Why isn't Muse accepting my Adobe ID when I go to Publish to Business Catalyst?

When I got to publish to Business Catalyst it asks that I upgrade my Adobe ID and is asking for my password, but it isn't accepting it. Attached is the following error message.

Hi
This will be fixed by the business catalyst support team, so please use the guideline below to reach out to the support
Business Catalyst Support guidelines

Similar Messages

  • When is adobe muse going to be able to use the ecommerce features in business catalyst?

    when is adobe muse going to be able to use the ecommerce features in business catalyst? I need to figure this out asap. my client is using one of your templates in business catalyst but we are designing the new site in muse. How do I transfer over there current ecommerce products over to my muse design?

    Attitude? No attitude. Just facts.
    As to:
    why is there a full version of Photoshop available on NON mac products now if that is the case?
    That would be because ADOBE wrote and released a version of it for those devices.
    Complain to Adobe and tell them you want iOS versions of the apps. Apple has nothing to do with it.

  • Why isn't my iPad2 charging its battery when connected with my iMac?

    Why isn't my iPad2 charging its battery when connected with my iMac?

    A lot of computers, especially older ones (I don't know how old yours is), don't provide enough power through their USB ports in order to charge the iPad - it may still be charging, but at a low rate (it may charge quicker if the iPad's screen is off). If you want to charge it at a reasonable rate then the wall charger is better.

  • Muse Error message when attempting to sign in / publish to Business Catalyst

    This morning I am experiencing problems when trying to publish sites to BC through Muse.
    Anyone else?

    Hi Sanjit,
    Thankyou for the quick response.
    It happens on all sites, old new alike. I have just attempted to create a new site and publish but the same error occurs.
    When I click 'publish to Business Catalyst' or Publish in the top bar it doesn't get past the first dialog box, see below:
    It hangs here for a minute or so. The Muse closes displaying the following:
    Yesterday was fine, all sites published correctly with no errors. This issue started early this morning.
    Penny

  • How do you include other files with Muse publish to business catalyst test site

    Hi there
    I am trying to publish a site created in muse to the business catalyst test website service for a client to review
    in the website i created an animation that i have inserted as an HTML snippet (ie copied relevant code into "INSERT HTML"
    The question is how do include the folder with all the files required to run the animation when i click "PUBLISH" to business catalyst?
    thanks

    --deleted--
    Sorry, figured it out.

  • Why does my Muse Website design look broken when I upload it to FTP, but it looks fine in In-Browser Preview?

    My index page and services page specifically for the English version of my website looks broken and I can't figure out why.
    I created this using Adobe Muse. I'm not the best in navigating the back-end/coding part of the website but I'm afraid it may be something in the code that is causing these two pages to break. The weird thing is they look fine when you go to the Spanish version of the pages.
    Index, English: AIT: Translations to Increase Sales, Brand Recognition and Global Reach
    Services, English: AIT ofrece servicios de traducción para documentos y páginas comerciales en internet y reproducción multilingüe de archi…
    Thank you for your help.

    Hi,
    Are you still facing this issue ?  Your site seems to be working fine at my end both in spanish version as well as the english version.
    I would request you to try using a different browser .
    Also, if you are still facing the issue,it would be great if you could share some screenshots.
    Regards,
    Rohit Nair

  • Can't publish to Business Catalyst - Adobe Muse - Help!

    I'm getting this message when I try to publish my Muse site to Business Catalyst. It was just working, and this dialogue won't accept my password. (Then I logged out, changed my password, and still won't accept the new password.)

    Hi,
    Most of the MUSE users face this issue when they change their primary id of BUSINESS CATALYST or Adobe ID.
    Go to Adobe Business Catalyst site and click on "Get Started for free", click on "Sign In", if Signed in successfully, try to publish from MUSE again
    If problem remains same , you need to contact BC Help & support , Go to Live Chat option and let them know your problem.
    Hope this will resolve your issue.
    Thanks
    Prabhakar Kumar  

  • Why isn't my Face Time screen expanding when I press the arrow buttons? I am getting a very narrow view. I want the entire screen.

    Why isn't my Face Time view expanding to show the entire screen when I press the arrows on the corners of the screen? I'm only getting a narrow view.

    If you've tried holding down both buttons together for 30-60 seconds and still nothing, you need to make an appointment at your nearest Genius Bar to have it evaluated. They will give you your options at that time.

  • Muse will no longer publish to business catalyst if jpegs are included in file

    Hi there,
    I'm in a pickle and hope someone has a solutuion to my bizzare problem.
    Since the last Muse update I am unable to publish to my unlaunched business catalyst site.
    The error message always comes up at overall publish progress 61% complete and is:
    'Error uploading file '...'.jpeg. There was no response from the server. Check your network connection and try again. If this problem persists try again later.'
    My network connection is working well.
    I have narrowed down the problem to image files. If I remove all the jpegs in my Muse file it publishes without a problem.
    Has anybody experienced this issue???
    Thank you for your help!!

    Zak,
    I reported this issue on the 8th of April. http://forums.adobe.com/thread/1445684?tstart=0
    On the 16th, I was able to publish to my test blog site while responding to your reply. This appeared to have been a case of leaving the dialog box up for a period of time wherein it seemed to automatically try again and succeeded. I did not find a "solution" to the problem, I was just "lucky" in that 1 out of roughly 50 attempts to publish, and after leaving the dialog up without clicking anything, the site did in fact publish.
    I recommended continuing to look into the issue but haven't received a response since. Others are now experiencing the same or similar issues relating to images being in the site files.
    I confirmed in my thread that this issue isn't isolated to one particular filetype or file size. For me it always appears to be the very first image file Muse tries to upload, some 60+% of the way through - and this seems to be whatever is set to be the background fill. I wonder if anyone else is using an image as a background fill as well? If no image is used as a background fill and they choose a colour, which file does it hang on? Is the image attached to anything (ie a setting, a fill, a slideshow etc.)? Or is it simply a placed image?
    For me, this has ONLY been occuring since the latest Muse update (April 2nd) and I believe it to be an issue between Muse's attempts to upload and the BC servers. Perhaps it's a timeout issue pertaining to uploading image files?
    My issue began when trying to use an abnormally large file as a background fill (although this was still well under the 25mb you've referred to), however I reduced this down to a fairly small tiled image and the issue remained. The issue repeated itself when I began cycling through file types.
    I can confirm that the bug I'm encountering is NOT where Muse hangs on the attempt to upload the first file. Nor am I using XP or Vista anyway.
    I can confirm the publish DOES stop on the same file (in my case), however there are no .swf or .oam files attached to my particular site and the only image files I'm using are either .png (my preferred type) or .jpg - Some of those images have been "optimised" for web in Photoshop. Incidentally, as you've mentioned it, some of my image files use several "-" characters in the filename, but this is not exactly a "special" character and thus I wouldn't think this would be an issue during the upload process.
    I can confirm that by clicking "Resume" NO further progress is made. However, as I said above, I left the dialog up for a while and the publish completed on its' own (as if by magic) and I've had no problems publishing to that site since.
    Having been forced to delay my latest paid project for over a week now, I cannot delay it any longer and will be beginning work on a new site this coming week and will attempt to publish SOMETHING to a temporary address just to test and see if this issue continues with each new site I create. However, I request this issue becomes a priority for both the Muse and BC teams as it is preventing people (not just myself) from publishing sites - and even committing to projects - and thus potentially losing us all income.
    I would prefer not to have to wait for a patch/fix for this while working on this new project as I will appear unprofessional not being able to give dates for project milestones.
    Having an issue like this reflects VERY poorly on us, the small agencies or individuals, of whom many have bought into not only the Creative Cloud for Muse, but BC as Premium Partners, meaning we RELY on your services to be able to provide our own. We look bad (and extremely unprofessional) when this stuff happens and personally, having known about this issue for nearly 2 weeks now and having still not seen a solution (besides my ONE lucky publish) I'm growing frustrated and anxious regarding my latest paid project.
    I appreciate that you're working on a multitude of problems and are looking into this but I respectfully request this becomes top priority as it's hardly worth it for us if your software/services can't achieve the very goals they set out to do (publish websites) while we sit here twiddling our thumbs not knowing what to do.
    I do love Muse and think it's a great tool and will continue to be once further improvements are made (BC is a different story...) but I'm getting increasingly exasperated waiting for this issue to be resolved. I hope you and/or the rest of the team can find a resolution to this problem swiftly (as a priority) and can keep us all in the loop regarding progress on this.
    I look forward to a response soon with useful news.
    Thanks.

  • Is it still the case that the Muse CC Forms widget will not work properly unless you have Business Catalyst?

    I am looking into options for our next office website redesign.  We will definitely need a forms function.  I downloaded the Muse CC free trial and went through all of the tutorials.  The video on the forms (Contact Form) stated that the forms widget would not work or would not work properly if you do not have Business Catalyst.  I'm hoping that has changed since the video was created.
    Is this still true that you need to purchase the Business Catalyst product for Muse CC form widgets to work correcty??? 

    Piruki have you tried utilizing the Previous version option within the Creative Cloud Desktop application?  You can find additional details under the install Previous version section of CC desktop lists applications as "Up to Date" when not installed - http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html.

  • Can't find a place on Adobe site that explains how to begin using Business Catalyst

    I have several sites I have created with Dreamweaver, and I have 5 free sites on BC, according to the "deal"....but I am not seeing how to find BC and register each site, FTP to them, etc...Can someone point me in the right direction?
    Thanks,
    Dan

    Creating & Editing BC sites in DW (video)
    http://tv.adobe.com/watch/learn-business-catalyst/creating-and-editing-your-business-catal yst-website-using-dreamweaver-cs6/
    Nancy O.

  • Why wont my firewall accept installing adobe reader

    Hello folks,
    I have got a strange error reporting during installation of adobe reader.
    My firewall dont accept the installation and i get a weird list of errors
    is this problem known to this community?
    I need reader to convert the pdf documents from my site:
    http://www.4-daagse-nijmegen.nl
    who can help

    Use the offline installer: http://get.adobe.com/reader/enterprise/
    To run Adobe Reader your firewall must allow access to cloud.acrobat.com

  • I'm having trouble activating CS6 Design Premium with a VALID product Code and a VALID previous version code, CS 5.5 Design Premium. Why isn't it accepted?

    I purchased CS6 Design Premium directly from Adobe, upgrading from CS5.5 Design Premium. Now it won't acknowledge my valid previous version serial number. And I have the original documentation.
    What should I do? I can use the trial version, but that is not the solution I need.

    First you should check your Adobe account online to confirm that you are using the same serial number associated with your older version.
    If things still lok okay then you will need to get in touch with Adobe support thru chat and see if you can get their help in resolving the matter.  They might not be available during the weekend.
    For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • Why isn't Photoshop accepting my serial number?

    I had Photoshop CS4 installed on my laptop for two years without any major issues. The laptop recently broke so I got a new one and I cannot install Photoshop there because it says my serial number is invalid. How can this be? It worked fine before and the number is clearly printed on the DVD case.

    Since this is a serial number issue you can't post serials in public forums, I would do one-on-one chat support for activation:
    http://adobe.ly/DI_Install_Activation_Chat
    Where did you purchase your copy of Photoshop? My one concern is that the serial #/product was counterfeit:
    Protect Yourself From Pirated and Counterfeit Software: http://adobe.ly/qASJDH
    If you determine that's the case, let me know and send me an email/private message. jtranber at adobe dot com

  • Why isn't Firefox accepting my graphics driver version?

    I am trying to get Firefox 11 to turn on hardware acceleration, but it's complaining that my up-to-date driver is blocked. "about:support" says "Blocked for your graphics driver version. Try updating your graphics driver to version 257.21 or newer."
    I'm running XP SP3 fully updated and a GeForce 7300 LE with the latest driver version 296.10.

    If you go into about:support, can you copy the exact text that appears in the graphics section? (or take a screenshot).

Maybe you are looking for

  • How to set up my MAC to print on XP wireless Router

    Is there a site out here where I can get detailed instructions (in proper sequence) to get my wife's brand new laptop to print on shared network We have an XP laptop and desktop. Desktop is hooked up to a hp2175 printer. I had no problems using the w

  • Adding a new field to field catalogue

    Hi experts, My client has got a requirement where he want to use departure region for calculating of taxes. This field was not availble in field catalog but avalaible in KOMK, I have extended the same to field catalog. Now I have created the condiati

  • Regarding creation of node element

    Hi i hav a doubt regarding creation of node element. u can create new node element using method create(cn)Element available either directly from wdContext or from wdContext.node(cn) where cn is any context node. can any one plz explain me what's the

  • Select and update in same instruction

    Can i select and update a column in table by one query only I donot want to execute two queries one for updation and one for retrieval e.g. instead of UPDATE t1 set val=val+1 and then SELECT val from t1; i wanna have a single query (compliant to mysq

  • Best application for enlarging images

    I'm in the process of compiling a slide-show presentation for display at my parents wedding anniversary. The show itself will be a mixture of still images plus short video clips much in this style http://www.studioimpressionsphotography.com/blog/2009