Why is my #1 port light yellow?

prolly a stupid question, but all the other lights are blue. why is port #1 yellow?
thank you,
momkoz

oh yay, im not the only one.
and, yes! im having issue with facebook as well. i was doing farmville. forget that. i had to quit. this is a brand new tower, with a brand new router... so its really bugging me as to what it is. is it facebook? coz i hear a bunch of complaints about that as well.
but, getting back to the yellow light, i dont think its spose to be yellow. same thing. yellow any port. wierd.
so any insight or help would be greatly appreciated.
thank you,

Similar Messages

  • Why my airport express has a yellow light

    why my airport express has a yellow light (not blinking)

    Before doing a reset try the Airport Utility via Finder > Applications > Utilities ... this might give you a reason for the flashing light.   It could be something simple like the software needs updating.
    https://discussions.apple.com/message/16700100#16700100

  • WRT54GS port lights always on, internet light always on, only power connected.

    My WRT54GS v.2 wireless router has all port lights and internet light always on, even though the power is the only cable connected to it. The router won't detect the internet from my dsl modem. How can i fix this please, why is this happening ?
    thank you. 

    Did you try to reset the router by pushing and holding the reset button for 30 seconds or more?
    Richard Aichner (Ikester)

  • Airport Express 2nd WAN Port light always on, even when nothing is connected.

    My Airport Express 2nd WAN Port light always on, even when nothing is connected.
    Is this normal? The Airport utility also said that I didn't connect anything to the port - when there is a lan cable connected from the main Airport Extreme.
    The computer can connect to the WiFi from the Airport Express properly, but with blinking yellow and no internet connection, also it cannot obtain the ip address.
    After setting the Airport Express to the Bridge mode, the computer cannot access to the Airport Express anymore, with "Connection Time Out" error.
    The Airport Express was 3 days old, and was working properly until today. There is also one blackout today because of the storm.
    Had reset the Airport several times, didn't solve the problem.

    Hi again. That is a good idea. Check if router can grab an ip from your modem since wireless local connection through the router is working. If it can grab an ip and works fine on wireless, then you might have a problem with the ethernet ports. You might want to try assigning an ip address on the wired connection and see if ip of router is pingable. If really not working at all, possibility that router is not working properly anymore.

  • WRT54G v8 Hard Failure -- PORT LIGHTS ALL ON, BUT NO ONE HOME

    I have a new WRT54G v8 Wireless Router that my dad purchased (he's 86 and I'm 59 -- so neither of us is a spring chicken) at WalMart about a month ago. We had a power failure the other morning but the router worked fine after that all evening. BUT the Next Morning -- Ganz Kaput!
    Power Light is extremely dim, DMZ totally dark, WLAN appears dark, but all 4 ethernet port lights -- and the Internet port light are bright and steady. Cannot get packets through it, browse to it, or ping it -- despite power cycling and factory reset. It just does not respond at all.
    When you power cycle it -- the power light never blinks -- so I don't believe it is completing the power-on self-check either.
    Went through the mill with tech support. They recommended the usual reload == but not possible if you cannot communicate with the device.
    Has anyone seen the same thing? From the posts on the board, it appears there may be a problem with this unit, but have not yet confirmed.

    Okay bud don't feel bad about your linksys problem.  I have the same error I was using it and it went all lights on and my modem didn't recognize my ethernet port in use. Also the power light is DIM not blinking.  Fortunately i only bought this two months ago from circuit city and am going to return it tomorrow.  I don't think its firmware. I would try checking your warranty on your linksys. I think it may be defective thats why im returning mine. Good luck and post if you find anything that works.
    Message Edited by craft_boy on 07-26-2007 10:21 PM

  • When creating a fillable form and saving it as a pdf, the default color of the data fields is a light blue. How do I change the color to something else that will copy better, e.g. a light yellow?

    When creating a fillable form and saving it as a pdf, the default color of the data fields is a light blue. How do I change the color to something else that will copy better, e.g. a light yellow?

    It's probably the fields highlight color of the application, which you can change via Edit - Preferences - Forms.

  • Why does the apple tv light come on when I'm not using it?

    Why does the Apple tv light come on when I am not using it?

    my atv1 does that sometimes
    I'm 90% sure that it's because it crashed and rebooted
    it's basicly a computer and sooner or later a computer will
    crash unless rebooted

  • Why do we use port no. 11333 for Hyperion planning?

    Why do we use port no. 11333 for Hyperion planning Metadata Load through ODI?

    What more do you need to know, when you deploy planning you will see that there is a "Java RMI Registry" service/process, this runs on port 13333. The planning adaptor communicates with the RMI registry and that then communicates with planning. If you need to know more then search for "Java RMI" on the internet.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Why wont my image boarder light up when the image is hovered over, border is set to 2.

    why wont my image boarder light up when the image is hovered over, border is set to 2.

    Because you have not coded it correctly.  It is difficult for us to tell you where your mistake is without seeing your test page.

  • Light yellow coloured region on MacBook Pro 13" Retina Display

    Hi All,
    This issue is with respect to my Macbook Pro 13" Retina display. I have started to notice a light yellow (probably ivory coloured) vertical region on the right side of my screen. Not sure what caused this. Clearly noticeable on a white backgroud.
    I have attached a screen-shot and any guess what could be causing this issue?
    Many thanks
    Deepak

    Edit to my previous post.
    On the screenshot, I do not see the light yellow region appearing.

  • ME23N restrict IDOC creation and keep traffic light yellow

    Hi,
    I have a requirement in which I need to restrict the EDI IDOC if there are errors in the PO. Also as the IDOC is not created the messages (type NEU) should remain with the yellow traffic light as the IDOC is not processed. What would be the best approach to keep the traffic light yellow , I have identified the point to restrict IDOC creation but the traffic light is set to red.
    Thanks,
    Esha

    Hello Esha,
    I have identified the point tojavascript:; restrict IDOC creation but the traffic light is set to red.
    Yellow light in Output type shows its Not Processed. If you are talking about exits EXIT_SAPLEINM_002/EXIT_SAPLEINM_011 they come into picture when Output type processing started. So ultimately they will have either Success/Error status.
    Even by setting sy-msgty = 'W'  in EXIT_SAPLEINM_002 and raising exception will not help.
    You can play around with FMs mentioned in group WMCP and can check.

  • Can someone explain why the Secure Easy Setup light on a...

    Can someone explain why the Secure Easy Setup light on a WRT54G would change from a steady green to steady orange after firmware upgrade?  Everything is connecting properly, and I see no change in performance of network other than light change described.   Thanks. 

    The way I understand the Secure Easy Setup button is this.
    It will be orange when the router is in normal operation mode. The light turns green when you press the Cisco Systems button (that is orange normally) so that the router will search for the web device you are trying to connect to the router. If you want to disable this feature all together go into your router settings page at 192.168.1.1
    Go to the Wireless tab, and then the Advanced Wireless Settings sub-heading, once in there look for the option SecureEasysetup and simply set it to disable (enabled is default) then click the save now and apply the settings. The light should be out now meaning you don't have the Secure Setup feature enabled.
    It is just a personal choice to have it on or off, it should not affect router or internet performance unless you hit the button trying to connect a device to the network.
    Message Edited by MontanaXVI on 12-14-2007 07:12 PM

  • HELP - hi with apple Configurator why does it show with a yellow triangle on the right side of the screen what am i doing wrong for the ipads not syncing or whatever and how do i fix that?

    HELP -- hi with apple Configurator why does it show with a yellow triangle on the right side of the screen what am i doing wrong for the ipads not syncing or whatever and how do i fix that? although i have looked online to try and figure it out and here is the website i found is this the stuff i need to do to fix this? is this site what i need to do to fix this? http://edtechstandish.wordpress.com/what-ive-learned-about-apple-configurator-so -far/  Thanks

    Sorry but I don't know anything about this.  But you might have better luck posting this question over ing the iPad in Business and Education forum here: https://discussions.apple.com/community/ipad/ipad_in_business_and_education?view =discussions.

  • I cannot record anything on iPod shuffle. Why? I do not recognise any of the windows shown in the various manuals about shuffle. Why? Currently an Orange light is blinking on the shuffle, and has been doing so for hours.  Why?

    I cannot record anything on iPod shuffle. Why? I do not recognise any of the windows shown in the various manuals about shuffle. Why? Currently an Orange light is blinking on the shuffle, and has been doing so for hours.  Why?

    I finally stumbled across a fix for this problem, and in case someone else is frustrated at some point by a similar issue I'm posting what finally worked to enable me to bring iTunes up at any time (without rebooting first).
    The solution was to go to the preferences to uncheck "search for shared libraries".
    I'm glad the problem is fixed, but Apple developers really should include a timeout function on iTunes search for a shared libraries. At least a visual dialog to confirm that the application is in the process of searching for a shared library on the network would help provide clues as to what is causing the spinning beach ball to appear right about the time the application window should pop up.

  • Disable LED/Port Lights on LRT214

    Does anyone know how to disable the port status lights on the LRT214?  I have my equipment in the basement, and I'm trying to turn all the port lights off.  When the basement lights are out, the small lights end up freaking out my wife when she checks the security cameras when I'm working nights.

    I think this feature is not available yet with the LRT...didn't see any configuration in the web GUI for my router. It's a good idea you brought this up and they (Linksys) might consider this in future firmware updates.

Maybe you are looking for