Why is this session not connecting to the preferred Instance ?
Grid Infrastructure/DB Version : 11.2.0.3
Platform : RHEL 5.8
We have a 3-node cluster and I've configured the RAC service PKDS_UAT_01 with its preferred instance as JDSCFS3
$ srvctl config service -s PKDS_UAT_01 -d JDSCFS
Service name: PKDS_UAT_01
Service is enabled
Server pool: JDSCFS_PKDS_UAT_01
Cardinality: 1
Disconnect: false
Service role: PRIMARY
Management policy: AUTOMATIC
DTP transaction: false
AQ HA notifications: false
Failover type: NONE
Failover method: NONE
TAF failover retries: 0
TAF failover delay: 0
Connection Load Balancing Goal: LONG
Runtime Load Balancing Goal: NONE
TAF policy specification: NONE
Edition:
Preferred instances: JDSCFS3
Available instances: JDSCFS1
Then I start a remote session through SQL*Plus like
sqlplus scott/tiger@rtfms-scan:1624/PKDS_UAT_01.acproot.net
When I check in the DB, it shows that the session is actually connected to instance 1 despite the preferred instance set as Instance3 (JDSCFS3) for the service PKDS_UAT_01
SQL> select inst_id, sid from gv$session where username='SCOTT';
INST_ID SID
1 3839
Why is this happening ?
1. check that all services are running on all nodes. Actually, you service should run only on preffered node
srvctl status service -d db_name
2. restart services
3. try again
Regards
Ed
Similar Messages
-
Why isnt my itouch not connecting to the wifi? everytime I try to connect to a network and i put in the password it says "unable to connect to this network" why isnt working?! the password is correct and everything. I just dont understand why its not working. Someone please help me! thanks
Did it ever work with this WiFi system?
Do other devices work with this WiFi system? -
Why is face time not connecting for the last two days
Why is Face Time not connecting for the last two days
Judging by all the posts on the forum, there seems to be an issue at Apple's end, although they have made no announcement on their status page. Some users have reported that Apple is aware of the issue. You can leave feedback for Apple at the link below.
http://www.apple.com/feedback/ -
Why does ichat video not connect? The error message says we did not respond.
Why does ichat video not connect? The error message says we did not respond.
Hi,
iChat uses several port as they are called over the internet to do different things
Text Chats and Video Chats are on different Ports.
You probably don't have the port open.
Use UPnP in your router if it has it.
8:59 PM Sunday; August 12, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Why does my computer not connect to the internet but other devices do
I have a mac book pro, and it has not been connecting to the internet lately. I also have an iPhone as well as other devices that do connect to the internet. Why is this? Is there anything I can do to reset the internet settings on my computer, or some other solution to fix this? I am guessing th problm is not my internet, because the other devices connect.
1. Turn router off for 30 seconds and on again, this will refresh the IP address of the router? You may not have access to router.
2. Reset network settings: Settings>General>Reset>Reset Network Settings
3. Try adding your SSID and Password manually
Settings>Wi-Fi>Other...>Other Network -
Why will my PC not connect to the Wireless network?
I recently upgraded to the airport extreme and my PC which has a wireless card will detect the network but when i click "connect" i get an error stating "windows is unable to connect to the selected network. the network may no longer be in range. please refresh the list of available networks, and try to connect again." I have not changed any settings and it worked with my old Linksys wireless and on my Apple laptop it worked as soon as i put the password in. Someone has a secure network that will prompt me for the password so i know it is not my PC or the airport, seems they will not talk to each other.
please if u have had this problem give me step by step help, i have read many topics and have not been able to get it to work at all.
thanksTry resetting you network settings on your iPad. Go to Settings, General, Reset, Reset Network settings and see if that clears it.
-
My iphone 4 doesn not connect with charger and mac book. however it does charges when it is powered off and connected with charger. Any clue ?
I hope you are having a great and sorry to learn that you are having this issue;
Since I could not check what version of the laterst firmware, I hope you don't mind doing the following in your printer:
Updating the All-in-OneFollow these steps to enable automated Web Services updates, and to update the product firmware.
Important : The HP product must connect to a wireless network with an active Internet connection to receive updates. However, the product does not need to be connected to a computer.
On the upper left side of the HP product control panel, touch the Web Services icon ( ). The product control panel displays the Web Services screen.
Touch Settings . The product control panel displays the Settings menu.
Touch Product Updates .
Touch Check for Product Updates Now .
Wait for any updates to download and run.
If you using Win XP or later please run this tool to see if you get any errrors Click here
Is your printer on warranty? if you do not know you can use this tool; GO HERE.
Hope this helps and let me know if I can assist you any further I will do my best to provide you assistance;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance! -
Why is my icloud not connecting to the server?
I haven't been able to send or receive mail since September 5, 2012. It's saying that it can't connect to the server. What is the problem, and how can I fix this issue?
Apple seems to be having issues. Just wait it out and come back in a bit. If the issue is indeed on their end, nothing you can do with your device can fix it.
-
HT204347 why does face time not connect with the person I'm calling?
I am trying to call my son's iphone using face time. He can see me dialing in, but the call won't connect. Any suggestions? Thanks.
Can he call you?
-
Every device (iphone4, iphone4s, ipad2) I try to hook up to iTunes gives me a message "this device cannot connect because the apple mobile device service is not setup" does anyone have ideas as to why it keeps popping up? It just started doing this.
I'd start with the following document with that one:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows -
why i see this massegae? (iTunes could not connect to the iTunes store. You do not have enough access privileges for this operation. Make sure your connection is active and try again.)
Hey there Hannuj,
It sounds like you are unable to access the iTunes Store in the iTunes application. Based on the error message I would try the steps in the article here named:
iTunes for Windows: iTunes Store connection troubleshooting
http://support.apple.com/kb/HT1527
Remove pop-up blockers
Some pop-up or ad-blocking programs may interfere with the ability of iTunes to connect to the iTunes Store. Removing them in many cases will resolve the issue.
Flush DNS Setting in Windows
In some cases, the DNS information you computer uses to connect to the Internet needs to be reset. Follow these instructions to flush your Windows DNS information:
Windows XP
On the Start menu, click Run.
In the Open field type cmd and click OK.
In the resulting window, type ipconfig /flushdns and press Return on the keyboard.
You should see a message that the DNS Resolver Cache has been successfully flushed.
Windows Vista and Windows 7
On the Start menu, point to All Programs > Accessories and then right-click Command Prompt and chooseRun as Administrator from the shortcut menu. If Windows needs your permission to continue, clickContinue.
In the resulting window, type ipconfig /flushdns and press Return on the keyboard.
You should see a message that the DNS Resolver Cache has been successfully flushed.
Note: If, in the command prompt, you see this message: "The requested operation requires elevation", close the command prompt and repeat steps 1 and 2 above to be sure that Administrator privileges are used to access to Command Prompt.
See the following articles for additional troubleshooting information on connecting to the iTunes Store:
Can't connect to the iTunes Store.
iTunes for Windows: Network Connectivity Tests
Thank you for using Apple Support Communities.
Regards,
Sterling -
Why this phone back yp assistand do not connect to the server thru my PC
why my new refurbish phone can not connect to the assist back up and download my contacts from verizon wireless
I know how important it is to call all of your contacts onto your replacement phone, ltovar7745. Backup Assistant doesn't require the use of your PC at all, as it's all conveniently available over the air. Please follow the steps at http://vz.to/155Rx1p to restore your contacts to your new device. If you run into trouble, please let us know a fe more details of what's happening and if you're receiving any error messages.
Thank you
JenniferH_VZW
Please follow us on Twitter @vzwsupport -
I have windows vista home premium and all other iTunes worked on my laptop, I downloaded iTunes 10 and now the iTunes will not connect to the Internet. I use Mozilla firefox on my laptop and for some reason it keeps saying the connection timed out and I'm not connected to the Internet when I am. Why isn't iTunes recognizing my web configuration?
It probably has to do with your security and/or browser configuration.
When my laptop crashed last year and I had to get a new one, I dealt with the same thing. First, go to your control panel and select the security section. See if your firewalls are up or not. If they are, turn them off. If you have any software to speed up your browser, that can affect the connection as well. Go into that software and disble/turn it off. If this doesn't work, contact customer support. They have a few other tricks they had me try that worked, but I can't remember them now. -
Why is this query not using the index?
check out this query:-
SELECT CUST_PO_NUMBER, HEADER_ID, ORDER_TYPE, PO_DATE
FROM TABLE1
WHERE STATUS = 'N'
and here's the explain plan:-
1
2 -------------------------------------------------------------------------------------
3 | Id | Operation | Name | Rows | Bytes | Cost (%CPU)|
4 -------------------------------------------------------------------------------------
5 | 0 | SELECT STATEMENT | | 2735K| 140M| 81036 (2)|
6 |* 1 | TABLE ACCESS FULL| TABLE1 | 2735K| 140M| 81036 (2)|
7 -------------------------------------------------------------------------------------
8
9 Predicate Information (identified by operation id):
10 ---------------------------------------------------
11
12 1 - filter("STATUS"='N')
There is already an index on this column, as is shown below:-
INDEX_NAME INDEX_TYPE UNIQUENESS TABLE_NAME COLUMN_NAME COLUMN_POSITION
1 TABLE1_IDX2 NORMAL NONUNIQUE TABLE1 STATUS 1
2 TABLE1_IDX NORMAL NONUNIQUE TABLE1 HEADER_ID 1
So why is this query not using the index on the 'STATUS' Column?
I've already tried using optimizer hints and regathering the stats on the table, but the execution plan still remains the same, i.e. it still uses a FTS.
I have tried this command also:-
exec dbms_stats.gather_table_stats('GECS','GEPS_CS_SALES_ORDER_HEADER',method_opt=>'for all indexed columns size auto',cascade=>true,degree=>4);
inspite of this, the query is still using a full table scan.
The table has around 55 Lakh records, across 60 columns. And because of the FTS, the query is taking a long time to execute. How do i make it use the index?
Please help.
Edited by: user10047779 on Mar 16, 2010 6:55 AMIf the cardinality is really as skewed as that, you may want to look at putting a histogram on the column (sounds like it would be in order, and that you don't have one).
create table skewed_a_lot
as
select
case when mod(level, 1000) = 0 then 'N' else 'Y' end as Flag,
level as col1
from dual connect by level <= 1000000;
create index skewed_a_lot_i01 on skewed_a_lot (flag);
exec dbms_stats.gather_table_stats(user, 'SKEWED_A_LOT', cascade => true, method_opt => 'for all indexed columns size auto');Is an example. -
Why is my itunes trying to update my iphone and its not connected to the computer?
This would be more for the technical side of the house, but why would the system try to update my iPhone and its not connected to the computer? is there a bug in the system?
Update or sync?
As of iOS 5 updates and sync can be done wirelessly, over Wi-Fi.
Maybe you are looking for
-
Is there a way to create a file upload page for uploading large documents to a ftp site in Muse?
I am building a site for a printing company and wanted to know if there was a way to build in a ftp file upload page or button?
-
hi all i am getting this error while running the report in WAD "System error in program SAPLRRS2 and form SELOPT_ASSIGN-01- " what does this error means and what steps i shuld follow? shalini
-
hi i have a unusual requirement Presently in one of my HR reports I am using 'PCH' LDB. In the selection screen we have the object ID which is defined in standard program with no-intervals like this. SELECT-OPTIONS: PCHOBJID FOR OBJEC-OBJID VALUE-REQ
-
Please someone help! Lightbox widget not working...
I was trying to get the Lightbox widget to work on my webpage. I could not get the images to upload in the expandable box like they should. Instead of expanding out like the animated way they should, my Lighbox links kept opening in a new page and ca
-
I had to reset my ipad and 3 movies rented dissapear. how can I get it again if i have not watched yet?