Win 7 IE10 "Internet Explorer Branding failed due to the error listed below. The specified procedure could not be found."

Hi All,
I am testing some Windows 7 builds with IE10 installed and when I do a Resultant Set of Policies on them they all have an error in the user section of the GPOs as shown in the image.
To investigate I unlinked all the IE policies from the OU and rebuilt the PCs and wiped the user accounts' roaming profiles (local already wiped with the format of the HDD for the rebuild) but still get the same error even with no IE policies
applied. I have looked through RSOP and there are no settings applied either under the maintenance section or under Admin Templates > Windows Components > Internet Explorer.
Please can someone fill me on how to stop this error from showing?
Thanks

Hi Robert,
As I mentioned in my original post I see that message being "produced" when I run RSOP.msc and generate the results. I probably should have posted this image in as you can see what section is affected -
I've been digging around in the event viewer and have found this multiple times throughout.
This is an IE install downloaded directly from Microsoft.com. I've uninstalled it, rebooted,, re-downloaded again and re-installed it and am still getting the same output. If I leave IE8 on the PC I don't get this issue at all. We've not used the IEAK
to configure it in any way.
The problem occurs with the client trying to apply IE policies via group policy. I can only see the error when I run RSOP and generate an output.
Another issue I've found is that it won't apply the proxy settings via group policy preferences IE control panel section - I'm having to use reg entries instead. I found this post with people having the same issue with the same error -
http://social.technet.microsoft.com/Forums/windows/en-US/7efbd672-8196-4053-8167-d94da5d2f939/bypass-proxy-exceptions-are-not-coming-in-windows-8-thorugh-group-policy?forum=w8itprogeneral
Which text file should I be looking for to trace it back from?

Similar Messages

Internet Explorer Branding failed due to the error listed below Server 2012 R2

After upgrading my AD and 1 DC of my two DC's to Server 2012 R2 I am seeing the error.
Internet Explorer Branding failed due to the error listed below.
The specified procedure could not be found.
This is because the Group policy "Internet Explorer Branding" is defined.
All discussion groups I have been able to find, suggest going onto the Windows 2008 R2 DC and use GPEDIT to remove this policy. Unfortunately, it does not appear where it should.
How do I delete it?
Thanks

Hi Paul S I,
Please notice that for managing IE10
with Group Policy Preferences you need
to use a Windows 8 or Server 2012 DC.
For proxy server
and proxy exception setting GPO setting, you can follow
below post in our team blog to move the policy to GPP.
How to apply IEM
to IE10
http://blogs.msdn.com/b/asiatech/archive/2013/07/01/how-to-apply-iem-to-ie10.aspx
In the windows 2008R2,
Internet Explorer 10 option won’t be displayed under the Preference->Control Panel Settings->
Internet Settings.
In addition, it would be helpful for further troubleshooting if you could collect the following information:
What version of IE that you are using? In the above solution, we suppose you are using IE10.
Could you provide the screenshort to provide detailed information?
Regards,
Lany Zhang

ImportError: DLL load failed: The specified procedure could not be found.

Hi,
I am new to Python. I'd like to try and connect to Oracle 10.2.0.4 database using Python. I have Oracle 10g client installed. When I try to import cx_Oracle I get the error below.
If anyone can help me how to solve this, I will be grateful.
C:\Users\milivojm>set path
Path=C:\Oracle\OraClient10g\bin;C:\Oracle\OraClient10g\jre\1.4.2\bin\client;C:\O
racle\OraClient10g\jre\1.4.2\bin;C:\Oracle;C:\Oracle\OraOdac11g;C:\Oracle\OraOda
c11g\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program File
s\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\CollabNet Subversion;C:\P
rogram Files\jZip;C:\Program Files\QuickTime\QTSystem\;D:\Python\
C:\Users\milivojm>python
Python 2.6.2 (r262:71605, Apr 14 2009, 22:40:02) [MSC v.1500 32 bit (Intel)] on
win32
Type "help", "copyright", "credits" or "license" for more information.
import cx_OracleTraceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: DLL load failed: The specified procedure could not be found.
exit()C:\Users\milivojm>dir c:\Oracle\OraClient10g\bin\
Volume in drive C has no label.
Volume Serial Number is B0A4-2659
Directory of c:\Oracle\OraClient10g\bin
21.11.2008 15:29 <DIR> .
21.11.2008 15:29 <DIR> ..
06.03.2004 03:19 108.920 cemutls.exe
27.01.2004 04:49 86.124 COREJAVA.DLL
21.11.2008 15:28 1.024 emca.bat
08.03.2004 17:15 52.552 extjob.exe
08.03.2004 17:15 52.552 extjobo.exe
07.02.2004 22:52 28.672 launch.exe
21.11.2008 15:27 659 lbuilder.bat
27.01.2004 06:47 81.948 LCSSCAN.EXE
27.01.2004 06:46 43.064 LMSGEN.EXE
08.03.2004 17:12 16.656 loadpsp.exe
06.03.2004 03:20 96.592 lsnodes.exe
27.01.2004 06:46 68.556 LXEGEN.EXE
27.01.2004 06:46 276.908 LXINST.EXE
21.11.2008 15:28 484 mkstore.bat
21.11.2008 15:27 1.149 netca.bat
21.11.2008 15:27 108 netca_deinst.bat
08.03.2004 17:59 188.416 oci.dll
08.03.2004 17:16 32.768 ociw32.dll
10.02.2004 13:13 110.592 ODBTREEVIEW.OCX
21.04.2005 04:13 864.256 oip10.dll
21.04.2005 04:05 75.500 oip10.tlb
21.11.2008 15:27 525 olsadmintool.bat
21.11.2008 15:27 546 olsoidsync.bat
10.02.2004 13:12 73.728 OO4OADDIN.DLL
10.02.2004 13:12 69.632 OO4OCODEWIZ.DLL
10.02.2004 13:12 20.480 OO4OCODEWIZ.EXE
21.04.2005 04:05 24.576 oraansi10.dll
21.11.2008 15:27 34 oracle.key
05.03.2004 19:15 20.480 OracleAdNetConnect.exe
05.03.2004 19:15 24.576 OracleAdNetConnectRCUS.dll
05.03.2004 19:16 24.576 OracleAdNetTest.exe
05.03.2004 19:16 24.576 OracleAdNetTestRCUS.dll
08.03.2004 16:39 1.909.008 oraclient10.dll
21.04.2005 04:14 241.664 oraclm32.dll
10.03.2004 16:09 749.840 oracommon10.dll
27.01.2004 04:49 688.400 ORACORE10.DLL
06.03.2004 03:16 57.616 oradbcfg10.dll
10.02.2004 13:17 386 oradc.lic
21.04.2005 04:13 102.400 oradc.ocx
08.03.2004 16:39 4.235.536 orageneric10.dll
14.03.2004 10:43 327.952 orahasgen10.dll
26.03.2004 17:11 77.824 oraimr10.dll
05.03.2004 19:14 45.056 orajmisc.dll
27.01.2004 17:16 278.800 oraldapclnt10.dll
27.01.2004 17:16 258.320 oraldapjclnt10.dll
27.01.2004 06:46 37.136 ORALXLED.DLL
05.03.2004 19:25 946.448 oran10.dll
05.03.2004 19:15 37.136 oranad10.dll
05.03.2004 19:11 33.040 oranbeq10.dll
05.03.2004 19:12 24.848 ORANCDS10.DLL
05.03.2004 19:11 94.480 orancrypt10.dll
05.03.2004 19:11 24.848 oranhost10.dll
05.03.2004 19:11 33.040 oranipc10.dll
05.03.2004 19:12 143.632 oranjni10.dll
05.03.2004 19:11 180.496 oranl10.dll
13.03.2004 03:40 74.000 oranldap10.dll
10.03.2004 20:42 33.040 oranldapj10.dll
27.01.2004 06:45 586.000 ORANLS10.DLL
12.03.2004 01:23 1.544.353 oranmemso.dll
05.03.2004 19:11 33.040 orannmp10.dll
05.03.2004 19:12 28.944 orannzentr10.dll
05.03.2004 19:12 28.944 ORANNZMCS10.DLL
05.03.2004 19:11 962.832 orannzsbb10.dll
05.03.2004 19:12 53.520 oranoncj10.dll
05.03.2004 19:10 221.456 oranro10.dll
05.03.2004 19:12 37.136 oransgr10.dll
05.03.2004 19:11 49.424 orantcp10.dll
05.03.2004 19:12 49.424 ORANTCPS10.DLL
05.03.2004 19:11 24.848 orantns10.dll
05.03.2004 19:13 28.944 oranzts10.dll
06.03.2004 03:16 209.168 oraocr10.dll
14.03.2004 20:50 147.728 oraocrb10.dll
21.04.2005 03:54 438.272 OraOLEDB10.dll
21.04.2005 03:54 1.608 OraOLEDB10.tlb
21.04.2005 03:55 24.576 OraOLEDB10us.dll
21.04.2005 03:53 131.072 OraOLEDBgmr10.dll
21.04.2005 03:54 32.768 OraOLEDBpus10.dll
21.04.2005 03:45 24.576 OraOLEDBrfc10.dll
21.04.2005 03:46 24.576 OraOLEDBrmc10.dll
21.04.2005 03:53 139.264 OraOLEDBrst10.dll
21.04.2005 03:43 24.576 OraOLEDButl10.dll
21.11.2008 15:28 483 orapki.bat
08.03.2004 17:07 1.052.944 ORAPLP10.DLL
08.03.2004 17:06 2.867.472 ORAPLS10.DLL
04.02.2004 00:10 28.944 ORASLAX10.DLL
27.01.2004 06:46 69.904 ORASNLS10.DLL
11.03.2004 21:35 483.600 ORASQL10.DLL
09.03.2004 21:46 61.712 orasrvm10.dll
06.03.2004 03:17 143.632 orasrvmhas.dll
27.01.2004 06:45 78.096 ORAUNLS10.DLL
27.01.2004 04:49 28.944 orauts.dll
27.01.2004 04:49 830 orauts.sym
08.03.2004 16:39 24.848 oravsn10.dll
03.02.2004 07:56 10.240 orawsec9.dll
03.02.2004 23:58 1.473.868 ORAXML10.DLL
30.09.1999 17:43 2.478 orclcontainer.bmp
30.09.1999 17:43 2.478 orclcontext.bmp
03.08.1999 19:00 246 orcldbserver.bmp
30.09.1999 18:10 3.310 orclnetservice.bmp
24.02.2004 13:11 57.344 OsUtils.dll
10.03.2004 19:17 60.280 sclsspawn.exe
21.11.2008 15:29 321 selecthome.bat
21.11.2008 15:28 266 selecthome.bat.oo4o
21.11.2008 15:29 55 selecthome.bat.oraoledb
27.10.2004 10:14 434.176 sqora32.dll
27.10.2004 10:16 65.536 sqoras32.dll
27.10.2004 10:16 32.768 sqresus.dll
21.11.2008 15:28 3.433 targetdeploy.pl
05.03.2004 19:17 37.084 TNSPING.EXE
21.11.2008 15:28 260 trcasst.bat
30.11.1999 12:32 145.408 unzip.exe
16.07.1998 18:36 104.448 zip.exe
112 File(s) 25.228.632 bytes
2 Dir(s) 8.552.009.728 bytes free

You have oracle 10g and python 2.6. Are you sure you installed the cx_Oracle version that is compatible with those particular Python and Oracle's versions? (It comes in several flavours so you need to be sure you installed the right one).

Specified driver could not be loaded due to system error 127: The specified procedure could not be found. (...SQORA32.DLL).

I recently upgraded from 10g to 11g and upon this upgrade, a website of mine stopped working.
It is a classic ASP website. I added a "testdatabase" page to the website to test the basic functionality of opening a connection. I've pasted the testdatabase page below. Anyways, upon running this page, I get this error:
Specified driver could not be loaded due to system error 127: The specified procedure could not be found. (Oracle in OraClient11g_home1_32bit, D:\app\oracleadm\product\11.2.0\client_1\BIN\SQORA32.DLL).
I have two other environments where I have done the same upgrade and the site works just fine. I have compared all the IIS settings in my other environments to that of the one suffering from the error. Also, in the IIS settings, I have made sure that "Allow 32bit" was checked.
D:\app\oracleadm\product\11.2.0\client_1\BIN\SQORA32.DLL is actually where this DLL resides.
I have also checked to make sure the environment variables are correct.
The very first environment variable in the PATH setting is D:\app\oracleadm\product\11.2.0\client_1\bin; and there are no other references to oracle in the PATH environment variable.
I have done a google search and I've seen that people also tell me to check ORACLE_HOME to make sure it's correct. I've checked this in both of the working environments and there is nothing there. There is also nothing there in the broken environment. What should be there? If anything?
I don't know where else to look. What could be causing this error?
<%
Option Explicit
Response.Expires = 0
Response.Buffer = true
Dim conn
Err.Clear
On Error Resume Next
Set conn = Server.CreateObject("ADODB.Connection")
conn.Open "DSN=RPS11;UID=FFXQM;PWD=ffxqm6prd$"
If Err.Number <> 0 Then
Response.Write (Err.Description & "<br><br>")
Response.End
conn.Close
Set conn = Nothing
End If
conn.Close
Set conn = Nothing
On Error GoTo 0
%>

As a temporary solution, add the Administrators group to the IUSR and IWAM userids and see if that works. If it solves the problem, then it IS a matter of setting the users privledges correctly.

Internet Explorer Branding Failed

Hey,
I know this has been asked several times such as
here and
here.
I followed all the suggestions and checked for all GPO that had IME enabled.
I removed all the gUserExtentionPOlicy settings from all affected GPO's.
Ran gpupdate /force, followed by a gpresult /user /h blah.html as an admin.
It still shows up in the results...... but shows an old processing time... How can I remove this?
Extra Info, Win 8.1 (Using RSAT, connecting to Server 2008 R2 DC's)

Hi,
Martin has provided a suggestion for this issue in the following thread:
> *Internet Explorer Branding failed due to the error listed below.*
> *The specified procedure could not be found. *
This is a result of IE Branding being abandoned with IE10 and above. To
get rid of it, you have to cleanup all your existing GPOs and remove all
appearances of IE Branding. Not easy if you cannot edit it anymore after
installing IE10 on your Admin Workstation :))
And to identify these, too:
dsquery * -filter
"(&(gPCUserExtensionNames=*{A2E30F80-D7DE-11D2-BBDE-00C04F86AE3B}*))"
-attr name,displayname
To get rid of IE Branding: dsa.msc, enable Tools - Advanced Features,
move to System - Policies - <GUID from above query>, open this
container's properties, switch to "Attribute Editor", edit
gPCUserExtensionNames, copy to notepad, identify a section in square
brackets [] that contains the above GUID and a second one (should be
{5C935941-A954-4F7C-B507-885941ECE5C4}, but don't bet on that :)) and
remove the whole block from [ to ]. Then paste back into the
gPCUserExtensionNames and save.
Help, removing old GPO... Migrated from 2003 to 2008 R2
http://social.technet.microsoft.com/Forums/en-US/68581433-a5f0-43af-a91f-190b3e7d96a1/help-removing-old-gpo-migrated-from-2003-to-2008-r2?forum=winser
Best regards,
Frank Shen

"Internet Explorer Branding failed..." even after the GPO was deleted

Our environment is Server 2008 R2 on all servers and Windows 7 Pro 64bit on workstations. Both servers and workstations are on IE10. When running RSOP on the servers we get the following message under the User section:
"Internet Explorer Branding failed due to the error listed below. The specified procedure could not be found."
I found that a GPO still applied IE settings through Internet Explorer Maintenance. I've since created a new GPO using GPP and deleted the old GPO. The problem is that the error still appears when running RSOP.
How can I remove these old GPO settings?

Hi,
Before going further, we need make sure that whether there is another GPO with Internet Explorer Maintenance settings configured
has been applied to the machine.
Besides, I want to confirm with you that whether the old GPO has been unlinked and permanently deleted. In order to narrow down
the cause of the issue, I suggest we could collect the following information.
GPMC.log
==================
a. On domain controller, click Start ->Run, type GPMC.MSC, it will load the GPMC console.
b. Right click on "Group Policy Result" and choose wizard to generate a report for the problematic computer and user account (please
place appropriately). (Choose computer and select the proper user in the wizard)
c. Right click the resulting group policy result and click the "Save Report…" => save report to save the report to a HTML
file.
Once you get the report,
you may upload it to the Skydirve and provide me the download link.
In addition, after running GPupdate /force command, please try to logoff and re-logon to see what will happen.
Best regards,
Frank Shen

Error messages: "itunesobjspl/jenetsvc.dll The specified module could not be found." And Error -2032 "Quicktime failed to initialize."

I initially got the Error -2032 message after downloading the newest version of itunes. I read a geek blog that said to uninstall Quicktime and I did that a bunch of times. I also uninstalled and reinstalled itunes repeatedly. None of this works. I noticed that the apple website said the requirements for the new quicktime/itunes download included an intel processor and I have a celeron processor, so I wondered if that was the problem, although everything has been running fine up until now, so I don't know. It also doesn't address the missing .dll file, but I may have accidentally deleted that because I went into the registry to try and unload some Quicktime files when I uninstalled Quicktime. I did this at the suggestion of the blog, but I may have screwed it up. Now I need to repair the missing .dll and still try to get itunes running

ErikEJ wrote:
Have you set your solution target to "Any CPU" ?? If so, set to "x86", as SQL Compact only runs in WoW mode on x64. Or use corflags.exe /32BIT+ against your project output (.exe file).
ErikEJ wrote:
Look at this blog post for a walk-through: http://erikej.blogspot.com/2008/01/x64-and-sql-compact.html
Hello everyone,
I have the same problem as mentioned above "Unable to load DLL 'elev.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E) ", when trying to load the dll file into a window application. I developed a window application in VS2005 and want to import a dll file from another program into my project and use it. But when I try to call one of the function in the dll file, I got the error message "Unable to load dll 'elev.dll". I try all options that say it works to solve this problem, but somehow it doesn't work for me. I put the "elev.dll" file in the bin folder and use P/Invoke to import the dll file into my project. Can anyone help me out with this? thanks and really appreciated!
Here is how I import the dll:
[DllImport(@"D:\elev.dll")]
//[DllImport("emap.dll", SetLastError = true)]
private static extern void EMA_Init();
and in the code, I call the function above but failed to load the dll file
EMA_Init();

IDoc failed with the error massaeg "Instance of object type could not be ch

Hi All
I am getting IDoc failed with the error massaeg "Instance of object type could not be changed"
Message type :PORDCR
Basic type : PORDCR05
Message no. BAPI003
Status : 51
All POs are get uploaded in SAP during Cut over activities only.
Please suggest on this.It will be a great help.
Thanks
Ajit

Hi
After uploading POs into SAP we are changing quantity and value in PO in Legacy system, and for this all IDocs are failed, subsequently these changes are not triggering to ECC.
Please help
Thanks
Ajit

Error message @ Win 7 Pro start up "There was aproblem starting C:\programdata\ofpviaowu.dat - The specified module could not be found."

Error message @ Win 7 Pro start up "There was a problem starting C:\programdata\ofpviaowu.dat - The specified module could not be found."
This error message appears every time I start (boot) my computer and windows starts (Firefox is not running at start up). Firefox 15.01 functions properly otherwise.
This started after I installed the 15.0.1 patch.
I uninstalled and reinstalled Firefox but the problem remains. Google search for "ofpviaowu.dat" came up with "2012-08-29 Firefox Release 15 Startup Crash Report" as the only listing.
Is this a Firefox issue?

hello QAMgr, i'm not aware of this file being a part of firefox & also find it slightly suspicious that there are no more google search hits. maybe this is malware related... could you do a full scan of your system with the security software already in place and/or a different tool like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes]?
[[Troubleshoot Firefox issues caused by malware]]

DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found.

Hello Everyone,
We are getting an error while trying to create an Universe via Microsoft -> MS Analysis Services 2014 -> OLEDB for OLAP Provider under Connection in UDT -"DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found." We have installed BI 4.1 SP05 in our system. As per earlier posts in scn in BO XI 3.x this issue used to be for improper installation of Integration KIT but in our scenarion Integration KIT is within the BO 4.1 package so no seperate installation is required. Moreover I have checked whether all the driver is present under file: "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\dataAccess\connectionServer\drivers" and seems everything is fine. But still I am getting this error. One important point is we could use IDT because in IDT still we don't have option to connect with 'Microsoft Analysis Services - 2014 (XMLA)' as we are using Microsoft Analysis Services 2014 version.
Kindly help if anyone has faced the same problem with SAP BO 4.1.
Thanks and Best Regards,
Ghosal

Hello Everybody,
The problem is solved now after installing "OLEDB drivers from SQL Server 2012 Feature Pack". We had OLEDB drivers that comes directly from SQL Server but that did not worked out in our case.
Thanks for your support.
Best Regards,
Ghosal

Library("???") failed; the specified module could not be found

After Setting up windows 2003 server and setting up the plugin the , I tried to enable it from windows media server , but i faced the following error:the plugin reported an error ... 0xc00d157d
and when i tried to register the libraries at installation folder manually using regsvr32 command , i recieved
library("???") failed; the specified module could not be found
Should I install oracle 9i client on windows 2003 server ???
please reply urgently

Which plugin?
OK, I assume the Microsoft Media server?
Yes, the readme lists oracle9i client is necessary as a minimum... It is used to communicate with the database (although I think it is best to have the DB on the same machine as the MMS Plugin).
9i client is included if your DB is installed on the windowa machine.
Larry

Loadlibrary ("olkexpress5.dll") failed - The specified module could not be found.

About a month ago, the Desk Manager app stopped recognizing that my blackberry was connected via usb so I decided to remove/reinstall the Blackberry Desktop 4.3 software. Now, everytime I install the software I receive the following message during the installation:Errors 1904.Module C:\Program Files\Research In Motion\Blackberry\IS71 Connectors\OE Connector\OLKExpress5.dll failed to register. HRESULT-2147024770. Contact your support personnel. If I try to manually register the file it fails with the following error "Loadlibrary ("olkexpress5.dll") failed - The specified module could not be found." My the desktop manager currently will recognize my blackberry as long as I don't disconnect the blackberry before first powering off the laptop. Any one have any ideas regarding this issue?

Perform clean uninstall of BlackBerry Desktop Software.
Check for instruction: http://www.blackberry.com/btsc/KB02206
After that go to here: http://na.blackberry.com/eng/services/desktop/
and download the latest (v4.7) BlackBerry Desktop Software.
I recommend to download BlackBerry Desktop Software without Media Manager.
Media manager is not necessary to transfer files to the device and vice versa.
Check this link: HOWTO : use your blackberry as a USB device

Loadlibrary failed with error 126 the specified module could not be found

Hello i get this error message at random when am using oracle sql developer, sometimes it comes right after startup, and some times after 5 mins.
the error closes down the program
please help

Searching the web for "loadlibrary failed with error 126 java" seems to point to issues with OpenGL and certain video drivers and/or environments with multiple monitors. Here are several discussions...
https://netbeans.org/bugzilla/show_bug.cgi?id=243153
Error "LoadLibrary failed with error 126: The module could not - Microsoft Community
[SOLVED] Issue with Technic Launcher: Load Library failed with Error 126 - Technic Launcher - Technic Forums
So it seems this issue is not specific to SQL Developer. The last discussion includes a video link in its last post saying that ".dll" is searched for rather than "atioglxx.dll" on 32-bit systems or "atio6axx.dll" on 64-bit system (in the C:\Windows\system32 folder), so a workaround is to copy one of those to ".dll".

Why is file syncing failing due to server error(s)?

I am working on an HTML file inside Edge Code. When I save, it fails due to 'server error' (no other details). I then get multiple 'conflicted copies' of the same file in my cloud directory. I clean this off and try to resave. It saves, then undoes the last few changes! It reverts back to a previous version of the file.
I guess I'll start working with the 'newest' conflicted copy or something. It's ridiculous. There are no internet issues on my end here, either, which is what I thought at first.
Extremely frustrating! I suppose I'm going to work locally, and then just try to sync. the file after I am done (and after I have made a duplicate in case Cloud tries to overwrite and save an older version of the file).
This pretty much makes cloud-based work fairly useless!

File Sync Links that may help... all the links I have, since I don't know the cause of your specific problem
-https://forums.adobe.com/community/creative_cloud/host_sync
-http://helpx.adobe.com/creative-cloud/help/sync-settings.html
-http://helpx.adobe.com/creative-cloud/kb/arent-my-files-syncing.html
-Size Limits https://forums.adobe.com/thread/1488242
-sync and email link http://forums.adobe.com/thread/1427516?tstart=0
-Phantom folder problem https://forums.adobe.com/thread/1490445
-an overview of assets https://assets.adobe.com/files

Encrypting PDF with password. PDF command failed due to PDFlib error: Bad parameter.

I'm trying to encrypt a PDF with a password and receive this error.
~ERROR~com.adobe.document.PDFManipulation~: PDF command failed due to PDFlib error: Bad parameter.
It does not throw an exception, it just logs this error.
Anybody know how to fix this?
Version: 7.0.2
OS: Win

I was also getting this error, when trying to set usage rights on a document and then encrypt it with a password. I found a solution which works (more like a workaround, as this feels like a bug):
1. Open the unprotected file
2. Call pdfDocument.encryptWithPassword()
3. Call pdfDocument.save(), write resulting bytes to temp file
4. Reopen this file with pdfFactory.openPdfWithPassword()
5. Now you can call pdfDocument.setUsageRights() and pdfDocument.save()

Win 7 IE10 "Internet Explorer Branding failed due to the error listed below. The specified procedure could not be found."

Similar Messages

Maybe you are looking for