Why is my volume not working
please help my volume wont work from the built in speaker but works headphones and docks
Same happened to me. I talked on the iphone 5 regularly then i had another phone call and couldn't hear a thing! Like they were talking to me from the other side. Then I put the headphones on and listen good. What do i do ?
Similar Messages
-
Why does my volume not work out loud?
Um I'm not sure why my volume is not working anymore. Like sometimes it works and others it doesn't. Then I plug my headphones in nd it works when it wants to. But majority of the time it doesn't work... What's up with that?!?
I solved this problem by shutting down my ipad completely with the switch button. And then held down the Home button for about 60 seconds. I switched my ipad back on and Voila! My sound was restored to normal. But I've not tried to use it with a headset and see if the problem occurs again. Best to you all!
-
A couple of days ago my phone volume stop working. When I call it works fine, everything doesn't work. I tried to restore my phone but it didn't work and then I disabled my restrictions but nothing changed. I do not know what to do.
Is it your volume buttons that don't work or just the sound? If its your volume buttons, then that's a hardware problem. If its the sound, check to see if your phone is on mute by double tapping the home button and swiping to the right.
-
Why is my volume not working anymore it goes out
my volume is not working on my phone
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
Why is my volume not working I have been having trouble with it
I have been having problem with the volume it was garbled and now I have no volume what so ever please help fix it I have checked every thing on my end
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
NOthing I do gets my volume back, nothing. I wish I could get the ios 5 back just so I won't have this issue, I hate the new software!
Right,
This has been going on now since the update began.
The phone does this weather i slide the volume button to silent then back, I use the volume buttons and get that picture you see above.I restart volume off then back on. I adjust settings turning everything off include adjust volume with buttons, then back on.I check the do not disturb under settings.
I'm not an idiot, I have messed with everything, restarted, tried it on and off the charger.
Sometimes it just has no sound, like the phone doesn't realize there even is a volume as you can see in the above pic, there is no gage that even lets you mess with the volume because it's not muted, it's just not there. Then randomly at some point it comes back.
This all started after the ios 6 update, and I was hoping it would get fixed. I miss the ios5 and have been considering moving over to android with the new Samsung galaxy 3....because right now apple is not beig very technical friendly at all. -
Mount volume not working in 10.4.6
Could someone please explain why this script does not work in 10.4.6?
tell application "Finder"
activate
mount volume "afp://192.168.1.100/thesharetomount"
end tell
Works fine in 10.3.9 but 10.4.6 gives error "some object was not found"
Thanks for any infoManaged to figure out a trick to get around this problem.
I added user name to the mount command
tell application "System Events"
set myuser to get full name of current user
end tell
tell application "Finder"
activate
mount volume "afp://" & myuser & ":@192.168.1.100/sharetomount"
end tell
Now it works but can't figure out why it does not without giving a user name? -
Why does quicktime does not work on os lio
why quicktime x does not work on OS Lion
QuickTime does work under 10.7, however you may want to check that you're opening the newest copy of it by going to your Applications folder and opening it from there.
If you keep having trouble with opening it, please let us know what error you might be getting. QuickTime X will open with just a menu bar, then you can go to the file menu and choose to open any file you wanted to open, or choose one of the screen or audio recording options. -
Why Dynamic Parameter is not working, when i create report using stored procedure ?
Post Author: Shashi Kant
CA Forum: General
Hi all
Why Dynamic Parameter is not working, when i create report XI using stored procedure ?
Only i shaw those parameters which i used in my stored procedure, the parameter which i create dynamic using stored procedure
is not shown to me when i referesh the report for viewing the results.
I have used the same procedure which i mention below but can not seen the last screen which is shown in this .
============================================================================================
1. Select View > Field Explorer2. Right-click on Parameter Fields and select New from the right-click menu.3. Enter u201CCustomer Nameu201D as the name for your parameter4. Under u201CList of Valuesu201D select u201CDynamicu201D5. Under the Value column, click where is says u201Cclick here to add itemu201D and select Customer Name from the drop-down list. The dialog shown now look like the one shown below in Figure 1. Click OK to return to your report design.
Dynamic Parameter Setup6. Next, select Report > Select Expert, select the Customer Name field and click OK.7. Using the drop-down list beside select u201CIs Equal Tou201D and using the drop-down list, select your parameter field (it should be the first field). 8. Click OK to return to your report design and see the parameter dialog.The parameter dialog will appear and show you a dynamic list of values that is updated each time your run your report. It couldnu2019t be easier! In our next tutorial, we will be looking at how to use this feature to create cascading parameter fields, where the values are filtered by the preceding selection.
Dynamic Parameters in Action
My question is that whether dynamic parameter is working with storedprocedure or not.
When i added one table and try to fetch records using dyanmic prameters. after that i am not be able to find the dynamic parameter option when i referesh my report.
One more thing when i try the static parameter for my report, the option i see when i referesh the screen.
Please reply soon , it's urgent
Regards
shashi kantHi Kishore,
I have tested the issue step by step by following you description, while the first issue works well in my local environment. Based on my research, this can be caused by the lookup expression or it indeed return Male value based on the logic. If you use the
expression below, it will indeed only return the Male record. So please try to double-check the record in the two datasets and the expression in your environment:
=lookup(first(Fields!ProgramID.Value,"DataSet1"),Fields!ProgramID.Value,Fields!Gender.Value,"DataSet2")
As to the second issue, please try to use the following expression:
=Count(Lookup(fields!ProgramID.value,fields!ProgramID.value,fields!Gender.value,"DataSet2"))
Besides, if this issue still exist, in order to trouble shoot this issue more efficiently, could you please post both the .rdl file with all the size properties to us by the following E-mail address? It is benefit for us to do further analysis.
E-mail: [email protected]
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Hello:
I have a Mac running OS 10.8.5 and I use Acrobat Pro and Acrobat Reader. Today for some reason, any time I try and access a pdf file from a web page, it won't open. I get a blank window. PDF files already on my computer open fine and I can create PDF files from Word docs, but I can't download or view any pdf file from any web page. Strangely, PDF files on web pages open just fine on my iPhone.
I checked that both my copy of Acrobat Pro and Acrobat Reader are up-to-date. They are.
I checked that my copy of Firefox is up-to-date. It is. And nothing changed with Firefox within the last 24 hours.
I am a humble computer end-user. I am baffled as to why this would suddenly not work. I have not changed any settings, etc. Any help or suggestions would be greatly appreciated.Thank you.
I checked your instructions you sent and as far as I can tell all of my settings, etc for Firefox (plugin updates and preferences) are correct but I am having the same problem.
However, everything works in Safari. I don't have time to attempt to diagnose why Firefox no longer works. I will just switch to Safari.
Many thanks.
Charles
Charles Deister
(503) 949-5762
[email protected]<applewebdata://81CB4171-226F-49DF-BD59-A38A7360B3FB/[email protected]>
PO Box 5032
Salem, OR 97304
http://www.pilotstrat.com<http://www.pilotstrat.com/>
This transmission (including any attachments) may contain confidential information, privileged material, or constitute non-public information. Any use of this information by anyone other than the intended recipient is prohibited. If you have received this transmission in error, please immediately reply to the sender and delete this information from your system. Use, dissemination, distribution, or reproduction of this transmission by unintended recipients is not authorized and may be unlawful. -
Why Oracle 8i is not Working with JDK 1.3
Why Oracle 8i is not Working with JDK 1.3 by using JDBC.
try this
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection con = DriverManager.getConnection("jdbc:odbc:"somedsn","scott","tiger");
I am using this for Oracle, it is working for me.
Uma
Java Developer
http://www.globalleafs.com -
why does adobe flash not work in my firefox. i have down loaded it several times. it will work in explorer and chrome.
IE uses a different version of Flash than other browsers use. You need to install the Plugin version of Flash for Firefox.
1.Download the Flash setup file from here: <br />
[http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe Adobe Flash - Plugin version]. <br />
Save it to your Desktop.<br />
2. Close Firefox using File > Exit <br />
then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, <br />
{XP: Ctrl+Alt+Del, Vista: Shift+Ctrl+ESC = Processes tab}
3. Then run the Flash setup file from your Desktop. -
Why do my panels not work in CC 2014
I made my own panels in CC but they don't work in CC 2014. I miss them.
It's the latter. Thank you for answering my question.
Op 21 jun. 2014, om 09:42 heeft Trevor Dennis <[email protected]> het volgende geschreven:
Why do my panels not work in CC 2014
created by Trevor Dennis in Photoshop General Discussion - View the full discussion
Are you talking about a custom workspace, or actual panels made with Configurator? If the former, then go Preferences > Sync settings. If the latter, then those Flash panels no longer work in CC 2014. Check out any of the multiple threads about Extensions being greyed out.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6481073#6481073
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
Why does my iMessage not work even with my apple ID signed in?
Why does my iMessage not work even with my apple ID signed in?
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom
BTW- Your profile shows you have iOS 6.1.4 installed. The max iOS for an iPad is 6.1.3. iOS 6.1.4 is for iPhones only. -
Why does Server Monitor not work with non-Xserves?
Does anyone know why Server Monitor does not work with non-Xserve computers? We acquired a Power Mac for a server, based on there being no apparent difference except for the obvious. Turns out there are some differences after all.
Do Power Macs lack some hardware components or is this just a software thing?God question, unfortunitly I dont have the answer but I would also like to know why the software only works for X-Serve....Is there any 3rd Party Software that is similar to "Server Monitor"?
Thanks
Maybe you are looking for
-
HP8540w (540M) ram upgrade, won't boot past bios
I have recently acquired new RAM. First it was 2 x 8 gb but I found out later this is not supported by my specific model. But now I switched it with 2 x 4gb PC12800 CL11, from a newer hp model and it still won't boot past the BIOS, which has been upg
-
Reader 9.3.2 does not remember last page visited for scanned pdfs
Using an old school PPC Mac, OSX 10.4.11. Reader 9.3.2 does not remember last page visited for scanned pdfs. It only remembers the last page visited for searchable pdfs, but not for scanned. I have the box checked in "Preferences: Restore last view
-
iOS 8.1.3 update problem.
-
Error in Enabling Admin Status
1552 E Ap with a 2504 WLC. Single Root Ap with Mesh the Mesh has the problem. Both Power Injector and AP has been replaced . How do you turn on the 802.11 B Radio? No other problems at 40 other sites with identical installation.
-
Formatting a timestamp into string with $ specifier
Formatting a timestamp into string with $ specifier does not work; the formatted string is empty and no error is reported: I have forced the width to 10 to show that the format is at least partially scanned but when it is omitted the timestamp field