Why the sap will compile the abap program again and again?

Every one tell me that when you open some screen at the first time, the sap will compile the abap program and will not compile again at the next time.But I found actually when I open some screen at the 2th or 3th or more times,the sap will still compile the abap again.Such as open the T-CODE va01,mm01,and so on,the sap will show some message below the screen to show it was compiling the abap program.This make the operation spend me huge time.Is there any one could tell me how to resolve the problem or give me some advice?And I will appreciate him/her very much.Thank you.

Hi..
It has very simple answer ... SAP code resides in database and it doesnt deliver a exe or a dll files (obj) to customer ..Now when program initially is loaded it is compiled and its linked object file is stored in SAP memory and therefore it is not compiled next time...
Regards
Anuj Goyal

Similar Messages

Error to install the SAP NetWeaver Application Server ABAP 7.02 SP6 32-bit Trial Version

Hi,
Can anybody help me?
I'm try to install the SAP NetWeaver Application Server ABAP 7.02 SP6 32-bit Trial Version... and in the Running phase 11: Create sequence for the ABAP user, I had this error:
What do have I to do solve this problem?
ERROR      2014-07-13 14:24:19.395 [iaxxinscbk.cpp:244]
CJS-00030 Assertion failed:    :    [3336] 14:23:42    ***Warning: Loadavg: Could not add processor time performance counter to query.
com.sap.dbtech.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: Cannot connect to jdbc:sapdb://virtuawjms/NSP [Restart required].
ERROR      2014-07-13 14:24:19.395
CJSlibModule::writeError_impl()
MUT-03025 Caught ESAPinstException in Modulecall: :    [3336] 14:23:42 ***Warning: Loadavg: Could not add processor time performance counter to query.
com.sap.dbtech.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: Cannot connect to jdbc:sapdb://virtuawjms/NSP [Restart required].
ERROR      2014-07-13 14:24:19.495 [sixxcstepexecute.cpp:988]
FCO-00011 The step SdbCheckExistingSequence with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Sequence|ind|ind|ind|ind|6|0|SdbCheckExistingSequence was executed with status ERROR ( Last error reported by the step :Assertion failed:    :    [3336] 14:23:42    ***Warning: Loadavg: Could not add processor time performance counter to query.
com.sap.dbtech.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: Cannot connect to jdbc:sapdb://virtuawjms/NSP [Restart required].).
INFO       2014-07-13 14:24:22.669 [synxcpath.cpp:815]
CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Arquivos de programas\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\__instana_tmp.xml.
WARNING    2014-07-13 14:24:24.752 [iaxxejshlp.cpp:150]
Could not get property IDs of the JavaScript object.
ERROR      2014-07-13 14:24:24.752 [iaxxejsctl.cpp:492]
FJS-00010 Could not get value for property .

Hi,
Kindly follow SCN thread Sapinst error: No GUI server connected and try to restart the complete system.
Regards,
Gaurav

How to extend the execution time of an ABAP Program using the Process chain

Hello Sapians,
Our Environment has got 600seconds = 10 mintues as the execution time.
My ABAP Program is taking more than this 600 seconds, to show the result, I found this when I tried to execute in debug mode, it shows the result.
If I execute in background also it shows the results succesfully.
Only issue is when I execute this report in foreground it has been taking ages and goes on Time OUT Error.
It has been decided that we can extend the execution time only for this report, and it will reset the time back to 10mintues once the report has been executed successfully or failed in between for any other reasons.
And we can achieve this by using the process chains.
Can any body help me please in this regard
Thanks,

Hi,,,,,,,,,,
Besides Process Chain There is another way out for this........
Resetting time counter of dialog process so that time-out does not
happen. Use this fm within your program at appropriate locations to
reset time counter.
"CALL FUNCTION 'TH_REDISPATCH'."
Thanks
Saurabh

How to see all the columns in the spool output of an ABAP program

I have an ABAP program which displays all the columns when I run it manually. (by scrolling to the right using right arrows). When I run that report in the scheduler and when I see the output in the spool in transaction SP01, it does allow me to go to the right to see all columns.
thanks
Ram

Check OSS Note 409339 - Spool requests with ABAP lists with more than 255 columns.
Summary
Symptom
As of Release 4.6x, the ABAP list processor can create spool requests for ABAP lists with a width of more
than 255 columns. However, when you print using the SAP spool, only the start of the list lines is printed,
the rest of the line is truncated at the end of the page.
Other terms
ABAP, lists, print parameter, LINE-SIZE
Reason and Prerequisites
Creating "wide" lists on the screen (in other words, lists in the SAPGUI with more than 255 columns) was
already introduced by the ABAP list processor for Release 4.0B. However, before Release 4.6 these lists
cannot be printed out in the width used on screen.
In older releases (for example, 4.0B, 4.5B), you were not able to generate spool requests for lists with a
width of more than 255 columns:
The system issues error message PT 026: "No. of columns > 255, no standard print-out possible".
Therefore, we did not have the problem described here of non-existing device-type support in 4.0/4.5 for
printing out "wide" lists.
Up to and including 4.6C there are no SAP device types that support print formats for lists with a width of
more than 255 characters). Since Release 3.0A, all SAP device types support a maximum list width of 255
characters with device format X_65_255.
Solution
When you create the spool request and a print dialog box appears, enter a column width of maximum 255
in the "Number of columns" field.
As of Release 4.6D, you have the option of using device type SWIN with the new format X_65_1024/4 when
printing with Windows (see Note 213382).

I can't install the SAP NetWeaver 7.0 ABAP Trial Version! HELP!

can anyone help me ,when i install the SAP NetWeaver 7.0 ABAP Trial Version,it always clue on "The installer had to update some MicroSoft runtime libraries. For correct operation, a system reboot is required. Do you want to reboot now?" I have reboot more and more ,but it just the same.

1. create an shortcut of the CD\image\setup.exe to your desktop
2. change the properties of the shurtcut - compatibility - run program in "windows server 2003 sp1" mode and select "run as administrator"
3. now you can doubleclick the shortcut and install the trial

To Find the SAP Query from the tranaction code or the program name

Hi,
I have a situation wherein I have to modify the sap query associated with an transaction code.But the problem is that I am unable to find the SAP Query.
<b>Please let me know how to find the SAP query from the transaction code or the program name.</b>
Thanks and Regards,
Rupesh

Hi Rupesh,
1 use FM
RSAQ_DECODE_REPORT_NAME
2. This is one of the best and easiest way.
3. It will provide u the following info.
   WORKSPACE
   USERGROUP
   QUERY
   CLIENT
4. Thru TCode U must know the program name first.
   This can be discovered using SE93.
Hope it helps.
Regards,
Amit M.

My husband(less technologically inclined than I am), decided to delete programs from our iMac, now it has a grey screen and won't get past it. If I insert the Application Install DVD, to repair the disk, will I loose all my pictures and music?

My husband(less technologically inclined than I am), decided to delete programs from our iMac, he turned it off and now it has a grey screen and won't get past it. It won't start in safe mode and when I If I insert the Application Install DVD, to repair the disk, will I loose all my pictures and music?

With a corrupt disk, the install procedure is most likely going to fail.
How old it the disk?
You might be able to reformat it to fix the problem. Of course that means you lose all of your data.
The other alternative is to get a new disk drive and put that in your Mac and install OS X
Then put the old disk drive in an enclosure and see what can be recovered from it.
Allan

How to find the start condition of a ABAP program?

Hello Gurus!,
Could any one please explain how to find the start condition of a ABAP program?
like its a event based or time based?and also how to find that event and time..
Thanks in Advance...
Dinakar

Hi Dinkar,
Go to Job Schedule, put Job Step parameter as your program and see scheduled Job.
In Schedule Job double click to see start condition. and steps to see details and variant.
Hope it helps.
Thanks
CK

How can we create the error log in a ABAP program

Hi all,
How can we create the error log in a ABAP program
Thanks,
srinivas.

Hi,
Refer to FM's in the Function Group SBAL. For a change most of the FM's have been well documented. Also have a look at the DEMO pgms. Se38---->SBALDEMO & F4.
Regards
Raju Chitale

Read the intial version of an ABAP Program

Hi,
I need to download the first and the last version of an ABAP Program into a flat file. I used the "read report" statement and download the current active version of the program which is the last version but I need the initial version of the program too.
If we need to use one of the below function modules what would be the parameters to be passed into them,
SCWB_GET_ABAP_CODE_OF_OBJECT
RS_DETERMINE_OBJECT_SOURCE.
Please advise.
Regards,
Prabaharan.G

Hi,
I tried passing the version number as 1 but though the function module does not give "no versions" message, it does not give any entries in the internal tables.
Could you please try it once and let me know the results.
Regards,
Prabaharan.G

Download the SAP NetWeaver Application Server ABAP Trial 7:03 64-bit

I can not download the SAP NetWeaver Application Server ABAP Trial 7:03 64-bit complete, the file size is 3,912 gb and I can only download 2 gb.
How can I download the full file?
thank you

https://store.sap.com/sap/cpa/download/20/0000000218?tkt=6728195BC9A41D6FDC99371FC9BB49E9_20140521182535.4356890&sap-lan…

Name the infotypes we uplode using abap programs

Hi,
can anyboby let me know, Name the infotypes we uplode using abap programs?
Thanks

IT0008
IT0045
IT0589 ETC
some of them can be made through LSMW also but we use BDC . the main reason is we wont find Feilds to upload those data in templates

Startrfc - SAP utility to invoke ABAP programs from External systems

We have used the startrfc uitlity that comes along with the SAP Presentation CD. This is bundled with the SAP RFC SDK kit. The startrfc utility can be used to invoke ABAP programs from external systems or servers.
When using the startrfc from the SAP server using the parameters
startrfc -h 10.60.0.31 -s 01 -c 100 -u USERNAME -p PASS -F <Function Module> -E TPPARAM=\usr\sap\trans\bin\tp_domain_<SID>.PFL -T LIST,300,w=list.txt
the desired results are achieved.
However when using the same startrfc with the exact parameters from another server we get the message " Incorrect user or password". If we use the SAP GUI from this server to connect to the SAP server using the same username and password we are able to connect to the SAP system.
Has anyone encountered any similar issues with Startrfc? Any suggestion will be appreciated.
Thanks,
~Nilesh

Hi NIlesh,
Did you check that the password and user ID entered are in capita letters?
Thanks and Regards,
RK

Need to find SAP query for corresponding ABAP program.

Hello SAP Experts,
I have an ABAP program "AQDESYSTQV000001ORDERDETAILS==" in ECC 4.7. We had a client copy recently from ECC 4.7 to ECC 6.0. Now in ECC 6.0 I am unable to find this program in SE38.
Can you please tell me how to create this program in ECC 6.0 ? Also, by the name of this program it is clearly seen that this program is automatically created by using SAP query.
I tried to generate the program using SQ01, but system asks me for the SAP query.
Can you please tell me how to find the SAP Query for the corresponding abap program ? Also, the steps as in how to generate the program in ECC 6.0.
Thanks.

Hi Danish,
In the program name, the query name is always attached.
For example : The program name is , AQ10SD==========Z10SD_INVPRODL=
Here the query name is Z10SD_INVPRODL and if you go to transaction SQ01 and enter the query name
then you can find the infoset.
And also you can gernate the program with the help of query name.
Please try the same and let me know if any details are required.
Regards,
Darshana

After I Repair The Permissions On My Mac Pro, Then I Verify The Permissions And They Have To Be Repaired Again And Again. Why Does This Happen All The Time. Please Reply, James

Hi,
After I Repair The Permissions On My Mac Pro, Then I Verify The Permissions And They Have To Be Repaired Again And Again.
Why Does This Happen All The Time.
Please Reply,
James

As long as the report ends up with 'Permissions repair complete' then, as far as permissions go, you are fine. You can ignore the various statements in the report:
Permissions you can ignore on 10.5 onwards:
http://support.apple.com/kb/TS1448
Using 'should be -rw-r--r-- , they are lrw-r--r--' as an example, you will see the that the permissions are not changed, but the | indicates a different location. This is because an update to Leopard onwards changed the location of a number of system components.
Poster rccharles has provided this description of what it all means:
drwxrwxrwx
d = directory
r = read
w = write
x = executeable program
drwxrwxrwx
| | |
| | all other users not in first two types
| |
| group
|
owner

Why the sap will compile the abap program again and again?

Similar Messages

Maybe you are looking for