Why is one message being repeatedly sent, blocking all other messages?

This is a Thunderbird concern: Three days ago I had a message come and repeat itself numerous times (around 30 times). The same thing occurred yesterday and now has blocked other messages from coming in. I have shut down and restarted the computer twice to no avail. It will tell me, as did this morning, I have 14 messages, but only one came through and it was the same one that has been stuck for two days now.
When I click on Get Mail, nothing happens.
If you can help me correct this, it will be greatly appreciated! Thank you.

Try to login to your account via webmail and delete the problematic message.

Similar Messages

I synch my iPad, iPhone4 and MacBookPro iCal through ICloud. All calanders except one synch on my MacBook, although all others synch across all devices. Any clues?

I synch my iPad, iPhone4 and MacBookPro through ICloud. All calanders on iCal, except one, synch on my MacBook, although all others synch across all devices. I receive the following error message "The request (CalDAVAccountRefreshQueueableOperation) for account “iCloud” failed." with no idea how to remedy.

I've just noticed the same problem. My iCloud account had disappeared from the Calendar app. When I added it again, same error "The request (CalDAVAccountRefreshQueueableOperation) for account “iCloud” failed."

How can I block all other mail account just to only use the exchange mailbox of our company? This is to prevent the user to setup his on company iPhone.

How can I block all other mail account just to only use the exchange mailbox of our company? This is to prevent the user to setup his on company iPhone.

I don't know if I'm asking this all in a way that can be understood? Thanks ED3K, however that part I do understand (in the link you provided!)
What I need to know is "how" I can separate or rather create another Apple ID for my son-who is currently using "my Apple ID?" If there is a way to let him keep "all" his info on his phone (eg-contacts, music, app's, etc.) without doing a "reset?') Somehow I need to go into his phone's setting-create a new Apple ID and possibly a new password so he can still use our combined iCloud & Itunes account?
Also then letting me take back my Apple ID & password, but again allowing us (my son and I) to use the same iCloud & Itunes account? Does that make more sense??? I'm sincerely trying to get this cleared up once and for all----just need guidance from someone who has a true understanding of the whole Apple iCloud/Itunes system!
Thanks again for "anyone" that can help me!!!

How/why is my iPhone being repeatedly hacked

I don't usually post on this sort of thing but this has been annoying me for quite some time now.
I have read countless posts about 'how the iphone cannot be hacked unless the hacker physically possess the phone' but I tend to believe that isnt true after my phone appleid account was hacked ....7 or 8 times? I've actually lost count now.
Over the last 5 months I repeatedly got those 'How to reset your apple ID password' emails which hinted someone was punching in my username and clicking the 'I forgot password' button. But a few times now amongst the many, many "I forgot" emails there is one in the list of unread emails saying 'Your Apple ID password has been reset.'
Its pretty odd cause whoever is hacking me has nothing I can think of to gain - no credit card details and once they hack into my account, I answer security quetions and gain the account back into my own hands (albeit with a new password. I'm starting to run out of password ideas now as you can't use the same one or even similar again).
All the hackings are happening (from the time I get the emails) I'm guessing somewhere in the northern hemisphere due to the fact it always happens about 2-3am local time for me.
Is there anything more I can do to stop this ****wit hacking into my account? I seriously thought this idiot would have given up by now.
And for anyone thinking it - no he's not guessing my passwords. I've had so many different ones now with uppercase and numbers there's no way anyone could guess them all (or any for that matter!!).
Any help would be appreciated!!

If you are receiving e-mail messages that indicate that someone is trying to reset your Apple ID password, they may be phishing scams. Do not click any links in those e-mail messages, and if you make the mistake of doing so, do not provide your current Apple ID password on the page you are directed to.
Unfortunately, in this case, there's nothing to be done except treat those messages the same way you would any other spam.
The other possibility is that someone is actually trying to reset your Apple ID password. This may be due to a malicious attack, but more likely, it's just someone who thinks your Apple ID is actually theirs (due to a typo, faulty memory or something similar) and is trying to "regain" access. In any case, this is merely an annoyance, but you can put an end to it by enabling two-factor authentication on your Apple ID. This will require an additional piece of information that only you will possess in order to even start the password reset process.
If you are actually seeing your password getting changed, and are having to reset it yourself to regain access, you are being hacked. This could be because your password is not strong enough to withstand a brute-force attack by a botnet. It could also be because the attacker already has access to your e-mail address, and is able to intercept the reset e-mail and complete the reset process. Because of that danger, you should change the password for the e-mail account associated with your Apple ID. You should also change the password for your Apple ID, making sure that it is a strong password, and enable two-factor authentication as mentioned above.

Why is one of my earphones working and the other is not?

why is on of my earphones working and the other is not?

Either it isn't plugged in all the way, the headphones are defective, or the headphone jack on your Touch is broken.

Why does my javascript code work fine in all other browsers, but not Safari

Previously, I have asked how Safari handles javascript trying to resolve a problem with a slide menu, (http://www.designoutput.com/testslide.html) being directed to validator. I have corrected as many things as possible and still have code work in other browsers. Why will my code work in all other browsers (IE 5.2, Firfox, Netscape, and Opera) and not Safari. It appears that Apple would address some of the problems that people are listing. Possibly, my problem is not with Safari, but my code, if so why does it work in all other browsers. Having more knowledge of how Safari accepts code or handles code differently than other browsers would be helpful. It would be nice if I could debug my code in Safari step by step to know where the problem is at. I'm just frustrated with Safari after working on my problem for over a month. Would be very greatful to anyone that could just being to get my code to appear in Safari (only a blank page in Safari, menu appears in all other browsers)
G4 AGP 400, Powerbook G4, G4 Siver 733 Mac OS X (10.4.7)

you seem to have deleted even more end tags. elements (<a>, <div>, <td>, etc.) need to be closed (</a>, </div>, </td>, etc.) to structure the code properly.
incorrect:
document.write(<font ...><b>example)
correct:
document.write(<font...><b>example</b></font>)
check out w3schools for html and javascript help.
the ilayer tag should only be in your NS (i.e. not NS6) code, but it too needs to be closed.
i don't use IE, but with these fixes i've gotten your page to display fine in safari, firefox and opera.
iBook g4 OS X.4.x

Light Switch 2011 "C#" How to allow filter which take more than one entry to take * and show all other entries?

Dear All,
I have created the following code which extended my filter functionality and allowed a to take more than one entry (Comma have to be inserted after
each entry).
For example:
"Country Filter" can take ----> Germany,Egypt,Holand<o:p></o:p>
"City Filter " can take ---------> Berlin,Münster
if (Country_PAR != null)
String[] Country_Array = Country_PAR.Split(new Char[] { ','});
query = from p in query where Country_Array.Contains(p.Hotel_Country) select p;
if (City_PAR != null)
String[] City_Array = City_PAR.Split(new Char[] {','});
query = from p in query where City_Array.Contains(p.Hotel_City) select p;
Now want to extend it more and say something like:
If * is included ---- > Give me all entries
ex. Ge* This will give me everything which starts with Ge
If <> is entred -----> Give me entries which are not equal to a certain entry
ex. Country Filter = <> Germany give me all other entries except Germany
Thanks alot,
Zayed

Thanks your reply. I mean no one know my feeling. except if the new car is your. If Geek Squad can't install it. Just let me know and go. right? I ask many time? Are you ok to finish? He said yes. First time fail after 5 hours long wait and tow my car to Toyota repair. Second time said only take 20 to 30 minutes to program the key. but fail again after about 4 hours 30 minutes long wait and head light is not automatic turn on at night. I have to take a day off drive to Toyota repair. My time is money. wait there more than 10 hours and done nothing. 5 days no car and take the subway Bus and long walk. How do I feel? I m the customer. if without the customer. How you get pay? Geek Squad use my remote start and alarm and I can't return it. I loss time and money. My new car has a repair record. That is what Bestbuy want to do for the customer. Geek Squad work for Bestbuy. right? You are not just loss one customer. You will loss more and more than the remote start alarm cost. Bestbuy will not know? How come just 200$ remote start alarm and the 50$ module. Bestbuy don't want to reimburse. I m not tell you to pay me 5 days for rental car. why don't just want a happy ending? Bestbuy is big company. I m very small. 250$ it cost Bestbuy nothing. You can't let the customer loss money because you. right?

How to create a new rule in Windows Firewall to permit some specific IPs and block all other computers

Hello,
I have a Win7 PC. I want to block all incoming connections except 3 or 4 IPs. How can i do this?
I created a new rule to block all connections using this steps:
Inbound rules > New Rule > Custom > All Programs > All Protocols / Ports > All Local/Remote IPs > Block the connectiion > All profiles > Then i gave a name
This rule works fine and blocks all incoming connections.
Then i want to create a new rule to allow specific IPs using this steps:
Inbound rules > New Rule > Custom > All Programs > All Protocols / Ports > Remote IPs: 192.168.10.5, 192.168.10.10 > Allow the connection > All profiles > Then i gave a name
But 192.168.10.5 and 192.168.10.10 couldn't reach W7 machine.
(If rules are disabled or FW is off; both IPs could reach W7 machine)
Thanks

Hi,
How did you check these two IP address? Through remote access? According to your description, it should only allow remote IP could access this computer. Please also allow local IP for test.
Roger Lu
TechNet Community Support

Allow few site and block all other web sites

Hi i need sample configuration using rogex command to allow few web sites and block to 192.168.2.0 networks and allow full access to 192.168.10 .0 networks . i have configures two inside network

You could try something like the following to allow traffic to specific websites and then deny all other web/https traffic. Keep in mind that in the configuration I am assuming you have two seperate interfaces for the two network connected to the ASA (that could be two subinterfaces or two seperate physical interfaces.
access-list LAN1 permit tcp 192.168.2.0 255.255.255.0 any eq http
access-list LAN1 permit tcp 192.168.2.0 255.255.255.0 any eq https
regex domainlist1 "\.yahoo\.com"
regex domainlist2 "\.myspace\.com"
regex domainlist3 "\.youtube\.com"
class-map LAN
match access-list LAN1
class-map type regex match-any DomainList
match regex domainlist1
match regex domainlist2
match regex domainlist3
class-map type inspect http match-all DomainClass
match request header host regex class DomainList
policy-map type inspect http http_inspect_policy
class DomainClass
    inspect
class class-default
    drop
policy-map inside1-policy
class LAN1
    inspect http http_inspect_policy
service-policy inside1-policy interface inside1
Please remember to select a correct answer and rate helpful posts

Why only one backup being made?

I just noticed that there is only one backup listed in iTunes. Is it intended to only preserve the most recent?
If so, did the developers completely miss the possibility of "I didn't notice I lost that data until after the daily backup sync, now it's irretrievable"
What's the story here?

That a good idea in theory, but not know all the details of how the backup works, I would be a little relucant. For instance, iTunes knows you last backup was Tuesday @ 1730. You replace the backed up copy from Tuesday with one from Monday. Now iTunes does not see the last (and only) backup that it was aware of, but instead sees a different backup. iTunes may see this as some sort of corruption.
I strongly suspect that iTunes makes a notation in one of the iTunes library files when the last backup was made. If this information differs from the backed up files, iTunes would view the backup as being corrupt.
I would just be a little reluctant to try this, given that you may lose a lot of data and settings.
Message was edited by: GregF-ATL

Why are my 'notes' being automatically sent to my mums email account on my MAC.. iCloud is under my email??

My notes are automatically being sent to my mum's email account on my MAC computer... My iCloud account is under my email ?
I have looked through my iPhone settings over and over, and there is nothing to suggest that my notes have been selected to be shared through iCloud.

Welcome to the Apple Community.
Check the phone isn't logged into your account in settings > Mail, contacts, calendars and check your Mac is not logged into her account under system preferences > mail, contacts & calendars.

Why is this statement being repeated?

import java.util.Scanner;
class Main {
    public static void main(String[] args) {
        Scanner sc = new Scanner(System.in);
        System.out.print("Blahdy blah: " + "blah.");
        sc.next();
}Output:
Blahdy blah: blah.Blahdy blah: blah.
I've found that removing the colon fixes this, but could someone please inform me as to why this happens?
Thank you.

Ah, nothing changes. I was getting this problem while I was using Scanner, so I expected that the use of it triggered something, but it does not!
The following code does the same when executed:
class Main {
    public static void main(String[] args) {
        // Apparently anything after the colon that is not a
        // space or blank character will cause this statement to repeat in NB.
        System.out.print("Blahdy blah: a");
}This does not happen when using println, just thought I might add that.

How do I specify the gmail outgoing server if I have multiple gmail accounts in my mail? I have 2 business accounts and when I send mail from one account, it is sent from the other account and the sending email is not from the correct account.

I love my apple email and do not want to use google mail on safari. However, I have 2 gmail accounts set up on apple mail, but when I send mail from one of my gmail accounts (I choose the specific gmail account in the drop down window), it actually goes out as if it is from the other gmail account. I can't have that happen because one is my job, the other is a personal business account and unfortunately, the mail from both gmail accounts want to send through the personal business account. How do I make it send from a specific gmail account? I even tried deleting the accounts and setting them up again hoping I set it up wrong in the first place, but to no avail, it is still doing the same thing except this time I set the job account up first and then the personal business account and now everything goes from the job account! The only good thing is that the incoming messages work properly and they go into the correct inbox. Somebody please fix my outbox!

In Mail Preferences/Accounts/each GMail account, set up the SMTP Outgoing Server for each account separately, going into SMTP name/edit/Advanced and specify the Username of each account. The Outgoing servers must be two different servers, authenticated by the Username and Password of each.
Otherwise, the GMail SMTP server will change the from address to that of the account where the SMTP server was setup.
Ernie

One node RAC pause/hang/block on other node shutdown

Hi,
We have a Java application running on Linux servers connecting to a 10.2.0.1 RAC cluster, also Linux. When the application starts it opens up a pool of connections to the databsae, and these are used throughout the life time of the application. One server connects to one RAC node.
AppA - DBA
AppB - DBB
When we shutdown one node, the application connecting to that node stops, which is what we would expect in this configuration.
What is strange is that the other application blocks for 63 seconds and then continues. So it is like the database is blocking, or the database connections are blocking.
We are not using TAF, FAN, FCN, LB, VIPs or any special features, just simple lightweight JDBC from one server to one database. In fact I do not thing we are unwittingly using any of these features, we have them switched off.
john

user1788323 wrote:
What is strange is that the other application blocks for 63 seconds and then continues. So it is like the database is blocking, or the database connections are blocking.How have you determined/diagnosed the 63s blocking? (more details in this regard may shed some light on the problem)
Assuming that the block is server side, then two basic reasons comes to mind.
Networking issue - the CRS on the surviving node has to perform certain functions, like switching the VIP of the node that left the cluster to a surviving cluster node. The listener may need to re-register services. A local firewall may need to be dynamically reconfigured for supporting the new failed-over VIP. Etc.
Thus these could result in some kind of delay or issue in the network layer that you are seeing from the client side.
Infrastructure issue. If the actual client request via JDBC reaches the server process, and it is slow in responding, then that is not a network issue - instead some underlying service or s/w layer that the server process needs to use to perform the client request is busy for those 63s.
This could be related to the Interconnect, the shared I/O storage layer or something along those lines. For example, how does the Interconnect and/or SAN switch re-act when a server node is powered down or rebooted?
There's not really sufficient information to make anything but a guesses.. You will need to isolate the problem with further testing.
I have seen similar problems with 10.1.0.3 CRS and RAC when a node is evicted from the cluster. In this case the "hung" period was in excess of 15 minutes and only for new connections (Listener unable to hand off to dedicated servers or dispatchers). Existing connections worked fine however and were unaware of any problems. But part of the issue in this case was a poor (outdated) driver layer - and also the last time we used proprietary binary drivers (kernel modules) from 3rd party vendors that results in a tainted (and very fixed and rigid) Linux kernel. Today we're sticking with an OpenSource driver layer only for Linux.

Why are my song being cut off, not all just some?

Some of my songs that I bought on itunes are being cut off when there is about 30 seconds left to the song, both on my iphone and my macbook. I dont know why this is happening. any help would be grealty appreciated.

Are the episodes being shortened when you publish to a local folder and launch them in the browser as well as when published to the server? See this page under "Troubleshooting"...
http://www.iwebformusicians.com/iWeb/iWeb-Tips.html
If the local files are OK it would suggest the problem is on the server. Otherwise you need to troubleshoot iWeb.
If the problem is files that are too large, you can reduce the sampling rate and/or convert to mono if the content is mostly speech rather than music.

Why is one message being repeatedly sent, blocking all other messages?

Similar Messages

Maybe you are looking for