Wifi bar issue with brand new iPhone 4S

My wifi bar was greyed out, and I just had to get a new iPhone 4s to solve the problem. That was today, and the issue has already returned after I updated from 7.0.1 to 7.1. Help?

Restore iPhone with iTunes on computer. If still problem after the Restore take it to Apple. Replacement iPhone still has Warranty. Make Genius reservation or set up service and take or send to Apple for resolution.

Similar Messages

  • With brand new iphone 4s when plugging into computer itunes shows a blank page with an apple logo in top left and a small lock in the top right. right clicking iphone under devices shows only eject.

    with brand new iphone 4s when plugging into computer itunes shows a blank page with an apple logo in top left and a small lock in the top right. right clicking iphone under devices shows only eject.

    Having same issue here:
    https://discussions.apple.com/message/19043181#19043181

  • I've got a death grip issue withe my new iphone 4s 16GB.

    I've got a death grip issue withe my new iphone 4s 16GB. When I touch lower left corner of the device signal goes down and NO SERVIS pops up. When I do not touch this part of device everything is fine.
    I am from Slovakia.
    I have unlocked device and using T-mobil / Telekom carrier.
    Please help me slove this problem. Thank you for any advice / response.

    get a case.  That's the solution.  Simple.

  • Is anyone having volume issues with the new Iphone 4S?

    Is anyone having volume issues with the new Iphone 4S?

    Yes, the volume on my iPhone 4s will max out without me touching any button or setting.  When opening mail, for instance, the ringer icon will appear and the volume level goes to max volume - and I'm not touching the volume buttons.  It seems to happen randomly, at least I can't identify a pattern, but thankfully it doesn't happen all the time, but at least once a day.  
    Anyone else seen this?

  • Problems with brand new iPhone

    Good morning - I was hoping someone could assist me with the following problems I'm having with my new iPhone (purchased last night). The software is version 2.1 (most up-to-date).
    I'm having the following problems:
    1. Unable to rearrange apps - if I hold down the home key, nothing happens. I've held it for 30 seconds and still nothing. I've powered down/powered up the iphone and tried again to no avail. Any suggestions?
    2. I am unable to "reset" my iphone by holding down the sleep/wake button. The phone will go to the red slider bar to power down, but if I keep holding the sleep/wake I never get the "apple" and a reset of the phone.
    3. If I go to my contacts list and click on a name, there is no "call" button?
    4. How do I turn off the keystroke sound in text messaging (and keep the ringer at full)?
    Any assistance would be great. Thanks all.
    MS

    1. Don't hold the Home button. Hold down on the app itself. All the apps should start wiggling after a few seconds. Once they start wiggling, you can rearrange and delete the apps (except you can't delete the ones that come with the phone). Once you are done rearranging, hit the Home button to stop them from wiggling.
    3. When you click on a name, you should see that person's phone number(s). Click on a phone number and the phone will dial that number.
    4. Settings --> Sounds --> At the very bottom of the list is keyboard clicks. Turn it off.

  • Calendar issue with the new iphone 6 plus

    I'm wondering if anyone is experiencing a problem with the default iphone calendar for iphone 6 plus?  I have consulted with apple's tech specialist both in store and online and they can't seem to figure out what's wrong.   They have apparently forwarded the issue to the engineers.  As everyone may know, dots appear under the date if you have added an event to the specific calendar date then the elaboration of the specific event appears on the bottom linear view.  What i have been experiencing on my iphone 6 plus is that the dots disappear as i scroll further and further down to future months and when i do scroll back up the dots also randomly disappears with past months/events.  The elaborated event in the linear view is still there, however, when u highlight the date.  Why is that? We've already rebooted my phone, checked all possible settings issue, unsync then resynced it to icloud, resigned to icloud, reset all settings and even changed to a new phone (thinking it was a hardware defect) but the dots were still disappearing even with the new device.  I even turned off icloud on all my devices and just used the usb cord to sync it from imac to iphone! This nightmare is still happening even without icloud! However, it doesn't do that to my iphone 5! All dots with corresponding events appear on all weeks/months on my iphone 5 calendar.
    Hopefully, someone is experiencing the same issue with their default calendar on the new iphone 6 plus.    I tried my best to describe the issue, so i hope this made sense.  

    M glad I'm not the only one experiencing this!  Because when i spoke to apple techs it sounded like mine was an isolated case as they have not heard any complaints about this! I'll post something on this thread once apple techs have figured it out and get back to me! They initially put my icloud account on troubleshooting mode so they can look into it, however, it wasn't an icloud issue....so, they have yet to firgure it out!  I have already sent them screenshots of what my calendar was doing to my phone.

  • Serious Issues with brand new iPad 3

    Ok so I was given a brand new iPad 3 as a gift on Sunday.  And since then my life has been stressful!!
    Email: When I click on the email icon up comes a message saying Unable to Move Message, referring to one of the first emails I tried to delete. So, no email program then.
    Music: My windows media files of literally hundreds of ripped CD's will not copy across. The system is not interested and the computer hangs after a few seconds. So no music program then.
    Documents: I don't know how to get literally a decades worth of MS Word docs onto my iPad. The Doc app I downloaded has no instruction page, so I don't even know how to underline a heading (it's called Goodreader). So no document program.
    Calendar: When I tried to sync my outlook calendar instead of syncing it, it wiped it clean and dumped the appointments onto the iPad. This means with no appointments now on Outlook, it has synced with Google Calendar and wiped Google calendar clean and in turn wiped my blackberry clean of a year's worth of appointments. I am royally and truly stuffed now.
    I have run out of patience with this and I really, really need help!!

    Complete guide to using iOS 6
    http://howto.cnet.com/ios-6-complete-guide/
    You can download a complete iOS 5 iPad User Guide (Apple has not yet published an iOS 6 Users Guide for the iPad) here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
    Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
    Apple - iPad - Guided Tours
    http://www.apple.com/ipad/videos/
    Apple iPad Guided Tours - Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
    http://www.youtube.com/watch?v=YT2bD0-OqBM
    http://www.youtube.com/watch?v=ROY4tLyNlsg&feature=relmfu
    http://www.youtube.com/watch?v=QSPXXhmwYf4&feature=relmfu
    How to - Articles & User Guides & Tutorials
    http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
    iPad How-Tos  http://ipod.about.com/lr/ipad_how-tos/903396/1/
    You can download this guide to your iPad.
    iPad User Guide for iOS 5
    http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
     Cheers, Tom

  • Problems with brand new IPhone's charging?!

    Hi, I recently got the iphone5s, it is now only 2 months old! However I have recently been having some problems charging it, when I use the cable it seems really temperamental and will only charge depending on what angle the lead is at. I assumed it was the charger and so tired another and have also been using it with a portable charger. Both seemed fine at first but then these problems occurred again. When trying to connect it to my computer it becomes recognized and un-recognized very easily and I have to plug/un-plug the cable a few times (after turning it round) until I can get it to work. Sometimes it will work fine but then other times I think it has gone completely. Can you advice me on what may be causing these problems and whether I need to get a brand new lead or it is a fault with the charging port on my phone? Very frustrating please help!
    P.S Didn't want to take it into the apple store as it very temperamental and could work for them and make me look very silly!

    Would you rather risk looking silly or having an expensive iPhone that doesn't work?  Let them examine it.

  • Performance issue with brand new intel iMac extreme

    I am at a loss to explain a problem I've been having and I thought I might put it out to you guys.
    In September I purchased a macbook Pro (2.4 ghz, 4 GB RAM) to use in video editing with Final Cut Pro, and for the most part I've been thrilled. I use 1TB LaCie external drives connected via FW800, and perform Multiclip editing with 4-5 video streams at a time and only on occasion have dropped frames during the editing process.
    In December I determined that I needed to have an additional system, and thought a 2.8Ghz Intel iMac extreme would be an excellent choice, since for the same price I could get a little more power in the processor, more hard drive space and a bigger screen to work on. When we picked up the new system in the store (The Grove Apple Store in LA), we had them upgrade the memory to 4GB.
    Since day one we have had performance issues, including problems playing streaming and DVD video, severe delays mounting and unmounting drives (firewire and USB) and application images, and freezing while doing even simple tasks like printing or checking email. These problems occur even while there are no external drives are connected. I have none of these issues with the Macbook Pro, which has virtually an identical set of programs installed, and both running the same version of Leopard.
    I already took the original iMac back to the store, and they exchanged it, but did not have 4GB sets of RAM in stock so they took the RAM from the original machine and put it in the new one. They said if I continued to have problems then it was most likely the RAM and I should come back when they got more in stock. I DID have the same problems with the new machine, and took it back to the Apple Store and they swapped the memory. It seemed to improve the issue, but now I'm seeing the same severe performance issues again.
    All tech support can do is tell me to do a PRAM reset, which seems to improve things very temporarily (but that may be my imagination) or have me restart, which at least has the ability to make the printing of documents capable.
    What I'm wondering is if it is likely that the RAM is the issue and I just got another bad batch, or if the iMac has some weird glitch that isn't present in the macbook Pro...?? Or could I have possibly gotten 2 bad systems in a row? It's extremely frustrating, and I KNOW it shouldn't be this way! It's so bad I get better performance out of my single-core G5 tower! How do I get a good working system that operates like it should? Am I better off getting another Macbook Pro? I'd rather not for several reasons...
    I have xbench on both the MBP and the iMac and can provide test numbers if they'll help, as well as any other info.
    Thank you so much for reading my novella of a post and also for any insight you have!
    Best,
    Travis

    Hi!
    I got the same problem with my MacBook when it still was new in may 2006. It was supposed to be one of the faster Laptops around but it was soooo slow it drove me nuts. I can only advise to have a look if there is something hugging up your RAM and run some tests using these programs on your machine:
    Xbench:
    http://www.macupdate.com/info.php/id/10081
    MenuMeters:
    http://www.macupdate.com/info.php/id/10451
    If they show any unusual results you might have your problem...
    As to my problem with the MacBook: I did a complete re-install (writing the harddisk over with zeroes) and suddenly everything was just fine. (But be sure to back all your files before that, I learned this one the hard way.) I know it is just a standard answer, but it worked out for me this time...
    Hope this helps in some ways.
    Cheers,
    Rene

  • Anyone having issues with their new iPhone 5?

    I've had my iPhone 5 for a month (64GB in white from 3 network). My fella has the same but in black but he's not been having any problems.
    I've noticed the reception drops randomly, I've noticed it most when it's been in my pocket. I have to reset it using Airplane Mode to re-fresh.
    Also it sometimes crashes on me, stays frozen for 2-5 minutes. Never had this problem with my old iPhones!
    And litrally just ten minutes ago I tried making some calls, first time call I heard was what sounded like interferance, then the second and third call no one could hear me speaking.
    Another thing I've noticed is that sometimes it doesn't like being connected to my home WiFi. We have BT Infinity and the computers run very quickly of it, however the phone seems to struggle.
    Wondering whether these are common symtoms??
    Regards El x

    I think you must restore your iPhone without keeping backup! One suggestion: save your address book and your favourite apps with iCloud! And if you cannot do without, recover only this data.

  • Issue with brand new iPod Nano 7g No Phone, can't contact Apple

    Hi everyone,
    I just got my brand new iPod Nano the other day, when I opened it up and took the sticker off, I saw a large scratch down the screen. That was annoying enough but the scratch affects the touchscreen ability and it's very tough to ignore.
    So like a normal person I want to contact Apple to try and resolve this, but I've hit another barrier. I only have one phone, a mobile and that's bust up. No way I can take or recieve calls unless I become psychic as the speaker and mic are broken. So i'm wondering if there's any other way I can contact Apple?
    My nearest Apple store is about a 2 hour drive away as I live in the middle of nowhere, helpfully...
    Totally new to this place so any help is appreciated.
    Thanks

    So i'm wondering if there's any other way I can contact Apple?
    Either borrow a cell or a landline phone.  I find it hard to believe no one in your neighborhood, family, school or job have no phone.
    My nearest Apple store is about a 2 hour drive away as I live in the middle of nowhere,
    They are not the only places to go - AASP's Outside of the USA
    How to find your nearest Apple Authorized Service Provider (AASP)

  • I'm experiencing wifi issues with my new iphone 5 not being able to connect to, or when connected not dowloading from my wifi network at home using ios 6.0.2

    i purchased a new d-link dir-655 wireless n extreme router to strengthen my signal at home and cannot connect from the opposite end of the house from where the router is.  When I'm near the router i can connect and download with no problem.  When I move 10-20 ft from the router I can connect, but not download.  More than that, I can't connect.  What fristrates me is my old iphone 3gs is able to connect and download perfectly from anywhere in the house!!??  Do i need to replace the iphone?

    I have the same problem, it's better trade my iPhone, or the apple it's gonna fix at the next upgrade? Please, someone help me, I try everything.

  • Issue with brand new blackberry

    hello guys
    iv just bought a new blackberry from my local phone shop and stupidly said to the guy i would be able to set it up as im a techy guy (usually fixing every one else's problems) and being a iphone user, mac, windows and android i assumed the blackberry would be as easy..... but i was wrong it seems
    so a little back ground,    im on the 3 network, with "all you can eat" data as my tinternet (which coveres my blackberry, bbm ect)
    i cant set up my blackberry pin or ID or anything on the device (therefore the blackberry world dosent work nore anything else)  it keeps telling me the phones not connected to the network (when it clearly is if i can view the bbc or any other random website i choose) i can install apps through the browser though
    this is on wifi,  on the phone network it dosent even go that far
    the error when trying to sign into blackberry ID - unable to connnect with blackberry id. please sign in now (stupid question as i cant???)or try again later. data services are required for blackberry id and can be turned on in the mobile network settings
    any ideas at all?
    thanks guys
    Gaz

    Hi and Welcome to the Community!
    Start by getting your voice services (calls, voice mail, SMS) working...without those, nothing else will matter. Make 100% sure that those are working via the carrier network (turn off WiFi to be sure) before you proceed -- bypass any prompts or anything else it requests concerning data (e.g., skip over the BB ID login). If they are not working, then ring up the provider for assistance.
    After voice services are working, then with a strong carrier network signal (again, not WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
    1) Register HRT
    KB00510 How to register a BlackBerry smartphone with the wireless network
    Please wait for one "registration" message to arrive to your Messages app
    2) Delete and Resend Service Books (pre-BB10 devices only)
    KB05000Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphone
    If you have no CMIME entry, then skip the deletion
    KB02830 Send the service books for the BlackBerry Internet Service
    Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
    3) Reboot
    Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
    BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. IF this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
    See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Hopefully that will get things going again for you! If not, then you should contact your mobile service provider for formal support.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Serious issues with brand new T440p

    Hello everypone,
    I recently was supplied with a T440p for work. The laptop has some serious issues that neither I nor my colleague from IT could solve. So before we send it back I would like to try the forum because I really can't wait another couple of weeks for a new machine (I desperately need it for work).
    The laptop works fine when it is in the docking station, but I can't use it in battery mode. It crashes/restarts after a couple of minutes. Sometimes I don't even get to the log in screen. It will take me to this white-text-on-black-screen page where I can choose if I want to run Windows (7 Professional) in safe mode or normally. This crash/restart issue does not persist in safe mode, but I can't really work in safe mode.
    Another issue is that the laptop sometimes takes a very long time to restart or to shut down. It just shows the empty desktop without all the shortcuts and the task bar for some time and then finally logs off after give or take five minutes. After that, the restarting works fine. But it's really annoying.
    Another thing was that the laptop could not wake up properly from sleep or hibernation mode. It would crash/restart every time (like described above). I kind of solved the problem by telling the laptop to never go to sleep or hibernation mode. After ten minutes there would just be a screen saver now.
    I am convinced that all this is not caused by conflicting software. I only installed very few programs yet (mostly office programs and Skype). Naturally all the Windows Updates (and Lenovo Updates) have been installed so far, too.
    Here is what I did so far:
    - Ran all tests (extended version) in the Lenovo solution center, all good, no warnings whatsoever
    - Ran all BIOS tests, same here
    - Googled for T440p issues and found out about the problems with the driver for the finger print reader, so I installed the latest version of it, did not solve the problems
    - Installed a BIOS update (from the Lenovo page), did not solve the problems
    So I don't have any idea on how to solve this. I know my way around computers, but I am definitely no IT guy, so I hope you can suggest some things I have not tried yet. I rather would fix this Laptop than waiting for a new one...
    Cheers and thanks in advance
    Tim

    Not much to do beside submitting support / warranty claim. I guess systemboard will be replaced.
    Edit: OTH I have heard certain windows update may cause issues, so maybe try to revert to restore point before updates and check if issue remains ...
    Disclaimer: While I do work for Lenovo Partner, all my contributions are my personal, non-official and not that of Lenovo or my employer.

  • Banding issue with brand new MG7550 in Win 8.1

    Hi there,
    I'm running some test prints on a new Pixma MG7550, but I'm getting a consistent vertical banding on landscape photo prints (i.e. horizontal bands on portrait prints).  It's really noticable on gradients, but is there regardless of colour.  It looks like a slightly darker line every 8mm or so. 
    Here are the details:
    Pixma MG7550 (Firmware 2.020)
    Windows 8.1 Pro 64 bit (Auto update enabled and up to date)
    Printer installed on network via ethernet (no other connection)
    Canon inkjet printer driver 2.80
    Stock (included) cartridges installed
    Printing from Windows photo viewer
    A4 HP glossy photo paper (landscape mode)
    For what it's worth, I was very careful in the setup process and followed all the instructions to the letter.  
    The print tests look fine, no missing content or obvious errors.  The printed image looks just like the reference one.
    I've run nozzle checks, head alignments and the clean utility.  
    I haven't run a deep clean as I understand that this is only necessary when you are sure it is a cleaning problem and I really don't know.  
    I've updated the printer firmware, but the problem is exactly the same, before and after.
    I suspect it may be a Windows 8.1 issue, but only because the Canon site refers to a similar-sounding problem in Windows Vista (where it suggests upgrading to Service Pack 2).  
    If anyone can offer any ideas, I would really appreciate it.
    Thanks! 
    Solved!
    Go to Solution.

    Glad it worked out.
    I have a Pixma Pro-100 with XPS driver, so my experience is based on that, but I believe they all work the same. As far as the XPS driver is concerned, when you install the XPS driver the computer sees two printers - an MG7550 and an MG7550XPS. If you don't make the XPS printer your default printer in Windows, or specifically choose the XPS printer from the Print menu of your application, then the XPS driver isn't being used.
    There is also a lot of Internet discussion over whether or not Windows has a 16-bit printing process.
    I have experimented with both. 1. I have not seen a photo printing quality difference visually with XPS over non-XPS. 2. Using the XPS driver hasn't created any negatives that I have seen.  So, I use the XPS version just in case there are some subtle benefits I don't see.
    But, if you want XPS then you need to be sure to select it.
    The print head sticking option moves the head further from the paper; usually selected for heavier weight paper. I don't know anything about the HP paper you are using, and don't know if there a re negatives with selecting it for lighter weight paper, but since you made two changes I would suggest you uncheck that option and print from PS just to see if there is a difference.
    John Hoffman
    Conway, NH
    1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

Maybe you are looking for