Why is the SHB12x-B12X LVDS cable made with the connections reversed on each end of the cable?

Why is the SHB12x-B12X LVDS cable made with the connections reversed on each end of the cable? Pin 1 on end end of the cable maps to pin 73 on the other end of the cable, etc.
Attachments:
LVDSCableFlipPic.png ‏32 KB

Hello sholm,
The NI SHB12X-B12X LVDS cable is used to interface with specific devices which use the12X InfiniBand connector. The online product page for this cable recommends using the NI SHB12X-B12X cable to connect the 12X InfiniBand connector on the NI 656x high-speed digital instruments with other NI accessories such as the NI SMA-2164 to break out cable signals for direct access.
NI SHB12X-B12X LVDS:
http://sine.ni.com/nips/cds/view/p/lang/en/nid/201704
NI PXI-6541:
http://sine.ni.com/nips/cds/view/p/lang/en/nid/13820
NI SMA-2164:
http://sine.ni.com/nips/cds/view/p/lang/en/nid/201705
Correct communication between the devices mentioned above requires that the connections be reversed.
Regards,
J_Bou

Similar Messages

Why is it that when I connect my iPhone 5S to my Windows Vista computer, the photos made with my iPhone are all of very low quality and most of them are turned upside down?

Why is it that when I connect my iPhone 5S to my Windows Vista computer, the photos made with my iPhone are all of very low quality and most of them are turned upside down?
On another note, the iPhone tells me that it's ''busy'' when opening a photo on the computer.
(I tried restarting my PC, connecting via another USB port, importing using PhotoStream, etc...)

Are you using the front or rear camera? When you say they are low quality, are you referring to file/pixel size, or how the picture looks? As far as upside down, how are you holding the phone? Older versions of Windows have issues reading the Metadata from the pictures and will not display the same.

Youtube videos I placed in a site made in Muse, don't have sound and don't auto play in my Android phone. Can anyone tell me why? The same video has no problems when I watch it at the youtube site on my phone. It has sound on an iphone, but doe

Hello. The Youtube videos I placed in a site made in Muse, don't have sound and don't auto play in my Android phone. Can anyone tell me why? The same video has no problems when I watch it at the youtube site on my phone. It has sound on an iphone, but doesn't auto play either. Thanks!

Hi Mariana,
Please make sure you have the autoplay checkbox selected from the fly-out options:
Regards,
Akshay

Why is the cable for the shuffle so short

why is the cable for the shuffle so short<should there be 2 cables.I have to havemy ipod dangling from the side of my computer(i have an all in one)

Assuming you have a 4th gen shuffle, it should be fine hanging off the computer, since the shuffle is so light. You can think of that cable that comes with the 4th gen shuffle as being more of an "adapter."
If you want a long cable, you can buy the replacement part. It comes with both a short adapter (like the one you have) and a long cable.
http://store.apple.com/us/product/MC003ZM/A/apple-ipod-shuffle-usb-cable
I use a USB hub, which I can conveniently locate on my desk. I connect the shuffle (and my other iPod/iPhone) to the hub. If you want a hub, make sure you get one that is self-powered (it has it's own power supply).

Why don't pictures from a slideshow made in iPhoto and then burned on to a DVD in iDVD not use the full screen?

Why don't pictures from a slideshow made in iPhoto and then burned on to a DVD in iDVD not use the full screen?

All I want to do is send my family the pictures for them to be able to see them on most dvds and use manually control.
If you want set top DVD player playback, I suggest you create a a series of slideshows IN iDVD that each contain a MAXIMUM of 99 images. Do not create the slideshow in iPhoto or iMovie.
Is there an easier way to do this, bypassing iDVD?
Some DVD players will play a disc containing jpeg images

Why can't I save changes I made to a photo using the zoom feature?

why can't I save changes I made to photo that I use the zoom feature. I zoom in and set it the way I want but when I click done it reverts the photo back to it's original size.

When you zoom you're not chnaging the image at all, just looking at more closely, like using binoculars. Using binoculars doesn't actually bring the object closer. So with zooming. I think you might want to explore cropping.
Regards
TD

Why in the world does it cost sooo much to replace a logic board for your water damage macbook pro? As if apple hasn't made enough money to allow some people to save some money for their laptop..

Why in the world does it cost sooo much to replace the logic board for your macbook pro.
As if apple hasn't made enough money to allow some people to save some money..

Do you think Apple should reward your clumsiness or lack of caution by giving you a logic board for free, or at cost? Come to think of it, shouldn't they just give you a free new computer, and be grateful to you for taking it off their hands?
Apple isn't a charity operated for the benefit of the careless.

Why Synonym becomes INVALID when changes are made on the related object ?

Hi all,
WHY SYNONYMS becomes invalid when changes are made on related OBJECTS ?
Is there any specific reasons for this.?
Is there any method or procedures to make the synonym VALID as soon as the we perform any alteration on the related object.
Thanks
Himabala

Synonym will be validated when it is accessed, no need to take an action.

Why does no one make this cable?

Common problem: If you have your iPhone in a case, you won't be able to dock it to external speakers.
A simple solution would be an extension cable, 30-pin female to 30-pin male. I finally found one made by CableJive, which I bought from Radtech. However, it won't work because I'm using an Otterbox Defender case (which is excellent), and the case is designed to accept an Apple cable. While the electronics probably work, the plastic piece that surrounds the female end, which should be able to plug into the iPhone is not the same shape as the original Apple part, so it interferes with the case. It makes no sense to my why CableJive, who must know that their product will be almost exclusively used with iPhones and iPods, would shape that piece differently than Apple did.
I have no confidence that a second party product will work. I will probably use the original Apple cable on the iPhone end, but it's a male USB on the other end. Now, I have to figure out how to convert a male USB to a 30-pin female.
Can anyone help me?

Hi Dan,
I have a competitor to the Cablejive: the Sendstation Dock Extender, and am trying to use that with an Otterbox Defender case. This Dock Extender also has excess plastic that interferes with it connecting to my iphone with the Otterbox case. Can you please give me details about how you filed off the corners of your extender?
Thanks,
Nancy

Why is the LinkSys WET11 still expensive?

I'm needing to connect my 8 yr old daughter's CRT iMac to my wireless LinkSys router so I was going to go with the LinkSys WET11 route. I bought my router for about $40 after the rebates, why is the LinkSys WET11 still twice that? Cheapest I've found it is around $75, does that sound about right?
http://www.macmall.com/macmall/shop/detail~dpno~507258.asp
I can get the above adapter at my Best Buy for 19.99 after rebates, are these not worth it even for my daughter who only plays Flash games on her Barbie website a few hours a week? Her computer is about 20' away in the next room.
Thanks!,
Wesley

The install is really simple.
Set the device to "Client" with the switch on the bottom.
Plug the ethernet plug into the ethernet port on the iMac and the plug the USB cable into the USB port for power. If the port is not available, you can just use the supplied transformer.
Open your browser and Type "http://192.168.0.30" in the URL box unless the included instructions give you a different address to use. This will begin the communication between the device and the computer.
A login screen will appear. Type "admin" for the user name and leave the password blank. Press the enter key.
The home screen will appear and give you a lot of selections that may seem kind of scary. You really don't have to worry about them. Select the "Run Wizard" option.
The next screen shows you the steps that follow.
Select the "Next" option.
The next screen allows you to change the username and password for the device. Use your own judgement here if you want to make any changes.
Select "Next" from the bottom.
The next screen allows you to select the wireless network connection you want. I recommend you choose the "Site Survey" option and allow it to find your wireless system. Then select it and Select the "Next" option at the bottom.
The next page allows you to select encryption if you want to use it. Do what you want here. (I left the encryption off for my own reasons.) Then select "next"
The next screen tells you that the setup is completed and that you need to restart the device. Select "Restart"
The next screen will prompt you to close the wizard and will return you to the home screen.
Close your browser.
I am running OSX10.3 so I went to system preferences/network and made sure that the etherent showed it was connected. Voila!
Open your browser and you should be connected.
All of this assumes that there aren't unusual setups or preferences already set.

Why does the screen on my iPad mini jump around? Apps open and close, I can't get back to the home screen. Is my mini possessed?

Why does the screen on my iPad mini start jumping--larger, smaller--can't close apps. I reboot and still it happens. Any suggestions?

If the unit has NEVER been jailbroke, first try a system reset. It cures many ills and it's quick, easy and harmless... Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this.

Why is the internet faster on my 3-year-old Macbook Pro than on my iPad???

Though I love my iPad, I am puzzled why surfing the web is so much slower on the iPad than on my three-year-old MacBook Pro. I have a cable modem and an airport extreme. Loading the same pages on Safari, the MacBook is much faster than the iPad. Is this normal? Could something be slowing down the connection to the iPad?
Thanks!
Steven

Even a 3 year old MacBook has 4 times the CPU power and about ten times the RAM of an iPad.
You can run speed tests on the iPad and make sure that you don't have a connection problem.

"Why Does The Shuffle Songs Feature Perform So Poorly?"

How'dee,
I have an iPod 160G Classic, I've spent the last 3 months taking my 2,247 "Owned" cd's (I'm a retired dj), an ripped them with identical settings and transfered them flawlessly onto my iPod. I now have a total of 26,311 tracks on my iPod. "FWI"- I tranfered each "Complete" album, no individual tracks... I had been looking forward to being able to Shuffle through my music and not actually listening to individual ablums at a time. I work as a security guard and I am able/allowed to use my iPod via my Bose dock.
I have been listening to my iPod in Shuffle Mode for 3 full weeks now and I am finding that I'm continually listening to the same 30 or so albums out of the full 2,247 that are on my iPod, sometimes it will actually play a song from a perticular album and then play Another track from that same album within the next 10 - 15 tracks!
In the end I'm hearing One New Track that I haven't heard yet every 15 - 20 or so tracks while at the same time I'm hearing tracks from the same albums and or groups throughout the 15 - 20 tracks that have played... As an example, I have 4 albums from the group KISS, I hear tracks from those 4 albums atleast 3 - 5 times every day - day & half... Why does the Shuffle Mode work so poorly? I can't see for the life of me why the so-called "Shuffle Mode" doesn't Shuffle through "ALL" of the 2,247 tracks that are on the iPod.
I've even gone as far as to use a cable to plug my iPod into a regular radio allowing me "Not" to charge my iPod until the battery is almost dead, allowing it to play continuously for my entire 8 hour shift in Shuffle Mode. And then just resume the next shift for another 8 hours, again, until the battery is almost dead. I've gotten around 35+ hours per charge over the last 2 weeks.
"My whole reason for spending $350. on this iPod was so that I could listen to my album collection as though I were listening to a radio... shuffling through "All" of my tracks. I'm now sitting here kicking myself in the a$$ for seemingly wasting my money..."
Any insight would be appreciated.
And just to let it be known, I have attempted to play tracks manually just to see if they are even workable transfers and I haven't come across any problems with the music that I put on the iPod.
The ToxicOne...

It is true - "random" does not mean that you should not hear two songs from the same album (or artist) in close proximity. However, as the number of albums increases, the likelihood of hearing multiple (sometimes three or four) cuts from the same album decreases. And the chances of this happening EVERY time a new shuffle is started is even less likely. Comparing flipping a coin (a 0.5 probability of any given result) to a library with over 2000 albums (a .0005 probability of a track from any given album) is comparing apples to oranges. Also, given one of the posts above which indicated hearing the same *progression of songs* indicates that the mathematical algorithm used by Apple to simulate randomness (as there is no such thing as true randomness in computer programming) is just not up to snuff.

How come although iPads are getting more powerful, the iOS apps from apple are so mediocre and just not that great? We spend all this money for the latest ipad and all we get is these $5 video and music apps from apple. Why create the iOS platform and onl

How come although iPads are getting more powerful, the iOS apps from apple are so mediocre and just not that great? We spend all this money for the latest ipad and all we get is these $5 video and music apps from apple. Why create the iOS platform and only offer so so apps like IMovie and GarageBand ? While other developers are offering much better apps like pinnacle studio for video, Cubasis and Auria for music production, apple has not showed much growth in terms of innovation. While there's nothing wrong with making an app like GarageBand where "anyone " can make a song, how about something for real musicians or an app not so basic as it get for video editing? After spending 0ver $700 on an ipad I'd be willing to spend more than $5 for a better video or audio app.

First, try a system reset although I can't give you any confidence. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Help! Why is the Pre's speaker ringing an incoming call when I have a headset on?

Hi all,
I just had the most embarrassing thing happen to me today.
I was listening to some music on my Pre with the headset (that came with the Pre), and I received an incoming call.
I heard it ring and answered the call, no problem what I thought!
When I got off the phone, my co-worker complained that I had the volume on the Pre too loud. I looked at her and said WTF, I said you heard the phone ring. She said yes!
I then did a test, I exited the music playing, and opened the phone app and make a phone call out. So I made sure that the icon in the phone app showed that I was using the headset.
Then I ended that call, and used a land line and call myself on the Pre.
The Pre rang both in the headset and also the speaker the Pre?
Why is the Pre using the speaker when the phone rings if I'm using a headset?
Isn't the purpose of the headset to provide privacy and keep my neighbors from being disturbed?
I read about the switch turning off the ring but not the music, but this wasn't a case where I needed to use the switch, I had the headphones on.
Why is this happening, is this a bug ... or is there some sort of setting that I don't know about?
Thanks!
Rob
Post relates to: Pre p100eww (Sprint)

I'm having the same problem. I had a plantronics 975 (which I lost, sadly). When connected, the ringer would always be routed through the bluetooth and the iPhone's external speaker. When in silent mode, the iPhone would only vibrate, but I could still hear the ringer in the bluetooth.
I just bought a new Plantronics Voyager+. Now when it's connected, all sounds are routed to the earpiece - including the taps, etc. The iPhone's speaker doesn't ring at all, unless the bluetooth is disconnected or powered off. I'd really like to be able to hear both, like I was before. This is an iPhone 3G running iOS 4 (latest version, not sure what it is exactly). Haven't updated software/firmware in between bluetooths, just changed the earpiece.

Why is the SHB12x-B12X LVDS cable made with the connections reversed on each end of the cable?

Similar Messages

Maybe you are looking for