Why spark videodisplay control does not work when i run the application?

Even in the mode design I can not see the video, thks.....

@Jorge,
Try using file:/// instead of file:/.
This seems to work for me:
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
        xmlns:s="library://ns.adobe.com/flex/spark"
        xmlns:mx="library://ns.adobe.com/flex/mx">
    <s:VideoDisplay x="159" y="96"
            source="file:///C:/Documents and Settings/pdehaan/My Documents/My Videos/walking.flv"
            loop="true"
            width="384" height="267"/>
</s:Application>
But I'd probably recommend copying the .FLV file into your Builder project or putting it online instead of trying to play it back from a hardcoded file:/// path.
Peter

Similar Messages

  • The Horizontal & vertical scroll is not visible or not working when i run the form in Forms 6i.

    Hi all,
    The Horizontal & vertical scroll is not visible or not working when i run the form.
    In this form , there are 5 canvas namely
    CANVAS2 - Stacked Canvas
    PASS - Content Canvas
    MAT_RATES - Content Canvas
    DATE - Content Canvas
    PREVIOUS - Content Canvas
    I have set "Show Horizontal Scroll Bar" to "Yes" and  "Show Vertical Scroll Bar" to "Yes" in the WINDOW Property.
    I have  set "Show Horizontal Scroll Bar" to "Yes" and  "Show Vertical Scroll Bar" to "Yes" in the STACKED CANVAS Property .
    But still the Horizontal and Vertical Scroll Bar is not working when i run the Form.
    Help me with this please. How do i make it visible??
    Oracle Forms 6i..
    Thank You.

    Vijetha wrote:
    Hi all,
    The Horizontal & vertical scroll is not visible or not working when i run the form.
    I have set "Show Horizontal Scroll Bar" to "Yes" and  "Show Vertical Scroll Bar" to "Yes" in the WINDOW Property.
    I have  set "Show Horizontal Scroll Bar" to "Yes" and  "Show Vertical Scroll Bar" to "Yes" in the STACKED CANVAS Property .
    But still the Horizontal and Vertical Scroll Bar is not working when i run the Form.
    Help me with this please. How do i make it visible??
    Oracle Forms 6i..
    Thank You.
    hello vijetha,
    window and canvas show scroll bar when it need.
    You should show block property
    and set block scroll bar
    hope this helps..
    Hamid

  • Flash catalyst cs5.5 not working when i run the project

    when i ran prodjects in flash catalyst cs5 it came up as a webpage that could scroll, now in cs5.5 when i run the prodject it cannot scroll and it doesn't scroll when you export for web servers, help much apreciated.

    Vijetha wrote:
    Hi all,
    The Horizontal & vertical scroll is not visible or not working when i run the form.
    I have set "Show Horizontal Scroll Bar" to "Yes" and  "Show Vertical Scroll Bar" to "Yes" in the WINDOW Property.
    I have  set "Show Horizontal Scroll Bar" to "Yes" and  "Show Vertical Scroll Bar" to "Yes" in the STACKED CANVAS Property .
    But still the Horizontal and Vertical Scroll Bar is not working when i run the Form.
    Help me with this please. How do i make it visible??
    Oracle Forms 6i..
    Thank You.
    hello vijetha,
    window and canvas show scroll bar when it need.
    You should show block property
    and set block scroll bar
    hope this helps..
    Hamid

  • My App Store does not work when trying to update applications

    My Apo store does not work when I try to update applications that need to be updated

    There are a number of other threads from people reporting a problem with a blank Updates tab in the App Store app - it looks like there is a problem at Apple's end which they need to fix.
    Some posts are suggesting that you if you go into the Purchased tab in the App Store app you might be able to update the apps from there, though you will need to scroll through the list to find those with updates and individually update them.

  • The remote does not work, when i turn the tv on I see the apple tv and the itune icon on the screen

    the remote on apple tv does not work,when i turn on the tv Isee the appletv and the itune icon on the screen.

    Did you do a software update?
    AppleTV is unable to start properly.  You need to connect to a computer running iTunes as detailed here:
    Apple TV (2nd and 3rd generation): Restoring your Apple TV

  • Internal isight does not work in any of the applications

    I rarely use my built in camera, however I recently noticed that my built in camera iSight (macbook) is not functioning with any of the applications (ichat, photobooth, skype). Dont know how to trouble shoot. Any advise please?

    Deepak Goyal wrote:
    Under Utilities folder in Apps folder, I am not able to find USB or iSight or Camera folder.
    ... Is it wrong installation ..., which could result in this way?
    (1) No. What you see is normal for Mac OS X.
      Neither "USB" nor "iSight or Camera folder" should be in your "Utilities folder in Apps folder."
    (2) Your Utilities folder does contain a " System Profiler " iCon. Double click it.
    Your System Profiler utility will open. 
    Click "USB" in the column of items under "Hardware" in the "Contents" column at the left side of the System Profiler window.
    "USB Device Tree" pane will open immediately to the right of the "Contents" column.
    Click on each of the USB items in the "USB Device Tree" as necessary until you find your "Built-in iSight."
    If your iSight does not show under any of the USB items, your built-in iSight is not recognized by your Mac, and your Mac needs service.
    I sometimes write too much. If you have difficulty understanding my wordy instructions,
    see the image below. Yours System Profiler window may look somewhat different,
    but the idea is shown in this image from one of my Macs:
    I am a window user and I tried to look for peripherals through all the possible options similar to windows, but ...
    Mac 101 and Switch 101 can offer new Mac users considerable help:
      http://www.apple.com/support/mac101/
          - and -
      http://www.apple.com/support/switch101/
    Again thanks to all those, who are trying to help me.
    You're most welcome. We are happy to try to help.
    Message was edited by: EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.4)  MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.4)
    LED Cinema Display  G4 PowerBook  1.67GHz (10.4.11)  iBookSE 366MHz (10.3.9)  External iSight

  • N97 camera does not work when i open the len cover

    I think the camera softeware has bug. Tthe camera software shows up when all the menu, and when i click i can see the zoom in/out slider but nothing there is no image showing up on the screen. The screen is dark and it looks like the camera sensor does not receive any image from outside. This can be fixed by restarting the phone but it's very annoying. I had to reset like 10 times a day. If i leave the software on it's fine but if i turn off the software (close the lens cover) and turn back on the bug occurs. Anyone has the same issue like me? Do i need to update the firmware? Im on the original firmware.

    it does not happen all the time to me, but sometimes if I open and close it to often, it would happen.
    but I don't need to reset the phone, just close and open the len cover again, and it works. 
    Message Edited by walkmancat on 05-Jul-2009 05:52 PM

  • Why my Startup Manager does not appear when I hold the Option key when starting to boot.

    I no longer have the Startup Manager appearing when I hold the Option key when starting to boot.
    Instead, the system just boots into whichever OS was last selected in the Startup Disk Preference.
    How to get back my Startup Manager so that I can boot up from my external hard disk.
    Thank you.

    Can you please run the following in terminal and post the output in your reply:
    diskutil list; echo; nvram -p | grep boot-args; echo

  • Fault policy does not work when throwing remoteFault in bpel

    Hi
    I have a BPEL-proces in which I throw a remoteFault.
    In the fault-policy there is a condition for this fault
    <faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
    name="bpelx:remoteFault">
    <condition>
    <action ref="ora-java"/>
    </condition>
    </faultName>
    But the fault-policy does not work if I throw this remoteFault in de bpel. But when I invoke another service (which is shutdown), then I get a remoteFault and for this remoteFault the fault-policy works well.
    Any idea why the fault-policy does not work when I throw the remoteFault?
    Regards

    BPEL fault works only on invocation failures.
    Fault management will work based on the remote fault from the remote service, you cannot throw remote fault from bpel and capture that in fault management and process.
    The following are the actions that we can take on faults.
    1. Human Intervention
    2. Rethrow [rethrowFault]
    3. Termination [abort]
    4. Replay Fault [replayScope]
    5. Custom Java Action [javaAction]
    6. Retry [retry]
    Hope this helps !!!
    Thanks,
    Vijay

  • Css3 animation does not work when triggerd by backing bean method

    Hi,
    I use Jdev 11.1.1.4 (but I guess the Jdev/ADF version does not matter in this case) and Firefox 15.0.1.
    I tested some parts of article https://blogs.oracle.com/groundside/entry/css_animations_the_panel_flip from Duncan Mills.
    The CSS3 animation for styleClass "rotateOut" works fine when I trigger it from mouse hover.
    The problem is that the animation does not work when I set the styleclass in a backing bean.
    In this case the UI component to rotate (in my case the calender component) changes immediatelly to the transition target without the transition-duration of 2 seconds and therefor there is no animation effect visible for the user.
    Here the backing bean code:
        public void doRotate() {
           afCalender.setStyleClass("rotateOut");
           AdfFacesContext.getCurrentInstance().addPartialTarget(getAfCalender());
        }Here the skin:
      .rotateOut {
        -moz-transition-property: -moz-transform;
        -moz-transition-delay: 2s;
        -moz-transform: rotateY(45deg);
        -moz-transition-timing-function: ease-in-out;
        -moz-transition-duration: 2s;
      .rotateReturn {
        -moz-transition-property: -moz-transform;
        -moz-transform: rotateY(0deg);
        -moz-transition-timing-function: ease-in-out;
        -moz-transition-duration: 2s;
      }In Duncan's article java script is used to change the style class.
    Does the CSS3 animation only work when java script is used to change the style class or shoud java in a backing bean also work?
    Any hints?
    regards
    Peter

    I have tested several other settings but no success.
    Any ideas?
    regards
    Peter

  • Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work.

    Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work neither when chosen after pressing the button nor chosen in the apple menu..

    I have had the same problem but on another forum it was suggested that disabling internet sharing would solve this. This fix seems to work on my machine - why it works I do not understand

  • Mission Control does not work!!!!!!!!

    Hi all,
    I have recently Reformatted my mac and made it into 1 partition of 500gb just to run mac os x. I did it with the discs the laptop came with.
    After OSx install was complete, I ran the os x lion downloaded from the app store and installed it too. After completely updating the system with software updates and my other software like ms office, vlc, flash, iLife etc.
    I have found that the mission control does not work sometimes. It allows you to swipe from screen to screen but when when you swipe up.. It hides the top apple bar but nothing else happens.. Everything else is fine so far.
    When I turn my mac on. If it gets stuck the only way to make it work again is to restart. Which is a bit annoying.. Plz tell me if it's a bug or something.
    If that happens to someone else as well?
    Thanks

    Does it work ok if you create a new user?
    To create a user account:
    Choose Apple menu > System Preferences and click Users & Groups. Click the lock icon to unlock it, and type an administrator name and password.
    Click the Add button below the list of accounts, choosing a type of account Standard is fine) from the New Account pop-up menu.

  • My new ipod nano does not  work when you turn off the computer

    I bought a new iPod but I have a problem when you turn off the computer does not work. Shows that the battery is full and it was lightning. Ipod only works while connected to your computer. What should I do

    Hello pepi95,
    And welcome to Apple Discussions!
    If you just bought the nano, why not bring it back for a replacement or your money back? It's definitely a defective iPod. Not much else for options here. Sorry.
    B-rock

  • Keyboard volume control does not work

    I have an iMac G5, running OS 10.5.8, and a new Apple Keyboard with Numeric Keypad. My keyboard volume control does not work. Any have ideas as to why ? (I have a similar set-up at work with no volume problems.)

    Try system prefs/keyboard/keyboard/ and uncheck Use all F1, F2 etc as standard function keys.
    Other wise the volume and brightness controls will only work if you hold down the function key first (fn)

  • 2002 G3 600 mhz iMac display stays dim with an unidentified sign displayed.  The contrast control does not work.

    My display screen is dim and the contrast control does not work.  There is a sign on the screen that I have been unable to identify.  It is a white circle outline with a half moon solid circle within it.  Does anyone know what's wrong?

    There is a sign on the screen that I have been unable to identify.  It is a white circle outline with a half moon solid circle within it
    That would be a screen contrast symbol     
    My display screen is dim and the contrast control does not work.
    Did you reset the PRAM? http://support.apple.com/kb/ht1379 And the pram battery may need to be replaced if it is over 3 years old it is under the iMac under the ram cover and there is a little button in there to reset the pmu as well. you have to have it pluged in when you do a pmu reset. there is a lot more stuff to try before the worst case scenario that is a bad PAV board the Pav is what runs the monitor and if it is going bad That may be a syptom that it is haveing and they can not be fixed (Well not for under $250 and that is useing old parts because they do not make them any more) but that wood be worst case scenario. Lets just hope it just needs to be reset Try that and Keep us posted

Maybe you are looking for

  • PLD: Line items trauncate in repetitive area

    Hi All, I'm having issue with the line items truncate in the repetitive area. Is there a way to fix the number of items in repetitive area? Thanks in advanced. Regards,

  • Where does the buffer data gets stored in bw 3.5 bps?

    Hi all, Is there any standard tables, where in i can look for the buffer data. And how to delete nor refresh the buffer data in bw 3.5 bps? Can anyone let me know the significance of buffer in bps 3.5? Thanks Pooja

  • Why cant I save some pad files as pdf's in CS5

    I have a PSD file I cant "save as" a jpg, I alsi get nothing when I print it and save for web and devices is greyed out...

  • Did iTunes damage my files?

    I've started to discover that some files in my iTunes library are damaged. In some songs you can hear sudden noises, crackling "white noise". I listen mostly to ALAC, so at the moment it's only ALAC files I've found to be damaged, if it also applies

  • Performance of queries fired through the application

    Hi I m using Oracle 10G Standard edition in windows server. As a part to check how much time is taking to insert 50000 records in the table and to check CPU used for the insert, Does Oracle has any tables or tools to do this. Can this be extracted fr