Why is the green progress/control bar at the bottom of the screen inaccessable or visible only as a very narrow bar at the far left side of the screen?

When trying to watch online movies in full screen mode, the green control/progress bar that should appear at the bottom of the screen is sometimes covered by another screen, and sometimes appears as only a very narrow green bar at the far left edge of the screen. This problem does not occur in Safari. I have tried full screen mode with all plugins disabled, but this did not cure the problem. This is a fairly recent development.

In the music app play a song and when the song starts to play in the screen where the progress bar was tap in the middle of the screen and it should be back. I had this problem too but then i figured it out. And trust me if u do that it will be back. If that doesnt work tell me.

Similar Messages

Windows 7 icons disappear/reappear Green Progress folder bar issues with slow performance. HELP!!!

Hi there, I hope someone can help me. This all started about a week ago. So I tried a fresh reinstall from my recovery disk. to no avail. Ok I have Home Premium 64bit and it seems my icons in my user folders and subfolders and the actual file icons are
blank stand ard or missing. after a while they reappear to normal. the green progress bar in the explorer folders always lags and never fully completes. It hangs. Now I see that it takes 30 secs to get a program to open. Currently my control panel screen is
blank and my connection between my ipod touch 5g and my desktop is very slow at data transfer. I'm going bonkers! The only things I altered was turning off WMM in my router, Installed a software someone gave me (only to find out it was a crack software) deleted
that first! and used CCleaner to clean my registry

Hi,
So a total reinstall didn’t fix the issue?
We may take a try with the following article to make Windows a better performance.
Optimize Windows for better performance
http://windows.microsoft.com/en-hk/windows/optimize-windows-better-performance#optimize-windows-better-performance=windows-7
Then, please check to see if any new updates available, also the related drivers, make sure they are up-to-date.
After that, if issue insists, please refer to the following article to run chkdsk command in CMD to check if there are disk issue.
http://technet.microsoft.com/en-us/library/bb491051.aspx
Best regards

Why do i get a fuzzy print ... black only... at the far left side of the page?

I get a fuzzy print at the far left edge of the page BLACK INK ONLY.... It appears that the ink is low but I get no message and the rest of the page if fine. I did the auto print head cleaning and tried 3 time to realign the print head but keep getting "unsuccessful" after the first alignment test page prints. My black ink cartridge is NOT HP.. it's after market.. could this be my problem with the print and alignment?

Hi @Wally-Bird ,
I see that you are experiencing issues when printing in black, you are getting fuzzy printing on the left side of the page.
I would like to help you out today.
HP recommends that you use genuine HP cartridges. HP cannot guarantee the quality or reliability of non-HP cartridges, or refilled HP cartridges. The following solutions might not resolve your print quality issue.
I have provided a document with some steps to try to see if that will resolve the issue.
Fixing Print Quality Problems for the HP Officejet Pro 8600 e-All-in-One Printer Series.
If the issue continues, try the steps in these documents. Disregard the titles.
An 'Ink Cartridge Failure,' 'Incompatible Ink Cartridges,' or 'Ink Cartridge Problem' Error Message ...
'Missing or Failed Printhead' Displays for HP Officejet Pro 251dw, 276dw, and 8600 Printer Series.
If you are still having issues, replace the cartridges with Genuine HP cartridges.
Have a fantastic day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Flex 4: Change the color (or other properties) of the Control Bar

Can the control bar color and other properties be changed?
Thank you.

look for

                    <s:Rect left="1" right="1" top="2" bottom="1">
                        <s:fill>
                            <s:LinearGradient rotation="90">
                                <s:GradientEntry color="0x000000" />
                                <s:GradientEntry color="0x005500" />
                            </s:LinearGradient>
                        </s:fill>
                    </s:Rect>
in the style generated ..you can change the fill to any of the types like solidColor, all gradients, in addition, you can add stroke element to this rect, thats all I know, if you know any other properties that can be added here, you can let me know.

InDesign Control Bar Out of Order

I am working in inDesign CS5.5 and my "Control bar" switched order from left to right. The "Character" panel and the "Paragraph" panel are flip-flopped. I tried the "Customized" option but it will not let you put them in order, just add or subtract panels. Also tried resetting my saved workspace, restarting, right clicking.... Any ideas on how to switch the two panels back?

It is as designed.
When you click on the "A" symbol, which is above the Paragraph symbol, both at the left end of Control Bar – the layout will change. And when you click the Paragraph symbol again – it will change back. There are 2 layouts.
Tomek

I am using AOL and my refresh is on the far left I do not see a small circle with a line through it

Sagebrush - I am using AOL and my refresh is on the far left side of my adress box and I do not have a small circle with a line through it. I am computer dumb so bear with me.please.
Message was edited by: Nana Noland
Mike - I am using Windows 7 and I think my browser is Internet Explorer and I always use AOL to sign in.
Thank you for any help you can give.
Message was edited by: Nana Noland

While AOL uses IE as it's browser engine, it's and older version of IE (IE8) that DOESN'T have ActiveX filtering. Only IE10 and IE11 have the filtering.
BTW: If you have AOL software installed, (unless you're on a dialup connection and you NEED it to connect), you're basically taking up nearly a gigabyte of hard drive space for software that DOES NOTHING that the AOL website can't already do with Internet Explorer, or another browser. I was a "Windows/Mac connectivity specialist" for AOL in 2002 & 2003, and their software is what we geeks call "bloatware", meaning it's FILLED with all kinds of stuff that you'll never possibly use. My advice would be uninstall it altogether. Download Firefox. It's a much better browser than AOL or Internet Explorer. Download and install the Flash Player Plug-in (All other browsers) and the Shockwave FULL Installer (All Other Browsers)
For ALL your AOL content, use your Member name and password to login at http://www.aol.com/ where you'll find your AOL Mail, AOL Headlines, your AIM Buddy List, and EVERYTHING that was part of the AOL software, only it's ALL on AOL's servers, not your hard drive.

Re: Apple TV: What do the circles on the far left "List" column mean?

Re: Apple TV "List Page", what do the circles on the far left side column of the page mean. Some are solidly shaded, others are half shaded. I don't know how to interpret them.

The blue dots are supposed to mean the show is un-watched. If you have a half one it mean partailly watched. No dot means it has been watched. They are not reliable though. They seem to suddenly change at random times. Sometimes out of no where whole seasons will show up unwatched out of now where. Or seasons I have not watched will suddenly all lose their dots.

What makes applications "snap" to the left side of the screen & get smaller

On occasion, an application such as Word will suddenly move from its normal location on the screen over to the far left side of the screen, with the top left corner of the pane in the top left corner of the screen. The application pane size reduces to about half its width.
I know I've read or seen something about this, but can't remember where - something about applications resizing to the "best" size for the screen and other open applications. Can anyone enlighten me - I'm hoping there is some setting or keyboard shortcut that is responsible, and can be unticked!

I don't know if this will help but:
I have had this happen to me lots of times. But it only seems to happen in applications that don't support Spaces, or have problems dealing with Spaces. I only get windows to resize when I overload my system with a lot of things, (multiple Safari windows, multiple Finder windows, multiple Photoshop windows, etc...) I have discovered that the only applications that try to resize themselves are Safari and Word.
I theorize that there is something inside of OS X to help CPU load, and that is one of the functions (smaller windows on the 1st Space take less CPU then large ones on other Spaces.) When I was board, I tried playing around with this, and the aforementioned case seemed to be true for me, but I have no idea. It could have all been coincidence.

Is there a plug-in or a way to remove the green progress bar from the address bar/AwesomeBar?

Much as I love Firefox, I'm not overly enamoured with the wee green progress bar that's integrated into the awesomebar in 5. As I have Status-4-Evar installed, I really don't need it, and I find it kinda ugly, to be honest.
Are there any plug-ins or preference options to make it go away, or am I stuck with it until my brain just learns to ignore it?

Use the options in Status-4-Evar, on the "Progress" tab, uncheck "Show progress in the Location Bar". There is now an icon "S4E" on the location bar or use the options through the add-ons manager.
For more information see
*Status-4-Evar Addon Bar Customization<br>http://dmcritchie.mvps.org/firefox/status4evar.htm

Why do the podcast controls shift behind upper bar?

Why do the podcast controls shift towards the upper bar when you close the app, double click the home button, swipe to get to the controls, press play, listen to the "video podcast" for a few min (like you would if you wanted to listen to the podcast for a while instead of watching) and then return to the video? The video controls are shifted.

I've often experienced this sort of behaviour in CS3 on WinXP. It happens when I've been working on the same file for a long time, and it seems to indicate that I'm running out of memory (particularly VM?). Minimize/maximize gives temporary respite, Save As a bit longer, but eventually I have to close down ID and restart. I usually reboot at the same time just to make sure. Then I'm good to go for another few hours.
Noel
[Smart little film, by the way.]

Why is the green bar in the timeline so short? it doesnt get any bigger. I use cs4

Why is the green bar in the timeline so short? it doesnt get any bigger. I use cs4

but even though I have a layer it doesnt go long shooternz

Server 2008r2 and windows 7 pro slow to no networkshare file searching and file access (green progress bar)

we are running a windows server 2008r2 sp1 domain controller and a 3com gigabit switch to which 7 windows 7 pro computers are connected. We are only using the windows server to distribute a few printers and as a network share (z drive).
we are storing all files (word documents only) centrally on the server (z share), and files are accessed and written to the z share.
Problem is that file access from the z share on the windows 7 client computers is at best buggy. we are able to browse the z-share, but as soon as we want to search the z-share for files (f.i. use file explorer with "content: memorandum") the green
progress bar shows and no search is performed. something like alphabetically sorting a directory on map/file name on the z-share also shows a green bar with no sorting. manually going to the files works.
One thing i noticed, sometimes not all files that one user created and stored on the server is visible and can be found by another user. I prefer to disable all offline file caching setting, because that feature is not used. no files should be made accessible
offline. i don't know where to change that on the server side.
I am reluctant to experiment on the server end (2008r2 sp1), so i tried a few suggested solutions on the client end (windows 7 client)
I tried disabling offline file caching
i tried properties (z share) ==> advanced and map optimizing and several options there
i tried disabling the smbv2 protocol and disabling the smbv1 protocol (using
sc.exe config lanmanworkstation depend= bowser/mrxsmb10/nsi command etc. posted by microsoft)
i tried disabling windows defender
i tried accessing the z share via ip and server name (the share is mapped via its servername, e.g. dennis-dc1\share). still the same
file searching on the clients c drive ('own harddrive') works much better, file searching on the server also works.
any suggestions or solutions that i can test on the client side, as mentioned i am reluctant to change something on the server side. if a solutions works, i prefer to change it on the server side.

Hi,
The issue could be due to windows indexing service taking long time in sorting and searching in mapped drives. Please try the steps belwo to disable windows indexing service or search service on the windows 7 client to resolve the issue.
You can click on Start and select Control Panel, click on
Programs and Features, go into the Turn Windows Features on or off section Scroll down the list and uncheck the box next to Indexing Service or Windows Search.
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Can I apply more than one keyword to images from the Control Bar?

I swear this used to work. I select multiple images in a project. I apply a keyword to the selection by clicking a keyword button on the Control Bar. It gets applied to all the selected images. I click another keyword - it gets applied to only the first selected image.

Michael, thanks for that quick response! Yes, that was it. Of course I don't know why I would have selected that option. It would seem to make sense to put this option in the Preferences instead of Edit - it would make it less easy to change accidentally.
Regards,
Francis.

Hi, I can't figure out why I can't render on my timeline. I highlight the segment hit "Apple-R" and it gives me a weird message about "conforming HDV video...." and the bar goes as far as 60-66% and holds there forever. It never renders even partially.

Hi, I can't figure out why I can't render on my timeline. I highlight the segment hit "Apple-R" and it gives me a weird message about "conforming HDV video...." and the bar goes as far as 60-66% and holds there forever. It never renders even partially.

Yes, I know. I have been working with HDV for some time. I am wondering why it doesn't render when it needs to.. the red and bright-green lines are above, and I've set the render settings such that ANYTHING I highlight and hit apple-R will render. But its not rendering at all.

Received a warning about a virus and a green progress bar started a download

''Duplicate post, continue here - [/questions/764207]''
Hello. I was on a website the other day and all of a sudden there was a warning that came down from the top of the browser. It was a grey warning box. Said something like your computer has a virus or is infected, etc. and will be checked for the virus. I could click on "ok" or "cancel". I clicked cancel but there was a green progress bar that started to show that a download was taking place. I forced quit right away but when I opened firefox it gave me the webpage again with the warning. I hit cancel again and the same thing started to happen (showed a download in progress with a green progress bar on left side of screen). I immediately closed all the firefox windows I had open. When I clicked on firefox again everything was fine. The new window went to the apple website page and everything seems to be working fine. I use a mac. Has anyone else gotten this warning before? And should I be worried that my computer was infected by a virus? I don't have an anti virus installed on my computer. With mac I always just keep the security updates up to date and I'm usually fine. I just want to make sure my computer didn't just get a virus. Thanks for the help!

Thank you so much for your post. I really appreciate your answer!
Are you able to suggest any sites that are safe to download free antivirus programs for Mac? I have heard that sometimes those programs, like Norton for Mac, can significantly slow down the computer and cause other issues. Is this true? If so, is it recommended to install a program like Norton, test for viruses, and then uninstall?
Thanks again for your help!

Why is the green progress/control bar at the bottom of the screen inaccessable or visible only as a very narrow bar at the far left side of the screen?

Similar Messages

Maybe you are looking for