Will my HP all-in-one printer work?

Before I drop my hard earned savings on a new 17" intel iMac, I wanted to know how I can find out if my printer will work now, or if I need to wait for drivers. I have an HP PSC-2210 all-in-one printer. It worked fine on my G3 iBook, and I have no reason to replace it yet. Does anyone here know if it will work "right now"? I'm also going to email HP tech support to see what they say.
I just like to know what obsicles I'm facing before I purchase. Thanks.

to start off with, connect each printer to another computer to make sure that it actually works.
then delete ALL of the installed printers shown in the Printer Setup Utility on the iMac
then connect one of the working printers directly to the iMac
Add the new printer
Try to print.
Then try the other one.
The latest HP driver is 7.7.2 for my PSC1210xi. I assume that this driver, or a similar one, will the the correct one for your printer. Go to the HP web site and get the latest driver set.
- gws

Similar Messages

Will the 2710 all-in-one printer be supported by windows 7? works on xp, will it on windows7?

Is the 2710 all-in-one printer supported/compatible to Windows 7? It was on a XP, however hard drive is crashing and need to see if I may need to buy another all in one printer or able to keep my 2710.

HP recommends that you use genuine HP cartridges. HP cannot guarantee the quality or reliability of non-HP cartridges, or refilled HP cartridges.
Well that being said about the cartridge, I would try a power reset like this:
With the power on, open the ink access door. Remove the power from the printer. Remove the ink cartridge and close the cover. Wait at least 30 seconds then reconnect the power cord to the printer. Turn the printer on. Open the access door and insert the cartridge. That may clear up the issue, if not well.......
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Which wireless all in one printers work best with ipad 4

Please help me decide which wireless all in one printer works best with the ipad 4. I am looking for better photo printing quality, but not the very best. I am concerned mainly with being able to set up the printer using only my ipad 4 and wireless router, as I do not own a PC with a cd/rom. I am also interested in which brand of compatible printers is less expensive to buy ink and paper for. I would prefer a more compact unit. Thank you in advance for any advice.

These days I prefer Brother printers. They appear to have engineered their printers with AirPrint as well as OS X compatibility from the start, unlike certain others who appear to have included it as an afterthought.
Brother's models are inexpensive, their ink is also inexpensive and lasts a long time, and their photo quality is at least as good as anyone else's. They have a two year warranty and lifetime free technical support with people who understand Apple.
Read the reviews (Amazon for instance, but be sure to read user reviews on the various manufacturer's websites as well) and decide for yourself.
Brother™ Monochrome Laser Printer and All-in-One models now support AirPrint.
Brother™ Color Inkjet All-in-One units now support AirPrint.
I positively detested every inkjet printer I ever had until I bought the Brother.

I have a Mac OS 10.6.7 that will not activate the scanner option on a C7280 HP All in One Printer, Fax, Scanner - the Printer works fine but the scanner does not - any suggestions?

I have a Mac OS 10.6.7 that will not activate the scanner portion of an HP C7280 All in One - prints fine - but won't activate scanner.

I have the same problem with an HP Scanjet 8250 and my Epson Stylus NX400. I have reloaded allegedly updated drivers. I have researched using SANE. Neither scanner wants to work since the OS X10.6 update. I have found very little out there about this problem.
Can anyone help me make these bricks work? Really would like a solution that won't cost me hundreds to replace the equipment. Thanks so much.

HT1338 since updating to Mountain Lion my HP 8180 all in one printer will not work and shows it as idle and pipe broken it connects via WIFI

since updating to Mountain Lion my HP 8180 all in one printer refuses to work it show as "pipe broken" and printer as idle can anyone help please

do you mean the printer? ive already tried that without success any further help apprecaited

I just upgraded to mac osx lion and my 7410 all-in-one printer will not work

I cannot get my hp officejet 7410 all-in-one printer to work with Mac OS X Lion

hi,
check this link for Mac 10.7 installation guide.
l0ri3
~Though I work with HP my posts and replies are my own and not from HP.~

IMac will not recognize scan function of all in one printer

My 24" iMac will print on the HP Photosmart 3210xi All in One, but will not scan.
Twice, (to ensure I didn't miss anything) I have run the manual un-install procedures prescribed from HP, and installed the appropriate driver for Mac with no success.
When I try to scan, the scanner wants to begin, but the computer displays the message, "Sorry, scanner could not be initialized. (Scanner not found.)" We have the correct driver (Not the Print only option).
This printer still works "full-up" on the clunker PC, so it's not a hardware issue with the printer.
Any others with similar all-in-one issues? Solutions?

I had the same problem with my HP Photosmart 2610xi All In One Printer. I went to the HP website and downloaded the full feature software/drivers and now it works great. Below is the software that you should download for your printer...hope it works for you!
HP Photosmart Full Feature Software/Drivers - Mac OS X v10.3 and v10.4 (Universal)
08-2007 9.5 170.57M

Deskjet 2540 all in one printer - does the scanning work with Mac OS Yosemite 10.10.1 ?

I was trying to scan a document using this new printer and my Mac OS Yosemite 10.10.1 and I cannot even find the page that allows me to scan since now it is all through the computer. Is this printer compatible with this operating system? and if so, what can I do to see the page where the file actually shows up to scan?
thanks,
Natali

Hello NatDeskjet2540,
Welcome to the HP Support Forums!
Regarding your inquiry into scanning with 10.10 and the Deskjet 2540, I would like to help. The software you need to install is here: HP Deskjet 2540 All-in-One Printer series Full Feature Software and Drivers. Once installed, you can access the the walk through here: Scan from OS X v10.9 Mavericks With the Full Feature HP Software for HP Multifunction Printers.
Hope this help, let me know.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

My hp all in one printer will not link to my new router.

I have a hp all in one printer deskjet 3510 model and i just got a new belkin N600 router and they will not link for wireless printing. The printer just times out when I try to get them to link. I use the push button setup because thats what i have. How can i get them to link. I had no problem with my old router it was a linksys.

Replacing your wireless router try here.
http://www.hp.com/global/au/en/wireless/reconfiguring-system-help3.html
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

HP C7200 All-in-One printer will not print through the Wifi network

I have used the HP printing and scanning Doctor but none of the proposed solutions have solved the problem. The blue light for wirelwss 802.11g service is on and connected to the same Wifi address as my laptop is using now. My Dell laptop is running Windows 7 and the printer works if I use the USB connection instead of the Wifi. Any suggestions?
Larrypat
This question was solved.
View Solution.

Welcome to the community @Larrypat
I understand your printer is not connecting wireless and only connecting USB. I have some questions and ideas for you that should help. Let's get to it!
Could you please remove the USB cable, run the Print and Scan Doctor again and send me a screen shot of the results from running the diagnostic tool?
Also let me know which model from the C7200 series you have:
HP Photosmart C7250 All-in-One Printer
HP Photosmart C7280 All-in-One Printer
HP Photosmart C7288 All-in-One Printer
Try power cycling the network devices:
Turn off the printer and computer and unplug the router for 1 minute (do not press any buttons on the router).
Plug the router back in and wait another minute, next turn on the printer and computer. Run the Print and Scan Doctor afterwards and try printing.
Let me know how it goes and the results
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Deskjet Ink Advantage 2515 All in One Printer is not working

Please help me to fix my HP Deskjet Ink Advantage 2515 All in One Printer. Before it is ok to use it, but after a couple of months when I dont have an ink I didnt use it. As of today I have an important papers to scan but when I try to plugged in the outlet my printer power is off but the two lights in fit to page are on and also the attention light is on. I use to plugging it again on and off from the cable wires but still the same case. I try to push the power on but it doesnt work. Please help me. Thanks in advance. :-(

Hello Folks,
Welcome to the HP Support Forums! I understand you are not able to print to your HP Deskjet Ink Advantage 2515, the power button is non responsive.
I would like you to start troubleshooting here: The HP Printer Does Not Turn On or Respond When the Power Button is Pressed
Please let me know the outcome, I will watch for your reply.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Photosmart 3210 All-in-One printer will not read Micro SDHC memory card. Help!

I have a Photosmart 3210 All-in-One printer that will not read my Micro SDHC memory card. Help! I get an memory card error message but no idea where to go from there.

Hello
I understand the printer can't read the memory card.
This is a url for the printer specifications and include the memory card types supported.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00408357&tmp_task=prodinfoCategory&cc=us&dlc=en...
Here is a url for troubleshooting memory cards.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00059994
If you need more assistance just let me know.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

My [hp printer 2515 all in one] not working...plz help me

how to do with my printer? the ink catridge are still at 60%...my printer not able to print, scan, and copy(photocopy). any recommendation on how to get my printer working back?

Hey @kabutapi,
Welcome to the HP Support Forums!
I understand that you are not able to copy, scan, or print on your HP Deskjet Ink Advantage 2515 All-in-One Printer. I would like to assist you with resolving this issue today. Now I understand that you have checked your ink cartridge levels and they're sitting around 60% which is great. However, if you're not able to scan, this has nothing to do with cartridges. Therefore, at this time I do not think you're experiencing a cartridge issue.
In order for me to best support you I will need more information regarding the error state that you're receiving on your printer. If you're seeing blinking lights when you try to perform a copy I need to know exactly what lights are solid and what lights are blinking on your front panel.
Also, if you get any error messages on your computer when you try to print, I need to know the exact error message that you're seeing.
For further information regarding blinking light error states and what each error state means, please refer to: Blinking Lights on the HP Deskjet 2510 and Deskjet Ink Advantage 2515 All-in-One Printer Series
Once I know what error state you're receiving I will be able to guide you through step-by-step troubleshooting instructions to resolve the error state. I look forward to hearing from you!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

What is the best all in one printer that works with the iPad

The best all-in-one-printer to use with the ipad mini

Any that advertise Airprint compability will work for printing. Note that you can't use the scanning or faxing features of an all-in-one with an iPad.
See the Airprint printers on the Apple store site:
http://store.apple.com/us/ipad/ipad-accessories/printers#!
Matt

I just purchased a Brother MFC-9340CDW all in one printer. It shows up on a list of compatable airprint devices but I can't seem to get it to work. Any suggestions?

I just purchased a Brother MFC-9340CDW all in one printer. It shows up on a list of compatable airprint devices but I can't seem to get it to work. Any suggestions?

Hi,
It won't work with airplay, here is how I got it to work with OSX 10.9.4 fully patched;
you will need to use the serial cable to start the process:
In-brief Version:
0) Go grab the firmware update tool, the driver, and the scanner software
1) Turn off the firewall and antivirus (if you use it ??)
2) Update the firmware using the serial line
3) Reserve a static IP outside the DHCP range (using the MAC address of the printer) on your WAP server
4) Configure the printer to use a static IP through the front panel
5) Configure the printer WIFI with your SSID and net key through the front panel
6) Install the CUPS driver on your computer through the printer settings by specifying the static IP
7) Install the Scanner driver then go into the Control Center and add you computer and printer configuration
I generally use this kind of set up so that the printer comes back at the same place after a power failure in
the event that it has a crappy driver.
For those of you who need a little more help:
0) Turn off anti-virus and firewall software (it did seem to matter)
1) Go to the Brother Center and download 1) The firmware update tool, 2) the driver, 3) the scanner software
2) Go to the front panel on the printer: tools -> all settings -> network -> tcp/ip -> WLAN ; find the MAC address and write it down
3) Plug the printer in using the serial cable, it will auto detect and you will be able to talk to it.
4) Install the firmware update tool by double clicking on the dmg you downloaded
5) Update the firmware and the subfirmware (NOTE: this is a bit finicky -- you may have to unplug and replug it in a couple of times before it starts to talk with the device, after it starts the update process it frequently gives up in the middle, DO NOT unplug the device at this point, just select "retry" from the dialog and it will continue -- it will take about 15 mins or so.
6) Once the firmware is installed, go to your WAP server and look at the DHCP IP range; typically something like 10.0.1.2 to 10.0.1.200
7) If there is a capability to reserve an IP on your WAP server pick an IP outside the range in 6 (e.g. 10.0.1.201) and use the MAC address (from step 2) for the reservation... its fine if you don't reserve it -- this is an extra precaution -- just make sure you pick an IP outside the DHCP range
8) Go to the front panel on the printer: tools -> all settings -> network -> tcp/ip -> WLAN ; then set the IP address:
     boot method: static
     IP address: the address you chose in 7)
     mask: 255.255.255.0
     gateway: the IP of your router -- typically 10.0.1.1
8) Go to the front panel on the printer: tools -> wireless -> setup wizard -> let it find your network, select it, and enter your key.
9) Reboot the printer and check it connects to your wireless network
10) Go to the front panel on the printer, tools -> all settings -> print reports -> network configuration ; print the report and check the IP and MAC
are what you think they should be.
11) Go to your computer, bring up a terminal (applications->utilities->terminal)
12) Ping your printer to make sure its up and accessible -- type: "ping 10.0.1.201" (or whatever IP you used in step 7) and check you get a response -- not a timeout -- if it works disconnect the serial line and delete the (serial line) printer from the list of printers -- you won't need it anymore -- if not you screwed up somewhere along the line
13) Now the printer is on the wireless network, install the driver by double clicking the dmg. Then go to system preferences->printers & scanners
     click +
     in the add menu click IP
     enter your IP (from step 7)
     make sure the Protocol is IPP
     Name the printer and set its location
     Go to Use field, in the pull down menu select "Select Software"
     Go through the list and find the Brother MFC-9340CDW CUPS driver -- if its not there you screwed up installing it so go do it again.
14) Go back to the printer page -- select the printer, select Open Print Queue, then select Settings -- check the Driver Version is 4.1.0 -- if
it says 2 you are using the airplay version which seems to be buggered -- so you need to try again.
15) Go open a word document and print it -- smile you are nearly there
16) Install the scanner software by double clicking the dmg
17) Open the Control Center, under the Model: select Other
     Click +
     Select your printer
     Enter your computer name in the display name and click ok
18) Go into adobe Acrobat File->Create->PDF from Scanner (or whatever software you are scanning with)
19) Select "Brother TWAIN" from the scanner list -- if its not there you screwed up the scanner software installation -- go do it again
20) Put a document in the top of the printer and press scan -- wammo !
21) Turn back on your firewall (and antivirus if you have it -- why I can't imagine but what the ****)
22) Go ping the printer and make sure its still reachable (see step 12) -- if not you need to figure out what your antivirus is screwing up because the firewall is no problem
23) try printing and scanning again...
24) rejoice... your done.

Will my HP all-in-one printer work?

Similar Messages

Maybe you are looking for