Window to set repeat value.

Hello Applescripters. I'm looking for a way to have an apple script run as an application, and in doing so when run it will 1st show a small window that asks for a repeat value. Then with this value runs the script x number of times as told. My repeat value I have is as such…
set frontmost to true
end tell
repeat 1 times
keystroke (ASCII character 30) --go up…
1: How can I script a window to display when the applescript application is clicked?
2: How can I script the window to take the number entered and make it the number of times the script is to repeat itself?
Any help is greatly appreciated,
Maximilian

Hello kel,
That was an impressive script thank you. I tested it out as is with the beeps and it seemed to work exactly like I wanted. However when I inserted…
display dialog "Enter a digit:" default answer ""
set t to text returned of result
set i to t as integer
repeat i times
[My script]
end repeat
My script into the script it just gave me beeps as it ran through. But I figured out that my script needed the front most Finder widow to be active. So I threw tell application "Finder"
activate
select Finder window 1
end tell
just before
[My script] and it worked perfectly!
Thanks a lot for that,
Maximilian

Similar Messages

How to hide PNP selection windows and set default values for PNP.

Hi expert,
I am using HR logical database PNP, but I don't want to display selection windoes for running program on PNP, whereas I want to set default value for some selection items in the program. could you please tell me how to get those two targets?
Many Thanks,

Hi
You have mentioned 2 things.
1. Don't want selection windows for running program for PNP - this can be achieved using the HR Report category - You can get more details on HR Report Category on
HR Report Category
2. I want to set default value for some selection items - This you need to achieve in initialization event of your program.
How you can get this can be explained by INITIALIZATION (SAP Library - ABAP Programming (BC-ABA))
Thanks,
Sreeram

Open File dialog window when setting the value of a path type input argument in a VI call

Hi,
I am new to TestStand (running 4.0) and I want to create a sequence of VIs to turn on, setup and measure a device. One of my VIs sends a configuration file to my device. An input argument to this VI is the path of the config file. I would like to make it simple to modify this path when setting up the sequence by popping up the File Open dialog window and choose my file. Is this possible? I do not want to manually change the file during execution, just to have multiple calls of one VI, each call opening a different file according to the path given to it during the setup.
So far I have only succeeded in manually entering the absolute path each time I add this step. What makes it even more annoying is the fact that LabVIEW interprets the path with the escape codes, rendering the path unusable. Manually adding a 2nd backslash at each '\' occurence adds another step to the process. I tried both String and Path type of inputs, and the SearchandReplace() or ToUpper() (trying to bypass the escape codes) functions in TestStand don't seem to help m.
Your help is very much appreciated,
Fred

Eudaemonic,
If you want to create a series of easy to configure step types so others can develop sequence files easily, you could use custom step types. When you create a custom step type you implement your own configuration dialog. Since you have control over what controls you expose in your configuration dialog, you can design it so the desired path is selected using a open file dialog. Refer to chapter 13 of the TestStand reference manual for more information about custom step types.
If you do not want to create a custom step type but you still want to give access to your sequence developers to pre-configured steps, you can use templates. A step template is a snapshot of a step that you can reuse later. Let's assume that instead of asking your users to edit the step to enter the desired path, you create several step templates with different pre-configured paths and based on their applications requirements they could use the appropriate template. Refer to the NI TestStand Help for more information about the Templates list on the Insertion Palette.
Hope it helps.
Antonio Lie.

I have SSRS parametarized report in that one data set have repeated values with query parameter . but while am mapping that query parameter to report parameter i need to pass distinct values. How can i resolve this

I have SSRS parametarized report in that one data set have repeated values with query parameter . but while am mapping that query
parameter to report parameter i need to pass distinct values. How can i resolve this

Hi nancharaiah,
If I understand correctly, you want to pass distinct values to report parameter. In Reporting Service, there are only three methods for parameter's Available Values:
None
Specify values
Get values from a query
If we utilize the third option that get values from a dataset query, then the all available values are from the returns of the dataset. So if we want to pass distinct values from a dataset, we need to make the dataset returns distinct values. The following
sample is for your reference:
Select distinct field_name from table_name
If you have any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

I'm trying to set the value of a textfield to a instance of another textfield in a repeating subform

Hello all,
I am trying set the value of a textfield in a repeating subform/table row to another textfield in a repeating subform with the corrosponding instance number.
The user enters a list of Key Activities in the first part: -- KeyActivityRow is the repeating subform --
xfa.resolveNode("form1.#subform.KeyActivities.Row1.Table2.KeyActivityRow.Cell2")
-- KeyActivityRow is the repeating subform --
Which then Populates the corresponding occurence of: --
xfa.resolveNode("form1.#subform.ActivityTable.HeaderRow.Table1.HeaderRow.Cell1")
-- ActivityTable is the repeating subform --
Kevin

In the calculate event of form1.#subform.ActivityTable.HeaderRow.Table1.HeaderR ow.Cell1 enter this script in Language:JavaScript :
this.rawValue=xfa.resolveNode("form1.#subform.KeyActivities.Row1.Table2.KeyActivityRow["+A ctivityTable.index+"].Cell2").rawValue
Kyle

Removing repeat value in smartforms different window

when i am using this code in smart forms with code option and using these( wjominy-VERWMERKM ,WJOMINY-ORIGINAL_INPUT) variable in ten different window for taking output for different condition the value showing in ten different window is right means if ten different value is coming it should show all value in ten different window but if only one value is available it should show only once .
but this code is showing one value in all window means it is repeating single value in all widndow but my requirement is it should show only once if it is repeat value .
pls help me in solving this issue.
CLEAR : IQAMV,IQAMR.
LOOP AT IQAMV.
IF IQAMV-VERWMERKM = 'J_1.5' OR IQAMV-VERWMERKM = 'J_3'
OR IQAMV-VERWMERKM = 'J_4'    OR IQAMV-VERWMERKM = 'J_5'
OR IQAMV-VERWMERKM = 'J_7'    OR IQAMV-VERWMERKM = 'J_8'
OR IQAMV-VERWMERKM = 'J_9'    OR IQAMV-VERWMERKM = 'J_10'
OR IQAMV-VERWMERKM = 'J_11'   OR IQAMV-VERWMERKM = 'J_13'
OR IQAMV-VERWMERKM = 'J_15'   OR IQAMV-VERWMERKM = 'J_20'
OR IQAMV-VERWMERKM = 'J_25'   OR IQAMV-VERWMERKM = 'J_30'
OR IQAMV-VERWMERKM = 'J_35'   OR IQAMV-VERWMERKM = 'J_40'
OR IQAMV-VERWMERKM = 'J_50'   OR IQAMV-VERWMERKM = 'J_1/16'
OR IQAMV-VERWMERKM = 'J_3/16' OR IQAMV-VERWMERKM = 'J_4/16'
OR IQAMV-VERWMERKM = 'J_6/16' OR IQAMV-VERWMERKM = 'J_7/16'
OR IQAMV-VERWMERKM = 'J_2'    OR IQAMV-VERWMERKM = 'J_5/16'
OR IQAMV-VERWMERKM = 'J_8/16' OR IQAMV-VERWMERKM = 'J_9/16'
OR IQAMV-VERWMERKM = 'J_6'    OR IQAMV-VERWMERKM = 'J_10/16'
READ TABLE IQAMR WITH KEY MERKNR = IQAMV-MERKNR.
IF SY-SUBRC = 0.
IF IQAMR-ORIGINAL_INPUT IS NOT INITIAL.
replace '_' in IQAMV-VERWMERKM with '=' .
wjominy-VERWMERKM = IQAMV-VERWMERKM.
WJOMINY-ORIGINAL_INPUT = IQAMR-ORIGINAL_INPUT.
APPEND WJOMINY TO IJOMINY.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.

thanks jayathi.
BTW did you test this example with records exceeding single page.I actually coded the table in the same manner.But it does not work.
Anyhow, i solved the problem using a work around. I added a window to the next page with check box 'not on first page ' ticked.

Error: OQ78YWIW when repeating values in a pivot

All,
I'm receiving the following error on a pivot table:
Assertion failure: rTotalPosition.tCellInfo.iLayerCell != rTotalPosition.tCellInfo.iEndLayerCell at line 310 of e:\views_e\nightly\sun\10134\windows\vobs\080726.1900\analytics_web\main\project\webpivotview\edgeiteratordef.h
Error Details
Error Codes: OQ78YWIW
I get this when I set the column's value suppression to 'Repeat' - customer's request. I don't have this problem when the value suppresion is set to 'Suppress' (the 'Default').
The pivot has 4 columns in the rows, 3 of which have subtotals.
Any suggestion?
Thanks in advance!

Thanks for the reply, KK.
I might have missed the point on something reading the link article, but, the article is suggesting how to select multiple columns in the column selector view. I'm just getting the error with a simple pivot with subtotals that have repeating values set for some of the four columns in the 'row' portion of the pivot.

Mobile List Bind aggregation - repeated values?

Hi all, i'm new to SAPui5 so please forgive me if this is already discussed.
I'm calling a odata service (http://h03zdb.hcc.uni-magdeburg.de:8003/workshop/sessiona/12/Services/msgTab.xsodata/MSGTABLE?$filter=FROM%20eq%20%27STU…) and I get the values stored in a table in json. I want to show this in a list but there are repeated values created for the list. Is it because of bindAggregation?

Here is the whole code.
I used split app and added two models for the detail and master page.
I'm very new to this so sorry for bad coding
<html>
<head>
<meta http-equiv="X-UA-Compatible" content="IE=edge" />
<title>SRH Chat</title>
<script src="/sap/ui5/1/resources/sap-ui-core.js"
id="sap-ui-bootstrap"
data-sap-ui-libs="sap.m"
data-sap-ui-theme="sap_bluecrystal">
</script>

<script type="text/javascript">
var sessionKey = "STUDENT01";
// Login user to get session id
var oDetailPage2 = new sap.m.Page("detail2");
var url = "http://h03zdb.hcc.uni-magdeburg.de:8003/workshop/sessiona/12/Services/msgTab.xsodata/MSGTABLE?$filter=TO%20eq%20%27"+sessionKey+"%27%20&%20FROM%20eq%20%27"+sessionKey+"%27%20&$format=json";
$.get( url, function(data1) {
// create JSON model instance
var oModel = new sap.ui.model.json.JSONModel();
// set the data for the model
oModel.setData(data1);
// set the model to the core
oMasterPage1.setModel(oModel);
var contactList = new sap.m.List("newlist2",{
title : "{FROM}",
mode: sap.m.ListMode.SingleSelectMaster,
            select: function(oEv) {
var item = oEv.getParameter("listItem");
var desc = item.getTitle();
retrieveMsgs(desc);
function retrieveMsgs(desc)
var aurl = "http://h03zdb.hcc.uni-magdeburg.de:8003/workshop/sessiona/12/Services/msgTab.xsodata/MSGTABLE?$filter=FROM%20eq%20%27"+desc+"%27%20&$format=json";
$.get( aurl, function( data ) {
// // create JSON model instance
var oModel1 = new sap.ui.model.json.JSONModel();
// // set the data for the model
oModel1.setData(data);
// set the model to the core
oDetailPage2.setModel(oModel1);
var contactList1 = new sap.m.List("newlist");
var inputField = new sap.m.TextArea();
var but1 = new sap.m.Button({text: "Send", tap: function(){
// Send button press functionality
var msg = inputField.getValue();
var murl = "http://h03zdb.hcc.uni-magdeburg.de:8003/workshop/sessiona/12/WebContent/InsertMsg.xsjs?from="+desc+"&to="+sessionKey+"&msg="+msg;
$.ajax({
        url: murl,
        type: 'POST',
        async: false,
        timeout: 30000,
        success : function (data2){
        var empty = "";
        inputField.setValue(empty);    // clear text area
//Populate the List with Data from the Model (Set in the Controller of this View)
contactList1.bindAggregation("items", {
path : "/d/results", //Reference to the JSON structure
template: new sap.m.StandardListItem({
title: "{FROM}", //Refer the name field in the JSON data
description: "{MSG}", //Address Field in the data
type: sap.m.ListType.Navigation //Specify what to do while clicking/tapping an item in the list, in this example navigate to another view
oDetailPage2.addContent(contactList1);
oDetailPage2.addContent(inputField);
oDetailPage2.addContent(but1);
oSplitApp.to("detail2");
//Populate the List with Data from the Model (Set in the Controller of this View)
//oModel.createBindingContext("/d/results", null, {select: "FROM"},function(a){});
contactList.bindAggregation("items", {
path : "/d/results", //Reference to the JSON structure
template: new sap.m.StandardListItem({
title: "{FROM}", //Refer the name field in the JSON data
//description: "{FROM}", //Address Field in the data
//select: "FROM,TO",
type: sap.m.ListType.Navigation //Specify what to do while clicking/tapping an item in the list, in this example navigate to another view
var oMasterPage1 = new sap.m.Page("master1",{
    title : "Master"
// adding the list to master
oMasterPage1.addContent(contactList);
// //add the master pages to the splitapp control
oSplitApp.addMasterPage(oMasterPage1);
//   .addMasterPage(oMasterPage1);
//add the detail pages to the splitapp control
oSplitApp.addDetailPage(oDetailPage2);
//oSplitApp.setInitialDetail("detail");
//oSplitApp.setInitialMaster("master");
oSplitApp.placeAt("body");
</script>
</head>
<body class="body">
<div id="body">
</div>
</body>
</html>

ALV: How do I suppress repeating values and page breaks on printed output?

Good day, everyone!
First, I've done a LOT of searching trying to find the answer to my question, but I'm not finding an answer. If this has already been answered and you can point me to a URL, I would appreciate it.
Here's my issue: I have a rather simple ALV report. It has the columns of Person ID, Personnel Number, For Period, In Period, and Amount. I sort by Person ID and Personnel Number, and if the value repeats on the next line of the report, I want to suppress it (make it blank).
I thought the answer was in the following code, where I set the GROUP attribute to asterisk:
CLEAR sortcat_ln.
sortcat_ln-spos      = '1'.
sortcat_ln-fieldname = 'PERSONID_EXT'.
sortcat_ln-up        = c_true.
sortcat_ln-group     = '*'.
APPEND sortcat_ln TO sortcat.
CLEAR sortcat_ln.
sortcat_ln-spos      = '2'.
sortcat_ln-fieldname = 'PERNR'.
sortcat_ln-up        = c_true.
sortcat_ln-group     = '*'.
APPEND sortcat_ln TO sortcat.
It looks PERFECT on the screen -- the values are suppressed if they repeat, and everything appears together on one screen. However, when I print the report, two things happen: 1) The values repeat on each row, even if they are the same, and 2) I get a page break after each Person ID / Personnel Number combination.
I now realize that I can't use the GROUP attribute. Is there some other way in ALV to blank these repeating values and keep all the rows together on one page, rather than page breaking after each value change?
Thanks!
Dave

Hi
Same requirement i had before, when i try to print preview. the output of the grid display is in grouping is ok, but when i print preview or print it doesnt cater the grouping and page breaks, so what i did i modify the internal table use in alv , after hitting the print preview/print with the format desired by the user. you can do that in user-command. see code below
FORM user_command USING r_ucomm TYPE syucomm
                        rs_selfield TYPE slis_selfield.
DATA lt_sort TYPE lvc_t_sort.
CASE r_ucomm.
    WHEN '&RNT_PREV' OR '&RNT'.
      t_final_x[] = t_final[].
      PERFORM clear_redundant.
      PERFORM set_sort_criteria USING lt_sort.
    WHEN '&F03' OR '&PRINT_BACK_PREVIEW'.
      t_final[] = t_final_x[].
    WHEN OTHERS.
ENDCASE.
ENDFORM.                    "user_command
hope it helps

How do I set the value of a dynamic row text field

I have a repeated row form which contains a button and multiple text fields. There is a text field (Input Data Field) further up with some information I want to place in the table and multiple buttons that I want to read the value of and set to the table. I apologize there are multiple questions I have and I am using pseudocode to describe it.
Top form looks like
InputField
| ButtonX1 | ButtonY1 | DescriptionX1 (read only Text Field)
| ButtonXn | ButtonY1 | DescriptionXn
OutputRow looks like
| ButtonOutput | OutputField1 | OutputField2 | OutputField3 |
So I would like it to do
ButtonX1.click
OutputTable.OutputRow.addInstance(true) //this works - everything else I have questions on
OutputTable.OutputRow.OutputField1.rawValue = DescriptionX1.rawValue
Question 1
How do I address the location in each table to set a value
Question 2
How do I get the value of the description field in the same table and row as the button
I would like to say something to the effect of OutputTable.OutputRow[??].OutputField1.rawValue = this.parent.DescriptionX
OutputTable.OutputRow.OutputField2 = InputField.rawValue
Same question as above - how do I specify a dynamic row - is this the proper syntax for getting the value from the input field?
OutputTable.OutputRow.OutputField3 = this.ButtonLabel
Question 3
How can I get the value of the button's label to set in the field
There should be very many of these buttons and buttons will be added - I would prefer to set the value based on the button's label to make the value easier - not requiring changing the code
Question 4 - unrelated to those above.
Is it possible to build the first table
| ButtonX | ButtonY | Description |
from an XML File. I have seen examples of how to build if it is just data, but can the XML be pushed into a form with code to do the above actions?

Each object in a form must have a unique name. I doing so it is not neccessarily the name but the path or SomExpression associated with that object that must be unique. In your case you have a Table.Row.object configuration. The Row is the part that is repeating so to give each object a unique name an instance number is placed on the repeating part. So objects in the 1st row woudl be Table.Row[0].object...objects in the second row woudl be Table.Row[1].object etc .....You can see this by adding a debug instruction on the Enter event of the description field. Put the code app.alert(this.somExpression) and when you enter the field you will see what the somExpression is. Do this for a few rows and you will see the pattern (don't forget to remove the debug code from the enter event). Now you know what you have to use to address the fields. If no instance is given it is assumed to be 0 ..that is why only the 1st row is being affected.
So now to answer your questions:
Question1: The square bracket notation is an issue for javascript (this is the notation for an array) so we have to use a different means of addressing the field to include the instance number. So to address the Description in the 3rd row we woudl use:
xfa.resolveNode("Table.Row[2].Description").rawValue = "This is my new description";
Note that the instance number is 2 for the 3rd row because the instance numbers are 0 based.
Question2. The resolveNode notation allows you to pass a string so you can also concatinate expressions to make the string. If you are writing code on a button in the same row you can get the instance that you are on by using the expression this.parent.index. The "this" portion refers to the current object (the button) and the parent.index gets you th eindex of the Buttons parent. If the button is embedded deeper in a hierarchy then you can continue to add parent indicators until you get back to the node that you want. So rewriting your expression from Q1 it woudl be:
xfa.resolveNode("Table.Row[" + this.parent.index + "].Description").rawValue = "This is my new description";
Question3: The buttons caption can be retrieved by using ButtonName.caption.value.text.value
Question4: When you say build from an XML file. What are you expecting to come from the XML file? The caption that goes on the button? Typically the XML file carries data (not to say that it cannot carry other things). Just need a bit of clarification on this one first.
Hope that helps
Paul

How to Insert more than one record at a time- with fixed set of values in one field

Can someone guide as to how to insert multiple records at a time using ASP VBScript in Dreamweaver CS4 or ADDT.
If someone can guide then the exact problem is given below.
I have a MS access database with one table. The table has three fields. The first field is an autonumber field for ID number.
The second field contains string values- One out of 7 predefined values. One set of records consists of 7 records containing all the seven types of predefined values in fields no 1.
The third field is a numeric field and can contain integers.
I want that the user can enter data for the table using an ASP form in such a way that he enters one set of records at a time in one single screen. This way he will not have to remember that he has /has not entered all the seven set of values for the field no 1.
I am not creating fields with the 7 types of field1value as their names as it will increase the number of fields drastically.
Please help for dreamweaver ASP VBScript.

I have successfully inserted seven records in one form submit operation by looping through the command object execute method.
However, the data that is being inserted by the command object is repetition of the first record and the command object is not taking any data from the text boxes for the second record onwards. In this I had used the isert record behavious generated by DW CS4 and modified it to suit my requirement. However, the data inserted in the first row is getting repeated in all the seven rows.
Please help.
Also advise if there are any free dreamweaver server side validation extensions available.

Error window while changing the value in SelectOneChoice.

Hi I am facing a problem on change of values in SelectOneChoice, "ERROR For input string: "N"
Below is how i am implementing SelectOneChoice:
I am creating values for SelectOneChoice in a Java class:
*SelectItem itemY=new SelectItem();*
*itemY.setLabel("Yes");*
*itemY.setValue("Y");*
*confirmation.add(itemY);*
*SelectItem itemN=new SelectItem();*
*itemN.setLabel("No");*
*itemN.setValue("N");*
*confirmation.add(itemN);*
Using this values in JSFF like this:
*<af:selectOneChoice value="#{bindings.confURLSubmitted.inputValue}"*
*label="Conference Website URL Submitted"*
*required="#{bindings.confURLSubmitted.hints.mandatory}"*
*shortDesc="#{bindings.confURLSubmitted.hints.tooltip}"*
*binding="#{backingBeanScope.EditComplianceDetails.confURLSubmitted}"*
*id="confURLSubmitted"*
*unselectedLabel="Select One"*
*autoSubmit="true"*
*valueChangeListener="#{backingBeanScope.EditComplianceDetails.OnConfURLSubChange}">*
*<f:selectItems value="#{pageFlowScope.generalLists.confirmation}"*
*binding="#{backingBeanScope.EditComplianceDetails.si1}"*
*id="si1"/>*
*</af:selectOneChoice>*
And in bean method i am trying to print the selected value in SelectOneChoice:
*public void OnConfURLSubChange(ValueChangeEvent valueChangeEvent) {*
*// Add event code here...*
*System.out.println("this.confURLSubmitted.getValue() "+this.confURLSubmitted.getValue());*
Now when i try to change the value in SelectOneChoice:
I am getting an error window "ERROR For input string: "N"
Any idea y i am getting this error.
Thanks in Advance

Remove selectOneChoice value binding and set static value and try
*<af:selectOneChoice value="XXX"*
label="Conference Website URL Submitted"
required="#{bindings.confURLSubmitted.hints.mandatory}"
shortDesc="#{bindings.confURLSubmitted.hints.tooltip}"
binding="#{backingBeanScope.EditComplianceDetails.confURLSubmitted}"
id="confURLSubmitted"
unselectedLabel="Select One"
autoSubmit="true"
valueChangeListener="#{backingBeanScope.EditComplianceDetails.OnConfURLSubChange}">
<f:selectItems value="#{pageFlowScope.generalLists.confirmation}"
binding="#{backingBeanScope.EditComplianceDetails.si1}"
id="si1"/>
</af:selectOneChoice>

Javascript to set slider value with System Events

If I open System Preferences and run this in Script Editor, it fails. It sets the volume to zero, not 50%.
var se = Application("System Events");
var spp = se.processes["System Preferences"];
var curr = spp.windows[0].sliders[0].value();
console.log("Current value: " + curr + " - " + typeof(curr));
spp.windows[0].sliders[0].value = 0.5
var curr = spp.windows[0].sliders[0].value();
console.log("Current value: " + curr + " - " + typeof(curr));
But the same thing in AppleScript seems to work fine.
tell application "System Events"
   tell process "System Preferences"
   set v to value of slider 0 of window 0
   log v
   set value of slider 0 of window 0 to 0.5
   end tell
end tell
Anyone know what the problem is?
thanks,
Rob

Jon Handy wrote:
Hello,
You should use something like this within the link attribute for that report column.
onClick="javascript:setItem('P48_RECEIPT_ID',#RECEIPT_ID#);"As noted above, it is not considered good practice in this forum to post unnecessary follow-ups to long expired threads and users. It's worse to do so with information that is inaccurate or incomplete.
What is the purpose of <tt>javascript:</tt> in this code?
What is <tt>setItem</tt>? It is not a standard APEX JavaScript API method.
You're welcome to get involved in the forum, but why make your first post an inaccurate response to a random 6 month old post that is only one of hundreds/thousands of questions on setting an item value using JavaScript?

Web Report - Hide Repeated Values

My web report hides repeated values regardless of the query setting.
Is there any way to set a specific column to not hide repeated values? Using the table API?
Thanks!

dear Kenneth,
have you try to remove the check mark of properties 'suppress repeated text' in 'specific' section of your web item 'table' in web template ?
or you can give parameter SUPPRESS_REPETITION_TEXTS for web item 'table' with value blank
<param name='SUPPRESS_REPETITION_TEXTS' value=' '>
doc may useful
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/13dc9190-0201-0010-71a4-a9f56cdfcc72
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b1089290-0201-0010-288c-98e4d26487ee
hope this helps.

Plsss help me: how to set default values in html:file and html:radio

Hai,
To set default value to text box i use the following code. It works well.
<html:text property="modifyserverdesc" value="<%= serverDesc%>" styleClass="text" size="38"/>But for file i use the code
<html:file styleClass="file" property="modifyserverimgfile" value="<%= serverImage%>" size="40"/>It doesn't display value. What is problem here?
how to set default selection in <html:radio>.

No it won't help.
You can't set a value into an <input type="file"> control at all. The user has to put values in themselves.
The reason behind this is security. If the programmer could put any value they liked in there, you could upload any file at all from a users computer without their intervention. eg C:\windows\system32\passwords.txt
Bottom line: you can't put a default value into the input type="file" control.
And a good thing too ;-)

Window to set repeat value.

Similar Messages

Maybe you are looking for