Why routing failures create two messages in BizTalk admin

hi,
can some one help me to understand why routing failures create two messages in BizTalk admin, one with suspended(resumable) and one with suspended(non resumable)?
Regards, Amit More

One of the non-resumable Message contains the message context properties which is passe when message is passed for the first time . It varies for with each message retry .
While the second message contains your actual data i.e incoming message or the message which has failed to route to the destination system .You can resume it when ever the down stream system is available .
Below links can guide you
Scenarios Leading to Suspended (Non-Resumable) Messages
Types of Message Failures
Thanks
Abhishek

Similar Messages

  • Why does it create two copies in the sent folder?

    Whenever I send an email, it creates two copies in the sent folder. I use outlook / hotmail / live.

    https://support.mozilla.org/en-US/questions/1056919

  • Create null message using BizTalk mapper XSLT

    Hi,
    I have a requirement to check if a message contains a certian value, and if so, throw away the message.  Does anyone know how this could be done using BizTalk mapper/ XSLT?  It's an ESB messaging only solution so don;t want to introduce orchestratons
    / c# code.
    In short is field A = 'yes' the message will be thrown away / made null. 
    Thanks in advance.
    GilesB

    If you consider doing this in Receive-side with some pipeline component, I am afraid you can't eat the data at the receive pipeline. For a null returned, I believe at least a empty message would be published to message box.
    Without orchestration, in message-only scenario one option you can consider is using a custom adapter where you can have your logic whether to send a stream/message out or not. Something like:
    public bool TransmitMessage(IBaseMessage msg)
    _terminate.Enter();
    try
    bool logMessages = Convert.ToBoolean(
    GetAdapterConfigValue(msg.Context, "logMessages")
    if ( logMessages ) {
    SystemMessageContext ctxt = new SystemMessageContext(msg.Context);
    //Add your logic using XPathReader - stream based XPath
    //and check whether the message has the value your're looking for
    bool isFound = false;
    if (!isFound)
    string msgData = "";
    StreamReader reader = new StreamReader(msg.BodyPart.Data);
    using (reader)
    msgData = reader.ReadToEnd();
    // discard the message
    return true;
    } finally {
    _terminate.Leave();
    Above is part of the send adapter code where you add your logic using XPathReader - stream based XPath and check whether the message has the value your're looking for. You can use
    null send adapter as refernce and build your logic where it would check for the required value in your custom adapter.
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • Why does mail create two folders for incoming mail?

    Hi there,
    i'm using the latest version of mac and i've set up a gmail (imap) account on mail. When i first created the imap account, all seemed in order, then after about 5 minutes of activity (i believe it was the moment i started composing my own email), Mail created a series of new folders under the standard "inbox, sent and junk" folders. There is now also a GMAIL tab there which has a bunch of subcategories like sent mail and junk and trash. when i receive new emails, they show up in both the default inbox and also in the gmail inbox. I'd rather just receive them in the default inbox because it looks like i am receiving double the mail and have to click both folders in order to mark the new mail as unread. any advice? hope i was able to bring my subject over clearly enough.
    thanks,
    jp

    Welcome to Apple Discussions, janchy.
    What you describe sounds like normal behavior to me. IMAP accounts create their own section in Mail's sidebar as well as sub-mailboxes in the standard mailboxes. If you see Sent/Trash/Junk as subfolders in the (white) Gmail folder, select each one in turn and click Mailbox menu > "Use this mailbox for...".
    You should read my [User Tip about IMAP Gmail and Mail|http://discussions.apple.com/thread.jspa?threadID=1747527] (click the link), too.
    At the moment it's also accessible at the top of any of the "Mail and Address Book" forum pages on this board.
    floba
    (MN565)

  • SOLMAN EHP1 - anyone can create support message in Satellite System's Help?

    Hi,
    I just curios that why everyone can create support message in satellite system-> help -> create support message?
    I tested with restricted profile user and without role SAP_SUPPDESK_CREATE, NO BP created but he still manage to create support message???? Any idea??
    Also, same goes to any user can process ticket in SOLMAN with no BP-Employee role and SAP_SUPPDESK_* roles assigned.
    Your kind input is very much appreciated.
    Thanks,
    Nicholas Chang

    Hi Nicholas
    If you are using a "Named" user instead of the Trusted Relationship in the RFC maintained in BCOS_CUST for entry OSS_MSG then this is quite possible. In this case the "Named" user will be used to call the interface to create message and the calling user ie the end user creating the ticket will only be used as "Reporter" of the message.
    The user entered in the RFC details probably has the authorization to create Support desk messages.
    Regards
    Amit

  • HELP!EXPORTING FROM KEYNOTE TO QUICKTIME AND IT CREATES TWO DIFFERENT FILES

    I made a presentation in keynote, adding music from my itunes library and need to send it to a client (who owns a PC) ASAP.
    When I export my keynote file to QT, it creates two separate files on my computer. One is the project and one is the "soundtrack.mov"
    1. Why does it create two separate files?
    2. How can I send the ENTIRE presentation in one?
    3. How can I send it to a PC user?
    4. Why did it tell me on my last music selection that I added to keynote (After I exported) that I would have to open it in itunes???
    Totally NEED HELP ASAP!
    Thank you
    ML

    Yeah, me too. Bump. Can anybody explain this behavior?!?

  • Showing two messages being sent.

    I sent an email to 1 person. Mail showed two messages sending out. When I checked my sent box it only showed one sent. Does anybody know why it would show two messages going outbound?

    One reason might be in Mail's Preferences.  Look there (under Mail in the Menu bar), and choose the "Composing" tab.  Have you checked the box under "Composing" that says "Authormatically cc myself"?
    If not, look in your sent folder to try to locate the two messages.  There might be a twirly arrow that you may have to twirl next to "Sent" to show all your various account "sent" boxes.

  • PI Message Mapping One Source to create two of the same Target Nodes.

    Hi,
    I have a source node that contacts the following.
    "1234-5678".
    When there is a "-" in the source node then I need to create two target nodes.
    When there is no "-" in the source node then only create one node.
    Since the source structure is a flat structure by on the target side as you can see I am trying to achieve a diep structure.
    Please can you assist in how to do this with PI message mapping.
    Regards
    Willie Hugo

    Hi,
    "1234-5678" only occurs once in the source. There is no source xml node that will occur more that once. The whole structure only occurs once. But on the target side I need one of the node to occur more than once if a hyphen is found in the source field.
    Source Message                      - Always only one data node.
    ==============
    <root>
    <OnceOnlyNode>1234-5678</OnceOnlyNode>                   [1..1]
    </root>
    Target Message                      - Only two text node when "-" in source, else only one text node.
    =============
    <msg>
    <text>1234</text>
    <text>6789</text>
    </msg>
    How can this be done using standard PI message mapping functions. Can it be done?
    Regards
    Willie Hugo

  • Why weneed to call two BAPIs to create a notification in SAP

    HI Experts,
               There are two BAPIS namely BAPI_ALM_NOTIF_CREATE and BAPI_ALM_NOTIF_SAVE for creating a notification.
    We have to call the first one with proper data and it returns a dummy number which we need to send to the second bapi to save it.
    Why SAP has provided two BAPIS? is there any strong reason for this.
    Good answers will be rewarded.
    Thanks,
    Prasanna

    Hello Roli,
    If your requirement is to launch Transaction IW52 after clicking apply button then you can use Transaction Launcher tool in CRM to integrate to CRM WebClient UI.
    Calling Transaction Launcher on user action
    BOR object or ITS based Transaction Launcher
    Regards,
    Ashik

  • Why do senders receive a delivery failure notice although messages are being received?

    Why do senders receive a delivery failure notice although messages are being received?

    What you have there is either a jailbroken unit with some crazy custom UI or an eastern knockoff. Give us some photos of the ipad itself, mainly the back and some experts can help.
    If you plug it into iTunes does iTunes even acknowledge that an ipad is connected? If it does then try a restore.
    Failing that, head down to an apple store and see what they can do for you.

  • Why sometimes we have to use two message( ) to display one message ?

    Sometimes one message( ) function is not working properly ? We have to use two message( ) to display one message ? Why ?

    And just to add a little on what dave said:
    You can also detect which button the user has clicked and do some action accordingly.
    DECLARE
    al_id ALERT;
    al_result NUMBER;
    BEGIN
      al_id := Find_Alert('MESSAGE');
      SET_ALERT_PROPERTY(al_id, ALERT_MESSAGE_TEXT, 'your message here');
      al_result := Show_Alert(al_id);
      IF al_result = ALERT_BUTTON1 THEN
         ...  --do some action.
      END IF;
    END;

  • Why do I get this message every time I travel with my laptop and then return home: To improve reliability, Time Machine must create a new backup for you.

    Why do I get this message every time I travel with my laptop and then return home: "To improve reliability, Time Machine must create a new backup for you."
    I get this on my new MacBook Air, but never got it on my old MacBook Pro.
    Thanks!

    See #C13 in Time Machine - Troubleshooting.

  • After formatting and creating two partitions on my external HD, why is Time Machine taking 25x longer to perform a backup?

    Hi.
    I bought a macbookpro 13"retina, new two weeks ago and a G-tech 1TB external drive from the apple store. It's my first mac.
    I performed a backup, using Time Machine, which copied 18 GB onto he 1TB external HD in around 20 minutes.
    After a little more reading, I realised I should use Disk utility to partition the 1TB external G-tech drive into a 250gb partition, and a 750gb partition.
    [My MBP has a 250gb flash HD. I'll use the other 750gb for storage of my other files, like photos, music etc.]
    So, using disk utility I formatted the 1TB exernal drive, then created two partitions.
    However, I've started backing up my data using time machine again, onto the 250gb partition, on the external drive, and its now taking 5 hours to copy the 19.81GB
    So why is it taking 25x longer than the first time I did it? [First time it took 20 minutes]
    Thanks

    Since performing the fist backup, a couple of days ago, which took twenty minutes, and the second backup, which is taking 5 hours, I installed MS office for Mac 2011 and Silverlight.
    Dont know if thats responsible?

  • Why do I get the message You are not allowed to create or update this content

    Why do I get the message You are not allowed to create or update this content/

    Well, maybe we also need a "smart" answer. You've provided zero information from which you expect us to provide an answer? Maybe had too much weed today, Bob?

  • Why am I getting two different conversations when the same person txts me and sends me an I message? I thought they should be in the same conversation?

    Why am I getting two different conversations when the same person txts me and sends me an I message? I thought they should be in the same conversation?

    I'm experiencing something similar. My conversations are kept together but if the screen is opened to a conversation and I receive a text from that person it doesn't show up on the screen. The message alert in the upper corner indicates a new text but I have to back out of the screen and go back in to read it.

Maybe you are looking for