Why we use this function module
Hi
why we use this function module 'LIST_TO_ASCI'.
regards,
sivakumar
hi,
using LIST_TO_ASCI you can get the list in TEXT format, but this will be with all the formatting you have done in your list, it wont be just field names and its values.
check this sample code.....
DATA BEGIN OF itab_list OCCURS 0.
INCLUDE STRUCTURE abaplist.
DATA END OF itab_list.
DATA: BEGIN OF vlist OCCURS 0,
filler1(01) TYPE c,
field1(06) TYPE c,
filler(08) TYPE c,
field2(10) TYPE c,
filler3(01) TYPE c,
field3(10) TYPE c,
filler4(01) TYPE c,
field4(3) TYPE c,
filler5(02) TYPE c,
field5(15) TYPE c,
filler6(02) TYPE c,
field6(30) TYPE c,
filler7(43) TYPE c,
field7(10) TYPE c,
END OF vlist.
SUBMIT zreport EXPORTING LIST TO MEMORY.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = itab_list
EXCEPTIONS
not_found = 4
OTHERS = 8.
CALL FUNCTION 'LIST_TO_ASCI'
EXPORTING
list_index = -1
TABLES
listasci = vlist
listobject = itab_list
EXCEPTIONS
empty_list = 1
list_index_invalid = 2
OTHERS = 3.
IF sy-subrc NE '0'.
WRITE:/ 'LIST_TO_ASCI error !! ', sy-subrc.
ENDIF.
~~Guduri
Similar Messages
-
How can i use this function module
Hai
How can i use this function module /SAPHT/SALES_ORDER_READ, already apply the some parameters in this function module, but it shows the error , please tell me, how to declare the parameters in this function module ,
thanks
neelimaHi
For a particular sales order,you have to pass the order number and the item number in the sales order.
It will display the rest of the values which u can capture them using internal tables.
Regards,
Vishwa. -
How to use this function module on abap hr GET_PDSNR_RANGE
how to use this function module on abap hr GET_PDSNR_RANGE
thankx.PASS INETRNAL TABLE WITH SOME DATA TO TABELLE FOR GENERATING PDSNR SEQUENCE
-
Why we use ssf function module in mart forms
urgent
Hi,
A function module is generated whenever a Smart Form is activated.
This Smart Form could be called from the driver program by calling this function module .
By using "SSF_FUNCTION_MODULE_NAME" the user can obtain
the function mudule generated by the Smartform. The input
parameter is the SMARTFORM name the output parameter is the
function module generated .It has to be type RS38L_FNAM.
After getting the output parameter . CALL FUNCTION(output
parameter name).
Reward if useful.
Regards,
Swetha. -
How to use this function module
Guys I want to use this function moudle(/SAPAPO/TS_DM_SET ) to uodate key figures ,
but what are the key values to update key figures .
Please guide me .,HI Arul,
i_header is basically SAPscript: Text Header. You have
pass the values like TDOBJECT - Texts: application
object, TDNAME - Name, TDID - Text ID, TDSPRAS -
Language Key thses are the main values you to pass to i_header. -
How to use this function module DP_CREATE_URL
hi,
I am using the following function module DP_CREATE_URL
now there i have to pass a parameter called as data,
wat to pass to DATA and how to create it
im am displayin an image from desktop onto a container in the screen using the class cl_gui_picture
for tat i need to use the above function module to generate the URLHi Amit,
I'm not sure if I understand your problem. Is your image stored on a frontend? In that case use GUI_UPLOAD first to get the image in an internal table.
Regards,
John. -
How to use this function modules
Read Function modules FIRST_DAY_IN_PERIOD_GET and LAST_DAY_IN_PERIOD_GET to ge the first and last dates of the periods entered on the selection screen. Here Year = First 4 characters and Period = Next two characters of YearPeriod field of the selection screen.
* get the first day of the period
CALL FUNCTION 'FIRST_DAY_IN_PERIOD_GET'
EXPORTING
I_GJAHR = wgjahr
* I_MONMIT = 00
I_PERIV = 'V9'
I_POPER = wbuper
IMPORTING
E_DATE = wfirstday
EXCEPTIONS
INPUT_FALSE = 1
T009_NOTFOUND = 2
T009B_NOTFOUND = 3
OTHERS = 4.
* if today is not the first day of the period, return an error.
if sy-datum <> wfirstday.
* Date is not the first day of the fiscal period.
MESSAGE E003(ZBW).
endif.
CALL FUNCTION 'LAST_DAY_IN_PERIOD_GET'
EXPORTING
I_GJAHR = LOC_YEAR
I_PERIV = '01'
I_POPER = LOC_POPER
IMPORTING
E_DATE = LOC_DATE
EXCEPTIONS
INPUT_FALSE = 1
T009_NOTFOUND = 2
T009B_NOTFOUND = 3
OTHERS = 4.
L_S_RANGE-LOW = LOC_DATE.
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'EQ'. -
Regarding how to use the function module *control_form* in scripts
HI friends,
Can any one tell why and where do we use the function module control_form in scripts. Can you give me a small scenario how to use in scripts.hi satish,
by using this function module we can pass the control
commands to FORM THROUGH ABAP/4 PROGRAM.
see the following example:
TABLES: kna1.
DATA: BEGIN OF it_kna1 OCCURS 0,
kunnr LIKE kna1-kunnr,
name1 LIKE kna1-name1,
ort01 LIKE kna1-ort01,
land1 LIKE kna1-land1,
END OF it_kna1.
DATA:records TYPE i,
window TYPE i value 1.
select-options:s_kunnr for kna1-kunnr.
SELECT kunnr name1 ort01 land1 FROM kna1 INTO TABLE it_kna1
where kunnr in s_kunnr.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
form = 'ZSCRIPT4'
language = sy-langu.
LOOP AT it_kna1.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ELE1'
function = 'SET'
type = 'BODY'
window = 'MAIN'.
DESCRIBE TABLE it_kna1 LINES records.
IF window lt records.
window = window + 1.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'NEW-WINDOW'
EXCEPTIONS
UNOPENED = 1
UNSTARTED = 2
OTHERS = 3
ENDIF.
ENDLOOP.
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT =
RDI_RESULT =
TABLES
OTFDATA =
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SEND_ERROR = 3
SPOOL_ERROR = 4
CODEPAGE = 5
OTHERS = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
thanks,
raji -
Error while using the function module..pack_handling_unit_dlvry
Hi all...
while using the function module pack_handling_unit_dlvry,
we need to pass the handling unit number as per the functionality we require.
but the mandatory field for the function module is the handling unit number in the form of bar code..
so how to use this function module..
All the useful answers will be regarded..
Regards,
Saroja.Have you tried using BAPI BAPI_HU_CREATE. Also view Function Module Documentation on its usage.
-
How to use BAPI_MATERIAL_AVAILABILITY Function Module....
Hi Experts,
I want to know actual free available quantity (ATP Qty.) for mass materials,
How to use BAPI_MATERIAL_AVAILABILITY function module ?
I have select all material from MARA and inserted in itab.
LOOP AT ITAB.
CALL FUNCTION 'BAPI_MATERIAL_AVAILABILITY'
EXPORTING
PLANT =
MATERIAL =
UNIT =
CHECK_RULE =
STGE_LOC =
BATCH =
CUSTOMER =
DOC_NUMBER =
ITM_NUMBER =
WBS_ELEM =
STOCK_IND =
DEC_FOR_ROUNDING =
DEC_FOR_ROUNDING_X =
READ_ATP_LOCK =
READ_ATP_LOCK_X =
IMPORTING
ENDLEADTME =
AV_QTY_PLT =
DIALOGFLAG =
RETURN =
TABLES
WMDVSX =
WMDVEX =
I dont know how to use it.
pl. guide us.
YusufHi,
data: iwmdvsx type table of bapiwmdvs with header line,
iwmdvex type table of bapiwmdve with header line.
parameters: p_matnr type mara-matnr,
p_werks type marc-werks,
p_meins type mara-meins.
call function 'BAPI_MATERIAL_AVAILABILITY'
exporting
plant = p_werks
material = p_matnr
unit = p_meins
CHECK_RULE =
STGE_LOC =
BATCH =
CUSTOMER =
DOC_NUMBER =
ITM_NUMBER =
WBS_ELEM =
STOCK_IND =
IMPORTING
ENDLEADTME =
AV_QTY_PLT =
DIALOGFLAG =
RETURN =
tables
wmdvsx = iwmdvsx
wmdvex = iwmdvex.
check sy-subrc = 0.
Text
ATP information
Functionality
Using this function module, you can determine the receipt quantity still available for a particular material in a certain plant according to ATP logic (MRPII).
The availability check is carried out on transferring the material number, the plant and the input table (WMDVSX). The scope of the check, that is, which stocks, receipts and issues are to be included in the check is defined by the combination of checking group (material master) and cheking rule. In the function module, the system uses the checking rule defined in Sales & Distribution (A). You can overrule this checking rule by using an interface or a user-exit (exit_saplw61v_001). A similar procedure is also valid for the plant parameters. The customer number in the user-exit means that the plant selection can be controlled via the customer. If no plant parameters are given via the interface, the system uses the parameter 'WRK' saved in the user's fixed values.
The results of the availability check are recorded in the output table (WMDVEX). This table contains dates and available receipt quantities (ATP quantities). The results of the check depends on the following entries:
If no date and no quantity is transferred, the system displays the ATP situation from today's date into the future as the result.
If only a date and no quantity is transferred, the system displays the ATP situation from the corresponding date as the result.
If both a date and a quantity are transferred, the system calculates the availability situation for the quantity specified.
In the last two cases, the parameter 'DIALOGFLAG' is supplied. This can result in the following:
' ' (blank) <=> quantity completely available
'X' <=> only partial quantity available or not available at
all
'N' <=> Material not included in the availability check
(Material not relevant to the availability check)
The system also displays the end of the replenishment lead time (ENDLEADTME).
regards -
How to use the Function Module RH_READ_INFTY_1001...
Hi,
Can any one Tell me .. How to do the same functionality .. given below (select).
Using the Function Module RH_READ_INFTY_1001...
*reads CP (Central Person) based on BP (Business Partner)
Select single objid (Object ID)
from hrp1001
into gv_sobid
where subty eq 'B207'
and sclas eq 'BP'
and sobid eq is_header-partner.
*reads P (Person) Based on determined BP (Business Partner)
select single sobid (ID related Object)
from hrp1001
into gv_sobid
where subty eq 'B209'
and otype eq 'CP'
and objid eq gv_sobid.
*determines UserID from IT0105 for determined personell ID
select single usrid
from pa0105
into gv_usrid
where pernr eq gv_sobid
and subty eq '999'.
Reply ASAP....
Answers will be Rewarded...objects-plvar = l_plvar.
objects-otype = 'S '.
objects-sobid = l_positions-objid.
APPEND objects.
CLEAR i1001_itab. REFRESH i1001_itab.
CALL FUNCTION 'RH_READ_INFTY_1001'
EXPORTING
* AUTHORITY = 'DISP'
* WITH_STRU_AUTH = 'X'
istat = '1'
* EXTEND = 'X'
subty = 'A008'
begda = l_keyda
endda = l_keyda
* CONDITION = '00000'
* SORT = 'X'
* WITH_EV = ' '
* ADATA = 'X'
TABLES
i1001 = i1001_itab
objects = objects
EXCEPTIONS
nothing_found = 1
wrong_condition = 2
OTHERS = 3.
IF sy-subrc <> 0.
CLEAR i1001_itab. REFRESH i1001_itab.
CLEAR mngr_nr.
ELSE.
READ TABLE i1001_itab WITH KEY sclas = 'P'.
IF sy-subrc = 0.
mngr_nr = i1001_itab-sobid.
ELSE.
THis is the sample code to use function module using this function module you can get upto HRP1001 selection for userid you need to use same select you write for PA0105 -
How to use the function module ....
hi
how to use the function module ssf_function_module_name in smartformsHi..
If you are using this Function module, you can get the generated function module name of smartform dynamically. It is good progrmaming practice to get the fucntion module name dynamically because there might be some problems if you are hard coding in program.
This will return the name of the function module and then from the exporting parameters you can use the fucntion module name to pass parameters to Smartforms.
Check this link.I am expalining here how to use this function module.
https://wiki.sdn.sap.com/wiki/pages/pointstab/viewpageversion.action?pageId=36109&version=2
Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
<b>Reward points if useful</b>
Regards
Ashu -
How to make this function module as RFC to get data from different system?
Hi
I am trying to use following function module . This function module is used to copy data from one cube to another cube within same system however I need a this should happen across two different system. How can I use this function module to make it remote call to different system and do the same function what it is doing ?
Name of function module -
RSDRT_INFOCUBE_DATA_COPY
Any help would be really helpful
AGHI,
let us say you want to copy the data of a cube in system A to a cube in system B .
1) create a RFC function module in system B (in this function module call the function module RSDRI_CUBE_WRITE_PACKAGE to update the data), this RFC function module should have same parametersa as RSDRI_CUBE_WRITE_PACKAGE .
2) write a program in system A .. read the data from the infocube using the function module RSDRI_INFOPROV_READ and call the RFC function module in system B that you have created..
for the details of the parameters to pass to these two function modules use the RSDRT_INFOCUBE_DATA_COPY and get the required code
Thanks
mahesh -
"CNTL_ERROR" raised , when using a Function Module
Hi All,
I am trying to reuse an existing Function module. This function module, fetches data in an internal table and creates a popup using ALV, using the Call Screen statement. I cannot modify this function module.
Is there any method, how I can use this Function Module in Web Dynpro Application(which would be executed from portal) , because if I use it directly, I get an error .. Exception condition " CNTL_ERROR" raised as the Custom Container object doesn't get created. As far as I understand, we cannot use such a function module directly, but please let me know if there Is any work around apart from creating a new function module.
Best Regards,
Preethi Santhanam.Refer these threads (Ans by Thomas) :
CNTL_ERROR while calling an FM through WebDynpro -
In scripts using ADDR_GET_NEXT_COMM_TYPE function module
hi,
in my program these two function modules are used to send email.
ADDR_GET_NEXT_COMM_TYPE
CONVERT_COMM_TYPE_DATA
i want to know in format the email will be ,
in otf or in pdf, where we can find it.
using this function module can we able to send e-mail for multiple receipts ?Try this sample code...
I guess it will help you..
Sample Code
Internal Table declarations
DATA: i_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
i_tline TYPE TABLE OF tline WITH HEADER LINE,
i_receivers TYPE TABLE OF somlreci1 WITH HEADER LINE,
i_record LIKE solisti1 OCCURS 0 WITH HEADER LINE,
Objects to send mail.
i_objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
i_objtxt LIKE solisti1 OCCURS 0 WITH HEADER LINE,
i_objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE,
i_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
Work Area declarations
wa_objhead TYPE soli_tab,
w_ctrlop TYPE ssfctrlop,
w_compop TYPE ssfcompop,
w_return TYPE ssfcrescl,
wa_doc_chng typE sodocchgi1,
w_data TYPE sodocchgi1,
wa_buffer TYPE string,"To convert from 132 to 255
Variables declarations
v_form_name TYPE rs38l_fnam,
v_len_in LIKE sood-objlen,
v_len_out LIKE sood-objlen,
v_len_outn TYPE i,
v_lines_txt TYPE i,
v_lines_bin TYPE i.
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZZZ_TEST1'
importing
fm_name = v_form_name
exceptions
no_form = 1
no_function_module = 2
others = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
w_ctrlop-getotf = 'X'.
w_ctrlop-no_dialog = 'X'.
w_compop-tdnoprev = 'X'.
CALL FUNCTION v_form_name
EXPORTING
control_parameters = w_ctrlop
output_options = w_compop
user_settings = 'X'
IMPORTING
job_output_info = w_return
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
i_otf[] = w_return-otfdata[].
call function 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = v_len_in
TABLES
otf = i_otf
lines = i_tline
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
others = 4.
Fehlerhandling
if sy-subrc <> 0.
endif.
loop at i_tline.
translate i_tline using '~'.
concatenate wa_buffer i_tline into wa_buffer.
endloop.
translate wa_buffer using '~'.
do.
i_record = wa_buffer.
append i_record.
shift wa_buffer left by 255 places.
if wa_buffer is initial.
exit.
endif.
enddo.
Attachment
refresh:
i_reclist,
i_objtxt,
i_objbin,
i_objpack.
clear wa_objhead.
i_objbin[] = i_record[].
Create Message Body
Title and Description
i_objtxt = 'test with pdf-Attachment!'.
append i_objtxt.
describe table i_objtxt lines v_lines_txt.
read table i_objtxt index v_lines_txt.
wa_doc_chng-obj_name = 'smartform'.
wa_doc_chng-expiry_dat = sy-datum + 10.
wa_doc_chng-obj_descr = 'smartform'.
wa_doc_chng-sensitivty = 'F'.
wa_doc_chng-doc_size = v_lines_txt * 255.
Main Text
wa_doc_chng-doc_size = ( v_lines_txt - 1 ) * 255 + strlen( i_objtxt )
clear i_objpack-transf_bin.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_txt.
i_objpack-doc_type = 'RAW'.
append i_objpack.
Attachment
(pdf-Attachment)
i_objpack-transf_bin = 'X'.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
Länge des Attachment ermitteln
describe table i_objbin lines v_lines_bin.
read table i_objbin index v_lines_bin.
i_objpack-doc_size = v_lines_bin * 255 .
i_objpack-body_num = v_lines_bin.
i_objpack-doc_type = 'PDF'.
i_objpack-obj_name = 'smart'.
i_objpack-obj_descr = 'test'.
append i_objpack.
clear i_reclist.
i_reclist-receiver = '[email protected]'.
i_reclist-rec_type = 'U'.
append i_reclist.
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = wa_doc_chng
put_in_outbox = 'X'
TABLES
packing_list = i_objpack
object_header = wa_objhead
CONTENTS_BIN = i_objbin
contents_txt = i_objtxt
receivers = i_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
Regards,
SaiRam
Maybe you are looking for
-
Error while starting the weblogic server
hi all i got the below error while trying to start the weblogic server on windows machine (win2k3-sp1). please suggest me the best way to overcome from this problem. thanks in anticipation. "FATAL ERROR: Exception from System.loadLibrary(smjavaagenta
-
Goods Issue of a Delivery After its been Updated.
I am using SD_DELIVERY_UPDATE_PICKING_1 to modify the Delivery's picking qty, Then I use BAPI_OUTB_DELIVERY_CHANGE to change details on the delivery. These all work good. But since I do not know how to do a goods issue with BAPI_OUTB_DELIVERY_CHANGE,
-
Photoshop Elments 3 Organizer vs. Photoshop Album 2
Hi Leute, ich wollte mal fragen, ob mir jemand Infos geben kann, was an dem Organizer in Photoshop Elements 3 anders/besser ist als Photoshop Album 2. Danke Im Vorraus
-
Hi there. I'm a long time iTunes user - and I've purchased quite a few songs from Apple. Recently, however, some of the purchased songs needed re-loaded onto my computer. To make a long story short, a few of them did not make the transfer. They're lo
-
Maintain a custom cost centre heirachy
Hi all, Just wondering if someone could help me with the following: I am looking to maintain a custom cost centre heirachy, transaction OKENN shows the current ones, however I need a few pointers on how they are set and deleted to assist in maintaini