Will an Epson stylus BX635 FWD printer work with OS 10.6.8 on a mini

I want to use an Epson Stylus BX635FWD all in one printer on my Mac Mini OS 10.6.8 are there any problems with drivers?

Have you looked here?

Similar Messages

Will the HP LaserJet Pro P1102w Printer work with OSX 10.9.5?

I am looking for an affordable LaserJet printer for home. I want to know if the HP LaserJet Pro P1102w will work with OSX 10.9.5. Their website only goes up to OSX 10.7 for compatible OSX systems.

OS X- Printer and scanner software available for download

Epson Stylus Photo 1280 not working with OS X 10.4.3

I recently updated to Tiger OS 10.4.3 and my Epson Stylus Photo 1280 no longer prints. I've attempted to delete and add it to the Printer List, but get the following error - "An error occurred while trying to add the selected printer." Along with that it reads "successful-ok-too-many-events."
As well as this, (sorry, possibly off topic) I can no longer download files via Safari, consistantly getting the error "mounting failed." This also occurs when I try to use Software Update as well. I get the message, "Unexpected error occured."
Any help would be greatly appreciated!
667 MHz PowerPC G4 Mac OS X (10.4.3)

The last Gutenprint release was in July 2012 as version 5.2.9. Therefore, it has not been compiled or tested especially for Mavericks.
Suggest you reset/remove the Epson printer entry in System Preferences > Printers & Scanners. Then re-add it. Leave your printer power on and connected to the Mac. Perform a software update, this may also offer the Epson Printer Drivers v2.15.1 for OS X (released Sept 11, 2013). This download supports your printer model.
Read this brief Apple article.
How to get the previously mentioned Epson Printer Drivers from Apple, if they weren't available through software update.

Will Canon's PIXMA iP5000 Photo Printer work with Mavericks 10.9.5?

Canon's PIXMA iP500 Photo Printer is not listed in the printers supported by OS X Maverick. Does this mean a user has to opt for another printer, or is there a way of getting around this issue?

Finally received a reply from Dymo support. It's self-explanatory:
Good Morning Dana,
My name is Jesse and I will be happy to assist you today. I apologize for the delay in our response. A systems upgrade and technical issues prevented us from doing so until now. Yes, the 450 Twin Turbo will continue to work after updating to Mac 10.9.5, and our developers are making sure they will work with Mac 10.10 when it is released.
The Twin Turbo (the dual bay printer that just says ”Twin Turbo” on the front without a preceding number) requires a component included with Mac 10.9.3 and earlier that Apple has taken out of 10.9.4 and all subsequent releases, rendering the printer not able to be used. All other 400 series printers, as well as the 450 series printers work with Mac 10.9.4 and up. Our developers are working on the issue to see if a workaround can be implemented. I'm sorry for any inconvenience this may cause.
If you should need further assistance, please do not hesitate to respond to this e-mail or contact tech support by phone at 1-877-724-8324.
Kind regards,
Jesse L.
DYMO Consumer Technical Support

Will an Epson TM-T88III thermal printer work on a Mac?

What are the chances (I haven't got it yet) of getting an Epson TM-T88III thermal receipt printer to work on a Mac (OS X 10.7.5)? It doesn't have a USB connection. And I can't see any Mac drivers available for it. Its connection is Serial RS-232 (possibly also Ethernet). No USB. I think you can get cable converters from serial to USB. But my concern is software.
I'm not going to be using the printer as a receipt printer in a POS situation. So I'm not fussed about proper receipt software. I just want to be able to print on it (ideally from something like Photoshop, full pixel control).
It seems Epson TM-T88V which has USB is fine with a Mac -- there's Mac drivers -- but they're much more expensive. Be great if I can get the III instead. But if it's not going to work on a Mac obviously there's not much point. Has anyone got a III to work on a Mac? Might it be possible?
Thanks.
(What on earth has Apple done to this text input on this forum? It doesn't work very well -- not normal, horrible behaviour. You have to click several times to move the cursor, selecting text is a bit messed up. Not fun.)
Extra Q: Is there a general printing specific forum on here rather than one that's under/associated with particular versions of OS X?

Have you looked here?

Epson artison 810 wireless printing works with internet explorer, but not mozilla

New printer. I can print web pages with internet explorer, but when I use mozilla nothing happens.

See this: <br />
[http://kb.mozillazine.org/Problems_printing_web_pages]

Photoshop CS6 on a Mac using an Epson Stylus PRO 3800 printer.

Installed Photoshop CS6 on a Mac Version 10.9.4. Installed an Epson Stylus PRO 3800 printer. When I try to print through Photoshop the dialogue box won't give the option to color manage. I followed the link suggested in the print dialogue box but that was for CS5 and said it will only work with TIFF files. I work with .psd files. I downloaded it but my Mac will not let me open it. Any help would be most appreciated. Mary Ellen

From Chris Cox: If you choose "Photoshop manages color", then Photoshop is managing the color and the printer driver is supposed to disable it's color controls (and let Photoshop manage the color).
If Photoshop is managing the color, then there is nothing else for the printer driver to do - so it grays out it's own color controls because they don't apply while Photoshop is managing the color.

Epson Stylus r360 issues printing in Leopard via Airport Extreme & Bonjour

I hope I am not duplicating any posts, have searched but have not found a similar problem.
I have an Epson Stylus Photo R360 printer connected to my Airport extreme via USB sharing the resource around the house via Bonjour to all my Mac's.
Problem is it works fine under Tiger but the 2 Mac's that have been upgraded to Leopard 10.5 no longer print. It discovers the printer and loads in the printer configuration window ok, drivers are found and the printer looks good to go.
However, when you try and print, after about a minute an error appears on the printer in Leopard with an exclamation mark and is unable to continue.
If you hook up the printer directly to any Mac running leopard, it works fine!
Anyone else having this problem? Is this something Apple has changed in Bonjour or maybe printer drivers problem via Bonjour?
Any help or advice would be greatly appreciated.
Thanks
G

I found a fix for the problem of not being able to print from a printer connected to an Airport Extreme.
I had similar issues with my Canon iP4200, which was connected to an Airport Extreme. Printing worked fine with Tiger, but Leopard has somehow corrupted the feature. Printing is now very sporadic, at best - and will stop a few seconds into the printing and hang. My solution was to hook the printer directly up to the main (host computer). Go into System Preferences > Sharing, and make sure you've selected 'printer sharing'. Then go into the Sys Pref for "Printing/Fax", and remove your current printer (which was accessed via Bonjour on your Extreme) - you can leave it if you like, just make sure that when you add the new one, that you make it the default. Once set, make sure that you check the box labeled 'Share this Printer'. You will also now notice that the printer's location has changed to your host computer's name. You will now be able to print from your main computer without a hitch. Now access the System Pref>Printer/Fax from any other wired or wireless computer on your network. Add a new printer, a new choice will appear on your list, which will list the printer name with the "@" symbol, followed by your host computer's name. Select that, and let it do it's auto driver check, then click 'add'.
You will now be able to print from any of your computer's on the network. Best of luck.

Epson Stylus Photo R1800 now working

I'm posting this because I found help here and hope this will be useful. When I switched to Leopard on my Mac Pro, my R1800 printer stopped working. First it printed everything in a washed out draft mode. Then, even after doing what was suggested in this forum, I still couldn't get back t my original dialogue box, which seemed to be the only way to activate the gloss optimizer for real photo quality.
This is how I got back to a fully functioning printer (Note: don't skip any steps, like I did initially).
1. Open up the print and fax dialogue box in system preferences. Highlight the Epson printer and click on the "minus box" to delete that printer driver.
2. Restart your computer (very important)
3. Go to the Epson Website (http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid= 14121&infoType=Downloads) and download Epson EasyPrint v3.1bA and Printer Driver v3.0aAs.
4. Install both downloads.
5. Open up the print and fax dialogue box again. If the Epson R1800 shows up again, highlight it and click on the minus sign to delete it again. Then click on the "plus" sign and add the R1800 back.
6. Look for the menu that says "Print Using." Make sure to select Epson SP R1800 (1) and not the Gutenprint option.
7. Close the dialogue box and you should be good to go.
This procedure returned my original (pre-Leopard) set of options to the R1800 and, once again, I'm getting nice prints.
Note: I do have to access that menu in a new way from Photoshop
a. make sure the triangle next to Epson Stylus Photo R1800 in the print dialogue box is pointing up to reveal the expanded menu selection.
b. under the popup menu where "layout" is listed, select "Print Settings" and you should se the menu you are used to for the R1800.
I hope this helps.

Kent,
The problem here is that the original poster is using an Intel-based Mac (Mac Pro). The driver he is referring to ONLY supports Intel-based Macs (Printer Driver v3.0aAs). So, not to put too fine a point on it, but the post should have been entitled "Epson Stylus Photo R1800 Now Working for Intel-Mac - Others SOL" (grin).
Apparently Epson doesn't think many of us have computers more than a couple years old - and that they shouldn't have to support them.
The printing problem is one that has been well documented and the lack of drivers apparently only affects those "ancient" PowerPC models, not the Intel-Macs.
So, the only current solution that I have found to date is:
1. Replace your decrepid computer with a new Intel-Mac (about $7k in my case)
2. Replace your Epson printer (I hear that the HP B9180 printers are working) and hope the new one works with your ancient PowerPC.
3. Hope that Epson gets around to writing a driver for us before our photo business go belly-up.
Full Disclosure:
Somewhat tongue-in-cheek, but still extremely frustrated.
Message was edited by: Gilbert Blankenship1
null

Cannot get epson stylus office tx610fw printer to print now that Ive updated to osx mountain lion, have had no success getting my mac laptop to update latest apple update for epson printer

cannot get epson stylus office tx610fw printer to print now that Ive updated to osx mountain lion, have had no success getting my mac laptop to update latest apple update for epson printer

John Blanchard1
Re: can't print to Epson TX610FW
Jul 28, 2012 10:23 AM (in response to normdrexel)
Try installing the Epson drivers from here:
http://support.apple.com/kb/DL1398
and then seeing if adding and printing with USB works.
This site really works and my computer is now printing.

Problem printing from cs6 photoshop to epson stylus pro 4800 printer

Has anyone had trouble printing from cs6 on a mac running lion to a epson stylus pro 4800 printer? I keep getting an error message saying "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents."" The computer sees the printer just fine and has the latest driver installed. I have removed it and reinstalled it many times . I need help with this.

Yes, the menu items are not unavailable. We were already aware of the "Reveal Arrow" issue under OSX v10.5.3. The most important print menu items such as "Print Settings" and "Color Management" are simply not present. As previously stated we've already tried uninstalling and reinstalling the latest (v3.66) "Universal" print driver on both hosts and all of our client Macs. A resolution to this problem is very urgent as our semester begins this week and currently students can not print their next week assignments.

How to setup wifi Epson stylus SX 435W printer and scanner on macbook pro with mavericks

how to setup wifi on Epson stylus SX 435W printer and scanner on macbook pro with mavericks..that is printer works recognise comptuer but when it comes to scan error shows as comunication error occured
please help

mukhi23 wrote:
how to setup wifi on Epson stylus SX 435W printer and scanner on macbook pro with mavericks..that is printer works recognise comptuer but when it comes to scan error shows as comunication error occured
please help
Read the user manual that came w/the printer/scanner, contact Epson to see if you need to update your scanner drivers to work in Mavericks also check Software Update. Check out the following links:
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system
A scanner driver you may wish to consider: VueScan Scanner Software

I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan

Hi Everybody,
I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan. How do I uninstall the Epson software and start all over again?
nickel_man_65

Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd

Will a CP1518ni color laser printer work with airprint with my iPad?

will a CP1518ni color laser printer work with airprint with my iPad?

Hi Ijergen,
Yes you can use AirPrint as long as the printer is on the same network as the iPad.
You can also try Google cloud, I will be giving you links below on how to go about it.
AirPrint
http://www.apple.com/support/ipad/assistant/airprint/
Cloud print
http://androidadvices.com/how-to-print-from-androi?d-phone-with-google-cloud-print/
http://www.google.com/support/cloudprint/
Thanks
Josh.C
Click on the BLUE KUDOS button on the left to say "Thanks"
Although I am an HP employee, I am speaking for myself and not for HP.

How can I connect the ipad2 to an Epson Stylus SX445W wifi printer?

How can I connect the ipad2 to an Epson Stylus SX445W wifi printer?
Any help appreciated. Obviously I'm not technically minded so simple... Sorry... Very simple instructions would be great. Thanks

Does the iPad come up with a "no AirPrint printers found" message? If so, the most common fault is that the printer isn't on the same WiFi network as the iPad. Your printer may also need a firmware update. Epson has some support information here that may be of help:
http://support.epson.net/airprint/fw.html
Regards.

Will an Epson stylus BX635 FWD printer work with OS 10.6.8 on a mini

Similar Messages

Maybe you are looking for