Will Labview 7.1 fix scale overlap problem?

I am having a problem with using multiple y-scales. My program demands that the user be able to add and remove y-scales at run-time as needed. When this is done to the waveform graph, scales eventually begin to overlap and the entire graph moves out of alignment. This problem was previosly reported for dealing with XY graphs. In the response the Labview support person stated that there should be a Reset Scale Layout method available at run-time. After incorporating the fix method given in the other report, my axis's still fail to align. Will this method be included for the waveform graph function in Labview 7.1 or has a permanent fix for this problem been made?
Thanks
Jonathon

Hi Jonathon,
Adding/removing scales programmatically can give some strange behavior if you don't manually refresh (or redraw) the graph each time using the Defer Panel Updates method for a Panel Invoke Node. I've attached a simple VI below using a waveform chart, but the same concept applies to waveform graphs.
Let me know if this doesn't fix your problem.
Thanks!
Kileen C.
Applications Engineer
National Instruments
Attachments:
mult_scales_fix3.vi ‏56 KB

Similar Messages

Will iPhoto library manager fix all my problems?, will iPhoto library manager fix all my problems?

Having problems opening multiple iphoto libraries, will iphoto library manager fix this so that Iphoto works as it usd to?
P.S
Will photos saved into pictures automatically save to Iphoto?
Thanks

1 - try iPLM and see if it does. The free demo version is all you need.
2 - No. Photos have to be imported into iPhoto. After they are the source files can be deleted from wherever they originated.
However, you must be running a "managed" library:
OT

My new iPhone 5 will not pair with the Bluetooth in my 2008 Prius. I see that I'm not alone. Will there be a fix for this problem ?

Will there be a fix for the Bluetooth problems that me and many other iPhone 5 owners are experiencing?

Go to the settings in your Jeep, "forget" the iPhone. And on the iPhone "forget" the jeep. Then put the Jeep in Pairing Mode and tap Settings/BlueTooth on the phone and pair them anew (which sounds less confusing than "repair them").

Waveform chart Y scale overlap problem

Hi all,
Attached vi (in LV8) tells my problem.
Hope I will get solution.Thanks in adv.
Kousy
Attachments:
Trial_graph.vi ‏19 KB

Hi David,
"I have had this kind of chart with nine plots earlier. - That chart functions Ok when Im running it as separate VI.
But when I call this from Main and load onto my subpanel, THESE Y Sclaes getting into mess (overlapping one
scale on the other), even with selection of 2-3 check boxes itself. I thought 'Use Minimum field width" in Format
& Precision tab will help. Even then its getting overlapped. - This is one problem." - This VI developed in LV7.1
I cannot run the application without hardware, hence i run it as separate vi and captured the attached images.
Update plot button value change event, reads the waveform file from disk and depends on the selected check box, it makes visible or invisible the corresponding Y scales and shows the actual plot onto the chart.
"Now I have created the same kind of chart for 7 channels'plot, shown above.
I have done like this - I have created one plot with name of Temp. And i added reqd. no. of plots
and duplicated the Y scales relevant. So now I have chart with 7 Plots. So far so good.
Now I like to add minimum field width for all 7 plots & precision for Channel 4 as mentioned in (**) But it shows the min.
field width to all plots, once i proceed with that and go on to change the precision for 4th channel, causes confusion by
showing the precision to 7th channel (Torque). I dont know where im making mistake & how should i correct it" - This is developed in LV8.0, attached VI of my earlier post.
Attachments:
Prob_1.JPG ‏96 KB
Prob_2.JPG ‏87 KB

Will upgrading my OS fix the following problem...

The problem: I want to log into a WPA2-encrypted wireless network. I have a 1ghz G4 powerbook with an older airport card that runs at B speeds only, which is fine. Speed isn't the issue. It's the WPA2 that's an issue. I'm running 10.3.9 and will happily upgrade to whatever the next version is that's coming out soon if I can expect WPA2 support.
My husband is running 10.4.something and he is able to use our WPA2-encrypted network, but he's got a newer powerbook with a newer airport card, so I don't know if it's the hardware or the software that matters.

I was hoping to avoid buying a newer card because I don't want anything in the pcmcia slot. If I could upgrade the airport card itself, that would be fine, but I don't think I can.
It's sad, really. This is the one and only thing that's starting to become a problem with this powerbook. I have no need to upgrade the machine in any other way. It works and satisfies my needs perfectly fine in every other way except that I really want WPA2/AES. Does anyone know of any third party software that could do what I want? I didn't think this would be hardware dependent as I was recently able to flash a bridge so that it would support WPA2 (although I think it was originally able to support WPA, if that matters at all).
If I have to buy an expansion card, then I will, but if I can go with a software solution, I would much prefer that.

Will Archive and Install fix my Print Problems?

Was running 10.39, all was fine.
Repaired Permissions, used Tiger Update DVD
to update from my 10.39 to Tiger 10.4.
Rebooted, repaired permissions from Tiger Disc.
Rebooted, installed OSX 10.4.4 Combo update to
get up to latest Tiger.
Ran all patches I need from Software update,
rebooted to Tiger Update DVD,
repaired all permissions.
Rebooted back, now I cannot print to my Canon i560 USB printer.
I get the dreaded "services-" error.
I re-downloaded the driver from Canon's Website
(disc is misplaced right now). Tried to load it, got to
a part in the installer, and hung. After half and hour,
force quit it, rebooted, tried the "Printer Repair Permissions" fix, Printer Utility now shows the Canon Printer as a USB printer, but the driver selection gives
me a lot of "BJ-Gimp" printer selections, but no "i560".
Now the kicker: I took the printer and disconnected it
from the Mac, and connected it to my wife's iBook,
which runs 10.4.3, and it found and connected flawlessly,
and I could get a PDF printed.
My other issues on this mac is that Compressor has stopped
working, but I have got it to the point of where it
at least run somewhat using a Terminal fix I found
on the forums. But I'm strongly thinking that to get this
baby into shape and running smoothly like the iBook
does, I should do an Archive and Install of OSX 10.4,
then patch up to 10.4.3, then possibly 10.4.4.
Any thoughts before I make the attempt?

Thanks, after a looooong night of re-installing
back from DVD to 10.4, then up to 10.4.3,
(why press my luck?)
then re-installing FCP 4 and DVDSP 3, and doing all patches, both my Compressor 1.21 works great as before, and I got my printer settings back. I did have a bit of a bout with the
"blue screen of death" but all is great now!

Will there be a fix for Firefox's problems with Hotmail. I have gone back to 3.5.9 but mostly I am disappointed by the lack of action on this serious problem where a major and critical feature of a major international website is unavailable in the Firefox

Will there be a fix for Firefox's problems with Hotmail. I have gone back to 3.5.9 but mostly I am disappointed by the lack of action on this serious problem where a major and critical feature of a major international website is unavailable in the Firefox browser.
== URL of affected sites ==
http://www.hotmail.com

We've reached out to the Hotmail team and they've determined that this is a bug in their code. (It was masked by a timing issue in 3.5 that was fixed in 3.6.) We've worked with them to develop a fix but they may not have deployed it yet.

I am having a issue installing Adobe Acrobat XI. I am running Windows 8.1. When go to install it gets an error. The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.

I am having a issue installing Adobe Acrobat XI. I am running Windows 8.1. When go to install it gets an error. The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.
I have tried to uninstall all Abode Acrobat installations but one file remains and refuses to be uninstalled. It gives me this error : Error applying Transforms . Verify that specified paths are valid. It was installed on Sept 18 2014. I have downloaded a Transform update but it tells I do not have a Adobe Acrobat product installed.

Hi all,
Sylonious, did you manage to sort this problem out? I have been experiencing similar problems. I think my problem was because I had many different versions of JDKs. I have done a complete re-install. I would be really grateful to you (and anyone else) for help with this problem.
I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
When I compile using "javac" I get an error saying "javac" is not recognised.
When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
I have removed all previous references to java in the registry editor.
Please help !
Regards,
Vipul

Anyone know when Apple will bring out a patch to fix the volume problem you get on mac mini after downloading OS 10.8.5

Anyone know when Apple will bring out a patch to fix the volume problem you get on mac mini after downloading OS 10.8.5?

Only Apple knows the answer to whether or not there is a verified problem and if so when will a fix be released. As is their custom, Apple does not talk about these things and the rules of these communities prohibit speculation about future udates or upgrades. It is probably safe to say if a fix is deemed necessary it will be called OS X 10.8.6.

It says Lightroom encountered an error when reading from a previous cache and needs to quit. Light room will attempt to to fix the problem the next time it launches.

how do i fix this. It says Lightroom encountered an error when reading from a previous cache and needs to quit. Light room will attempt to to fix the problem the next time it launches.

Have a look at this thread.
Lightroom encountered an error when reading from its preview cache and needs to quit. Lightroom will attempt to fix this problem the next time it launches"."

HT4061 I cannot switch my IPAD on and it will not power up - i had this problem before and cannot remember how we fixed it?

Can anyone help us please?
I cannot switch my IPAD on and it will not power up - i had this problem before and cannot remember how we fixed it?

Press and hold both the home button and lock button until the apple logo shows up.

I couldn't log into my apple account on my iPad, then i couldn't unlock it resulting in it being disabled, however it's the same as my iPhones password, I then called apple, i was hung up on twice and they said it will cost £70 to fix THEIR problem, help?

I couldn't log into my apple account on my iPad, then i couldn't unlock it resulting in it being disabled, however it's the same as my iPhones password, I then called apple, i was hung up on twice and they said it will cost £70 to fix THEIR problem, help?

If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
You may have to force iPad/iPod into Recovery Mode
http://support.apple.com/kb/ht4097

I have an iMac4.1 and my iPhoto is very slow and the thumbnails correspond to the wrong pictures. How do I fix this? Or is my iMac too old? Will getting a new iMac solve this problem?.

I have an iMac4.1 and my iPhoto is very slow and the thumbnails correspond to the wrong pictures. How do I fix this? Or is my iMac too old? Will getting a new iMac solve this problem?
I realize is only 512MB of memory but I want to make sure that a new iMac will solve this problem. Can the new iPhoto handle 10GB or more of photos? Or do I have to go to Picasa anyways in which case I can buy any computer to do that?

The model of Mac is not partcularly relevant, it's the version of the OS and iPhoto that matter.
iPhoto - since 2006 - is good for 250,000 images.
Regards
TD

Problem with BB10 that still not fixed...when will we see them fixed?

there are some problem that I have noticed on the Verizon network that is Gimping my BB10 experience which is not making me happy
1 The Verizon network is causing a big problem with remote file access. (still no update on a fix)
2 The Verizon network is causing a problem with built in voice mail. (still no update on a fix)

The newer versions of the BB10 OS software fix the first problem, however I use the free YouMail app (sideloaded app officially provided by the developer) for Virtual Voice Mail so I don't know about the problem with #2.
You can load the official 10.2 OS upgrade that is being released worldwide onto your Verizon Z10. The Verizon reps here will say you will void your BlackBerry warranty, but these are official OS's, not "leaks", so it will not. Go to CrackBerry.com to find out how, it's not too hard to install unless you don't know anything about using a computer.

When will there be a fix for the permissions problem in iTunes 11.1.1? I get a list of three or four-hundred when I run the repair program.

Does anyone know when will there be a fix for the permissions problem in iTunes 11.1.1? I have a list of three to four hundred repairs everytime I use the repair program. ~Mike.

SinkeMH wrote:
Does anyone know when will there be a fix for the permissions problem in iTunes 11.1.1
Likely someone does but Apple has not stated if/wehn.
I have a list of three to four hundred repairs everytime I use the repair program. ~Mike.
Then don't use the repair program unless you are actually having an issue.

Will Labview 7.1 fix scale overlap problem?

Similar Messages

Maybe you are looking for