a new one. I also had them hold down message and select "send as regular text" 3-5 times. I tried texting stop to some number I found in another discussion thread. NOTHING HAS WORKED. I called Apple support who claims they cannot help me. My service provider just refers me to apple. And now, some of my contacts no longer have the option to "send as regular text" when they hold down the messges to me! Please, please help me!
Hi Chris,
Thanks for the response. I contacted Apple at the link you listed and spoke with a representative. We walked through the steps I took in my first post above to ensure I had done them correctly. He didn't offer any new suggestions other than making sure my contacts turn on their MMS before texting me.
Unfortunately that is not working either. I tested this with several friends and I am still not receiving their messages. They get a response immediately upon texting me that says the message was undeliverable. They are able to receive my messages, I just don't get theirs.
Any other ideas?
It's mind boggling that Apple has made this such a difficult transition. There should not be repurcussions for choosing to discontinue the use of their product. The only other thing I can think to do is have my service provider change my phone number... what a nightmare. -
When I connect the 30 pin digital AV adapter to my iPad 2 I get the above error message. I tried reset/ power recycle etc. No joy!
http://support.apple.com/kb/ht4108
Here is the compatibility chart and Adapter Versions...Althought this,many have problems even with the Official product and the Digital adapter.... -
My iphone 4s will not turn on, It was working properly and then I noticed the battery was at 1% I then proceeded to charge my phone like normal but nothing happened. The phone was unable to turn back on it's been two hours I already, tried to reset but nothing works. I tried different chargers, my ihome nothing is working.
.
-
i've updated my iphone 4 (gsm) to ios 6.0.1 and after that it's stuck in recovery mode (itunes logo cable), i tried many solutions but nothing works, did any one has an idea about this , thank you
I should add that this has never been Jailbroken. I keep reading that a lot of times this is the case for a jail broken phone.
I have also gone through the not very helpfull steps on apples site to fix this.. It is not a security issue since i dont have an antivirus or any 3rd party software for my computer. -
My new macbook pro doesnt turn on. i press the power button and i can hear it runing but it wont turn on. i tried charging it but nothing works. help me please.
ilmare55555 wrote:
i cant go because if my parents find out my new mac broke they will kill me. i tried to restart it but it wont work i can only hear the fans working and then completely stop after 10 seconds.
It's new and under warranty. That's the reason to go to the Apple Store.
Did something happen to it? -
My new macbook pro doesnt turn on. i press the power button and i van hear it runing but it wont turn on. i tried charging it but nothing works. help me please.
ilmare55555 wrote:
i cant go because if my parents find out my new mac broke they will kill me. i tried to restart it but it wont work i can only hear the fans working and then completely stop after 10 seconds.
It's new and under warranty. That's the reason to go to the Apple Store.
Did something happen to it? -
every time i connect my ipod touch 4th gen. it says this accessory is not supported by ipod touch so people recommended me to just buy a new charger, so i did, but the night before I got my new charger it stopped charging, what should I do now?
also my power button does not worked it got stuck so therefor it doesn't work, are there any ways i can help it get loose and working again?Not Charge
- See:
iPod touch: Hardware troubleshooting
- Try another cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
the other day when iOS8 came out i downloaded it onto my 5th generation iPod, it has been working perfectly fine since, now today when i left it for a couple of hours, it turned itself off and now it won't turn back on. i have tried charging it but nothing is happening. it's not out of charge because the little battery usually comes up when its charging, but the screen is completely black and nothing is happening. i have tried turning it on by both buttons and it won't work. i don't know whats wrong with it. i haven't topped it or anything, so I'm assuming its the new download as it seems to be effecting other peoples devices as well. what should i do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
Hi, I hope that someone can help me. I am having so much trouble getting FMS to work it is unbelievable. We have installed FMS onto virtual server running Red Hat Linux Enterprise 3. We have managed to get FMS running but cannot get a connection to w
-
Dear gurus I have folllowing requirement. We want to have separate Billing type for certain customers. But order processing will be through stadard order type OR for all customers. Is this possible. BJ
-
Can't update to Boot Camp 3.3 or higher
Hello! I have been trying to update Boot Camp for a long time now and I get a prompt to do so every time I boot into Windows 7 Pro 64bit. The problem is that after downloading and installing the update and rebooting, the computer never seems to recog
-
WHILE expression giving Error 306, wrong number or types of args in call to
WHILE expression giving Error 306, wrong number or types of args in call to '=' declare block_id block; item_id item; begin block_id := find_block(:system.cursor_block); item_id := find_item(:system.cursor_item); message
-
When I download Adode flash player 11 from adobe, I can't get it to install. I utilize those "check if you flash player is working" sites, but it always tells me that my flash player is not installed. Please help.