Why is the full screen button missing in iPhoto11 after Lion upgrade?

I upgraded to iPhoto11 with Snow Leopard with no problems. Loved the new look and full screen view. Now that i've installed LION iPhoto appears to have reverted back to the iPhoto 09 look. For example, the full screen tab is missing....  WTH???

I think the problem is that the full-screen button has been moved in the Lion apps. In Snow Leopard it used to be the bottom left, in Lion it is in the top right corner. Is it there in your case?

Similar Messages

  • Why is the Share Screen button missing?  Anybody?  Anybody?

    I have a MacBook Air OS X.5.5, MacMini OS X.4.11, and an older PowerPC OS X.4.11 all connected to a local network (the older PowerPC ethernet - other two wireless). I've setup Tiger on both the Mini and the PowerPC to allow Apple Remote Desktop and setup the Access Privileges on both . . . "allow user to do" everything.
    Using Leopard on the Macbook Air, I have a "Share Screen" button for the Mini, but I have no "Share Screen" button for the PowerPC. I've tried everything I can think of . . . nothing seems to work to make the button appear . . . Any ideas? Anybody?

    Hi Janet,
    Make sure that the File Sharing access is ticked on in Sys Pref/sharing & and that the Screen Sharing access is ticked on in Sys Pref/sharing. (This is only applicable in SysPref OXS10.5)
    In Tiger - make sure that in Sys Pref/Sharing/Services/Personal File Sharing is ticked on.
    Did you try ticking the 'Guests may request permission to control screen' in access privileges - that may jog it?? I just connected to my laptop on 10.4 in this manner allowing permission at the laptop end, by doing so I knew the connection was available.
    Short of that I'd install Leopard on all machines then screen sharing doesn't require the ARemoteDesktop to allow permission - it's replaced by a simple 'screen sharing' button.
    You can also share screens via ichat under Leopard 10.5.
    The other issue maybe how you have your network plugged - is your router that the PPC is plugged into the same unit that sends the WIFI signal? If there is two devices you may need to bridge the connection - as they are most likely sitting in separate IP strings. If you can plug the PPC into the same device (Airport Extreme?) then do that also. Good luck.

  • Why is the full screen too large ever since the new iTunes?

    I can't see the scroll bar on the right and some options are hiding behind the task bar at the bottom

    I think the problem is that the full-screen button has been moved in the Lion apps. In Snow Leopard it used to be the bottom left, in Lion it is in the top right corner. Is it there in your case?

  • Why is the update all button missing?

    Self explanatory.

    @PogoPossom: Thanks for your efforts in answering this question. I faced the same mystery of the Update All button missing, even though I'm logged in. I tried powering down the iPad and restarting and that fixed the issue - now the Update All button appears. Is this a bug or a feature? 

  • Where is the full screen button in itunes

    I used to be able to click on the expand button on the bottow of the cover flow now its gone, my itunes doesnt have the cover flow view either. How can i change it back to the way it was before the update?

    There is no Cover Flow in iTunes 11.
    To enter full screen mode, click the (diagonally pointing outward) arrows in the upper right corner of the window.
    Good luck
    srb

  • How to get full screen on call of duty after mavericks upgrade?

    Can't get a full screen on 27" iMac for Call of Duty after upgrading to Mavericks?  Anyone know how?

    The double arrows in the upper right hand corner of the window.
    or View > Enter Full Screen on your Menu Bar.

  • Screen saver no longer working after Lion upgrade.

    Hi,
    After standard upgrade about 2 weeks ago (mid July 2012) the screen saver no longer works. I mean I can certainly access the application and the desktop can be made to cycle through different photos etc. But when I configure the screen saver it just refuses to go into screen saver mode at all.
    I'm not seeing too much occurance of this through the postings which is a bit worrisome as I'd thought this would be a much wider issue.
    Cheers,
    Herbie

    Please follow these instructions:
    Lion: Connecting to legacy (pre-Lion) AFP services - and Mac OS X (server):
    https://discussions.apple.com/thread/3258472

  • Why is the panorama tab button missing from my tab bar

    Just downloaded Beta 4 and find the panorama button is missing from the tab bar. Your video showing how to manipulate tabs show the button on the right hand side of the tab bar, on my download it is missing why, also some of the other bars shown in your video are missing to, why??

    You can add it if you want, right-click on a toolbar and select Customize. You can then drag and drop the "Tab Groups" icon from the customize toolbar dialog onto the toolbars. You can use this method to add other icons to the toolbars.

  • Why is the "Reset Firefox" button missing??

    I have several FF preferences and add-on preferences that will not stay after a restart. I set them, but after I quite and restart FF, the old settings are back. I dutifully followed the mozilla support-site instructions and tried all options to fix the issue:
    1) check for locked preferences--nope, not locked
    2) User.js overides -- no such file
    3) Reset Firefox to default -- not possible "reset" button is completely missing
    I've used the reset several times, now, which was quite disheartening. But, it is very suspicious that I cannot find the reset button at all, now.
    Someone seems to have asked this before, but the answer to just make a new profile was horrifying. Either this button is supposed to be there or it isn't. If it is supposed to be there, then this is an extremely serious security problem. Something is wrong and I must find out what. Why is this happening?

    You only see the reset button on the "Help > Troubleshooting Information" page if you use the profile that is marked as Default=1 in the profiles.ini file.<br />
    If you do not have the "Reset" button then either use the Profile Manager to create a new profile or use the Profile Manager to start with the current default profile to get the reset button in Firefox.
    *http://kb.mozillazine.org/Profile_Manager
    *https://support.mozilla.org/kb/Managing+profiles

  • Why are the back/forwards buttons no longer working after upgrade?

    Hi, I recently upgraded from Firefox 3.5 (I believe) to Firefox 4.0.1 and now the back and forwards buttons no longer work. I tried resetting the settings under the toolbars > customize, etc. That didn't work. FYI, I'm using a mac. Any solutions? Thanks in advance...

    A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    * http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Why No Picture When Full Screen Button Is Pressed?

    When I open up IPhoto all the thumbnails load OK. Yesterday I tried to show my grandson some of his younger pictures taken 3 years ago by hitting the Full Screen button. What we saw was a dotted frame with an exclamation mark inside. To my dismay many of my older pictures display the same thing. How do I solve this problem?

    If you deleted pictures then you moved and altered things. Then rebuilding won't work.
    You'll need to create and populate a new library.
    To create and populate a new library:
    Note this will give you a working library with the same Rolls and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
    Move the iPhoto Library to the desktop
    Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
    Go into the iPhoto Library on your desktop and find the Originals folder. From the Originals folder drag the individual Roll Folders to the iPhoto Window and it will recreate them in the new library.
    When you're sure all is well you can delete the iPhoto Library on your desktop.
    In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
    Remember: It is strongly advised that you do not move, change or in anyway alter things in the iPhoto Library Folder as this can cause the application to fail and even lead to data loss
    You do everything in the iPhoto Window - there is simply never a need to do anything in the iPhoto Library Folder. Ever.
    To delete pics: in the iPhoto Window put them in the iPhoto trash and then go iPhoto Menu -> Empty Trash. This removes pics from the Library and the HD.
    REGARDS
    TD

  • Why my numbers doesn't have full screen button?

    iOS5.1
    Numbers1.6
    I'm reading the guider now, it says that in the upright corner there is a full screen button, but I can't find it. Anyone help me?

    The new version removed the full screen button and functionality. I am not sure if they have updated the document your reading or if you downloaded an old version of the documentation.
    Jason

  • How to disable the FULL SCREEN option in the 'Insert Video and Audio' option

    Hi,
    I've been inserting some MP3's and using an image for pupils to click on to play the sound, the images are 100 pixels by 100 pixels.
    The only issue is that I have the grey rectangle 'Full Screen' box over the picture. This is ideal when I put videos on but not necessary when you have just an MP3. Also I've noticed that the 'Styles' option is greyed out and due to that I can't change the
    colour of the play button.
    I've been inserting MP3's direct from my PC hard drive to the webpage.
    Any help'd be greatly appreciated.

    Hi,
    Per my understanding, you might want to disable the “Full Screen” button and make other customization when there is an audio file in the page.
    By default, when we insert an audio/video file into page via “Insert Video and Audio” button in the ribbon, an OOTB Media Web Part will be added into the page contains
    the file you added, the “Full Screen” button is a part of this Media Web Part.
    In consideration of you might have other requirements on designing the style, I would suggest you create a custom Media Web Part instead which will enable you customize
    the style as you want.
    About creating a custom Media Web Part, you can use the <audio> tag:
    http://www.w3schools.com/html/html5_audio.asp
    http://www.catswhocode.com/blog/mastering-the-html5-audio-property
    http://www.elated.com/articles/html5-audio/
    There are also other powerful JavaScript audio plugins:
    http://kolber.github.io/audiojs/
    http://jplayer.org/
    Best regards,
    Patrick
    Patrick Liang
    TechNet Community Support

  • Full screen button in MS Word for Mac 2011?

    Does anyone know how to add the full screen button (two diagonal arrows in the top right hand corner of most apps) to MS Word for Mac 2011? I don't want to use full screen mode. I just want to get Word to fill the screen without manual adjustment.

    I recently had my hard drive replaced and had to reinstall Microsoft 2011. I know for a fact that I had the diagonal arrows before and now they are gone. I have searched high and low on how to get them back on with no luck.

  • How disable the full screen option in the standard or wireframe video player ?

    I was wondering if (and how) it's possible to just disable the full screen option in the controls that appear below the video player (standard or wireframe).
    I want to have a video player with the progression bar, play / pause options, the counter without the full screen option because: "When someone clicks the Full Screen button during playback, the video opens in a pop-up window. Any interaction used to transition to a new state in the application does not work."
    http://help.adobe.com/en_US/flashcatalyst/cs/using/WS4bebcd66a74275c3-326fcb52123816c0204- 7fed.html
    Thanks for your help.
    //Catalyster33//

    I don't think so from within Flash Catalyst. That is all part of the component. I took a quick look at the docs, and did not see that element at as a parameter. There are only two options I can think of: either build a custom controller in  Flash Catalyst (which may not have all the same functionality as the stock controller) or take your project into Flash Builder and modify the controller skin there.
    Chris

Maybe you are looking for