Window repaint failure after switching spaces

Hey there,
i'm having a very strange problem with Spaces on my Macbook Pro Mid 2010. Sometimes when i switch between spaces the window displayed in the space i switched to is not correclty repainted. This only happens when i use the spaces overview and choose a space in the grid. When i switch via CTRL+cursor everything works just fine.
In the attached screenshot you can see the problem i am talking about. Here i was in the space Textmate is in, switched to spaces overview and reselected the Textmate space.
Did any of you have the same problem? Any suggestions how to fix it? Or is it a hardware failure and my graphics card is messed up once again?
Thanks in advance

Humm, yeah, that might be the case! Chrome is running almost all the time, so that could be the case Chrome is causing these glitches.
I will check that out and use Firefox in the meantime. Chrome became quite buggy since the last update, it often has trouble rendering pages properly, the whole process hangs for a few seconds... so this seems quite reasonable!

Similar Messages

Finder window won't resize after switching spaces

I've got my mbp set up with 12 spaces and designate apps to particular spaces.
When I open a new finder window in space 2, I can move it and resize it no problem.
If I then switch to another space and then switch back to space 2, I can't resize the finder window. I can still move it, but just can't resize it.
Does anyone know a way around this bug?
Thanks!

I can also confirm this bug. Finder windows seem to "forget" where they are on the screen. This is very clear when renaming a file: the highlighted, editable filename text shows up some seemingly random distance from the filename displayed in the Finder window.
This can also be seen when using Quick Look. The file zooms to the full Quick Look preview not from the file icon, but from some random point on the screen.
Same goes for dragging and dropping. For example, if you want to drag a file into an existing folder, you have to hover some distance from the actual folder, the same distance you see when you rename a file or use Quick Look. The Finder window doesn't know its position on the screen after using Spaces or Expose.

Catastrophic windows 10 failure after installing virtualbox

Hello,
I recently experienced complete and unrecoverable failure with the TP right after installing virtualbox and restarting my laptop.
The symptoms:
-Black screen with cursor on boot, windows would not load any further after multiple restarts and waiting one hr+
-Unable to recover with the win10 boot disk i made, kept running into errors with any of the available options
After a little bit of internet sleuthing I found a post mentioning that virtualbox resets the networking on the PC, which in turn breaks the TP on reboot, same thing that happened to me.
I'm also unable to reinstall the TP with the win10TP boot usb I created, it keeps saying that none of the partitions match. Right now it looks like I will have to do a full reinstall of win8.1 and load a backup image and restart.
Hopefully this doesn't happen to anyone who wants to use virtualbox with the tech preview

Hi codyvieira,
Thanks for your sharing.
Due to current build is for technical testing, there might be compatibility issue existed between Windows 10 Technical Preview and old software.
We may wait for new version software for Windows 10.
Alex Zhao
TechNet Community Support

After switching from Windows to Mac, my iPod says "No Music"

I have an 80GB iPod Classic. I used to use a Windows machine, but recently switched to a MacBook Pro. Last night, I copied all of my music over to my Mac, and added some new stuff since I have more hard drive space now. I synced the iPod. All of the files are showing up in the iPod file browser within iTunes. So the media is there. However, when the device is ejected, the only media it says is available is photos. Meanwhile, it does say that I have used 68GB.
Although I have never had a problem with the device, I feared there could be a hardware issue, so I ran the onboard diagnostics. The results were:
For Retracts: 9
For Reallocs: 16
These numbers are low, so I don't think it's hard drive failure.
Do I need to do anything to reformat to Mac, other than what I did within iTunes?
Please help. I'm bored and need my iPod to work!
Thanks in advance.

Hi!
Make sure you authorize the new MacBook iTunes first, and you're good to go, no need to reformat! Hope this helps!
Sandygirl

I started Boot Camp on a MAC mini but then had a power failure after 30 secs :( Now when I start Boot Camp the option to install Windows 7 is gone. In it's place is Remove Windows 7. It seems to hang at Partitioning disk Can I recover?

I started Boot Camp on a MAC mini but then had a power failure after 30 secs Now when I start Boot Camp the option to install Windows 7 is gone. In it's place is Remove Windows 7. It seems to hang at Partitioning disk How can I recover?

Welcome to the Apple Support Communities
That's because the Boot Camp volume was created, but your Mac hasn't been set up to start automatically from the Windows disc. Insert the Windows DVD and press C key while your Mac is starting to start Windows installation.
If you want to make sure that everything is correct, open Boot Camp Assistant and choose the option to remove Windows 7. Then, open that application again, select the option to install Windows 7 and you will be able to install Windows as usual

Window order is wrong when switching Spaces

When I switch from one space to anther using the cntl arrow keyboard shortcut the window order in the new space is invariably messed up. It is just the display of the windows though and not the order that the OS thinks they are in.
For example if I switch to a space with Mail.app I often get the main Mail viewer window but if I go into the Window menu the email message I was working on is checked in the menu.
If I switch to a space with two apps the previously frontmost app is no longer displayed as being in front but it is actually still active.
Anyone know what the solution to this problem is?

First off, I meant to title this "When switching spaces application window is not showing."
Just in case anyone else runs into this problem or any other weirdness with switching between spaces, the answer seems to be trashing the com.apple.dock.plist file and then restarting the dock. The preferences file can evidentially get corrupted and create some problems. Spaces does not have it's own plist file but stores it's data in the dock's plist file. Be warned that this will reset all of your dock preferences including which apps you have on the dock.
Mark

Keyframe error after switching my windows to English interface. How do I fix it?

(I got a Keyframe) Error after switching my windows to English interface, I could save and open projects normaly! Unfortunately damaged projects still didn't worked... But the new once are ok, and I hope that error won't happen again! But guys from http://www.premiere-pro
tengo estos errores.
Message was edited by: Kevin Monahan
Reason: Next time create a shorter title, then put the text describing your issue on the next page.

Hi C Del Producciones,
Uninstall iCloud. See this forum post: Debug event f:\mightysilt_win64\shared\adobe\mediacore\mediafoundation\api\inc\keyframe
Thanks,
Kevin

Turning off switch spaces when hovering with a window near screen corner

Hi,
I use Spaces very often, but I absolutely hate that when you move a window near the corners of the screen and hold it there for about 1 second, that you switch spaces. I once found a terminal command which lets you set the delay the OS waits before switching spaces to 1 minute (so it it basically turned off). Now I can't find this site again. Does anyone know what I mean?

This might still work:
http://www.macosxtips.co.uk/index_files/terminal-commands-for-hidden-settings-in -leopard.html
charlie

Unable to switch spaces

Recently, I can't seem to switch Spaces at all despite the fact that it is turned on.
I currently have Spaces turned on, with a few applications set to open in a particular space. For example, I have Finder and the Mail application to open up in space 1, and the web browser (Camino) to open up in space 2, etc.
After logging in, the default space is "1", which is normal. However, from there it will not allow me to switch spaces at all.
None of the following works:
1) Pressing the Control key and the arrow keys
2) Pressing the Control key and a number (1 through 4)
3) Choosing a space from the menu bar
4) Opening an application that will open in another space besides 1 (such as Camino, in my case)
Of those options above, 1-3 just won't do anything. However, opening Camino does open the application (the Menu Bar displays "Camino" and it's menu bar items such as Bookmarks) but the browser window doesn't show up, nor can I manually open one from the File Menu.
The only way to make spaces work at this point is to press F8 (show all Spaces) repeatedly, until all the spaces show up on screen. Once I do this, I can switch Spaces normally.
I'm quite sure that this is an odd and unusual problem, as I don't see any information regarding such behavior.
Help appreciated!
Yoshihide

I gave that a try and all other accounts have Spaces working correctly.
The main differences between the other accounts and my account is that I have a few menu bar items, and startup items installed. So I disabled one of the startup items, "Dashboard KickStart" and all works fine now!
I did a search on the web and yes, Dashboard KickStart does seem to disable Spaces. I suppose I'll have to manually start Dashboard every time I login.
Thanks!
Yoshihide

Offline or Online Backup after switching off and on the archving mode

Hello guys,
I am doing an SAP (on Oracle) upgrade. In the upgrade guide there are two completely different statements about making a backup of the Oracle database during upgrade.
1st statement:
"If you deactivate archiving, you have to make a full backup of the database after the downtime before you switch archiving back on. This must be executed as an offline backup."
2nd statement:
"Backup: Database Was Operated in NOARCHIVELOG Mode
Activate ARCHIVELOG mode again and create a full backup of the database. This must be executed as an offline backup."
Quotes from: "Upgrade GuideSAP ERP 6.0 Including Enhancement Package 4 Support Release 1 ABAPBased on SAP NetWeaver 7.0 Including Enhancement Package"
I understand the fact that the backup has to be offline if you do it before you activate archiving. This is logical.
1) Why does SAP do these two proposals before and after switching on archiving which are completely contrary?
2) Why does the backup has to be offline if you do it after switching on archiving?
May be somebody knows the background for this.
Thanks
Nik

Hi,
Two kind of Recovery play an important role in Database Recovery after DB Restore. The Database recovery can be Compete recovery, point-in-time recovery or partial recovery.
Media Recovery (due to media failure/corruption or loss of Data files) can be performed by applying all Offline Redo Log files which are generated from Online Redo-log file in Archive Mode.
Instance Recovery can be done with the help of Online Redo log file and undo table-space to achieve consistent status of Database. In this recovery the committed transactions (which are logged in Online Redo Log files) are roll forward and the uncomplete transactions (which are also logged in Online Redo Log Files) are rolled back into DB using Undo space info.
If you deactivate archiving, you have to make a full backup of the database after
the downtime before you switch archiving back on. This must be executed as an offline backup.
                   With Archive log Mode , one can deal with Media Recovery and Instance Recovery. Upon deactivating Archive log mode, the Archive log files will not be generated and the circular logging will take place within the group of online redo log files.
                   So, after deactivating Archive Log mode, Its recommended to take immediate offline backup to have consistent Backup copy of Database which may be required to deal with demanded media recovery by restoring that immediate latest offline Backup. If the database operates in NOARCHIVELOG mode, the database can ONLY be completely recovered from instance failure but not from media failure. This means that, in case of media failure you will lose all work done after the last valid offline backup. The database can be backed up only while it is completely closed.
                   Upon media failure after deactivating the Archive log mode (..rare chance, but we can not ignore it...),the complete recovery can not be achieved if the large time gape is there between the last successful offline backup and DB crash because between this time it may be the chance that the Online Redo log files are overwritten so many times in circular manner.

I cannot connect to the internet after switching providers. I've changed the email address associated with the new account but am sure there is something else I need to change. Can anyone help me?

I cannot connect to the internet after switching providers. I've changed the email address associated with the new account but am sure there is something else I need to change.   I have also changed the apple information as well including user name and password. Can anyone help me? (This is an ipad question).

Apple ID: Changing your Apple ID
http://support.apple.com/kb/ht5621
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796?viewlocale=en_US&locale=en_US
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
iOS: Changing the signed-in iTunes Store Apple ID Account
http://support.apple.com/kb/ht1311
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

OS X partition becomes corrupt after switching from Bootcamp

So I've had to reinstall os x 10.9.1 no less than three times this week and multiple times before in the past after switching between os x and windows 8.1. This usually happens after I've been using windows for a prolonged period then switch back to os x but it happened today after reinstalling os x from a time machine backup just yesterday. I'll switch between the two and os x becomes corrupt and begins the loading bar sequence after selecting the os x partition via the refit boot manager. I tried repairing the partition using disk utility from the repair partition and an external installation of os x 10.9.1 but every time the disk becomes corrupt and needs to be wiped and reinstalled or install a time machine backup. I've lost count of how many times I've had to do this and to make things even worse both of my external disks have become corrupt after being disconnected for two days while I sort this mess out. Does anyone else have similar issues or can locate an issue somewhere?

Yeah I reinstalled osx 10.9.1 and installed all my apps, put everything back then used bootcamp to create a partition for windows then used wineclone to install my windows 8.1 backup. I jumped from windows > osx > windows > osx inside an hour to move around a few things and I forgot verify bootcamp after I installed the backup and that last time I booted to osx it was corrupted. I used disk utility from my external installation and the recovery partition and both times they need repaired which only came up with the backup and wipe notification window. There have been two occasions where I was able to fix the osx partition from my external osx installation and continue using osx quite perfectly but usually the partition becomes un-mountable after it fails to repair. Usually when this has happened the twenty something times before it's after a prolonged period of a few weeks using windows.
I'm using refit boot manager and paragon NTFS 11 which may be the only software I've installed that could be corrupting the boot.
SMART status is verified

Blurry font after switching from WinXP to Win 7 (Was:Schrift im Dreamweaver CS 3 verschwommen)

<Preran> For the benefit of moderators here, I used Google to translate your content into English:
Good day,
I have problems with blurry font in Dreamweaver CS3 after switching from Windows XP to Windows 7
I have already tried the following:
In "Edit" Preferences "change font size" - unfortunately that does not work. (which had worked fine in the previous changeover to Windows XP)
Then I got in the forum www. office-loesungen.de the tip, sometimes seen on the control panel display, which percentage is set.
When I got the set to the mean value, the writing was not so blurry, but still not really readable.
Experiments with Clear adjust TypeText were not successful.
There is a trick, so the font is larger
If I have to "small" hinders the size that was at 0.75 in the previous pages, it is readable for me, so I could enter the text and read it.
However, the text is then when uploading larger.
What can I do now?
For speedy help I would be grateful
Best regards
Guten Tag,
ich habe Probleme mit verschwommener Schrift im Dreamweaver CS3 nach der Umstellung von Windows XP auf Windows 7.
Ich habe folgendes schon probiert:
Bei „Bearbeiten“ und Voreinstellungen „Schriftgröße ändern“- das funktioniert leider nicht. (das hatte bei der letzten Umstellung auf Windows XP wunderbar geklappt)
Dann bekam ich im Forum www. office-loesungen.de den Tipp, mal über die Systemsteuerung-Anzeige zu sehen, welcher Prozentwert eingestellt ist.
Als ich den auf den mittleren Wert eingestellt habe, war die Schrift schon nicht mehr ganz so verschwommen, aber immer noch nicht richtig lesbar.
Auch Versuche mit Clear Type Text anpassen waren nicht erfolgreich.
Einen Trick gibt es, wodurch die Schrift größer wird
Wenn ich die Größe, die bei den bisherigen Seiten bei 0,75 lag , auf „klein“ verstelle, ist es für mich lesbar, ich könnte den Text so eingeben und auch lesen.
Allerdings wird der Text dann beim Hochladen auch größer.
Was kann ich jetzt tun?
Für baldige Hilfe wäre ich dankbar
Mit freundlichem Gruss
Renate Gundel

I've done this multiple times and it produces essentially the same message, but there is a mention that a restart is pending. This is also strange because this is definitely not the case. First time I used CScleaner it took a while and was obviously busy correcting something. However now when I select clean all, it simply dumps anopther massive log file into AppData and says cleaning completed successfully. Now I just ran it again, so would you like me to post the more recent log file?

[SOLVED]X start failure after upgrade: dri3,present modules missing

I start X with ~.xinitrc from console, which won"t work after last upgrade --first in two weeks.
(EE) Server terminated with error (1).Closing log file.
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: server error
Xorg.log.0 :
[51:778] (EE) intel: Failed to load module "dri3" (module does not exist, 0)
[51:779] (EE) intel: Failed to load module "present" (module does not exist, 0)
Installed packages (EDIT: completed):
xf86-video-intel-2.99.{914-4,916-1}-i686 and also tried with xf86-video-intel-git, with "SNA" acceleration.
intel-dri 10-2.7-3
dri2proto 2.8-2
dri3proto 1.0-1
xf86driproto 2.1.1-3
Linux 3.15.5-2-ARCH i686
Linux CK Atom 3.16.2-1
Issue occurred after upgrading from v2.99.912-1 to v2.99.914+. I was going to try downgrade xf86-video-intel to v2.99.912-1 (as in the first thread in Refs) but went in a dependency conflict, with the older intel driver requiring glamor-egl which conflicts with xorg-server ':-|
Atom netbook
lspci:
00:02.0 VGA compatible controller: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller
Some refs :
» [SOLVED] X start failure after upgrade https://bbs.archlinux.org/viewtopic.php?pid=1426837
» [Solved] xf86-video-Intel-2.99.912-1 breaks xorg https://bbs.archlinux.org/viewtopic.php?id=182932
Last edited by kozaki (2014-09-12 09:45:53)

The issue occurred after upgrading from xf86-video-intel-v2.99.912-1 to v2.99.914+ and xorg-server-1.15.2-1 to 1.16.0-6 (and -devel).
same issue if:
- Switching accelaration method to "UXA" as per https://bugs.archlinux.org/task/40860
- Adding Option "DRI" "False"
Digged a bit:
- same modules errors but appears to be a Gnome bug (X starts): https://bbs.archlinux.org/viewtopic.php?pid=1441716
- same modules errors but X starts up without problems http://www.linuxquestions.org/questions … 175511372/
makes me doubt if this issue is related to the modules not found. Which is the single indication I found so far x-/
Any light on where can the issue comes from? hardware is pretty much standard even if getting a bit old. Never had Xorg related issue so far on this pancake.
Last edited by kozaki (2014-09-11 11:05:42)

Ace probe failure after IIS app pool recycle?

Windows Server 2003 SP2
ACE Module A2(1.6a)
I suspect this is caused by an IIS6 setting, but posting here in case anyone has seen this. For this one particular site, we have 4 servers in the farm. 2 of those servers are fine. The other 2 (new) servers will generate probe failure after the site's app pool recycles. I then remove the 2 servers from service and re-activate (no inservice, then inservice) and the probe comes back as operational. It appears that the app pool recycle somehow is resetting the hash on the default page, though I'm not sure how. Any ideas are very much appreciated.

Yeah, the hash is inside the probe. Here's the config for the serverfarm and the probe. Public-007 and Public-008 are new servers...the other 6 have been in the farm for the last 2.5 years and they don't have this issue. It's only the 2 new boxes that the probe fails when the app pool is recycled.
serverfarm host PUBLIC
probe URL-DEFAULT-ASPX
rserver PUBLIC-001
    inservice
rserver PUBLIC-002
    inservice
rserver PUBLIC-003
    inservice
rserver PUBLIC-004
    inservice
rserver PUBLIC-005
    inservice
rserver PUBLIC-006
    inservice
rserver PUBLIC-007
    inservice
rserver PUBLIC-008
    inservice
probe http URL-DEFAULT-ASPX
interval 2
faildetect 2
passdetect interval 2
passdetect count 2
request method get url /default.aspx
expect status 200 200
hash

Window repaint failure after switching spaces

Similar Messages

Maybe you are looking for