Will BootCamp Split my Hard drive?

I only need windows to run quickbooks, I don't want to have my hard drive split for mac and pc. I don't want to have to use any antivirus software.
When I run my quickbooks I will not need to run any mac software at the same time.
Will Boot Camp be the correct thing for me to use? I know I would have to get windows software as well. Or is windows parellel the one to use?
In Canada they do not have quickbooks software for the Mac as they do in the US.

Quick Books Premier Contractor, I-MAC 2.66 Quad w/8G RAM, Snow Leopard, Fusion-3, and WIN-7.
2 processors allocated to WIN-7 with 3G RAM.
ISSUE- QB runs terrible. It takes up to 9 minutes to boot QB and it repeatedly is “Searching List”, “Preparing for Editing”, “Record Transaction”, and “Locking Transaction”. Each can take minutes.
When tabbing between fields when entering a ITEM, I have to wait when I tab to next field.
Printing can take minutes to come up.
This is a new machine and the MAC side works very well. The WIN-7 side seems to work fine too, just not in QB.
I-MAC is on network via Time Capsule and another PC on WIN-7. Again, a new machine.
QB for MAC will not network, even #10. Will share a file, but not allow network to access the file at same time.
I have read that QB works good in Paralells???? and for sure in Boot Camp.???
Any suggestions?

Similar Messages

System Profiler will not recognize installed hard drive if drive is in use by VMWare

System Information will not recognize installed Hard Drive (Boot Camp) when in use by VMWare.
I work in IT for a School District and I am creating a Script that system information about the computer. I am testing this on a Mac Pro with two internal hard drives. One drive is Mac OS 10.8 and the other drive is a Boot Camp Drive that is used by VMWare Fusion.
When I run System Information via the GUI or system_profiler via Terminal, both drives show up just fine. However, if I launch VMWare Fusion and run Windows from my Boot Camp drive, then run System Information via the GUI or system_profiler via Terminal, the Boot Camp Drive is no longer listed as an installed drive.
Example:
In the Terminal, I enter the following command.
system_profiler SPStorageDataType
Then it returns this information.
Storage:
    Lion Client:
      Available: 217.84 GB (217,836,306,432 bytes)
      Capacity: 639.28 GB (639,275,270,144 bytes)
      Mount Point: /
      File System: Journaled HFS+
      Writable: Yes
      Ignore Ownership: No
      BSD Name: disk0s2
      Volume UUID: CCB501BF-AF24-30E7-A938-5A4E52DF14D7
      Physical Drive:
          Media Name: WDC WD6400AAKS-41H2B0 Media
          Medium Type: Rotational
          Protocol: SATA
          Internal: Yes
          Partition Map Type: GPT (GUID Partition Table)
          S.M.A.R.T. Status: Verified
    BOOTCAMP:
      Available: 255.58 GB (255,575,560,192 bytes)
      Capacity: 319.79 GB (319,790,510,080 bytes)
      Mount Point: /Volumes/BOOTCAMP
      File System: NTFS
      Writable: No
      Ignore Ownership: Yes
      BSD Name: disk1s2
      Volume UUID: D4B39D4E-E244-403C-AE4D-4D58397130DE
      Physical Drive:
          Media Name: WDC WD6400AAKS-41H2B0 Media
          Medium Type: Rotational
          Protocol: SATA
          Internal: Yes
          Partition Map Type: GPT (GUID Partition Table)
          S.M.A.R.T. Status: Verified
Then I launch VMWare, which uses the Boot Camp drive. The once again run the same command from the Terminal Command and I get this.
Storage:
    Lion Client:
      Available: 213.39 GB (213,392,244,736 bytes)
      Capacity: 639.28 GB (639,275,270,144 bytes)
      Mount Point: /
      File System: Journaled HFS+
      Writable: Yes
      Ignore Ownership: No
      BSD Name: disk0s2
      Volume UUID: CCB501BF-AF24-30E7-A938-5A4E52DF14D7
      Physical Drive:
          Media Name: WDC WD6400AAKS-41H2B0 Media
          Medium Type: Rotational
          Protocol: SATA
          Internal: Yes
          Partition Map Type: GPT (GUID Partition Table)
          S.M.A.R.T. Status: Verified
The Boot Camp Drive is no longer listed.
I assume this is due to the the fact that the drive is "In Use" however is seems odd since the Mac drive is also in use and it appears without problem. I assume there is no "fix" for this, I was just wondering if someone may have an explaination why?
Also, I do realize that I can query the various interface types like system_profiler SPSerialATADataType to get all the properly installed phycial drives, but then I would have to query all possible interface types, isolate only devices containing Volumes, then consoldate the information to just the information that I need. I was hoping for a cleaner query.

Thank you for your response.
VMWare may be the cause, but the actual issue I am having is with Apple's System Information. I anticipated resistance from VMWare if I went to them with a question about an Apple software issue (even though VMWare software is part of the equation). I was trying to avoid the inevitable finger pointing game. I thought I would try with Apple Forums first since the issues presents itself within the Apple Software. However, you are correct that VMWare may have an explanation on why Fusion might be interfering with System Information. I will check with them next.
To answer your question. Yes, In most cases I do use Fusion to run Windows side-by-side with the Mac OS. However, that is not always the case. There are a few reasons why I have it setup using a Dual Boot configuration.
One, in some cases, due to the intense programs I occasionally run (graphic applications), I prefer to simply boot straight into Windows via Boot Camp so I may allocate all hardware resources to Windows. Additionally, some graphic applications like to have direct access to hardware and the extra layer of the VM environment can cause problems when an application is trying to directly access specific hardware like a graphics card.
Second, I often use either side, both Mac and PC, for testing. There is an advantage to not having to rely on the Mac OS to run Windows. If, for whatever reason, my Mac becomes unstable due to testing, I can still jump right into Windows to do work if necessary.
Third, I love the Mac OS, but I work in a PC centric organization. If there is a "problem" with my system, it is too easy for other system admins to say, "it's because it's a Mac". Having the definitive separation of the OS's allows me to prove that the Mac OS is not a factor.

Currently have 30K pics on PC Win. 7 laptop using PSE 8, corrected issues and did full backup on portable hard drive plus saved (Extensive) Keyword tags to file. Installed PSE 13 on PC Win 8.1 laptop. Will attach same portable Hard drive to new laptop.

Currently have 30K pics on PC Win. 7 laptop using PSE 8, corrected issues and did full backup on portable hard drive plus saved (Extensive) Keyword tags to file. Installed PSE 13 on PC Win 8.1 laptop. Will attach same portable Hard drive to new laptop. How do I import prev Keyword Tags from file and Restore catalog from port. HD to new PC and in what order? I have not opened PSE 13 on new PC yet. Would like to do it right the first time!

No importing needed.
See these instructions: Use Backup, Restore to move catalog | Organizer | Elements 6 or later

I have iMovie 09. I just erased my external hard drive, but it is still formatted for the mac. However, iMovie will not recognize the hard drive. It shows the only hard drive available is the computers. How do I get the external hard drive to show up?

I have iMovie 09. I just erased my external hard drive, but it is still formatted for the mac. However, iMovie will not recognize the hard drive. It shows the only hard drive available is the computers. How do I get the external hard drive to show up?

In Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
If it does contain data...
http://support.apple.com/kb/TS2474

Photoshop Elements 12 will not let me save files edited on a usb flash drive, but will photos on the hard drive all other apts will on the flash drive

Photoshop Elements 12 will not let me save files edited on a usb flash drive, but will photos on the hard drive all other apts will on the flash drive

Thanks for the information and your help. I have never bothered before changing the format. Next time I will.
I copied the library to the external drive and then it went and said they were referenced files but I was okay about that. Now it cannot see them and will not do anything with them. I think I will buy another external drive and start again by importing all of my files again. I guess 55K will keep the mac busy this week.

Will this Solid State Hard Drive Fit in a Desktop Computer?

Will this Solid State Hard Drive Fit in a Desktop Computer?
http://www.newegg.com/Product/Product.a … 6820208315
Any info is greatly appreciated; thanks!

I think you'll need two adapters as well. One to mount a 2.5" drive in a 3.5" bay, and one to convert the smaller 2.5" IDE connector to the bigger type found in desktop PCs and a separate power plug.
Here's two examples. I'm not recommending either of these products, they're just the first ones I found!
http://www.newegg.com/Product/Product.a … 6812116211
http://www.newegg.com/Product/Product.a … 6817984006

TS1440 Will it erase my hard drive, photos and music?

Hi all! I'm happy to follow above procedure. Seems easy enough. But will it erase my hard drive, photos and music? I don't use iCloud... Thanks all!

You haven't updated Leopard to 10.5.8?
If you want to upgrade further:
Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
Whilst Apple have withdrawn Snow Leopard from their stores, you can still get it from Apple by calling 1-800-MY-APPLE (if you are in the USA) and they will supply the SL DVD for $20 for a single user, or $30 for a family pack that covers up to 5 Macs. You can also purchase the code to use to download Lion from the same number (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
http://www.apple.com/osx/specs/
If you are outside the US call your national Apple Helpline:
http://support.apple.com/kb/HE57
If you're in the UK, use this number: 0871 508 4400
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard.
To use iCloud you have to upgrade all the way to Mountain Lion:
http://support.apple.com/kb/HT4759

HP dv7 will not recognize second hard drive

My HP dv7 2185dx running Windows 7 will not recognize second hard drive, bios recognizes it, Intel Rapid storage recognizes it.
Primary hard drive is a 1TB, in install a second 500GB hard drive.
This question was solved.
View Solution.

Hi,
Hold down the Windows Key and press R. Into the Run Box type compmgmt.msc and hit enter. Click Disk Management in the left pane and let the drives load up.
Does the 2nd HDD show here?
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Losing the will - Bay 2 1TB Hard Drive can't install Vista AT ALL!

I have a new Mac Pro and installed a Samsung Spinpoint F1 1TB hard drive in bay 2, solely for a Vista install (for editing AVCHD in Sony Vegas) but I cannot under any circumstances, install Vista on any partition, be it the full, halved, any combination at all - you name it, I can't install.
I get as far as the partition screen in Vista and his is where things slip up - I have had the Boot Camp partition (only on a split, never on the single partition) and it just will not let me install. Not under any circumstance.
This is appalling, I have been onto Apple who have escelated it to one of their engineers, he did not have a clue. Way to go.
So, I was wondering if anybody had any ideas or has experienced this?
BTW, I have not tried to install to the OS hard drive yet - don't really want to mess with it.
TIA

There are a number of things you can do, but in every case, you have to delete any FAT partition, create NTFS before you can install. In some cases, a restart from Vista DVD is required before it proceeds.
In one instance, I had to remove the OS X drive, but that may be why some jump to wrong conclusion about drive bays making a difference - they don't.
You got it installed so you must have been at least somewhat successful.
I use Disk Utility to create and format the drive 99% of the time. If you are going to dedicate a drive to Vista, even multiple FAT/NTFS partitions, I would set the partition table (Partition: Options.... in Disk Utility) to Master Boot Record rather than GUID.
Let Windows do all the updates through multiple reboots before you insert the Leopard DVD to add Apple setup.exe services often called "BootCamp drivers."
BootCamp Assistant is unnecessary and I don't think well designed even yet for use on Mac Pro UNLESS you need to install Windows on the same drive as OS X, such as you find on iMac/MacBook series.
Vista DVDs are now available with SP1 already, which is what I would buy today if I was buying Vista.
say "had" because a couple of days down the line when I tried to boot into Vista, I was met with a black screen and flashing cursor.
Any hardware changes? installed drivers?
When you say you looked far and wide... I have been active here and on Mac Pro discussion and Vista issue.
There are also some good threads on MacRumors:
http://forums.macrumors.com/forumdisplay.php?f=1

Will using an external hard drive cause me to have duplicate files on my itunes library?

I put all my ITUNES MEDIA folder on my external hard drive from my older computer.. I recently bought a new computer and installed Itunes. I synced some of my Itunes purchased songs back on by using my Ipod.. however the songs I ripped from my cds are still not reinstalled in my library.. I will have to use my external hard drive or re rip those.. and there are a lot of them.. since I have already replaced some of the ones I purchased back on using my Ipod will it duplicate them if I use the prefrences method and return them all from my external hard drive? If i delete my files that I have already returned on my new computer before using my external will Itunes remember which are Itunes purchased music and which arent as well>??? also how exactly do you move music from an external? just plug it in and click the prefrences box about syncing files and keeping Itunes library organized?? any other thing to click?

An iTunes library consists of both the media and the database that knows which files are in the library and hold details of ratings, playcounts, playlist membership and other details not stored in each file's metadata.
Depending on how you have moved content to your external drive you may find you are only moved the media, but not the database. If you import this media into a new library it will work, but your library will be seen as "new" with respect to any devices that you have and iTunes will want to erase and reload them, losing you current selections, settings and data on the device.
These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
If you have an iOS device that syncs with contact & calendar data on your computer you should migrate this information too. If that isn't possible create a dummy entry of each type in your new profile and iTunes should offer to merge the existing data from the device into the computer, otherwise the danger is that it will wipe the information from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable. Alternatively you could copy over the iTunes folder and make sure your external drive has the same drive letter on the new system as the old, however moving the library into a portable form will make every subsequent move that much easier.
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
tt2

Using Bootcamp with 2 hard drives in MBP

I'm going to install a second hard drive in my laptop. Here is what I have and what I'd like to have...
My current setup:
750 GB hard drive
Partition 1- Everything Mac related
Partition 2- Windows 7/BOOTCAMP
The setup I'd like:
60 GB SSD- Mac OS, Mac Applications
750 GB hard drive
Partition 1- Everything else Mac related
Partition 2- Windows 7/BOOTCAMP
Can this be done? If bootcamp is already installed on a partition on the 750 GB hard drive, can I just pop the new SSD in, install Mac OS X, and use the previous Mac partition from my larger drive (partition 1) for Mac files? Or will I need to reinstall Windows 7 to get it to work properly with the newly installed Mac OS X?
Thanks a lot for the help!
-Grant

About TM "Backup Drive is Full"
TM only deletes older files if they have been deleted from the source and when TM needs space on the backup drive for a new incremental backup. Time Machine "thins" it's backups; hourly backups over 24 hours old, except the first of the day; those "daily" backups over 30 days old, except the first of the week. The weeklies are kept as long as there's room.
So, how long a backup file remains depends on how long it was on your Mac before being deleted, assuming you do at least one backup per day. If it was there for at least 24 hours, it will be kept for at least a month. If it was there for at least a week, it will be kept as long as there's room.
Note, that on a Time Capsule the sparsebundle grows in size as needed, but doesn't shrink. Thus, from the user's view of the TC it appears that no space has been freed, although there may be space in the sparsebundle.
Once TM has found it cannot free up enough space for a new backup it reports the disk is full. You can either erase the backup drive and start your backups anew or replace the drive with a larger drive.
Having a sufficiently large enough backup drive doesn't prevent this problem but it can help provide a longer period of time before the problem occurs.
If this is something of concern for you then you should opt to use a different type of backup utility and a different backup strategy.
Backup Software Recommendations
Carbon Copy Cloner
Data Backup
Deja Vu
SuperDuper!
Synk Pro
Tri-Backup
Others may be found at VersionTracker or MacUpdate.
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files.

Un-split the hard drive and re-download Mountain Lion on my second laptop

I have two partitions on the hard drive of my MacBook Air; one has Snow Leopard (Mac OS X, 10.6.8) and the other has Mountain Lion (Mac OS X, 10.8.3). As I start saving more files on my MBA, I start having less free space to work with. When I purchased the Mountain Lion, I didn't purchase the CD version; I downloaded from Apple's site. Now I need to un-split my MacBook Air, keeping the Snow Leopard on it and move the Mountain Lion to my MacBook Pro. How do I do that? Any suggestions? Thanks!

download Mountain Lion again from the App Store - once the download is complete, it will try to install - cancel the install and create a Mountain Lion USB installer.
http://lifehacker.com/5928780/how-to-burn-os-x-mountain-lion-to-a-dvd-or-usb-fla sh-drive
You do realize that you can also download Mountain Lion in your Macbook Pro through App Store. It should be under your purchases section when you open App Store.

How do I split my hard drive on my macbook pro to add windows7 proffessional

Where do I find info on how to split/partition my hard drive on my macbook pro so I can add windows7 pro. ?
my wife is taking an intro to computers course and needs to be able to access windows programs.

Hi,
the BootCamp support site http://www.apple.com/support/bootcamp/ and the BootCamp Installation Guide to be found there.
Read the Guide carefully and make sure to have/make a backup of your OSX before starting.
Regards
Stefan

Splitting the hard drive? Retrieving files

I am a brand new Mac owner formerly a Windows XP user. Prior to buying my MAC, my p/c crashed. I used carbonite to backup my files while I was using Windows. Now Carbonite tells me they cant "cross platform" my files and send them to me on my Mac.
Being new to all this, can anyone pls advise on what is the best way to get my files back? Should I use some kind of an external storage unit ? And use a friends p/c --who has Windows to receive the files? OR I understand I can "split"(?) the hard drive on my Mac and load microsoft on my MAC ? Is that correct? If I load Windows on here too, would I then have to run Anti Virus software for the Windows side of the unit? I would appreciate any advise anyone can give me about this.
Tks in advance.

I can "split"(?) the hard drive on my Mac and load microsoft on my MAC ? Is that correct?
Yes: http://www.apple.com/bootcamp
If I load Windows on here too, would I then have to run Anti Virus software for the Windows side of the unit?
Yep
Should I use some kind of an external storage unit ? And use a friends p/c --who has Windows to receive the files?
If you don't want to go through the hassle of installing Windows on our Mac, using an external hard drive would be your best option.

Imac will not see my hard drive on start up, wants to start from network start up disk that does not exist. How to get rid of it? So there is just one choice / my hard drive.

I have a Intel duo Imac. Everything has been running relatively smoothly for a few years now. All of a sudden my computer will not start. I get the flashing folder with a question mark.
When I go to Start up disk in my system perfernces while the computer is on. I see 2 possible choices. One is my hard drive with the operating system shown. The other is a non-existant Network Start up disk with a question mark in it ( looks like a hard drive with a question mark and it say's its a "network start up disk).
All I think I want to do is get rid of the Network startup with the question mark. I can not find anywhere how one can just remove an old or non existant start up disk without reformatting.
I believe this came from a clients hard drive who had a network system on it. We no longer have that drive. It no longer exists. But a latent icon shows up in start up disk.
When I go to change the start up disk. I can change it to either the hard drive or the network with the question mark. But when I select my hard drive and then got to restart the computer. I get the flashing folder with a question mark on start up. I have also seen the flashing globe a couple times.
When I attempt to run disk utility from may install disk ( holding down "C" on start-up ). Disk utility does not see my hard drive. Just the Apple install disk with the disk utility on it.
What can I do to remedy this short of re-installing? Will a program like Disk Warrior or Tech Tool help?

Thank you. That's what I thought will need to happen.
One more question. I tried using the Apple install disk that came with the computer. It's an OS 10.5.6 disk. It does not see my 10.6.8 system internal hard drive to repair. All it see's is itself 10.5.6 disk. Do you think I can use a 10.8+ disk utillity since that is a higher system it will see the 10.6.8. Where the 10.5.6 does not?
I don't want to turn the computer off for fear I'll get the question mark again. P-Ram got me going last time but for how long I don't know? It would be nice to be able to turn the computer off for the night and startup as usual to give it a rest and try to reset itself.
Thanks for your help, I know I will eventually need to re-install. But I am in the middle of a project with tight deadlines and all I can do right now is back-up. Trying to migrate to another computer temporarily to finish the job. That's a lot of extra work in the short time also.
Just trying to put a band-aid on it for another couple weeks.

Will BootCamp Split my Hard drive?

Similar Messages

Maybe you are looking for