Window.opener.location.reload(); don't work

I have a jsp page with a table which contains data from a database.
From this page I open a popup window that permits to update these informations.
So from popup window (also jsp page) I submit a servlet and before closing it with wondow.close(), I try to update opener window with:
window.opener.location.reload();
but it sometimes works and sometimes not.
Is there any explanation of this?
Thanks in advance.

Misteries of Javascript.
In fact, I would try to set a javascript timeout before closing the window, but after you have done the refresh...

Similar Messages

HT201412 My i Pad 3 shows "cannot Access Find My Friends open the app and review your sign in information to continue sharing your location. And I have two buttons : Later and Open but they don't work, As long as I have this situation I can do nothing on

My i Pad 3 shows "cannot Access Find My Friends open the app and review your sign in information to continue sharing your location. And I have two buttons : Later and Open but they don't work. As long as I have this screen situation, I cann't do anything on my I Pad. Please help !!

I have the same problem on my iPhone4. It is obviously a bug in the software. Once it pops out I am locked out of my phone. I can't even begin to describe the frustration this causes. All that stuff about holding down the buttons is useless. the phone won't even shut off. I can take a screen shot like that or go to voice control. Even when I got to a wifi connection, I can't get on. This app blocks everything else. This is a serious bug and can have serious consequences. The only thing my phone would do is go to voice control and let me play iTunes or phone people. Some smart phone hey?
I have finally got to a place with a wide enough wifi to connect my computer and restore the phone. This has lasted over a day!
I don't even know why Find My Friends is on my phone. Is it part of the package and how do I turn it off?

Clean Install of Windows 8 & Some buttons Don't Work

I bought this PC with dead Hard Drive. I installed new Drive and Windows 8 from USB.It only installed as 32bit OS and I know it should have been 64bit. Has 4Gb memory installed.Property screen shows: 4.00GB (2.97GB usable)(32bit OS, x64 Processor). Some of my buttons Don't Work nor does my Microphone. I have tried verifying all drivers but none fix buttons. No errors listed in Device Manager. Any help is Appreciated.

Wow that is so a "Canned" response. Can't install Windows7 on a system that never had 7. This unit was made originally for Vista. And even those do not have drivers I could use. Now if there were device manufacturer information you could give me about my unit then maybe I can get the buttons to work. The most important is the Microphone and Volume/mute buttons that need to work then you could help me.The Dell site will give you an exact biuld list when serial or Tag number is provided which help Identify device manufacturer so user can goto their site to get generic drivers to work with their Dell PC regardless of what version of OS is currently installed.So if you can really help here is the PC Info»HP TouchSmart IQ524 Desktop PC
Serial Number: 3CR9240GJN
Product Number: NC701AA

Class unload / reload don't work with JWS

Hi, I wish to know if it's possible in some way unload an used class and reload a new or changed version of the same class from a jar file with JWS.
My program has a controling application part that load with a custom classloader the real working classes from a few others jar files.
Some events make the controling application close and finalize the working classes and download /reload /instantiate the working classes again to get the version.
This approach work fine when the applicaion is started locally with JAVA.EXE , but when it's started with Java Web Start , don't work.
Any help or comments will be appreciated.

Simply don't start the new version, continue to execute the older one until the app exit and JAWS start again.
I'm sure of release all objects loaded from the actual .jar file, clear cache, download the new .jar , reload the classes , but when they are executed it's the same version.
No error or complains.
The aproach to dinamically reload classes it's based in the sample at:
http://javaalmanac.com/egs/java.lang/ReloadClass.html
but with a URLClassLoader as parent class.

Windows 7 mouse gestures don't work with DW and FW

I discovered that the mouse gestures don't work with Dreamweaver CS4 and Fireworks CS4 windows. When I drag a window to the right or left, nothing happen. The gestures words fine with all other programs, even Adobe programs like Photoshop or Lightroom. Can anyone help?

Thanks Robb. I tried those options but it didn't work, but I'm posting here the final resolution in case anyone else encounters the issue.
I had the local desktop support check out his PC and it turns out that the Windows 7 screen resolution was causing the issue. The only reason it was caught is because his desktop sharing software also was not working correctly.
Within the display settings Windows 7 allows you to display text/icons larger without changing the resolution. The user's display was set at 150%. After changing to 100% (default) the desktop sharing and Essbase double clicking are working.

Location services don't work even though they are on

My location services do not work even though they are switched on. When I ask Siri something that requires my location it tells me to turn on location services and Siri but they are already on.

For location the iPod uses the location nearby wifi routers that are in Apple's data base. You do not have to be connect to the router.
Thus, it appears that the router the iPod is using does not have the correct location in Apple's database. Apple continuously updates their database based on data it obtains from iPhones. No one has found a way to tell apple to correct/add a wifi router to their database.
To test this, go to another location/another network like Starbucks and see if location work there

Speed and course methods for location object don't work

I am attempting to use the Location API (JSR 179) to extract the course and speed (getCourse() and getSpeed() of Location object) of the user on a Nokia N95. However, no matter what speed I am travelling at or how good the GPS signal is, NaN is returned. Other fields like latitude and longitude work fine. Why is this? Were these methods never implemented? The problem clearly does not lie with the GPS or the device, as the built-in Symbian applications have no trouble returning course or speed information. Why do these methods not work?

Hello,
Since you provided no code to show what yu are doing, and you don't give any indication of what " i have some troubles" means, I'd Bing "C# playback .vob files".
Also, see
How to ask questions in a technical forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

FireWire on Windows 7 (Boot Camp) don't work

Hi,
I installed Windows 7 on a partition on my Mac (MacBook Pro retina, 15 inch, 2.6, 16 GB ram), for install cubase. I have a Audio Capture (Edriol FA-66), that connect to the computer with FireWire (I have also the Apple Thunderbolt to FireWire Adapter), but when I connect the firewire cabel to the Mac, the windows don't reconize the firewire device. I searched that in the web, but I didn't found my problem (I tried to update the "1394 OHCI Compliant Host Controller" in the manage devices, but I even don't have a "IEEE 1394 Bus host controllers").
I must fix it, because I have to use my Audio Capture (in the cubase).
Tanks for everyone who can help!
Roi!

By golly, this really fixed it.
I can't fathom how the Boot Camp drivers think it's a good idea to not just install all drivers needed for proper operation of the hardware, but apparently so.
In my case I have a Firewire 400 audio card, M-Audio Firewire 410, which M-Audio can't be bothered making drivers for Mac OS X for anymore, and I need to use it for recording vocals next week on the road.
I purchased a Thunderbolt to Firewire 800 adapter with my new MacBook Air 2013, and a Firewire 400 to Firewire 800 cable, and the thing just didn't work when I plugged it in.
I had installed Boot Camp before plugging it in.
I just re-installed all the Boot Camp drivers with the device plugged in, and lo and behold, the device (and the Firewire port in general) was finally recognized.
It works.
Thank you!

Audigy 2 Value and Windows 7 64bit driver don't work

my first Audigy SE before Audigy 2 Value (SB0400) worked perfect on Windows 7 64bit
with Audigy 2 Value SB0400 i tried 3 drivers , including the beta from the creative support , original and daniel_k driver and after reboot the windows hangs at LOGO and stays there.

Re: SB Audigy 2 ZS and Windows 7 - Full Package driver?T While Creative has written new drivers and some applications for Windows 7/Vista for the Audigy, they have not re-written or updated all of the original applications on the CD. This card is very old now. What Daniel K. did was take all of the applications or most of them, and tweaked them to properly install and include themselves in the registry on operating systems other than Windows XP. For the full and most recent package, check here:
http://forums.creative.com/t5/Sound-...009/td-p/53838
If the application you want is not included in his package, then you can try downloading the official Creative version and install it on your system in "compatibility mode" by right clicking the file, and choosing properties, and then the compatibility tab and choosing "Windows XP service pack 2 or 3" and it may or may not function.

Iphone 4s 5.0.1 location services don't work (broken)

Hello, I have an iPhone 4S that orginally came with iOS 5. Initially, the Location Services (GPS) functions were working fine as I played with some apps using them. I think I turned the Location Serivces off to save battery and updated to iOS 5.0.1 directly from the phone. After updating, when turining on the location services, the seetings seem to turn on, but any app using Location Services / GPS (like the built in Maps application) is not able to determine the current position, and no GPS poistions readings at all. Also the purple icon near the clock in the upper bar of the screen isn't ever showing.
Is there anyone else having similar issues?

Many have several issues....
see there https://discussions.apple.com/thread/3482844?start=0&tstart=0
same to me...

TextEdit: Saving and opening menu items don't work

I create a new document, type a couple of sentences. Then when I hit "Save", a dialog box should open where I enter the document name - but nothing happens. The same with the "Save As ..." and the "Open file ..." menu options - no reaction.
It used to work before. What happened?

Does it happen in a different user as well? Does this issue appear in different applications as well?
This article might be helpful: http://docs.info.apple.com/article.html?artnum=25398 (auch in Deutsch verfuegbar).
Cheers
MacMini

Windows Power Management settings don't work with ITunes

Purchased a refurbished Dell Optiplex system a few weeks ago with a 3.2 Ghz Pentium processor, 1 gigabyte of RAM, and 160 GB of hard drive - so a nice, new, fast system running Windows XP.
I set my Power Management settings to go to screen saver after 20 minutes, and power down after 45 minutes. It worked just fine for a month, and the day I downloaded Itunes onto this computer, those settings do not work.
I have reset them.
I have changed them (to as little as one minute).
I have changed them back to the original settings.
I have rebooted my computer.
I have run 2 different spyware programs (Spybot and Adaware) as well as run an anti-virus scan (TrendMicro Housecall).
Nothing has changed, and my only conclusion is that Itunes is somehow interfering with the power settings for my computer and monitor. This is rather frustrating, as I'd like my computer to shut off on its own if someone walks away (I can't trust my kids to log off on their own).
Any ideas on what the problem might be?

Hi, I just bought my iPhone a couple of days ago and am having the same problems.
I have a Macbook at home, but need to be able to sync with my work computer for contacts and calendar. At work I'm running on Windows XP Pro SP 2 and MS Outlook 2003 SP 3. I've made sure to update all MS software. I'm running on iPhone 1.1.3 and iTunes 7.6.
My contacts sync fine, but, so far, no luck with my calendar. I've gone through the trouble of completely deleting everything off my calendar and am trying "test" appointments to no avail. What's really frustrating is that I've logged out of my ID on this computer and logged in using a test ID. I can successfully sync a test appointment following those steps.
Tech support tells me that since I'm successful under those conditions, it must be a corrupt entry on my main calendar. But, as I've mentioned, I deleted everything I can find off my main calendar and am still not able to get it to sync successfully.
This is quite frustrating.

Why safari 5 and itunes 10 don`t work with windows xp?

Some one knows why the mos recent version of safari and itunes don`t work on windows xp?

Define "don't work". Frankly that's about the most vague and useless statement without some clarification.

Problem window.opener.doSubmit

Hello,
We have one application, say with URL
http://localhost/some_app
This is not an APEX application.
On this application on click of a button we popup an APEX page (with public access) and when user clicks on "Ok" button of this APEX page we pop the page down and want
to refresh the original application page. We do this by following javascript function from the APEX page
function close(url) {
window.opener.location.href = decodeBIURL(url);
window.opener.doSubmit('REFRESH');
window.close();
We pass the url of the original application to this APEX page as one of the parameters.
This works fine as long as APEX page has URL of the form http://localhost:8085/apex/f?p=101:3, i.e. original application URL and APEX URL both have same hostname part (in the example above localhost ), but moment they are differnet IE pops up another window for original URL.
does anyone know fix to this problem?
regards, Yora

It is impossible to set the value of the file input thing. But if they realy want it in a popup, then you can try something like this:
-1. Put the attatchement list in a iframe
0. Open the parent file with some with somewhere a unique id (like a session id or something
1. Open your child page in a popup, give that uniqueid as parameter ("like child.jsp?id=<uniqueId>")
2. Use regular file input things in that popup, and replace the 'close' button by a submit button
3. Track the submit of the form, show a 'now uploading to server, please wait' message
4. The child page sends the attatchements to the server, stored in a tempory folder named <uniqueId> (store it in the form as a hidden input thing)
5. When the upload is ready, display some message 'files uploaded, close this window to return to your mail'.
6. When the user clicks that 'close' button, close the popup and then reload the attachment-frame
7. The attachment-frame just lists the files stored in that <sessionid> folder, and it seems like the user has added those files to it
If you want i can create an example of it
koentjepoppe
note: if you add the date to that unique id, you know when that folder is created and then you know wich folders you have to delete if the user aborts his mail for example (then those files are still in that folder wasting space)

Is there a way to get firefox to warn me when exiting with multiple windows open?

When I click File > Exit in the menu, I want firefox to warn me if I have multiple windows open.
I don't want it to warn me about multiple tabs though.
Is there a way to get it to do that?
I would prefer to just hit the red X in the top right corner, which would avoid this problem, However, if it is the only firefox window I have open, then the red X will often not properly shut down firefox exe, so next time I try to launch firefox it won't work and I have to end task on firefox exe! I was told to use File Exit to improve the chances that firefox will properly close, but doing so introduces this new issue.
thanks

That doesn't work.
Once I set it to true, if I have one window open with multiple tabs, and try to exit, it comes up with a warning box, which I don't want.
Then if I check it to say 'don't show this again', the next time I run firefox the showQuitwarning setting has been set back to false. So then when I have multiple windows open and I file exit, all firefox shuts down with no warning.
The reason I want this is because I can *see* the tabs of the window I am in when I am clicking on file|exit, so visually, I'm not going to close anything that I didn't mean to close because it's right there visible to me at the top of the screen (the tabs are seen at the top of the screen) in the same area as where I am looking at and clicking File Exit.
But other firefox windows are not visible up there so it is easy to forget that they are open, since a lot of times I don't have any other windows open (if I *always* had other windows open then I would not forget them and be in more of a practice of checking the taskbar for them)
And this is all because I can't hit the red X in the top right corner without increasing the odds of hung firefox processes that don't truly exit (thus making me unable to start another session later without Ending Task which isn't good).
The hanging is daily but random and not reproducible, so it's very difficult to troubleshoot or fix.

Window.opener.location.reload(); don't work

Similar Messages

Maybe you are looking for