I started Boot Camp on a MAC mini but then had a power failure after 30 secs :( Now when I start Boot Camp the option to install Windows 7 is gone. In it's place is Remove Windows 7. It seems to hang at Partitioning disk Can I recover?
I started Boot Camp on a MAC mini but then had a power failure after 30 secs Now when I start Boot Camp the option to install Windows 7 is gone. In it's place is Remove Windows 7. It seems to hang at Partitioning disk How can I recover?
Welcome to the Apple Support Communities
That's because the Boot Camp volume was created, but your Mac hasn't been set up to start automatically from the Windows disc. Insert the Windows DVD and press C key while your Mac is starting to start Windows installation.
If you want to make sure that everything is correct, open Boot Camp Assistant and choose the option to remove Windows 7. Then, open that application again, select the option to install Windows 7 and you will be able to install Windows as usual
Similar Messages
-
My mac mini only shows a steady power light and fan noise when powered up. No video or sound and no commumication with wired keyboard or optical mouse. Tried replacing internal battery and resetting PMU/SMC but nothing seemed to happen. Any suggestions? Many thanks! Richard
You've already done the two things I would have suggested.
If your Mini has an internal battery then I assume it's a G4. That means you've gotten a lot of good years of service from it, and it's old enough that it's certainly not covered by AppleCare anymore, and it's probably not worth spending money trying to repair it.
You should be able to tear it apart using instructions from ifixit.com to get the hard drive out, and then put the hard drive into a nice USB or FireWire enclosure (I like the ones from Other World Computing, macsales.com) so you can transfer your data to a replacement Mac.
I hope someone has another suggestion for you. -
I read ICloud has a program you can download to be able to use it for messages on a Windows machine but it still requires that you already established an account on an Apple device with Operating System 5 on higher and I prefer an option without installing anything to have easy access when going to a cyber or internet cafe. The ME site refers you to ICloud but that fails to help me.
My Mac Mini is basically new with a one year warranty with free support ( ??? ) and maybe I can call a technical support center but international calls could be costly from here so this is my last resort.
A Apple store is nowhere to be found in this country so I hope to gain as much advice as possible from here.I appreciate your reply Ralph but I got no way of using an APPLE device with operating system 5 or better because the internet cafe and hotels here use Windows computers as mentioned the first time. The Icloud instructions for a Microsoft machine still require you to initialize the account on a Macintosh prior to being able to use it on other electronics.
-
I have used Bootcamp to install Windows 7 on my new Mac OS X Lion. Now, when I start my computer it starts directly with Windows. No way to get back to Mac
I have used Bootcamp to install Windows 7 on my new Mac OS X Lion. Now, when I start my computer it starts directly with Windows. No way to get back to Mac
-
How can I boot and run my Mac Mini on my 12" PwrBk display using firewire?
How can I boot and run my Mac Mini on my 12" PwrBk display using firewire?
bwhit:
Welcome to Apple Discussions.
No reason why you should not be able to do it using Firewire Target Disk Mode. Here's what you do:
1. With both computers shut down connect both via firewire.
2. Startup the Mini and hold down "T" key immediately after chime.
3. Startup the PB and immediately after chime hold down Option key.
4. Select second HDD icon on the screen and click on the right pointing arrow.
5. Computer will boot from Mini's HDD.
Be sure to shut down PB completely before shutting down Mini.
Please do post back with an update or with further questions or comments.
Cheers
cornelius -
I erased my windows partition using disk utility then realized I should have used boot camp, because now I can't resize the original partition and seem to be stuck with a ghost unusable space. Boot Camp now doesn't give me the option to install or remove windows partition.
Hi, Ralph,
The problem is that I did erase the partition, using disk utility, but I can't go back to my original disk size pre-partition, as disk utility won't let me do it and gives the message "Couldn’t modify partition map because file system verification failed." When I try to use Boot Camp Assistant it won't let me select the third option to remove windows. -
Boot manager not loading Mac Mini
I just bought a seagate wireless plus hard drive and during the installation it came up with a question " will I use mac only or mac and pc to install date onto drive. And I clicked mac and pc. Little did I know it created a PARAGON partition NTFS. Now my computer won't boot up. Can anyway lead me into the right direction. I have a Mac Mini. Wireless keyboard and Magic Mouse.
I now wish I selected mac only on that drive installation.
And have read in other problems that I will need a cable mouse and keyboard to get it working.
I don't really want the partition on the hard drive, especially if its going to affect every time I turn it on.
Can apple please help?? AnyoneI removed the wireless hard drive....and it still wouldn't boot up.....
I did need a wired keyboard.....
I found a solution and it worked for me......
http://youtu.be/0D4C-A-qIrk
All good now..... -
I changed permission setting on main disk...took forever now when I bootup I get the chime...apple icon...fan noise...thats it...internal drive is broken...no Mac install disk..I have a windows XP desktop with installation disk..if I was to get external drive ...could I use windows XP styartup disk just to boot the "17"Powerbook-G4...have no intention of downloading XP on the Mac...just want to boot it up...or is there a way to boot the Mac from the XP desktop...cables...etc?
Hi Romko23, just pasted info from manual...PowerBook G4 "17" 5.3
Your PowerBook comes with a minimum of 512 megabytes (MB) of 533
MHz Double Data Rate (DDR2) Synchronous Dynamic Random-Access Memory
(SDRAM) installed. Both memory slots can accept an SDRAM module that meets the
following specifications:
 Double Data Rate Small Outline Dual Inline Memory Module (DDR SO-DIMM) format
 1.25 inch or smaller
 512 MB or 1 gigabyte (GB)
 200-pin
 PC2-4200 DDR2 533 MHz Type RAM
PS my keyboad is loose...I tighten the tiny screws...only...once ...tried all the key-strokes...Comand-option..P-R.....safe-mode... etc...Mac only reacted ...once...right after.. I tightend K-board >>C-OpT- P-R...mac chimed twice...the Apple icon in grey screen got smaller....now after trying ...keyboard .boot short cuts 10 times..nothing...it chimes ...grey screen....apple in window...fan noice ....thats it...do you think I need to tighten screws...again,
I actually think when I was changing permissions...on entire it was taking so ong...20 min...I just hit power,,shut it down...when it wasn't done...no patience.,...just thought of something ...sounds important...whern I resgisted on this site..I tried to use my Powrbook login name ..got message.... .. blocked...Secury problem....that has to be the problem..blocked..how do I unblock?
Message was edited by: CMK1 -
Boot camp wont show the option for installing via iso file
version 5.0.2(462)
the boot camp doesnt show the option to install the windows via iso file
i wanna install windows 7 via an iso file
plz help me as soon as possibleThat option is only available for Macs without a built-in SuperDrive (the MacBook Air, Mid 2011 and newer Mac minis, the Late 2012 iMac, and the MacBook Pro with Retina display).
If you haven't got one of those computers and Boot Camp Assistant doesn't show the option to install Windows 7 from a ISO file, your Mac doesn't support the Windows installation from a USB because it's restricted by firmware to a Mac without a SuperDrive. In this case, you have to buy Windows 7 on a DVD from eBay or Amazon, and use it to install Windows through Boot Camp.
If you still wants to install Windows from a ISO file, the only option is to install it on a virtual machine, using an application like Parallels, VMware Fusion or VirtualBox -
FCP runs on Intel Mac Mini, but won't capture to external drive, HELP!!
Installed FCP 5.1 on Mac Mini Core Duo and it runs fine. It will capture fine too, but only to the main harddrive. If I plug in a firewire harddrive using a firewire hub it won't capture, and give a "No Video" error in the Log and Capture window. I've used both popwered and unpowered firewire hubs, and even tried daisy chaining the camcorder off the harddrive. Nothing has worked. And there is no space on the main harddrive to capture to.
I know there is a lot of speculation about whether FCP would even run on a Mini, but it will. If only I could capture it would be a reat capturing station. Has anyone had success? Its pretty frustrating as I've used the Power PC Mac Mini for capturing in FCP 5.0 without any problems. Why would apple make the new Mini crapier?Never use FW hubs when capturing video. They only lead to grief.
Some cameras, particularly Canons, refuse to share the FW bus with anything. Could this be your problem?
If so, there is little I can think of to do with a Mini (or an iMac for that matter) beyond capturing from a different deck/camera that is more social than the Canons and their brethren. You only get the one FW bus.
But first thing to try is to get rid of the hub. Hook your fw drive to the computer and your camera to the FW drive.
Post back,
Patrick -
FCP runs on Intel Mac Mini but Won't capture, HELP!
Installed FCP 5.1 on Mac Mini Core Duo and it runs fine. It will capture fine too, but only to the main harddrive. If I plug in a firewire harddrive using a firewire hub it won't capture, and give a "No Video" error in the Log and Capture window. I've used both popwered and unpowered firewire hubs, and even tried daisy chaining the camcorder off the harddrive. Nothing has worked. And there is no space on the main harddrive to capture to.
I know there is a lot of speculation about whether FCP would even run on a Mini, but it will. If only I could capture it would be a reat capturing station. Has anyone had success? Its pretty frustrating as I've used the Power PC Mac Mini for capturing in FCP 5.0 without any problems. Why would apple make the new Mini crapier?
Intel mini core duo Mac OS X (10.4.6)I would recommend you post your topic in the Final Cut Pro forum. However, since the Intel-based Mac mini is not supported, it may simply not work.
-Doug -
I am considering purchasing the Mac mini for home studio audio production using Adobe Audition and a USB microphone. Will the base mini model run these programs?
The base mini has 4GB and a 5400 RPM hard drive. It is slow to start up and slow to launch large application such as Word (and I'd assume Adobe Audition) due to the slow drive. I've not used a new 4GB model, just the 8GB model, and the 8GB model (except for the slow drive) handles everything I've thrown at it, including running Photoshop, Word, Safari, and Mail at the same time but there is sometimes a delay switching between programs as the swapfile is updated. Overall I was not happy with the 5400 RPM drive (perhaps because I have MBA and iMac with Fusion drive) so I eventually upgraded it with an SSD. Now the mini is truly a warrior.
-
I run a Mac Mini 10.6.1 and a G5 10.4.11 - they share a screen. Yesterday the contrast on the Mac Mini went mad. Very very heavy contrast and now its impossible to retouch with Photoshop as I cannot judge the colours accuratly. The G5 is fine. I keep the screen image I get on the G5 good and accurate with Huey. I believe I cannot use this with the "Intel Inside" Mac Mini. Does anyone know how I can restore the great screen image I got up to yesterday on my Mac Mini? Thanks. John Suffolk England.
Likely caused by one of the following: a bad cable, maybe a bad connection or (my guess) bad graphics hardware.
To rule out the software, see if booting from an installer DVD shows better color.
Swap the cables and check the connections.
Then call your hardware support provider. -
Attempted update to iTunes 10.5.2 failed on my Windows XP system. Now my phone is not recognized. I tried installing manually. I tried to repair using Add/Remove programs. Still get errors.
Try doing it in a WIndows Safe mode - Restart computer and hit F8 key right after your see BIOS check and choose "Safe mode with networking"
Do the SFC /SCANNOW again.
If that does not work, whilst in safe mode, download Free Malwarebyte software from CNET's Download.com. Install, update virus definition then perform a full scan. Remove if it did find some viruses or trojans. Restart computer.
Back to regular windows, do the SFC /SCANNOW again.
If that doesnot work, check to see if your Hard drive has errors or bad sectors
GO START BUTTON /COMPUTER, right mouse click OS (C:) and choose "Properties"
Choose "Tools" tab and under error checking, click "Check Now".
Make sure "Scan for and attempt recovery of bad sectors" is checked and click start.
Restart windows will perform the above task to fix errors This may take hours depends on how big is your Hard Drive
Good Luck!!. -
hi i got a mac mini but when i connect it to my smartax mt882 modem via ethernet it says device not connected can anyone solve this issue it work fine with the usb connection but the ethernet is giving me problems plz help
Hello, give this a try...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK.
Maybe you are looking for
-
Need Help With Drivers for 488ca
Hi I'm having nothing buy trouble I have a designjet 488ca and for the life of me can't down lode the soft ware they no longer make the CD and this thing is just keep going around with the same old crap I would be glad to pay for the CD if they just
-
I just woke my MacBook Pro 17 HD screen and got this. The VM had just been down loaded. http://www.flickr.com/photos/payers/sets/72157614881393766/ Does this look like the symptom of the nvidia graphics card failing...8600nividia Put the compter back
-
Info: We use a Kramer 719 switcher/scaler, Toshiba 2800 DVD player and a computer with the same output resolution as the Kramer 719 (1024x768). Can I (and should I) increase resolution of a FC3 project if I'm playing it from the DVD player? What abou
-
16.10.2007 Hi friends, Other than PMIN is there any other way by which I can enter the minimum price of a material and check the same while creating sales documents. Regards, Udaynath.
-
Code works in the real world - fails in the emulator
If you want to test this try http://hatemytory.com/java/deploy.wml Anyway, my code loads an image over the network using http. This (appears) to work fine in the real world but in the WTK emulator it chokes by only downloading the first 16358 bytes o