Why with my dlink router i can't recieve and send messages, why with my dlink router i can't recieve and send messages

i can't use the green app of my ipod at home...but when i'm in another wifi place i can use it...please help me!!! T.T

If you are talking about the Messages app, try going to Settings>wifi and change the DNS to Googles's 8.8.8.8

Similar Messages

How can I get my AE to work in 802.11n mode with my dlink router?

Hi all,
I have a dlink 655 wireless n router that I use for my network and a recent AE with 802.11n capability that I use to connect iTunes to my home stereo.
I have a mix of computers at home and only my imac has 802.11n capability. I work alone in the day so to speed things up, I change the wireless setting on my dlink router to 802.11n only mode. Normally, it is in a mixed mode of 802.11g/n for the other non n computers on the network.
My imac connects fine when in 802.11n only mode but the AE looses connection. As it is 802.11n capable, I was wondering why this happens?
I tried checking Airport Utility for a 802.11n only mode or something similar, but didn't find anything. Will the AE only work in 802.11n mode when on the 5ghz frequency? if so, that would explain why it doesn't connect with the dlink 2.4ghz router in n mode.
Any ideas?? Thanks!

Hi. Thanks for the reply. It turns out that the router was not going into n mode because of the security I set on it. I finally figured this out and the AE did connect in n mode after all.
Well at least it's working now but I feel a little bad for posting when it was my fault!!
Cheers!

Why my iphone 4 connect to wifi, but when i open safari and search something it say i not connect.. but in the same house my sister using iphone4 too but she can online with the same router

why my iphone 4 connect to wifi, but when i open safari and search something it say i not connect.. but in the same house my sister using iphone4 too but she can online with the same router. i go and check over the detail of the network i connected, over the ip address and subnet mask have the numbers, but over the DNS and router don't have any number...isit the problem???? i can online at any other place but just my home cant...y????

Hey confuddled_chica!
Try the steps in the article below to troubleshoot this issue:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

IS THERE ANYONE LEGITIMATE THAT KNOWS WHY I CAN CONNECT TO INTERNET WITH A IBOOK G3 AND NOT OPEN WEB PAGES? ONLY HAPPENS WITH MY LANDLORDS ROUTER THAT HE HAS PROVIDED THE PASSOWRD FOR. ONLY WAY I CAN CONNECT TO HIS SERVICE IS IF HE HAS FIREWALL DOWN. WE

PLEASE ONLY RESPOND IF YOU KNOW HOW TO CORRECT THE PROBLEM. I'M CONNECTED TO MY LANDLORDS INTERNET VIA AN EXT NETGEAR ROUTER, PASSWORD PROTECTED, THAT HE HAS PROVIDED WITH A G3 IBOOK. FULL SINGAL, CAN'T OPEN WEB PAGES. HAS NEVER HAPPENED BEFORE.

That's because your landlord probably is using WPA2 encryption or 802.11g or 802.11n wireless. The iBook G3 lacks support for WPA2 encryption, which is much stronger than WEP and the original WPA.   It also only has support for 802.11b.     If you want to join a newer router with a secure firewall, get an 802.11g or better wireless ethernet bridge.
P.S. Please avoid from using all UPPERCASE.     It is hard to read, and in internet etiquette it means you are attempting to shout and be rude. I'm sure that was not your intent. So please avoid from doing that again. Thank you.
P.P.S. 10.7.1 can't run on an iBook.   Are you sure you have an iBook and 10.7.1 is on it? If it doesn't say iBook on your screen frame, or Apple menu -> About This Mac doesn't say Mac OS X 10.7.1, it is not 10.7.1, or an iBook.    MacBooks, which replaced iBooks in 2006, and later came out with Core2Duo and Core i processors, are the only Apple notebooks that can run 10.7.1.

Why can i get a connection w/my wireless laptop with this router (WRT54GS ) but not on the desktop?

I have an excellent signal w/this laptop (wireless) but when I try to use the desktop with the same router it wont go. Do I need driver download? Do I need an IP address for the router? I use tech support for connecting the desktop to the internet straight from the modem they sent me but because I didnot buy the router from them, they wont help me figure out once I plug in the router and setup more than one machine, i cant do it. Initailly, I setup everything w/my laptop being the main computer in my home until I got this desktop recently. So knowing the desktop is fine because it works straight from the modem, and the laptop works w/the router and modem hooked up together but not the desktop, what the HECK is the problem? I dont have any cd or anything w/this router because when I moved, i never found the box it came in again. Is there someplace online I can find what I need? Im wondering how I will know if I have a response from someone on this thread? will I get an email from this site? gosh Im confused.
(Mod Note: Email address removed.)
Message Edited by kent07 on 10-28-2009 07:29 PM

How you are trying to use the desktop...wired or wireless?
If you are trying to connect the computer to the router via an Ethernet cable then,try changing the cable.Check the ip address you are getting on the computer...
Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1 (assuming your router is 192.168.1.1)...
If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter...If it gives you request timed out then disable any firewalls, security softwares on the computer...
If you get 4 replies then type ping 4.2.2.2 and press Enter, if you get request timed out, then you need to upgrade your router's firmware...If you get 4 replies then type ping yahoo.com and press Enter...If you get replies for Yahoo then you should get the Internet after adjusting the browser settings...
Adjusting Browser Settings : Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on OK...Close the IE and re-open it...
If yahoo times out then provide static DNS on your LAN Connection...
Click on the Start button >>> Settings >>> Control Panel >>>Network Connections- Right click on the icon for Local Area Connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the Following DNS Settings' Preferred DNS 4.2.2.2 Alternate DNS - 192.168.1.1>>Click on Ok button to Save and Click on "Close" on main Properties window...You should be able to go online...

Why can't I get my belkin router to communicate with my mac?

I got a belkin wireless router and every time I have tried to hook it up it will get to almost the last step and then say it can't communicate.
I am not sure what else to do. I guess I don't know what to do at all. I tried installing with the quick install cd that came with the router.
I am not sure if there are supposed to be settings I need to add or change in my mac or what settings i need to input in one of the steps hooking it up.
I halfway know what I am doing but to go much deeper in getting it hooked up, I have no clue.
Thanks so much for any help you can give me! I am just so tired of sitting on the floor in the corner with a laptop (my whole plan to getting a laptop so i could go wireless) and want a little freedom.
Christina

Hi Christina,
Welcome to the Discussions.
You can access the router's setup pages by connecting your iBook to it with an ethernet cable, launching Safari and entering 192.168.2.1 in the address bar and pressing enter. Click on the menu items on the left (you'll be asked for a password, by default there is none...just leave it blank and click OK) and enter the necessary information. Start with LAN Settings. The only thing you may have to enter there is the subnet mask of 255.255.255.0.
Next are the WAN Settings. You'll need to know the type of connection you have. Your ISP can supply you with that information.
Next are the Wireless Settings. Select a channel other than the default, name your network and turn on Broadcast SSID. That will help your iBook find the network the first time (turn it off later). Don't set any security until after you can connect then go back and enable WPA security.
Once it's setup, disconnect the ethernet cable and turn on AirPort. Select your new network in the drop down menu and you should connect. Select "Connect to a Specific Network" in System Preferences.Network and it will connect to it whenever the computer turns on.
Use the manual that came with the router. You want the manual setup section. Once you have all the info necessary and you get stuck, call Belkin's help line. They're very good and will get you connected.
John

Why doesn't my linksys router work with my airport express? I can't print!

I can't print to my hp photosmart 1315 with my airport connected to my linksys router. I can only print directly with USB. I had the airport express tested at the apple store and it worked fine with my printer, but now at home, on hte linksys wireless network, the green light is on but the printer doesn't print. I called the help line but they were no help...don't support linksys...
Please help me!
dabasman

In this configuration, you just need to set up the AX as a bridge to allow you Linksys router to continue to provide the NAT & DHCP services for the entire network.
To set up the AirPort Express Base Station (AX) as a bridge, either connect to the AX's wireless network or temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, using the AirPort Admin Utility (located in the \Applications\Utilities folder), make these settings:
Network tab
- Distribute IP addresses (unchecked)
- Apply the new setting.

I can not access my router with Firefox, but IE works fine. Why?

It worked fine until today then I received a message that Internet Explorer will not let Firfox access the Internet.

You can check the exceptions in Tools > Options > Privacy > Cookies: "Exceptions" to see if you have blocked cookies for live.com
You can inspect the permissions (exceptions) for the currently displayed website in "Tools > Page Info > Permissions".<br />
You can inspect the cookies for the currently displayed website in "Tools > Page Info > Security > View Cookies".

My Apple TV works perfectly with Netgear/Dlink routers but will not recognise a BT Home Hub. Why is this so?

I have an Apple TV2 which works well with my Ipad2 when it is networked through a Netgear or Dlink router. However, when I moved the device into another room and tried to connect it via a BT Home Hub, the Apple TV connected to the Internet but neither my Ipad nor my notebook was recognised on the network. Why should this be? I am unable to use the Apple TV to stream videos, photos and to mirror my Ipad.

Welcome to this forum.
This is a customer to customer forum only, where forum members, who are only BT customers, can help each other with BT Retail products and services.
Anything you post here does not go to BT. Although the forum is moderated by BT, not all posts are read.
This is a public forum which can be viewed worldwide, so please do not post any personal information, especially phone numbers, account numbers, fault numbers, address information or email addresses, as this could be used to impersonate you.
Its quite possible that the connection has been recovered, and re-used for another customer. The date you have been given would have been the next available date that a suitably skilled Openreach Field Technician would be available to re-provide the connection.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

How can I set up my time capsule as the primary base station with a centurylink router? I'm trying to extend my coverage, increase signal strength, and be able to connect a printer.

I recently moved and now I'm trying to set up my Time Capsule as the primary base station or router with an existing network that has a Centurylink modem/router. The TC still has the settings for my old network. I also have backups on it. I have the data backed up to another HD so it's not an issue to return it to factory settings if doing so deletes the back ups. Do I need to restore it to the factory settings to set it up? Also, what settings would I select on the TC (and the Centurylink modem/router) in order for the TC to serve as the router, instead of the Centurylink router? I want to be able to use the TC to back up my Mac's, print wirelessly, and improve overall performance. I tried setting the TC up and ended with 2 different networks. Can anyone please help me with this?

The TC has to plug into the existing modem router by ethernet.. you cannot use wireless.
You have a choice of which is router.. only if Centurylink agree to bridge their modem router.. this has to be done by the ISP and often they do not allow it.
Is your broadband cable or adsl or fibre or ???
If it is cable and you are allowed to purchase your own cable modem pick a pure modem version with no router in it.. plug the TC into it by ethernet.
Setup the TC in DHCP and NAT mode.. (depending on broadband type).
You must reset the TC to factory to do the setup.. no files are lost at all.
Here is my current recommended setup.. with Yosemite life has become harder than ever.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
ie Start from a factory reset. No files are lost on the hard disk doing this.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 and TCwifi for basestation and wireless respectively.
Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
5. Mount the TC disk in the computer manually.
In Finder, Go, Connect to server from the top menu,
Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
You might need to do some more work on the laptop itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
Tell us how you go.
Someone posted a solution.. See this thread.
Macbook can't find Time Capsule anymore
Start from the bottom and work up.. I have a list of good network practice changes but I have avoided Yosemites bug heaven.
This user has had success and a few others as well.
RáNdÓm GéÉzÁ
Here is why Yosemite has fundamental issues.
http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

My wife and i have an iPhone 5 6.1.2 firmware.. We both are having horrible wifi signals. We have done everything we can.. What update will fix this? I get full bars on my iPad 2 through my whole house.. Be standing right beside the router with iPhone NO

My wife and i have an iPhone 5 6.1.2 firmware.. We both are having horrible wifi signals. We have done everything we can.. What update will fix this? I get full bars on my iPad 2 through my whole house.. Be standing right beside the router with iPhones and it cuts in and out.. Drops from 3 wifi bars to 1

I am having the same problem with brand new Ipad Mini at my house.
It connects to the WiFi fine - but will not pull an IP address in DHCP mode, or if I set all the IP info statically - it still will not get any network access.
This doesn't look like a WiFi issue, as it does connect and is seen by the WiFi Access Point. All the normal WiFi fix stuff doesn't help.
- Using a Dlink DAP-2553 which is less than 2 months old.
Other devices connect fine, including Ipad 2.
This same Mini worked fine at another house and also connected to a mobile hotspot fine....so seems to be some weird IP issue with maybe this Access Point or maybe the older Router that I have (older Netgear)?
I am actually a network engineer and still have not been able to find a solution. Both the Ipad Mini and the Dlink WAP have the latest firmware loaded.
Wondering if anyone has found a solution to this problem.

Can't connect to internet wirelessly with WRT120N router

ok, it's nearly 4am and i've been trouble shooting this problem since 11pm... love the technology, but it completely evil...
let me start off by saying i'm not too tech savy. took a couple computer courses in high school and thought it was my passion but they got way above my head in college, so i settled for art (those classes are much easier to pass as long as you draw your homerwork, don't blow up your sculpture etc etc)
anywho, i bought a brand new computer today since i play wow and my old computer was nearing on a decade old and had nearly a dozen manufactury resets from all the viruses from downloaded music. i don't know the make of the new computer (just spent like five minutes looking over the box and it doesn't seem to say) and i literally walked into best buy and walked right up to the computer department store head and said, "which computer should i buy to play wow on for less than $600." he thought for like thirty seconds and pointed to an ASUS and i immediately bought it. took it home, watched tv for a couple hours, then went to set it up since i had a raid in like two hours, thinking, "brand new computer, nothing's gonna go wrong!..."
well it did. my router gives me grief from time to time, so i spent the first hour unplugging, resetting, refreshing (i think that's what the button by the blue lights that has the circling arrows does) and nothing. so then off to the interweb since... oh! this might be important! the one computer i'm on now that has a hardwired connection is running normally, not great, normally. and i just checked my mom's ipad, it's on the network too. my phone, a samsung galaxy s 4 had been connected since i had it, and decided to stop connecting when at least until i noticed i couldn't connect my new desktop and my gf's phone, an iphone 4 wouldn't connect either... in total, i think there's one wired desktop connection, my fail wireless desktop connection, wireless laptop that hasn't been opened in months, an at&t signal booster, an ipad, and 4 phones that connect when they feel up to it. my old iphone 4 i ran on 3g because it was more reliable than my wireless. there's never more than 3 devices running at once. i've seen a few threads mentioning too many devices on one network. could that be it? i hope not. we have comcast as a provider too, if that helps.
oh, and maybe i should describe my problem more clearly. on my phone, when i go to the wifi settings, it still list my network as one i'm linked too, it's just "not in range" and my new desktop can't see it at all. pretty sure it's not a hidden ssid because i connected my phone to it recently and had no probs. also, i'm fairly, but by no means 100%, certain that it's not the wireless card in the computer because i can see a few other networks and my phone had already been on it without giving me problems until earlier today.
if you know how to help, please be thorough in explaining it, and if i need to give more info, i'll try my damnest. please please please!!! help me, i spent all my money on this **bleep** computer and don't have anymore to buy another new router.

Hi there. To start, that blue button that you have been pressing on the router is the Wifi Protected Setup button. You press that button when you want to connect a new wireless device that supports Wifi-Protected Setup to connect to the wireless internet via your wireless router without having to enter anything on the new wireless device. So it means, you did not reset the router. I would like to verify with you though because it is not clear to me (sorry), how do you want your new desktop computer to work? Wirelessly or with Ethernet cable plugged-in? If it is for wireless, you will only need to connect the computer’s wireless connection to the router wireless network and to enter the wireless password if you have wireless security enabled on the router. Also, the router should be able to provide simultaneously internet connection to multiple devices – be it wired or wireless. Sometimes the reason why the wireless would not work is when there is wireless interference in the area that you will need to change its wireless channel to something else. To have wireless security enabled on the router is helpful as well in making sure that the router will provide a better connection speed.
You might find the articles below helpful:
Title: Troubleshooting iPhone® and iPod® wireless connectivity to a Linksys router Article ID: 22078
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=379d252f42cf4f14acff14214efc6f5a_Troubleshooting_i...
Title: Setting up wireless security on a Linksys router Article ID: 4024
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=ae7725e2224549b7ac82a8a00df3cdc7_4024.xml&pid=80&r...
Title: Top causes of dropping wireless connection on a Linksys router Article ID: 22110
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=efc03a44a5bb47bd804cf4d0eb3015c8_Top_Causes_of_Int...

Can I Use Airport Express for Airplay and a non-apple router with streaming capabilities on the same network?

I want to do the following things but can't find one device that fits all purpose.
Wi-Fi router that has USB port to share external hard disk wirelessly to all devices (Mac, Samsung Smart TV, PC, Ipad, Iphone) along with inbuilt torrent download capability that also has a 3.5mm jack to do airplay.
Greedy? Yes I know but why can't we have it all I ask.
Airport Express severs Wifi Router + Airplay purpose
Then there are other non-apple routers in market that satisfy my need to attach external hard disk and stream to the devices mentioned (Note: Timecapsule will not stream to my Smart TV)
So I am thinking why not connect both Airport Express and a second non-apple router and get best of both worlds.
Is it possible?
Thanks in advance.

I want to do the following things but can't find one device that fits all purpose.
Wi-Fi router that has USB port to share external hard disk wirelessly to all devices (Mac, Samsung Smart TV, PC, Ipad, Iphone) along with inbuilt torrent download capability that also has a 3.5mm jack to do airplay.
Greedy? Yes I know but why can't we have it all I ask.
Airport Express severs Wifi Router + Airplay purpose
Then there are other non-apple routers in market that satisfy my need to attach external hard disk and stream to the devices mentioned (Note: Timecapsule will not stream to my Smart TV)
So I am thinking why not connect both Airport Express and a second non-apple router and get best of both worlds.
Is it possible?
Thanks in advance.

I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list.

I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list. I've confirmed the mac address is included on that list and that the password is correct. Under choses netwrok I select the network and it just goes into a spin. I have tried removing the password and the access list settings and it still will not complete the connection to the router thus no internet access. The routers firmware is also up to date. This thing worked fine before this update and I've already tried to restore from backup. Any ideas or is the wifi nic bad in this thing with the new apple firmware update? Any fix?

Thanks Bob, I don't know why but it all of a sudden worked a few days later. It's a mystery but at least problem solved.

New Ipod Touch 5g can't access Internet in home network (using Linksys E4200 router). But, OK with other Wifi.

Just bought new Ipod Touch 5g. I found out it can't access Internet in home network. not really cannot access, but very slow to open any web page, App Store failed to access, etc. But, OK with other Wifi (office & starbucks). Others existing iOS devices (Iphone4 & Ipad2) have no problem like this. I'm using Linksys E4200 router at home. anyone has any idea why?

Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>GeneralReset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Why with my dlink router i can't recieve and send messages, why with my dlink router i can't recieve and send messages

Similar Messages

Maybe you are looking for