Why won't my airport express keep its connection?

Why won't my airport express keep its connection?

What is the AirPort Express not keeping a connection to? Another wireless router or your MacBook Pro?

Similar Messages

  • Why won't my airport express allow internet connection on TV blu ray? I have internet connection on iMac

    Why won't my Airport Express allow internet connection on my Blu Ray when there is internet connection on my IMac?

    I'm guessing you only have the modem/router supplied by your isp and the Airport Express.  Is the Airport Express connected to the modem/router with an ethernet cable?  If not, plug one end of the cable into an available port on the modem/router and the other end in to the WAN port, indicated with a dashed circle, on the Airport Express.
    Have a nice day.

  • Why won't my airport express generation 1 connect to anything any more?

    All I get is flashing green light which tells me it's trying to connect.  It's worked perfectly for years until this week.  Have Apple done some automatic updating which means it won't work any more?  As it won't initiate it won't, therefore, show on my computer so I can't 'talk' to it at all.

    I would recommend that you do the following as a minimum:
    Power-down the modem, AirPort base station, and computer(s).
    Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
    Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
    Power-up your computer(s).
    In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.
    If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
    Disconnect the AirPort base station from the Internet broadband modem.
    While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
    After the base station resets, go ahead and power it back down.
    Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
    Continue with step 2 in the first set of steps.

  • Why won't my airport express turn on after thunder storm ?

    Why won't my airport express turn on?

    There are three Airport resets, soft, hard and factory default.  It would probably be beneficial if you tried each one in sequence.  Actually, you could jump to the factory default reset if you don't mind reconfiguring from scratch.
    If none of the above helps, you may well have a harware problem.

  • Airport express keeps loosing connection to Time Capsule

    For several years I have had no issue with mt Airport Express staying connected to my Time Capsule/router. Now 2 of my Airport Expresses keep loosing the connection and flashing yellow. I have done the resets where I press in the little button on the bottom while plugging the AE back into the power source and reconnecting through Airport Utility and that will do the trick but after a short time the flashing yellow lights will go back on.
    Would it help to turn off the router, rest all the AEs? It is so frustrating to keep loosing the connection and nothing else has changed; e.g. the AEs are all in the same place. 

    Same thing here! I didnt have the problem with airport express until I update the os from 10.6.2 to 10.6.6. I have been calling the apple support and they couldnt help (or thou sounded like they knew for that particular problem). I got from my work MacBookPro and same thing happen. I hope that apple will read this and just want to tell them that this is my 10 computer made by apple and God knows the last one! First of all they made the the fireware with the bad chipsets so I have to but extra cards and then airport. I cant connect at all to any wifi and have to put the cables on the floor from the wifi router to the ethernet input which is more than 10 metres. Apple sort this asap!!!!!!!!!!

  • Why won't my airport express work with iPad and iPhone?

    I have my internet line coming into the basement. Its been hardwired from the basement modem to an airport extreme upstairs, but we sleep in the basement and the wifi is bad. I have a 1st gen airport express. So my idea was to put the extreme down with the modem, and run the hardwire to the express upstairs. I did this and my laptops and iMac got the same signal as when the extreme was upstairs, but my iPad mini and iPhone only have two bars unless you stand 5 feet from the express. Macs get about 48mbps, iDevices about 20mbps. 15 feet away on the porch the iPad won't even pick up the signal. The apple store advised I put the extreme back upstairs, and the express downstairs wirelessly. They said the iDevices may have been ignoring the express and trying to get the signal from the extreme in the basement.
    Is there any way to use the express and the extreme to get solid signals up and downstairs? My fear is apple once again boned me and wants me to buy a new express.

    If it's the original b/g only model its model number will be A1084 or A1088. It appears in the red box as shown below:
    To configure one of them requires an older version of AirPort Utility. Check its model number.
    It should not be necessary to connect it to your Mac with an Ethernet cable. Connect it directly to the Extreme, "hard reset" it again if necessary, then launch AirPort Utility.
    It should appear in your Mac's Wi-Fi menu as "New AirPort Express...". Select that and proceed to answer the questions.
    The AirPort Utility setup page with the words "using Ethernet" is as shown:
    Its appearance in AirPort Utility will show it connected to the Extreme with a solid (not dashed) line.

  • Why won't my airport express work with sky router

    Im not sure if its possible but i am trying to connect my Airport Express to my Sky (G) router so i have a better wifi signal in the bedroom the other side of my house, will sky routers not actually work with anything not supplied by Sky or is this rubbish? Any help would be great please?

    will sky routers not actually work with anything not supplied by Sky or is this rubbish?
    A Sky Support Forum could probably best answer that question.
    We can say that the AirPort Express can only "extend a wireless network" using wireless only provided that the "main" network is being produced by an Apple router. As far as we know, the Express is not compatible for this purpose with routers from other manufacturers.

  • Why won't my airport express work as a network extender since upgrading to iOS 6?

    I have the AirPort Extreme as my. Network and the airport express set up as my network extender. However, since I upgrade everything to IOS6 my airport express is no longer acting as the network extender. How can I fix this issue?

    I have an iMac, iPad, Apple TV and Panasonic tv on my network. The apple tech when I first bought the extreme 2 months ago had me set up the extreme as the main network and the. Airport express in a different part of my home as the extender to my network so we could use the wifi outside to my entertainment area and now to get wifi outside since upgrading my devices I can only get wifi outside if to stand next to the back door.

  • Why won't my airport express work with the latest iTunes, the airport shows green but there is no icon in iTunes any longer, what has gone wrong, desperate!!

    Airport Express used to work with iTunes v11 but now with v12 there is no sign of the little icon that used to appear over the volume button.  The Airport is finding the network, nothing has changed bar the version of iTunes, what should I do??

    A friend has helped me solve this problem, in my case it was nothing to do with Windows firewalls as some have suggested but it was simply a matter of resetting both the router and the Airport, the Airport is fairly obvious but not the router at least this was the first time I recall HAVING to reset it.

  • Why won't dose my FaceTime keep saying connection lost if I am connected to the interent

    Why dose my FaceTime keep saying connection lost if I am connected to the Internet?

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: FaceTime is 'Unable to verify email because it is in use'
    http://support.apple.com/kb/TS3510
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom

  • Why does my airport express keep cutting out?

    Why does my airport express keep cutting out?

    I have a 1st gen Airport Express and use it to stream music from my PC, iPhone 4, iPad and iPod Touch. My Airport Express is connected to a Teac UD-H01 DAC via an optical cable which is connected to an amp and speakers. I had no problems at all with this set up until I upgraded the Airport Express firmware to 7.6.3. The sound then started to drop out frequently. To cut a long story short after various testing, the problem had to be the Airport Express. I called Apple support but they were not much help and couldn't fix the problem and said they would speak to engineering and phone back. While I was waiting I decided to have another go to find the problem and opened the airport utility and saw that there was an option to downgrade the firmware. At this point I realised that the problems started about the same time that I upgraded the firmware to 7.6.3 but didn't think at the time that Apple would release a firmware that didn't work. Anyway I downgraded to 7.6.1 and hey presto, everything worked again. A couple of days ago I noticed that firmware 7.6.4 was available and thought I'd give it a go, not good - same problem as 7.6.3. I've downgraded to 7.6.1 again and all is well. Hope this helps.

  • Why have all 3 airport express base stations stopped working, BT have checked and improved line still not working?

    Why have all 3 airport express base stations stopped working, other users are on ipads and BT have checked and improved line but I still have an intermittent/no connection?

    You must tell us the whole setup.. what is the main router?? How are the express connected to each other?
    On ipad it works ok?? But you are on a computer?? MBP early 2011 running Lion?? That doesn't work.. even if you are right next to the main router??
    Plugged in by ethernet does it work??
    Have you installed a wireless diagnostic program.. ?? Actually Lion has one installed but hidden I believe.
    Later version bought it to the surface.
    About Wireless Diagnostics
    If you do run Lion please install the 5.6 airport utility as it will give you loads more info on how the units are connected.. and link speeds for extend wireless.
    How to load 5.6 into later Lion & ML
    1. Download 5.6 for Lion.
    http://support.apple.com/kb/DL1482
    Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
    Leave the package open on the desktop so you can see the file. AirportUtility56.pkg
    2. Download and install unpkg.
    http://www.timdoug.com/unpkg/
    Run unpkg on the desktop.. If your Mac refuses to run the software, because it wasn’t downloaded from the Apple store, go to security in preferences and allow other software to work.. this is limitation of trade methinks. You can set back later if you like.
    Now drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. in finder, open the new directory, drill down.. applications, utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
    You cannot uninstall version 6 (now 6.3 if you updated) so don't try.. and you cannot or should not run them both at the same time.. although I have had no problems when doing so.

  • Why can't my Airport express be found by the airport utility?

    Why can't my airport express be seen by the airport utility?

    I have the same problem. 
    I have a Mac Pro OSx10.7.5, a Netgear router, A 1st gen Airport Express Model A1264 set up in Bridge Mode w/ LAN cable as Network 2 for Airplay, the iPad palys music and connects to the internet great through it. I want to extend Network 2 to another set of speakers in another room so I bought another AE A1264. "Like new"
    So far I cannot get the computer to see the new AE at all. I have tried it wired to the router, wired to the Mac, wireless near the 1st AE, I've reset it and restarted multiple times. It just isn't showing up at all. ZIP. I get a slow blinking yellow light.
    The Airport Utility "Configure Another"comes up with a Mac address I haven't seen before. I don't know if it's the new AE or not. In any case none of the passwords including "     " for a password work. It spins and I get an error message that "An error occured while reading the configuration"
    Even when it was new the first AE took some doing to be seen by my Mac which was plenty annoying since it should just pop up but it did eventually connect via LAN. Once I configured it it worked on my network.
    These things have been a real pain. Please advise.

  • When trying to connect airport express keep getting unexpected error please try again.  IVE TRIED A HUNDRED TIMES AND HAVE FOUND SUPPORT PAGES UNHELPFUL

    when trying to connect airport express keep getting unexpected error please try again.  IVE TRIED A HUNDRED TIMES AND HAVE FOUND SUPPORT PAGES UNHELPFUL

    Have you tried using a WEP password for your wireless network instead of a WPA one? That fixed it for me.

  • Airport Expresse keep sending my error -5 when I try to set it up

    I am trying to set two air port express with my time capsule and one of the Airport Expresse keep sending my error -5 when I try to set it up. I have already tried to put it to his default setting and no result. Help!
    Pat

    You may get some help for this here, but this is the Time Machine (software) forum, and many of us don't know much about Airports.
    You might find better help faster if you browse, search, or re-post in the Time Capsule and Airport forums, hidden in the +Digital Life+ section, at: http://discussions.apple.com/category.jspa?categoryID=140

Maybe you are looking for

  • Quicktime 7.1.3 wont install, iTunes wont work.

    When ever I start iTunes,first of all it never opens up but a error comes up saying.... "QuickTime version 7.0d0 is installed, iTunes requires QuickTime Version 7.1.3 or later. Please Reinstall iTunes" So I reinstall iTunes, I have done this about 4

  • Safari doesn't work but other browsers do

    Hello everyone, Very recently safari has stopped working on my macbook pro. When I say safari isn't working I mean that the application is opening but no sites or webpages load. When I go to Chrome however everything loads without a problem. I am sur

  • Download data of f-53 & f-58

    Dear all, Can you let me know,how can we down load data after executing F-53 & F-58. In the download fiile ,we are looking for all the details like Vendor name,code,bank code,amount,etc do suggest

  • HT204380 My facetime isn't working.

    It starts conecting when i want to Facetime, but then it suddenly disconnects. I checked in my settings and it says waiting for activation, but it wont activate. Any advise?

  • Audigy 2 ZS - Bass redirection

    Hi! I just purchased the Medusa 5. headset but have read something about needing Bass redirection in order to get the bass working properly on them I'm running Vista SP with the Audigy 2 ZS with the web drivers from Creative. Obviously this function