Wierd noise when Using the XP partition

Hey guys,
When I'm using the XP partition I would also plug in another monitor while working. I would get this weird sound (like a robot) followed by pauses or short freezes when in the middle of my work. It doesn't happen all the time but only when i'm playing audio or scrubbing videos.
what do you think is happening? and what can i do to eliminate this?
thanks guys

it's like a chirping noise when scrubbing eg. youtube videos. could it be the video card problem? because of the multiple monitors?

Similar Messages

Clicking noise when using the 'mouse' button

I'm not sure what the button is called, but I'm sure ya know what I mean. I've had my macbook since August and this had just started happening. When I used the clicking button, it's harder to press, almost like there's something under it, and it makes a noise like it's getting stuck but then going down all the way. Anyone else have this issue or know what's causing it? Should I just get a mighty mouse?

Follow the instructions in this article released by Apple.
http://support.apple.com/kb/HT6545?viewlocale=en_US
Best.

Charger makes noise when using the touchpad

When I scroll (up-down-left-right) (2 or more fingers only) through the touchpad on my MacBook Air, while plugged-in to the charger, the charger makes a "scrolling" sound. It's so weird, not annoying, but weird.
Anyone had the same same thing?

it's like a chirping noise when scrubbing eg. youtube videos. could it be the video card problem? because of the multiple monitors?

Crackling noises when using Scarlett 2i2?

Just bought the Focusrite Scarlett 2i2 yesterday as my previous audio interface broke. Now I am having crackling noises when using the 2i2. . .a problem I did not have with my previous M-Audio Fast Track C400. . .so I know it's a problem specific to the 2i2. Already downloaded the latest drivers as well.
Anybody have any solutions or similar problems with this product??? The crackling noise is intolerable.
Thanks.

Hi lee, it sounds like the problem your having is exactly the same as mine. When I use the 2i2 there is clapping and crackling which gets worse and worse until the sound disappears, I know a few people on different forums are having the same issue so I don't think it is the interface. I'm using iMac 27
•      NVIDIA GeForce GTX 775M 2GB GDDR5
•      3.5GHz Quad-core Intel Core i7, Turbo Boost up to 3.9GHz
•      16GB 1600MHz DDR3 SDRAM - 2X8GB
•      1TB Serial ATA Drive @ 7200 rpm
There should be no problems with this set up in terms of capability, I'm still waiting to hear back from Focusrite tech help desk and when I do I'll share the outcome. I hope this can be resolved, let me know if you have any luck before me?
If I was in the UK I would pick up the phone and call Focusrite but I'm in Australia!!
Steve

HT5225 "This disc does not use the GUID Partition Table Scheme...". I keep getting this message when I try to install OSXLion. It has something to do with a repair Apple performed last year. I use a 17" MacBookPro. Any suggestions?

"This disc does not use the GUID Partition Table Scheme. Use Disc Utility to change the partition scheme". I keep getting this message when I try to install OSX Lion so that I can upgrade my 17" MacBookPro to move to iCloud. My harddrive was replaced last year by Apple because of a fault by the manufacturer and I think this is the cause of the problem. What can I do so that I don't lose my content.

When you click the partion tab. There is option on the bottom of the window. Click on that there there are these options.

Error Connecting to database URL jdbc:oracle:oci:@rmsdbtst as user rms13 java.lang.Exception:UnsatisfiedLinkError encountered when using the Oracle driver

Trying to Install RMS application 13.2.2 and I get past the pre-installation checks and when I get to the Data Source details and enter the data source details with the check box checked to validate the schema/Test Data Source I get the following error:
Error Connecting to database URL jdbc:oracle:oci:@rmsdbtst as user rms13 java.lang.Exception:UnsatisfiedLinkError encountered when using the Oracle driver. Please check that the library path is set up properly or switch to the JDBC thin client oracle/jdbc/driver/T2CConnection.getLibraryVersioNumber()
Checks performed:
RMS Application code location and directory contents:
[oracle@test-rms-app application]$ pwd
/binary_files/STAGING_DIR/rms/application
[oracle@test-rms-app application]$ ls -ltr
total 144
-rw-r--r-- 1 oracle oinstall   272 Dec 7 2010 version.properties
-rw-r--r-- 1 oracle oinstall   405 Jan 16 2011 expected-object-counts.properties
-rw-r--r-- 1 oracle oinstall   892 May 13 2011 ant.install.properties.sample
-rw-r--r-- 1 oracle oinstall 64004 Jun 6 2011 build.xml
drwxr-xr-x 9 oracle oinstall 4096 Jun 16 2011 rms13
drwxr-xr-x 3 oracle oinstall 4096 Jun 16 2011 installer-resources
drwxr-xr-x 3 oracle oinstall 4096 Jun 16 2011 antinstall
drwxr-xr-x 2 oracle oinstall 4096 Jun 16 2011 ant-ext
drwxr-xr-x 5 oracle oinstall 4096 Jun 16 2011 ant
-rw-r--r-- 1 oracle oinstall 11324 Dec 18 09:18 antinstall-config.xml.ORIG
-rwxr-xr-x 1 oracle oinstall 4249 Dec 18 10:01 install.sh
drwxr-xr-x 4 oracle oinstall 4096 Dec 18 10:06 common
-rw-r--r-- 1 oracle oinstall 16244 Dec 19 10:37 antinstall-config.xml
-rw-r--r-- 1 oracle oinstall   689 Dec 19 10:37 ant.install.log
[oracle@test-rms-app application]$
Application installation:
[oracle@test-rms-app application]$ ./install.sh
THIS IS the driver directory
Verified $ORACLE_SID.
Verified SQL*Plus exists.
Verified write permissions.
Verified formsweb.cfg read permissions.
Verified Registry.dat read permissions.
Verified Java version 1.4.2.x or greater. Java version - 1.6.0
Verified Tk2Motif.rgb settings.
Verified frmcmp_batch.sh status.
WARNING: Oracle Enterprise Linux not detected. Some components may not install properly.
Verified $DISPLAY - 172.16.129.82:0.0.
This installer will ask for your "My Oracle Support" credentials.
Preparing installer. This may take a few moments.
Your internet connection type is: NONE
Integrating My Oracle Support into the product installer workflow...
     [move] Moving 1 file to /binary_files/STAGING_DIR/rms/application
Installer preparation complete.
MW_HOME=/u01/app/oracle/Middleware/NewMiddleware1034
ORACLE_HOME=/u01/app/oracle/Middleware/NewMiddleware1034/as_1
ORACLE_INSTANCE=/u01/app/oracle/Middleware/NewMiddleware1034/asinst_1
DOMAIN_HOME=/u01/app/oracle/Middleware/NewMiddleware1034/user_projects/domains/rmsClassDomain
WLS_INSTANCE=WLS_FORMS
ORACLE_SID=rmsdbtst
JAVA_HOME=/u01/app/oracle/jrockit-jdk1.6.0_45-R28.2.7-4.1.0
Launching installer...
To make sure I have connectivity from the app server to the database (on a database server) here are the steps followed:
[oracle@test-rms-app application]$ tnsping rmsdbtst
TNS Ping Utility for Linux: Version 11.1.0.7.0 - Production on 19-DEC-2013 10:41:40
Copyright (c) 1997, 2008, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = test-rms-db.vonmaur.vmc)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SID = rmsdbtst)))
OK (0 msec)
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ sqlplus rms13@rmsdbtst
SQL*Plus: Release 11.1.0.7.0 - Production on Thu Dec 19 10:46:18 2013
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Enter password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ ping test-rms-db
PING test-rms-db.vonmaur.vmc (192.168.1.140) 56(84) bytes of data.
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=1 ttl=64 time=0.599 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=2 ttl=64 time=0.168 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=3 ttl=64 time=0.132 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=4 ttl=64 time=0.158 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=5 ttl=64 time=0.135 ms
--- test-rms-db.vonmaur.vmc ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4001ms
rtt min/avg/max/mdev = 0.132/0.238/0.599/0.181 ms
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ uname -a
Linux test-rms-app.vonmaur.vmc 2.6.18-128.el5 #1 SMP Wed Jan 21 08:45:05 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ cat /etc/*-release
Enterprise Linux Enterprise Linux Server release 5.3 (Carthage)
Red Hat Enterprise Linux Server release 5.3 (Tikanga)
[oracle@test-rms-app application]$
The database is created and all the batch file scripts have been successfully deployed. Now working on the application server. The Weblogic server is installed and 11g forms and reports are installed successfully.
Any help would be helpful.
Thanks,
Ram.

Please check MOS Notes:
FAQ: RWMS 13.2 Installation and Configuration (Doc ID 1307639.1)

This disk doesn't use the GUID Partition table scheme.

When I Install the Lion. It is stuck.
Lion This disk doesn’t use the GUID Partition table scheme.Use disk Utility to change the partition scheme.Select the disk,choose the Partition tab,select the Volume Scheme and then click Options.
The last step has problem.
I can not click Options.

In order to repartition the startup drive you will have to boot from your Snow Leopard DVD, select Utilities and then Disk Utility. YOU MUST ERASE YOUR DISK TO CHANGE THE PARTITION TABLE. The good news is that I see you have a Time Machine backup. Make sure that your backup is current before you erase your startup disk.
Even before doing this, save a copy of the Lion installer (it is in the Applications folder) onto an external device. Your external hard drive is a good spot; it won't interfere with your Time Machine backup. This will prevent you from having to download the installer again.
The easiest way to proceed after making sure your Time Machine backup is current, saving a copy of the Lion installer, and repartitioning your startup disk, is to reinstall Snow Leopard on your newly partitioned disk. This will take a little longer but it is simple and is fully supported by Apple. Once that is done and you are running Snow Leopard on your startup disk again, run the Lion installer from whereever you saved it, and then restore your files and settings from your Time Machine backup during the install process.
There is an unsupported procedure for making a bootable Lion DVD, but it is more complex and is not supported by Apple. If you are uncomfortable with any of this and have access to an Apple Store, make an appointment at the Genius Bar and they can help you through the process.

Noise when using isight in Movie 08

I have substantial noise when using iSight in iMovie '08. Please see my example on Youtube Mirno63 labeled test. I would like to have my daughter practice for a recital using isight but the noise is so loud. Please help!
Thanks
Marian

Hello, Marian (mirno)
If I am listening to the correct YouTube video, I think that at least some of the sound that is troubling you is background noise. Sookyas may also be right that feedback is causing your problem.
In either case, using an external Mic that is positioned closer to the voice you want to record than to your MBP should help you.
I use this Logitech USB Desktop Microphone when I want to get sound from a person who is not close to my Mac. My Logitech does a GREAT job on spoken words. Although it is not advertised as (and does not cost as much as) a music microphone, it gives better sound recordings than my laptop's built-in mic unless the voice being recorded is very close to my laptop. It certainly meets my singing and other amateur music needs. However, other brands should work, too.
Unless you can buy one from a trusted retailer who will give you full exchange or refund credit if a new microphone does not correct your problems, I suggest you take your wonderfully portable MBP with you when you shop, add any needed driver, and test the mic before you buy.
Here is how I would perform the test.
• Leave "AudioMide" settings at default. (You should not need to change these settings when using iMovie except in extraordinary circumstances.)
• Set your  > System Preferences > Sound > Input to use the new mic as your input device.
• Extend the microphone's cable away from your MBP, and start recording.
• Leave the computer where it is and physically move near the mic so your mouth is approximately half a meter from mic.
• Sing or speak in a normal voice for a few seconds and then stop the recording.
• Now change your System Sound Input preference back to user you MBP's built-in mic again.
• Start recording again.
• Leaving the MBP in place, move back to the same place where you tested the external mic.
• Sing or speak again at about the same volume you did when using the external mic.
• Stop the recording, and play back both recording so you can compare them.
This test should let you easily determine whether the external mic meets your needs.
If the noise is still there when recording from the external mic, there is most likely something wrong with your Mac. Contact Apple or your Apple-Authorized Service Provider.
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.2) External iSight

Noise when using headphones with new Lumia 630

I've got a new Lumia 630 today and when I tried to use headphones with it at first phone did not recognize them ( I still have to reconnect them sometimes) but the main problem is a hiss noise when phone produces sounds. It could be music, video or keyboard clicks, whatever. I can hear it even when loudness of music player is set to 0. Is it known issue? Or is it problem with my phone? I tried another headphones and have the same problem, maybe a less noise.
Sorry for my English. Need your help!

Hi wtfwithmyphone,
Welcome to the forum!
Does it only happen when using the phone with headsets? Do you also hear this noise when the audio is played via loudspeaker? What are the models of the headsets that you tried with your Nokia Lumia 630?
Note that the Nokia Lumia 630 supports headsets that have American Headset Jack (AHJ) ports. Using other types of headsets may cause performance issues, like background noise and audio quality distortion. This link will show you some of the headset models supported by the Lumia 630: Accessories for Lumia 630 - Headsets.
Let us know if this information has helped you.

How do I remove an old username from the app store when using the update function

How do I remove an old username from the app store when using the update function.
I purchased my Mac used. The former owners username prepopulates when I try to perform the updated function on the app store. It does not allow me to use a different user name. I have created my own username and password. I have even been able to purchase items from the app store, it's just when I use the update function it does populate with my username. Any help is appreciated.

The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.

Help Can't Install Maverick "disk doesn't use the GUID Partition-"

I have an imac and i'm using bootcamp fro windows 8. so I have Macintosh HD and BOOTCAMP Partitions. both partition have Master Boot Record as the Partition Scheme. When trying to install OS X Mavericks it rell me that "This disk doesn't use the GUID Partition Table scheme. ..." it tells me to use Disk Utility to select the disk ->partition -> select Volume Scheme and then Options... but option is grayed out... I can not change it and so can not install Mavericks... how do I solve the this issue without losing any data in mac and in windows? without deleting partitions if possible?
thanks

GUID is a drive map layout. You can only change it by opening Disk Utility, highlighting the physical drive and choosing the Partition tab. Then change the partition layout to anything other than Current. The Options button below that will then be active and you can then finally change the drive map from whatever it is now to GUID.
Note that since you must repartition the drive, you WILL lose everything on all partitions. So you MUST back up everything FIRST to another drive. This can be a clone to another physical drive, internal or external. When you clone it back after repartitioning, the drive map does not change.
To check your current drive layout, open Disk Utility and click on the physical drive you want to install Mavericks on. Example:
Then look at the lower right of Disk Utility's box. If you see anything other than GUID Partition Table, as shown below, then you must repartition the drive.
The other main problem is that you have to have another drive to boot to before you can change the one that needs to be repartitioned. Clone your current drive to another physical drive, not another partition on the same drive. Once the clone is complete, boot to that drive and you'll be able to repartition the drive you need to change.

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems n

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Adobe Photoshop CS4/5 Crashes when using the Move Tool

Hello. I'm here because I'm having an issue with Photoshop.
I was trying out CS5 when it started to crash every time I tried to use the Move Tool. It was the generic error message: "Adobe Photoshop CS4 has stopped working.
A problem has caused Adobe Photoshop CS4 to stop working correctly. Windows will close the program and notify you if a solution is available."
Thinking that it was a CS5 issue, I went back to my copy of CS4, only to find the same thing happening there (I also downgraded because CS5 was also crashing at other random times for some reason, but that's an issue for another time).
This puzzles me because both were working fine before. Granted, I hadn't opened them for a while, but it was a sudden thing.
My first impulse was to uninstall and reinstall CS4. No luck. So then, I uninstalled all third-party plugins, thinking that might be it. Still, the same problem. I started looking around on Google for solutions and found the instructions on resetting the Tool preferences (I chose to reset the preferences for ALL of the tools). When that didn't work, I tried deleting the preferences file outright, which said instructions recommended. Nothing.
I should note that Photoshop crashes when using the Move Tool to move an object without ant lines around it, i.e., a layer. I'll move the object, and after two to three seconds, the mentioned error message will appear and Windows will close Photoshop. This, however, only seems to happen after selecting, copying, and pasting part of a large object with some variation of the Marqee Tool (thus making that part a new layer by default) while working at a zoom of 100%. So, in short, working with a large image like <a href=http://www.wallpaper4me.com/images/wallpapers/ergo_proxy_267_1280-862301.jpeg>This</a> at 100% zoom. The image linked is the image that I was using and am currently using to reproduce the problem. It is 1280x1024 pixels. I have tested this with somewhat smaller, yet comparable images too. Same problem. I have never had this problem working with large images before, and I wonder if anyone has any suggestions short of formatting my hard drive.
The error code, from Event Viewer:
Faulting application name: Photoshop.exe, version: 11.0.2.0, time stamp: 0x4bf2d4f6
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x65637275
Faulting process id: 0xe28
Faulting application start time: 0x01cb2bb3471d87bf
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
Faulting module path: unknown
Report Id: b412e368-97ab-11df-8f49-001d60b646ef
Details:
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2010-07-25T05:15:57.000000000Z
EventRecordID
78845
Channel
Application
Computer
Gatherum
Security
EventData
Photoshop.exe
11.0.2.0
4bf2d4f6
unknown
0.0.0.0
00000000
c0000005
65637275
e28
01cb2bb3471d87bf
C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
unknown
b412e368-97ab-11df-8f49-001d60b646ef
Details in XML View:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-07-25T05:15:57.000000000Z" />
<EventRecordID>78845</EventRecordID>
<Channel>Application</Channel>
<Computer>Gatherum</Computer>
<Security />
</System>
- <EventData>
<Data>Photoshop.exe</Data>
<Data>11.0.2.0</Data>
<Data>4bf2d4f6</Data>
<Data>unknown</Data>
<Data>0.0.0.0</Data>
<Data>00000000</Data>
<Data>c0000005</Data>
<Data>65637275</Data>
<Data>e28</Data>
<Data>01cb2bb3471d87bf</Data>
<Data>C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe</Data>
<Data>unknown</Data>
<Data>b412e368-97ab-11df-8f49-001d60b646ef</Data>
</EventData>
</Event>
System Specifications:
Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7600)
System Manufacturer: HP-Pavilion
System Model: GN697AA-ABA a6214x
Processor: Intel Pentium Dual CPU E2160 @ 1.80 GHz (2 CPUs)
Memory: 2048MB RAM
DirectX Version: DirectX 11
Display Device:
Name: NVIDIA GeForce 8600 GTS
Manufacturer: NVIDIA
DAC Type: Integrated RAMDAC
Approx. Total Memory: 1010 MB
Current Display Mode: 1440 x 900 (32 bit) (60 Hz)
Photoshop Version: CS4 Extended 11.0.2

Even a decent RAM upgrade is usually only a few hundred dollars nowadays, but it's not a trivially simple process. That said, with a little research and care you can do it. Alternatively, you can hire people (e.g., "Geek Squad") to do such an upgrade.
First, you'll need to know what your operating system capacity is. For example, a 32 bit Windows system can really only use up to a bit more than 3 GB of RAM, while a 64 bit Windows system can use all the RAM you can find a place to plug in. What version of Windows are you running?
Then you'll need to determine what RAM you have installed and what your computer's maximum RAM capacity is - usually you can do this through internet research, either by visiting your computer manufacturer's web site or doing google searches. There are even RAM manufacturer web sites that will tell you what kind of RAM your computer needs and suggest sources, for example:
http://www.kingston.com/
It may be that you can just plug additional chips into currently empty sockets, or it is possible you'll need to replace the RAM chips you have installed in your computer to make room for an upgrade. Every computer is different.
If you list your computer model and current RAM that you have installed here, it may be that someone can help with more specific advice.
-Noel

When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue

When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue.

Hi Jdentremont,
Lync client gets user photos by first querying the Address Book Web Query (ABWQ) service on the server, which is exposed through the Distribution List Expansion web service. The client receives
the image file and then copies it to the user's cache to avoid downloading the image each time it needs to be displayed. The attribute values returned from the query are also stored in the cached Address Book Service entry for the user. The Address Book Service
deletes all cached images every 24 hours, which means that it can take up to 24 hours for new user images to be updated in the cache on the server.
To troubleshoot your problem, please follow the steps below:
1. Navigate to
“X:\share\1-WebServices-1\ABfiles\000000000\000000000” folder. (ABS file share)
You should see some photo files in this folder as the following screenshot.
2. Delete all the files in this folder.
3. On test PC, delete local cache files.
%userprofile%\AppData\Local\Microsoft\Office\15.0\Lync\[email protected]
4. Sign-in Lync with the test account.
5. Go back to the ABS file share, check if there is any Photo file in the folder.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I have been noticing that when using the computer the mouse keeps going in places where I really do not want and just now select the sentence without I have done anything. Sometimes goes to places like bookmark or open tabs in website when I am reading a

I have been noticing that when using the computer the mouse keeps going in places where I really do not want and just now select the sentence without I have done anything. Sometimes goes to places like bookmark or open tabs in website when I am reading a page.
Also I have noticed opened windows that I have not opened.
I have verified the sharing folder and also the remote access but it not let me turn it off.
Also I have add a password to my computer and even using the same one it looks like is not working.
The I photo stopped working, Mac Mail does not let me add rules (this is from one day to the other)
The computer is mine, the internet I use is payed by me with a password. I did not give permission to anyone to use my computer or share my files.
In system preferences in the sharing folder is showing everyone and staff.
My computer is private I do not own a company and I do not have a network set up in my house.
I had my photos removed from my computer and even after trying to reinstall I photo and fix the Mac Mail is not working.
I am receiving emails saying that I have sent emails to people that I do not know and including in a time where I am working and not using the computer.
Any suggestions in how to fix this issue?
I really appreciate.

With the multitude of issues you have I would take it to an Apple store or AASP and have them sort it out. Then I would sign up for Apple camp or one on one.

Wierd noise when Using the XP partition

Similar Messages

Maybe you are looking for