Will Final Cut Express be improved by upgrading from Mountain Lion to Mavericks?

Will the performance of Final Cut Express, currently running under Mountain Lion OS X 10.8.5 (12F45), be improved by upgrading to Mavericks?

Ian R. Brown wrote:
. . . . but you will need to have Mavericks installed to use FCP X.
Should you feel the urge to give it a try, this website has a free 2 hour course of video tutorials that will get you off to a flying start.
http://www.izzyvideo.com/final-cut-pro-x-tutorial/
There are some 26 "bite-size" lessons so it's not too daunting.
Quite right Ian.
Probably should have mentioned it.
Al

Similar Messages

I have upgraded from Mountain Lion to Mavericks, since then my Adobe Flash Player don't want to work?

Hi, can anybody help me please, i have upgraded from Mountain Lion to Mavericks, since then my Adobe flash player don't want to work.
I clicked on update and downloaded the update from Adobe and installed it.
Every time i get an error saying - "that this wasn't downloaded from App Store".
i can not find it in App Store.
What must i do?

Try this: in your Utilities folder launch Adobe Flash Player Install Manager and run it to completely uninstall Flash. Then go to http://get.adobe.com/flashplayer/ and download Flash
Once downloaded, double-click to open it and run the installer. If you get a message saying the file can't be opened, or similar, Control+click or right click and select 'open' and should then be able to proceed to install it.

I just upgraded from Mountain Lion to Maverick (10.9.3) and Adobe CC is listed as incompatible with this OS. What do I need to do to make it work again?

I just upgraded from Mountain Lion to Maverick (10.9.3) and Adobe CC is listed as incompatible with this OS. What do I need to do to make it work again? Just a patch/update or do I need to uninstall and install?

antoniobesteban wrote:
I just upgraded from Mountain Lion to Maverick (10.9.3) and Adobe CC is listed as incompatible with this OS.
Where are you seeing that information? Got a link?
According to the Adobe website: Mac OS X Mavericks (10.9) compatibility FAQs | CC, CS6, Acrobat
Plenty of people, including me, are currently running CC on Mavericks.

Error when upgrading from Mountain Lion to Mavericks

Has this happened to anyone and what did you do to resolve it? Error: "install failed - The OS X upgrade couldn't be started because the disk Macintosh HD is damaged and can't be repaired. After your computer restarts, back up your data, erase your disk, and try installing again."

OK,
I did the following (I did not purchase DiskWarrior or any other 3rd Party software)
Backed up to an Time Machine Drive
Reset the EPROM (zapped it or whatever they kids these days are calling it)
Booted off a Mavericks USB stick.
Ran Repair Disk & Repair Permissions
Installed Mavericks
Worked fine, took a while but up and running.
Not sure what the HD damage error was but it's working away on my old work horse (17" Late 2007 MacBook Pro).
Eoin
<Apologies for post the same response in two place but I had made a comment here and was following another thread, Good Luck!)

Upgrading from Mountain lion

I am upgrading from Mountain Lion to Mavericks. I tried to install Mavericks from the AppStore, everything went OK (download, etc), until the system had to reboot and it was when everything failed. The system couldn't start, it stalled when the apple logo appeared, but the mouse was resposive (really weird). I tried several things cleaning the PRAM, etc, and there was no booting, or alternative to start the system. After trying all the different combinations to boot and see no change, I realised that the left option key somehow was unresposive at startup, and that was one of the identified problems. However, I manage to use the right option key and I was be able to boot from an external hardrive using a recovery partition from a clone of my system. I restored the system with my back-up from Time Machine of 10.8.5. I have a mid 2010 MacBook Pro, where I have a SSD drive. My drive is OK and It was checked prior to installation of the system etc. Any Ideas on how to able to install 10.9, or an expected release date of a new installer? It seems this has been happening to a lot of people.

OK,
I did the following (I did not purchase DiskWarrior or any other 3rd Party software)
Backed up to an Time Machine Drive
Reset the EPROM (zapped it or whatever they kids these days are calling it)
Booted off a Mavericks USB stick.
Ran Repair Disk & Repair Permissions
Installed Mavericks
Worked fine, took a while but up and running.
Not sure what the HD damage error was but it's working away on my old work horse (17" Late 2007 MacBook Pro).
Eoin
<Apologies for post the same response in two place but I had made a comment here and was following another thread, Good Luck!)

Final Cut Express 2 on a Upgraded B&W powermac

Will Final Cut Express 2 work on a B&W powermac upgraded to a G4 650 MHZ machine with a ATI Radeon 9200 128MB DDR PCI Video Card installed?
Thank you

Dennis
Here's the Apple specs:
http://www.apple.com/finalcutexpress/specs.html
Al

Will final cut express work with os maverick

I am running mountain lion and FCE. will final cut express work with mavericks.?

A follow-up to my previous post. FCE 4.0.1 is working fine with Mavericks on the computer at my church (we use it to video-tape sermons and masses for YouTube).
A few weeks ago, I purchased a copy of FCE 4.0 from Amazon (one of only two left). It would NOT work with Mavericks, and there was no upgrade available on the App Store (the only source of software upgrades with Mavericks). So, I installed FCE on another iMac running Lion. It installed just fine, and when I went to "Check for New Software" in "the apple", it found the upgrade to 4.0.1, installed it, I copied it to a blank DVD, and installed that on my iMac running Mavericks. It is working fine. (HINT TO APPLE: Can we please go back to the simple "Check for Software Updates" instead of the App Store? Ever since Steve Jobs died everything Apple has become more complicated, not intuitively simple as he made it.)

Will Final Cut Express 2.0.3 work with Tiger 10.4.4

Will Final Cut Express 2.0.3 work with Tiger 10.4.4

We have it running on our iMac G5s. Although it runs reasonably well, there are some teething problems with it. One of them is we cannot capture from a camcorder using timecodes because it just crashes when we try and do that, so we can only capture using the "DV Convertor" mode. Not unreasonable, but slightly annoying.
We also have the problem that, when we brought some new iMac G5s recently with the iSight built in, it wouldn't work at all because it didn't seem to realise that a PCI-Express graphics card was actually a graphics card at all, and it kept demanding we install an AGP one, which was a bit stupid.
Apart from that, it's definitely useable. No crashes or anything like that. And we use it daily.

Will Final Cut Express help with...

I am considering purchasing Final Cut Express for a video project I am working on for my company. I have been using iMovie for a while and have not found a way to overlay a graphic (in this case, our company logo) on top of video. Will Final Cut Express allow me to do this?
Also, I just shot some video of clients giving testimonials that I would like to turn into marketing pieces. Unfortunately there is a lot of background noise in several of the clips. Does Final Cut Express have any audio tuning features that will help me reduce or remove the background noise?
Any guidance would be greatly appreciated!

Will Final Cut Express allow me to do this?
Yes, easily.
Does Final Cut Express have any audio tuning features that will help me reduce or remove the background noise?
Not really. You could try using a noise reduction tool like SoundSaop, but you're best bet is to re-shoot using proper mics and placement.
-DH

Will final cut express work with a sony DCR-SR40

I got a sony DCR-SR40 camcorder for christmas an imovie won't work with it - will final cut express do the job?

First of all, welcome to the forum.
That camcorder uses a USB interface, correct? FCP and
iMovie can only import via FW. For hard drive
camcorders, you must import the footage like you
would files from an external HD. Then you can work
with the files in FCP or iMovie.
Good luck and happy New Year.
This Camera supports Mpeg -2 files I have had no end of problems importing this into I movie. Bought the software recomended by Sony (Capty MPEG ..whatever) cost £65 and is rubbish, so bought the Quicktime MPEG 2 codec plugin for £15, got the picture not the sound. What plug in do I need for the Audio, or should I ditch the camera and go for a Firewire version.

Will Final Cut Express work on a Macbook Core Duo

I have a 2006 Macbook 2ghz Core Duo with 2gig of Ram. Will Final Cut Express work on this? Will the integrated graphics card affect performance?

hey there 12frets,
FCE should run w/out major probs. you should even be able to run a 2nd display up to 23", which would be very handy as the Canvass(playback) window will be rather small on a 13" display.
FCE System Requirements
A Mac computer with a 1.25GHz or faster PowerPC G4, PowerPC G5, Intel Core Duo, Intel Core 2 Duo, or Intel Xeon processor
For AVCHD: A Mac computer with an Intel processor
1GB of RAM or more
An AGP or PCI Express graphics card compatible with Quartz Extreme; or an Intel GMA integrated graphics processor in a MacBook or Mac mini computer
Some FxPlug filters are not compatible with integrated Intel graphics processors.
A display with 1024-by-768 resolution or higher
A DVD drive for installation
Mac OS X v10.4.10 or later
QuickTime 7.2 or later
500MB of disk space to install Final Cut Express and LiveType
Additional 500MB to install LiveType content
good luck.

I recently purchased a copy of Lion, will I be eligible for a free upgrade of Mountain Lion?

I recently purchased a copy of Lion, will I be eligible for a free upgrade of Mountain Lion?

no, sorry.
However, Lion has some great features in and of itself!
you will have to purchase it for 20 dollars in the app store (USA price) to upgrade to ML, the redemption codes that you may be reacting to are for people who recently purchased a computer and were told that they would be able to receive a free download of ML when it is released to make sure their computers are up to date.
This allows apple to release the hardware before the latest software, but still offer the latest software for free, because they're cool like that .
I hope this helps

Is Final Cut Studio version 3 compatible with OSX Mountain Lion?

Is Final Cut Studio version 3 compatible with OSX Mountain Lion?

Do a search on this forum, there are numerous ones, some with issues some without.
DM

Mavericks upgrade from Mountain Lion deletes all user accounts

This is a lesson for upgrading too early (and too eagerly).
Today I tried the Mavericks upgrade from Mountain Lion on my 2007 Macbook Pro, after going through all the pre-installation/pre-upgrade checklists.
I don't think I have gone from a very high to a down low in such a short space of time. I really wanted to move on from Mountain Lion and when the installer finished the upgrade to Mavericks and re-started my MBP, I was super excited. When the restart completed and I was presented with the login prompt, I tried entering my user name and password. First time, it shaked on the password... OK, you'd think that is a typo. Re-entering the password... same thing.
You can imagine what ensued. After entering my password v-e-r-y slowly many times, I started realising that something went very VERY wrong.
Just for information, I used two different user accounts on my MBP under Mountain Lion. The one account had administrative priviledges and was only used for installing applications and a few other administrative tasks. Then I have a second personal account, which does not have administrative priviledges and is the account I use daily for Mail, Safari, iTunes, programming etc.
None of those accounts worked under Mountain Lion. Basically, there is no way in.
I then proceeded to boot with the startup option Cmd + S (command-line access). Once that was completed, I was in as root and checked the /etc/passwd. None of the user accounts were there. I was only able to find two user accounts: root and nobody; and a long list of user account that started with an underscore (I think these are some sort of esoteric user accounts). So, it appears that the Mavericks upgrade did not accurately bring over the user account information from my Mountail Lion installation.
Then, I went into the /Users directory and there I could see the home directories for all the users as they were defined under Mountain Lion. The contents were intact too.
It seems to me that the Mavericks upgrade from my Mountain Lion forgot to bring over the user accounts but it did preserve the contents of all the users' home directories.
Unless anyone can spot some sort of user error here (please let me know), I am heading back to Mountain Lion pretty swiftly. Otherwise, I suspect there is a bug in the Mavericks installer.
Any assistance is appreciated.

The reason this occurred is a mystery and has not been commonly reported. Consider the following. It may or may not help. You should probably print these instructions before proceeding.
Boot Single User mode again and do the following:
(You can skip the first step. It will check your boot volume for errors and correct what it can. If there were errors the installer should not have proceeded, but the possibility exists that directory corruption may have occurred during installation. That seems unlikely to me but could explain what went wrong.)
In Single User Mode:
At the :/ root# prompt, type fsck -fy and press Return or Enter. It will take a few moments to complete. If you are concerned that nothing is happening just press the Return key until you see the :/ root# prompt again.
Once the disk check is complete and the prompt returns, type mount -uw / and press Return / Enter.
Type launchctl load /System/Library/LaunchDaemons/com.apple.opendirectoryd.plist and press Enter. If you get an error message you may ignore it.
Type ls /Users and press Enter. All of the usernames on the computer will be listed, which is helpful if you don’t know or remember what these are.
Type dscl . passwd /Users/username password while replacing username with one of the users displayed in the previous step and replacing password with the new password of your choice. Press Enter. You will likely get an error message about a file or directory not being found. You may ignore this.
Type reboot and press Enter.

After upgrading macbook pro from mountain lion to mavericks computer performance slowdown

after upgrading macbook pro from mountain lion to mavericks computer performance slowdown

Fixing a Mavericks Installation Problem
How to manage a failed OS X Mavericks installation | MacFixIt - CNET Reviews.
Try these in order:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
     after the chime press and hold down the OPTION key until the boot manager screen appears.
     Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Will Final Cut Express be improved by upgrading from Mountain Lion to Mavericks?

Similar Messages

Maybe you are looking for