Why when I create a new path or layer in Illustrator CC it goes to the bottom of my layers list? Where can I set it up to create them at the top of the list as it usually does?
I don't know if i did something wrong and i didn't notice it....but i was working normally on Illustrator, and suddenly all the new layer i created when to the bottom of the compound of layers i had. It had never happened to me before and i don't know what to do to reset it. It is really annoying.
I really appreciate if somebody can help me!
Thank you!
Select the drawing mode at the bottom of the tool panel.
Similar Messages
-
Why when I register a new instance of app ias6, the File - New - Server... has no response
Why when I register a new instance of app ias6, the File -> New -> Server... has no response
Contact iTunes support : http://www.apple.com/support/itunes/contact/
-
I don't know why when i used a new apple ID and new icloud ID all my information is done. My contracts are all gone. This only happen on on phone. When i was changing the other phones it works fine. Nothing is lost. So i dont understand when i was changing the apple ID and icloud Id the information is lost. You know when you go to setting and you click iCloud and i saw that the contracts book was light on. Does that matter? Does that cause i lost my contracts?
I don't think the iPhone is really designed for people to be switching from one Apple ID to another so when you do so you may experience problems. You have two options on the iPhone for where you can be accessing contacts, from iCloud and the iPhone itself. You can also pull contacts off of a SIM card but they are then stored on the iPhone and not accessed from the SIM card.
You could try this;
1. Go to Settings > iCloud
2. Sign in to the Apple ID that you want the Contacts from,
3. Turn "On" the Contacts slider and let it download all of your contacts
4. When it's done downloading, turn the slider back to "Off" and you should get a message like this..."What would you like to do with the previously synced iCloud contacts on your iPhone?"
5. Then select "Keep on My iPhone"
Then after that you can then sign out of that Apple ID and into your other Apple ID and the contacts shouls still be there. -
Why when i buy a new Nokia phone i have to buy som...
I've purchased the new NOKIA 6233. I realized that all the USB cable drivers and software work under OS Windows 2000 or Windows XP. I have Windows 98 and everything works ok. Why when i buy a new phone i also have to pay to upgrade my computer? Why Nokia doesn't provide drivers for all users?Message Edited by spero on 28-Aug-2006
07:13 AMIt does not and will not work with windows ME. There is nothing that you can do to change that fact.
Win ME is old, obsolete and unsupported by microsoft.
You have three choices for updating your phone:
1) Buy and install win xp or vista, then install the software updater.
2) Update you phone using someone else's pc which has xp or vista.
3) Visit a care point and ask them to update your phone.
Care points:
UK
http://www.nokia.co.uk/A4228006
Europe:
http://europe.nokia.com/A4388379
Elsewhere:
http://www.nokia.com and select your country. -
I am trying to authorise my new macbook air for i-tunes and it won't let me. I try to de-authorise all the other computers and it says I can only do this once a year and have to wait until the 7th Feb. It does not give me an option to authorise this computer
Always remember to 'de-authorize' you computer when selling or sending for service. If sending for repairs you might not get the same mother board or HD back and some how this counts as an authorized computer against your count.
MJ -
Why when I try to update certain app it require an old email address and password I have not used for years and I do I get to update them on my new details
Apps are tied to the Apple ID that was used to purchase them and you will always need to use that ID and password in order to update them.
Saying that you do get to update them on your new details makes no sense at all. -
How can I reset Safari with all components? On my MacBook with Lion, Safari does not start, does not react immediately after trying to open it. Installing a new Safari does not help. Removing parts of Safari in the Library does not help. Where can I find and remove all components as LastSession and TopSites?
The only way to reinstall Safari on a Mac running v10.7 Lion is to restore OS X using OS X Recovery
Instead of restoring OS X in order to reinstall Safari, try troubleshooting extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.
If it's not an extension or plug-in issue, delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test. -
In Options --> General --> I want the option to "Show my windows and tabs from last time" '''''AND''''' "Show my homepage", but that choice isn't given. When I open a new tab, I'd like to see my iGoogle page, not a blank screen. Hope you can help. D
You can middle-click or Ctrl left-click the Home button on the Navigation toolbar to open the Home page in a new tab.
You can look at one of these extensions:
* NewTabURL : https://addons.mozilla.org/firefox/addon/newtaburl/
* New Tab Homepage : https://addons.mozilla.org/firefox/addon/new-tab-homepage/ -
I am trying to install windows 7 on my macbook pro 13", when i run bootcamp it tells me that there is not a windows support software available for my computer. Where can i get the windows support software for my macbook?
Apple only supports Windows on certain hardware.
http://www.apple.com/support/bootcamp/
Apple provides their framework for Windows to run on a Mac, a piece of software called a Hybrid MBR that bridges the gap between how Windows reads the drive partition table (MBR) and EFI/GUID partition table that Mac's use.
It doesn't mean Windows can't run on your Mac, a third party solution called rEFIt will also bridge the gap and allow booting of more that just Windows, Linux as well for a triple booting computer.
Your hardware has to meet the other requirements the second and third operating system needs as as being able to install drivers that will work for your hardware, especially the fans or they will run loud and fast by default.
http://refit.sourceforge.net/
This above is a advanced procedure which requires knowledge how computers and various operating systems, drive formats and so forth work.
I even admit I don't know everything myself, but I experiment on a separate piece of Mac hardware (out of warranty/AppleCare) designed for this purpose so in case something screws up I'm not taking down my only machine and can use the other to get online and find solutions.
There is a very high potential for losing your data if your using advanced/non-Apple methods to install Windows on your only Mac where Apple doesn't support it. Also one shouldn't be doing this on Mac hardware that is under AppleCare or warranty as it might be voided. Proceed at your own risk and education. -
I am trying to sign in to attend a session and it says 'Invalid user or password. Please try again.' I have reset my password and it still doesn't work. I created a new AdobeID and it still doesn't work. I need to attend this training. How can I get in?
Sorry to hear about this problem. What site are you trying to log in on? Is it a Mozilla site? Usually you don't need to register or sign in to a Mozilla site to use Firefox. Usually you can just go straight to where you want to go.
-
I scanned an Item from my computer to my documents. The scan was completed. However, when I searched in my documents, the Item was not there.
Where can I find the item scanned?Most scanners default to Pictures folder or the Desktop.
If you select All My Files and Arrange by Date Added you should be able to find the file.
If you turn on Show Path bar and Show Status bar for your Finder Window under View in the Menu bar, when you select the file you will see the path of the file in the bottom of the Finder window. -
Why when I use Brush Tool on a layer mask, I must click on somewhere else then I am able to see my effects of my previous brush on my mask.
If I don't click click on somewhere else, I cannot even see my current brush effects
This kind of problem really slow down my work flow. So if you guy know the solution of my problem, please let me know.
ThanksUpdate your graphics driver/ turn off GPU usage in the performance prefs. You have an issue with hardware-based transparency handling most likely. Otherwise you could have an issue with your input device, but since you have not provided any system info, we can't really know anything.
Mylenium -
Where can I give feedback regarding Aperture?
I'd love to see the ability to removes EXIF data when exporting, especially to social networks.Robert,
For any normal Export, simply cilick the list of option and further click on Edit. There deselect to include Metadata, and there will be no EXIF data exported. But no copyright info either.
The option already exists to do what you want. Once a normal Export has deselected that, I believe even exports via plugin for say FB will not have it either. I tested with an export to SmugMug after deselecting in an earlier ordinary export, and EXIF info was not transmitted.
Ernie -
Where can I download lightroom 6, but NOT LR 6 CC? Only the new LR6 without any cloud features. On the dowloadsite I find only CC-downloads.
Thanks
MartinHi Martin,
Please follow the steps given in the article.
Adobe Photoshop Lightroom Help | Serialize Lightroom CC trial to activate as Lightroom 6
Hope this helps.
Regards,
Sumit Singh -
I think I have it working on my iPhone 5. But, I do not see how I can control the exit point that I would like for the VPN. Are all the exit points shown in the VPN setting now going to work with Open VPN, or do they remain PPTP? If I am reading correctly, they look like they remain PPTP. If I cannot control the exit point for open VPN, which exit point is the default in the profile you provided me?I note that Open VPN Connect does not work with any of the new 64 bit devices like the iPhone 5S, the iPad Air, and the new iPad MIni. Is there any chance that you guys will come up with an update for your app so that open VPN can be made to work on all iOS devices? That would be nice, particularly if the Open VPN Connect app does not give me a choice of exit points.Thanks,
I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?
Just a quick note to tell you that Open VPN has updated their app so that it is compatible with 64 bit ARM devices like the iPhone 5S, the iPad Air, and the iPad Mini Retina.That does not resolve the problem of how to easily choose among the various possibilities for the exit server. We need to find an easy way to choose.Thank you for trying the new Firefox. I'm sorry that you’re unhappy with the new design.
I understand your frustration and surprise at the removal of these features but I can't undo these changes. I'm just a support volunteer and I do not work for Mozilla. But you can send any feedback about these changes to http://input.mozilla.org/feedback. Firefox developers collect data submitted through there then present it at the weekly Firefox meeting
I recommend you try to adjust to 29 and see if you can't make it work for you before you downgrade to a less secure and soon outdated version of Firefox.
Here are a few suggestions for restoring the old design. I hope you’ll find one that works for you:
*Use the [https://addons.mozilla.org/en-US/firefox/addon/classicthemerestorer/ Classic Theme Restorer] to bring back the old design. Learn more here: [[How to make the new Firefox look like the old Firefox]]
*Use the [https://addons.mozilla.org/en-US/firefox/addon/the-addon-bar/ Add-on Bar Restored] to bring back the add-on bar. Learn more here: [[What happened to the Add-on Bar?]]
Maybe you are looking for
-
I am trying to convert some existing sql to use TopLink ExpressionBuilder. I have a particular type of thing which I can't find a good solution for. I want to include a calculation, so for example, I want to say Where MY_COLUMN * 10 > REQUIRED_VALUE
-
How to make the date format in ipod the same as in itunes?
When I look at my podcasts in itunes, the dates come up as dd/mm/yyyy (which is correct), however, when I look at my podcasts on the ipod, the date comes up as mm/dd, which is very confusing. I cannot figure out how to make it so that the date format
-
ORA-06512 - Need some direction
HPUX platform 10.2.0.2 Oracle. So I've been trying to track this dow myself, and I understand what the error means and what needs to be done. In my case: ORA-20000: ORA-06502: PL/SQL: numeric or value error: character string buffer too small -6502 OR
-
I am using safari via my windows computer, and I use yahoo emailing and on yahoo they have this thing where I can instant message people via the email itself through the internet web browser window, well...safari doesnt allow it because its not compa
-
Windows Server 2008 Standard 64Bit
We need Windows 2008 Standard 64 bit. So please convert Windows 2008 Standard 32bit to Windows 2008 Standard 64bit. Please send me the link of Windows 2008 Standard 64Bit ISO Image File Regards Sandeep Sahadevan