Why in a KT3ULTRA 2 but not in a KT266PRO2?

Any Idea why 2 256MB sticks of PC2100 DDR RAM would work together in a KT3ULTRA 2 but not in a KT266PRO2?
The same 2 sticks, one Spectek and the other Samsung.
Gustavo.-

in that case i don't think you have a faulty motherboard, it a hardware incompatability.... some boards models are just picky with ram sitcks, it would by the same if you exchanged the board.
i think the best is trying to get 2 sticks of the same ram, maybe you could sell one of yours and get another ...

Similar Messages

My imessage has just stopped working with one of my contacts, on both of our phones imessage still works with other contacts. Why can we imessage others but not each other?

My imessage has just stopped working with one of my contacts, on both of our phones imessage still works with other contacts. Why can we imessage others but not each other?

Yes... to no avail

Aperture = Greed.....Why a G4 PB Runs but not a Dual G4

I'm so aggrivated by the installation restrictions and then I read all of these horror story posts.
I can understand needing 10.4.3 for some new code or something, but why can a 1.25 GHz G4 powerbook run this application, but not my G4 Dual 1.25 GHz PowerMac!? which is significantly faster and more powerful! I smell greed by trying to force us to buy a G5 Powermac. The G4 PowerBook is the end of the line, so that's fine, no other machine to force us to buy.
Am I wrong to think that this is blatant greed? Is there a technical reason? As an Apple evangelist, I am ****** off.

I had the same frustration. I upgraded my MDD 1.25 GHz Dual's graphics card to a 9800 Pro just so I could use Aperture. Then I realized that Aperture would not even install on my computer. So, I canceled my order, pouted for about a week and then decided to upgrade to Photoshop CS2 and use Camera Raw and Bridge in my workflow. I couldn't be happier with my decision, especially after reading all the headaches everyone has had with Aperture. I'll be humming along for some time before I need to upgrade computers and right now I'm not missing Aperture at all. Maybe someday when it's ready for primetime I'll try it out.

Why can I receive emails but not send them?

I have an iPhone 4, and I recently updated to iOS 7. Since the. I have not been able to send any emails. I am able to receive them, but not send them. I keep getting an error message saying that something is wrong with my password or username. I have tried to hard restart the phone, revert to a backup from before I updated the phone, and also deleted all emails and redid them, all with the same result. What should I do, and if it's a consistent problem with the new system, when is Apple going to fix it?

Yes, I have tried everything the sites have said besides taking it in to the Genius Bar. I tried hard restarting it, making sure my internet connection worked, moving off and on other networks, used an old backup to when I had iOS 6, deleting al my email accounts and adding them back, none of it has worked.

Why the error in one, but not the other

Why does this code Generate the error:
Complex object types cannot be converted to simple values.
The expression has requested a variable or an intermediate
expression result
as a simple value, however, the result cannot be converted to
a simple
value. Simple values are strings, numbers, boolean values,
and date/time
values. Queries, arrays, and COM objects are examples of
complex values.
The most likely cause of the error is that you are trying to
use a complex
value as a simple one. For example, you might be trying to
use a query
variable in a <CFIF> tag. This was possible in
ColdFusion 2.0 but creates an
error in later versions.
The error occurred in
C:\Inetpub\wwwroot\2onboard\kBookList.cfm: line 40
38 : <tr>
39 : <td colspan="6">
40 : <cfif showList IS NOT "yearly"><a class="nav"
href=""> Yearly  </a>  </cfif>
41 : <cfif showList IS NOT "complete"><a class="nav"
href=""> Complete  </a>  </cfif>
42 : <cfif showList IS NOT "wish"><a class="nav"
href=""> Wish
List  </a>  </cfif>
CODE.........
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
<title>2onboard.com - Kevin's Korner - Book
List</title>

<cfparam name="showList" default="complete">
<cfparam name="showOrder" default="title">
<cfparam name="showStatus" default="own">

<cfquery name="showList" datasource="2onboard">
SELECT
title,author,status,completed,pages,queue,rating,cover,series,book,link
FROM books
WHERE status = '#showStatus#'
ORDER BY '#showOrder#'
</cfquery>
</head>
<body>
<div id="container"> 
<cfinclude template="header.cfm"> 
<cfinclude template="explanation.cfm"> 
<div class="raised"> 
<b class="top"><b class="b1"></b><b
class="b2"></b><b class="b3"></b><b
class="b4"></b></b>
<div class="boxcontent">
<div class="boxcontenttext">
<table cellspacing="0">
<tr>
<td><span class="title">Kevin's
Korner</span><b> - Reading</b></td>
<td colspan="5"
align="right"><cfoutput> Library contains
<b>#showList.recordCount#</b>
books</cfoutput></td>
</tr>
<tr><td colspan="6"><span
class="spacetext"> </span></td></tr>
<tr>
<td colspan="6">
<cfif showList IS NOT "yearly"><a class="nav"
href=""> Yearly  </a>  </cfif>
<cfif showList IS NOT "complete"><a class="nav"
href=""> Complete  </a>  </cfif>
<cfif showList IS NOT "wish"><a class="nav"
href=""> Wish
List  </a>  </cfif>
</td>
CODE CONTINUES ON FROM HERE….
BUT, if I take just the bare minimum and test it as the
following, it works fine - WHY?
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml">
<cfparam name="showList" default="complete">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
<title> </title>
</head>
<body>
<cfif showList IS NOT "yearly"><a class="nav"
href=""> Yearly  </a>  </cfif>
<cfif showList IS NOT "complete"><a class="nav"
href=""> Complete  </a>  </cfif>
<cfif showList IS NOT "wish"><a class="nav"
href=""> Wish
List  </a>  </cfif>
</body>

> <cfparam name="showList" default="complete">
This line creates showList as a simple string variable
containing
"complete".
> <cfquery name="showList" datasource="2onboard">
This line redefines showList as a recordset containing the
data returned
from the database which is not a simple variable and can not
be accessed
with code such as <cfoutput>#showList#</cfoutput>
> <cfparam name="showList" default="complete">
This line does NOT redefine showList back to a simple string
because a
<cfparam ...> only fires if the variable does not
exist. The previous
two lines would create the variable, thus it exists.
jkgiven wrote:
> Why does this code Generate the error:
>
> Complex object types cannot be converted to simple
values.
>
> The expression has requested a variable or an
intermediate expression result
> as a simple value, however, the result cannot be
converted to a simple
> value. Simple values are strings, numbers, boolean
values, and date/time
> values. Queries, arrays, and COM objects are examples of
complex values.
>
> The most likely cause of the error is that you are
trying to use a complex
> value as a simple one. For example, you might be trying
to use a query
> variable in a <CFIF> tag. This was possible in
ColdFusion 2.0 but creates an
> error in later versions.
>
> The error occurred in
C:\Inetpub\wwwroot\2onboard\kBookList.cfm: line 40
>
> 38 : <tr>
> 39 : <td colspan="6">
> 40 : <cfif showList IS NOT "yearly"><a
class="nav"
>
href=""> Yearly  </a>  </cfif>
> 41 : <cfif showList IS NOT "complete"><a
class="nav"
>
href=""> Complete  </a>  </cfif>
> 42 : <cfif showList IS NOT "wish"><a
class="nav" href=""> Wish
>
List  </a>  </cfif>
>
>
> CODE.........
>
> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
> "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
> <html xmlns="
http://www.w3.org/1999/xhtml">
> <head>
> <meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
> <title>2onboard.com - Kevin's Korner - Book
List</title>
>
> 
> <cfparam name="showList" default="complete">
> <cfparam name="showOrder" default="title">
> <cfparam name="showStatus" default="own">
>
> 
> <cfquery name="showList" datasource="2onboard">
> SELECT
title,author,status,completed,pages,queue,rating,cover,series,book,link
> FROM books
> WHERE status = '#showStatus#'
> ORDER BY '#showOrder#'
> </cfquery>
>
> </head>
>
> <body>
>
> <div id="container"> 
> <cfinclude template="header.cfm"> 
> <cfinclude template="explanation.cfm"> 
>
> <div class="raised"> 
> <b class="top"><b class="b1"><b
class="b2"><b class="b3"><b
> class="b4">
> <div class="boxcontent">
> <div class="boxcontenttext">
> <table cellspacing="0">
> <tr>
> <td><span class="title">Kevin's
Korner</span>
- Reading</td>
> <td colspan="5"
align="right"><cfoutput> Library contains
>
#showList.recordCount# books</cfoutput></td>
> </tr>
> <tr><td colspan="6"><span
class="spacetext"> </span></td></tr>
> <tr>
> <td colspan="6">
> <cfif showList IS NOT "yearly"><a class="nav"
>
href=""> Yearly  </a>  </cfif>
> <cfif showList IS NOT "complete"><a class="nav"
>
href=""> Complete  </a>  </cfif>
> <cfif showList IS NOT "wish"><a class="nav"
href=""> Wish
>
List  </a>  </cfif>
> </td>
>
> CODE CONTINUES ON FROM HERE?.
>
> BUT, if I take just the bare minimum and test it as the
following, it works
> fine - WHY?
>
> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
> "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
> <html xmlns="
http://www.w3.org/1999/xhtml">
>
> <cfparam name="showList" default="complete">
>
> <head>
> <meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
> <title> </title>
> </head>
>
> <body>
>
> <cfif showList IS NOT "yearly"><a class="nav"
>
href=""> Yearly  </a>  </cfif>
> <cfif showList IS NOT "complete"><a class="nav"
>
href=""> Complete  </a>  </cfif>
> <cfif showList IS NOT "wish"><a class="nav"
href=""> Wish
>
List  </a>  </cfif>
>
> </body>
>
>
>

Why numeric control accept aef but not cds characters?

I place a numeric control on the front panel. It is just a simple U32. When I click on it, I can type in number, its also accept letter aefpz but when I type in cdor s, these three letters do not appear. Why the numeric control accepts some letters and rejects others?

Hi trout00
Some letters are accepted because you can enter numeric values like 13u5 which is 13.5 micro or 1.35e-5. The other letters are for the different prefixes.
Hope this helps,
Nick

Why can I receive iMessages but not send them?

I'm signed into Apple ID for iMessages and have both wifi and cellular data available but I can't send iMessages! I'm receiving them but can only respond by text. FaceTime is also working!

Macrumors posted a solution for this. I used it and it seems to have worked for me.
Here's what they said:
1. Turn off iMessage in Settings > Messages
2. Reset networking settings in Settings > General > Reset
3. Reenable iMessage in Settings > Messages
Source:
http://www.macrumors.com/2013/09/30/resetting-network-settings-may-fix-imessages -not-working-in-ios-7/

Any idea why this works for dataGrid but not for a list?

<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
      xmlns:s="library://ns.adobe.com/flex/spark"
      xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600" xmlns:deviceservice="services.deviceservice.*">
<fx:Script>
<![CDATA[
   import mx.collections.ArrayCollection;
   import mx.controls.Alert;
   import mx.events.DragEvent;
   import mx.events.FlexEvent;
   import spark.events.IndexChangeEvent;
   //[Bindable]public var totalPrice:int =0;
   private function initApp():void {
    firstList.dataProvider = new ArrayCollection([
     {label:"First", data:"1",value:"first"},
     {label:"Second", data:"2",value:"second"},
     {label:"Third", data:"3",value:"third"},
     {label:"Fourth", data:"4",value:"fourth"}
    secondList.dataProvider = new ArrayCollection([]);
   protected function initbut_clickHandler(event:MouseEvent):void
    initApp();
   protected function popupbut_clickHandler(event:MouseEvent):void
    //totalPrice+=int( secondList.selectedItem.data);
    //Alert.show(" The total price is:"+totalPrice );
   protected function secondList_dragDropHandler(event:DragEvent):void
    var artistList:String="";
var dragObj:Array=
     event.dragSource.dataForFormat("items") as Array;
    trace (dragObj[0].value);
    artistList="Data: " + dragObj[0].value;
    Alert.show(""+artistList);
   protected function firstList_creationCompleteHandler(event:FlexEvent):void
    initApp();
]]>
</fx:Script>
<s:List x="73" y="106" width="125" id="firstList" dragEnabled="true"
    dragMoveEnabled="true" dropEnabled="true" allowMultipleSelection="true" creationComplete="firstList_creationCompleteHandler(event)" ></s:List>
<s:List x="409" y="106" width="162" id="secondList"
   dropEnabled="true" dragEnabled="true"
   dragMoveEnabled="true"
    dragDrop="secondList_dragDropHandler(event)" ></s:List>
<s:Button x="187" y="245" label="Init app" id="initbut" click="initbut_clickHandler(event)"/>
<mx:PopUpButton x="359" y="266" label="PopUpButton" id="popupbut" click="popupbut_clickHandler(event)"/>
<s:Label x="631" y="165" text="Label" height="17" id="show1"/>
</s:Application>

the example is shown here for a dataGrid:
http://livedocs.adobe.com/flex/3/html/help.html?content=dragdrop_5.html
It's the example located at the bottom:
I tried using a form instead of a dataGrid but it does not work, especially for the one in bold.

Why is mail sending messages but not receiving? problem just started.

not sure that anything has changed on my imac recently. i am running 10.7.3. i can send mail but it's not receiving. help appreciated.

benhill00,
Please look over Apple's Mail Setup, Troubleshooting etc.. link. I suspect a setting has just gotten "confused" or become corrupt somehow. Frequently all you need to do is go into the Mail's Account settings and re-input the settings.

When I cut and paste a selection from a website, and paste to Textedit, why will the text open but not the image: was OK before Lion.

Before Mac OS Lion I could select text and pictures from a Firefox webpage, and paste into Textedit, with no problem. Since Lion the text selected pastes fine , but for an image there pastes only anicon which does not, and will not open.
I checked with the same procedure in Safari, and everything is fine.

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
There are other things that need attention:
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
*Shockwave Flash 10.0 r45
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/

Bluegrass Cellular's Deceit! Why will Verizon allow change but not Bluegrass Cell.

Premise- The two carriers have a reciprocal agreement between the two and via that contract, Verizon supplies equipment (specifically LTE tech) onto Bluegrass towers, agreeing to share towers and equipment while Verizon agrees not to compete with BG Cellular in their small 34 county area.
Details- My wife gets a healthy corp discount through AT&T. We make the decision to move all family phones to AT&T for huge financial savings. Prior to finalizing our decision, I called Verizon for an unlock code. The support person tells me their iPhones aren't locked, at least that she's aware. Still cautious, I take my Verizon Phone to the AT&T store, insert an AT&T SIM and after a network reset, sure enough, the VZ iPhone 5 gets an AT&T signal. It's not LTE due the the difference in the two networks but it is4G HSPA+ Which I fully expected. We also spoke with Bluegrass Cellulars Corp people from the AT&T store in order to port numbers and make all necessary Changes on the spot. We asked what Bluegrass needed from us in order to complete necessary changes and they told us Nothing; they would take care of everything. They went on to tell my wife, via conf call (she wasn't with me at the time nor did we have her phone with us) what time (the following day) to turn her phone off, insert the AT&T SIM CARD, and turn back on. At that time she was to be fully functional with an AT&T signal. I completed all paperwork, paid for amenities, and we had just added 5 lines to AT&T.
Problem- after turning her phone off, inserting the new SIM AS TOLD, message on phone came up stating the SIM card would not work with that phone. Without going further into a real cluster of a mess, I'll finish this with just necessary facts in order to provide enough detail to hopefully find an answer that makes sense. I called Bluegrass Cellular requesting an unlock code in order to finish making this change. 3 times I called talking with 3 different people, all giving me the same answer...Bluegrass Cellular doesn't lock their phones. I believe that each support person honestly believed what they were telling me was true; problem is, I know it isn't. After several days of my wife having to travel for work without a phone, I just went to the AT&T store and purchased a new 5s.
We sent a complaint to the BBB just because we felt we were treated with deceitfulness. Bluegrass's response was that they did not lock their phones and the reason the phone wouldn't work was due to the different networks Bluegrass CDMA and AT&T GSM worked with. I kept telling them that answer didn't hold water because I was talking to them on a CDMA VZ phone proving they had not been admitting their phones are indeed locked.
Question- what, if anything have I overlooked? I was out $700 additional I wasn't planning on before changing her over. Can this Bluegrass Cellular phone be unlocked by a 3rd party. Bluegrass refuses to do anything. If they helped me now, they would just be admitting their deceitful practice. I'd love nothing more than to make educate the Bluegrass customers in some way. I paid my dues but don't want others blind-sided by their diligent intent to tell people whatever it is they think someone wants to hear as opposed to what's needed in order to make informed financial decisions.
Sorry for this long post but I wanted to add enough factual information and hope for I helpful replies based on good factual information. I'd love to post their BBB response as well as my rebuttal but I don't see any good coming from it. The facts are here!!!
Thanks for any help someone might provide us.
Sincerely,
Bhelson.

According to this article, iPhone: Wireless carrier support and features , Bluegrass Cellular does not offer unlocking, sorry.

Why can I receive email but not send

Can receive email to Mail program but can't send. The Doctor says my internet connection is open.
Any ideas?

If it says that it can't send the message or that it had some sort of problem sending the message add a letter or word or take off a letter or word.
Make sure that firewall isn't blocking anthing.
Message was edited by: chrisfromhopewell

Why can I receive mail but not send?

I am receiving my gmail messages in apple mail but cannot send messages.

yes, it says
cannot send message using the server smtp.gmail.com
Ever since I set up the two step authentication with gmail I have had this problem. I have done the special password for my macbook but still getting this message.

Why is youtube audio working but not video?

Youtube worked well 2 days ago but since then only the audio has been working with a blacked out background....I haven't changed anything just updated software in App Store... any suggestions?

First to do is to uninstall all previous versions of flash player by using Flash Player Uninstaller.
After you update directly from Adobe Flash Player Software website, repair permissions and restart your computer.

Why are voicemails backed up but not restored?

I got an iPhone 5S and created an iTunes backup of my i5 to transfer over. Everything except voicemails are sent over.
Out of 40 voicemails, only 5 or so are transferred. Basically only the voicemails that are live on AT&T have transferred, im assuming the rest auto deleted themsevles (I think AT&T only retains them for a short time). However I've taken a backup extractor and can see ALL of my message are indeed present in the backup. I know I can export them to my PC but is there any way to get them to restore to my new device?

When one restores an iPhone from its own backup, visual voicemail is also restored. However, when one restores a new iPhone from a backup from a previous phone, the voicemails fail to restore. This occurred between my 3G to 4s, and again from the 4s to a 5s. Restoring the 4s once from its own backup resulted in voicemail recovery.
My only explanation is that when a different SIM card is used, voicemails cannot restore as one would otherwise expect. Perhaps voicemails are inexplicably tied to their SIMs. Unfortunately, newer models of iPhones tend to use exceedingly different sizes, rendering one possible fix unpursuable. iCopyBot is the other possible solution: you can extract the voicemails from the backup and restore them onto the new iPhone individually.

Why in a KT3ULTRA 2 but not in a KT266PRO2?

Similar Messages

Maybe you are looking for