Removing repeat value in smartforms different window

when i am using this code in smart forms with code option and using these( wjominy-VERWMERKM ,WJOMINY-ORIGINAL_INPUT) variable in ten different window for taking output for different condition the value showing in ten different window is right means if ten different value is coming it should show all value in ten different window but if only one value is available it should show only once .
but this code is showing one value in all window means it is repeating single value in all widndow but my requirement is it should show only once if it is repeat value .
pls help me in solving this issue.
CLEAR : IQAMV,IQAMR.
LOOP AT IQAMV.
IF IQAMV-VERWMERKM = 'J_1.5' OR IQAMV-VERWMERKM = 'J_3'
OR IQAMV-VERWMERKM = 'J_4'    OR IQAMV-VERWMERKM = 'J_5'
OR IQAMV-VERWMERKM = 'J_7'    OR IQAMV-VERWMERKM = 'J_8'
OR IQAMV-VERWMERKM = 'J_9'    OR IQAMV-VERWMERKM = 'J_10'
OR IQAMV-VERWMERKM = 'J_11'   OR IQAMV-VERWMERKM = 'J_13'
OR IQAMV-VERWMERKM = 'J_15'   OR IQAMV-VERWMERKM = 'J_20'
OR IQAMV-VERWMERKM = 'J_25'   OR IQAMV-VERWMERKM = 'J_30'
OR IQAMV-VERWMERKM = 'J_35'   OR IQAMV-VERWMERKM = 'J_40'
OR IQAMV-VERWMERKM = 'J_50'   OR IQAMV-VERWMERKM = 'J_1/16'
OR IQAMV-VERWMERKM = 'J_3/16' OR IQAMV-VERWMERKM = 'J_4/16'
OR IQAMV-VERWMERKM = 'J_6/16' OR IQAMV-VERWMERKM = 'J_7/16'
OR IQAMV-VERWMERKM = 'J_2'    OR IQAMV-VERWMERKM = 'J_5/16'
OR IQAMV-VERWMERKM = 'J_8/16' OR IQAMV-VERWMERKM = 'J_9/16'
OR IQAMV-VERWMERKM = 'J_6'    OR IQAMV-VERWMERKM = 'J_10/16'
READ TABLE IQAMR WITH KEY MERKNR = IQAMV-MERKNR.
IF SY-SUBRC = 0.
IF IQAMR-ORIGINAL_INPUT IS NOT INITIAL.
replace '_' in IQAMV-VERWMERKM with '=' .
wjominy-VERWMERKM = IQAMV-VERWMERKM.
WJOMINY-ORIGINAL_INPUT = IQAMR-ORIGINAL_INPUT.
APPEND WJOMINY TO IJOMINY.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.

thanks jayathi.
BTW did you test this example with records exceeding single page.I actually coded the table in the same manner.But it does not work.
Anyhow, i solved the problem using a work around. I added a window to the next page with check box 'not on first page ' ticked.

Similar Messages

How to remove repeated values

How to remove the repetition of values for a particular column ?
eg:
      product brand date
      laptop     hp      8/1/2013
      laptop     dell     8/1/2013
      laptop     hp       8/1/2013
I don't want " laptop" to appear thrice

Hi,
Go to Product Column Properties >> click on column format >> there u can see two radio buttons Suppress and Repeat >> click on suppress radio button >>
click OK >> click on results tab >> there u can see the only one laptop under product column.
Mark If Helpful/correct.
Thanks.

How to delete repeated values in smartforms

Hi
im using smartform.....
im getting the correct value, but whenever there is a blank value , then it is taking previous value instead of blank data...
how to come out of this problem?
Regards
Smitha

Hi Smitha,
It seems you are not clearing the variable or structure of that field.
Please clear it before the ENDLOOP.(If loop is used).
Regards,
Vimal.

Windows App Certification Kit - Test Fails for Validate Desktop App at "Write appropriate Add/Remove Program values"

Hi,
I am trying to validate a .Net Framework 4 WinForms application for use in the Microsoft Partner Network portal.
I am using Windows App Certification Kit 3.4 for Windows 8.1 , and the Validate Desktop App option.
To build the package I am using InstallShield 2012 SPR Limited Edition (for Visual Studio), and the validation fails
only with the following error (please also see the attached image):
Clean reversible install test: Failed to Write appropriate Add/Remove Program values
Error Found: The registry population test detected the following error: app didn't create the required registry entries.
A non-optional value 'DisplayName' is missing or invalid (same for 'Publisher', 'ProductVersion')
Please note that I have filled in all the publisher/product details in the InstallShield project, on the General Information page.
Also I have tried to use the Microsoft Visual Studio Installer Project for VS2013, and the validation failed with the exact same error.
(https://visualstudiogallery.msdn.microsoft.com/9abe329c-9bba-44a1-be59-0fbf6151054d)
Any help would be very appreciated.
Thank you.

You may need to add the necessary info to the app’s Windows Installer package so it can configure Add/Remove Programs in Control Panel correctly. Setting these properties automatically writes the corresponding values into the registry. From the picture,
you are missing some necessary information about your desktop app.
Also You need the correct admin permissions to write to the registry.
Please refer to this thread:
http://stackoverflow.com/questions/21182856/windows-app-certification-kit-test-result-app-didnt-create-the-require-regist
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Window to set repeat value.

Hello Applescripters. I'm looking for a way to have an apple script run as an application, and in doing so when run it will 1st show a small window that asks for a repeat value. Then with this value runs the script x number of times as told. My repeat value I have is as such…
set frontmost to true
end tell
repeat 1 times
keystroke (ASCII character 30) --go up…
1: How can I script a window to display when the applescript application is clicked?
2: How can I script the window to take the number entered and make it the number of times the script is to repeat itself?
Any help is greatly appreciated,
Maximilian

Hello kel,
That was an impressive script thank you. I tested it out as is with the beeps and it seemed to work exactly like I wanted. However when I inserted…
display dialog "Enter a digit:" default answer ""
set t to text returned of result
set i to t as integer
repeat i times
[My script]
end repeat
My script into the script it just gave me beeps as it ran through. But I figured out that my script needed the front most Finder widow to be active. So I threw tell application "Finder"
activate
select Finder window 1
end tell
just before
[My script] and it worked perfectly!
Thanks a lot for that,
Maximilian

Pass values between views of different window

Hello Experts,
I am a newbie in ABAP Webdynpro. I have 2 views in 2 different windows. I want to pass values calculated from one view to the other view. But i cannot connect the views.
If the views were within the same window, I could connect them using inbound and oubound plugs with parameters. However in this case i am unable to establish the navigation link between these 2 views.
Has anyone of you experts come across such kind of requirement? If so, can you please guide how to connect the 2 views?
Thanks and regards,
Nitish.

Everyone,
I was finally able to connect the 2 views by using the component controller.
I created an attribute on the context of the component controller and read/set of the attribute of component controller on the button click event.
To access the attribute of the component controller, please find below a code snippet which was useful to me:
Data declaration for accessing the component controller
DATA:
       lo_component     type REF TO if_wd_component,
       lo_context       type REF TO if_wd_context,
       lo_controller    type REF TO if_wd_controller,
       lo_node          type ref to if_wd_context_node,
       lo_child         type REF TO if_wd_context_node.
DATA lo_el_test_depts TYPE REF TO if_wd_context_element.
get component controller API
lo_component = wd_comp_controller->wd_get_api( ).
lo_controller ?= lo_component.
accessing the context of the component controller
CALL METHOD lo_controller->get_context
   RECEIVING
   context = lo_context.
lo_context is the required context, from here we can manipulate its components
get to the root node in context of component controller
lo_node = lo_context->root_node.
using lo_node i was able to read and write to the attribute i created in component controller.
Thank you all for your help.
Nitish.
Edited by: Nitu_0105 on Apr 8, 2011 3:29 PM

AP Divs (layers) move when I open my website on different window size.

First of all, this is my first time trying to make a website.
I'm doing an assignment for my class and i found it difficult for me to fix. I have spend 4-5 hours researching online but nothing work for me.
Well,the problem is the AP Divs (layers) move when I open my website on different window size(iphone,ipad).
The website only look right on 1366 x 786 resolution. Please take a look at my 2 pics below:
And I don't know how to make the website to fit on the iphone and ipad so that I don't have to scroll down or sroll to the right to view the whole thing.
Please someone help me!
The code:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <meta name="viewport" content="width=device-width" />
<title>Boston Green Community College</title>
<style type="text/css">

</style></head>
<body>
<div class="container">
<div class="header"><a href="#"><img src="Pictures/34d-1.png" alt="Insert Logo Here" name="Insert_logo" width="619" height="90" id="Insert_logo" style="background-color: #C6D580; display:block;" />
    <div id="apDiv11"><font color="#f4f1f1">
<script type="text/javascript">
var d=new Date()
var weekday=new Array("Sunday","Monday","Tuesday","Wednesday","Thursday","Friday","Saturday")
var monthname=new Array("Jan","Feb","Mar","Apr","May","Jun","Jul","Aug","Sep","Oct","Nov","Dec")
document.write(weekday[d.getDay()] + " ")
document.write(d.getDate() + ". ")
document.write(monthname[d.getMonth()] + " ")
document.write(d.getFullYear())
</script></font>
</div>
    <div id="apDiv1">


<form name="cse" id="searchbox_demo" action="http://www.google.com/cse">
<input type="hidden" name="cref" value="" />
<input type="hidden" name="ie" value="utf-8" />
<input type="hidden" name="hl" value="" />
<input name="q" type="text" size="40" />
<input type="submit" name="sa" value="Search" />
</form>
<script type="text/javascript" src="http://www.google.com/cse/tools/onthefly?form=searchbox_demo&lang="></script>
                              </div>
                                </div>
<div class="content">
    <center><img src="Pictures/DFDF11.png" width="959" height="556" longdesc="Pictures/junior-2-960x.jpg" /></h1></center>
</div>
<div class="footer">
     <img src="Pictures/RRR1.png" width="202" height="70" />
     <div id="apDiv3">
       <p> </p>
       <p><a href="Job.html">Jobs</a>         </p>
       <p><a href="Art Gallery.html">Art Gallery</a>         </p>
       <p><a href="Contact us.html">Contact Us </a></p>
    </div>
    <div id="apDiv4"><center>
<P>About</P>
<a href="visiting.html">visiting</a> | <a href="Map.html">maps </a>| <P><a href="About.html">about BGCC</a></P>
<P>Academic</P>
<P><a href="Courses.html">schools+courses</a></P>
<P>Admissions </P>
<P><a href="cost & aid basics.html">cost & aid basics </a>| <a href="Apply now.html">join BGCC</a>
<P>Studen Life</P>
<P><a href="Athletics.html">Athletics</a></P>
<P>Greenforce Education</P>
<P><a href="Career.html">career center</a></P>
</center> </div>
     <p><font size="2" color="black">BGCC | 99 GreenField | Boston, MA 02199 |617-0101-1000| TTY 617-0202-9944|</font></p>
    <div id="apDiv9"><a href="Donate.html" target="_blank"><a href="Donate.html"><img src="Pictures/three-green-logo.jpg" width="218" height="99" longdesc="Pictures/three-green-logo.jpg" /></div>
    <div id="apDiv8"><a href="Apply now.html" target="_blank"><a href="Apply now.html">
<img border="0" src="Pictures/cxgvxdvxgd.jpg" alt="Apply Now" width="218" height="99"></a></div>
</div>
</div>
</body>
</html>

That's what APDivs do. This is the single most common problem new people have with web page layouts. DO NOT use positioning. You don't need it. Start over. Learn to use CSS floats, margins and padding to align elements.
Below is a basic HTML5 Layout. View source in browser to see the code.
http://www.alt-web.com/sandbox/HTML5-BasicLayout.html
Nancy O.

Smartform : Main window : Want to increase the size of main window

Dear Sir,
In my smartform my Main window is fixed after four windows(2 + 2) but only in first page.
Now my requirement is there in second page i am only showing two windows out of four and in new vaccent space produced by two window i wanted to increase the height of window equal to 2 window in second page onwards.
Please guide.
With Rgds,
Nirav Parekh

You just need to change the UPPER and HEIGHT values for the MAIN window on the second and subsequent pages. Presumably, you have a different page definition for these pages? If that's not your question, then please re-phrase it.

Adobe forms: Displaying work area data in different windows

Hi,
I have a requirement of showing work area data in different windows i.e work area which has sent from program needs to come in different windows of the form. I have created a smartform which will perfectly doing the above logic. The above work area also contains amount fields. I am also passing language 'English' or 'French', based on this i am displaying some texts also.
But Client wants to see the same requirement in Adobe forms. Ao i am new to Adobe forms, I need some help for performing the above scenario. I am doing my research on this. But i want to know the steps which will not reduce the performance.
In smartform, first window contains personnel no from work area and the second window contains address from work area. Then i have created a template with employee premium amount column, company premium amount column and total of that, all these from work area. So work area will contain only one row which i have to show in different window and on template.
In Adobe forms, How can i do the same this which i have done in smart forms.
Please suggest me any one in doing this. I appreciate your answers.
Thanks,
s.vikgnesh

Hi,
Yes as Santoosh said there is no such wiondow option in Adobe forms.
But if you use webdynpro java/Abap we can acheive this.
think something like this below, if it works.
have 2 views 1st for the adobe form, 2nd view in a new window for the work area screen.
in the adobe view have a button for the work area and respective event handler.
in the event handler call this window, and then reload the same adobe form.
if from the work area form if you need value to be passed to this adobe form. have a event handler for this.
when purpose is done, close that window and set value to the required context field on the form. and reload that adobe form.
this is a fuzzy process and time consuming, unless business has no other option we dont go this approach.
but for sure this works, we did the same for a EHS process.
Cheers,
Sai

Removing duplicate values from selectOneChoice bound to List Iterator

I'm trying to remove duplicate values from a selectOneChoice that i have. The component binds back to a List Iterator on the pageDefinition.
I have a table on a JSF page with 5 columns; the table is bound to a method iterator on the pageDef. Then above the table, there are 5 separate selectOneChoice components each one of which is bound to the result set of the table's iterator. So this means that each selectOneChoice only contains vales corresponding to the columns in the table which it represents.
The selectOneChoice components are part of a search facility and allow the user to select values from them and restrict the results that are returned. The concept is fine and i works. However if i have repeating values in the selectOneChoice (which is inevitable given its bound to the table column result set), then i need to remove them. I can remove null values or empty strings using expression language in the rendered attribute as shown:
<af:forEach var="item"
items="#{bindings.XXXX.items}">
<af:selectItem label="#{item.label}" value="#{item.label}"
rendered="#{item.label != ''}"/>
</af:forEach>
But i dont know how i can remove duplicate values easily. I know i can programatically do it in a backing bean etc.... but i want to know if there is perhaps some EL that might do it or another setting that ADF gives which can overcome this.
Any help would be appreciated.
Kind Regards

Hi,
It'll be little difficult removing duplicates and keeping the context as it is with exixting standard functions. Removing duplicates irrespective of context changes, we can do with available functions. Please try with this UDF code which may help you...
source>sort>UDF-->Target
execution type of UDF is Allvalues of a context.
public void UDF(String[] var1, ResultList result, Container container) throws StreamTransformationException{
ArrayList aList = new ArrayList();
aList.add(var1(0));
result.addValue(var1(0));
for(int i=1; i<var1.length; i++){
if(aList.contains(var1(i)))
continue;
else{
aList.add(var1(i));
result.addValue(var1(i));
Regards,
Priyanka

Getting values from a running window

has anyone ever used a program that could retrieve values from an opened window? I have this poker calculator program that can get values from an open poker window. It has a list of about 50 different types of windows (exes, iexplorer, different sites etc.).
Is there any simple way in java of doing something like this?

its not done by a screenshot, because you just give
it the window's title. It works even if its
minimized.At least in Windows, if you have the window's title then you can get a link to the application and you can find out all sorts of information about it. So your conclusion that screenshots aren't involved isn't correct. They may or may not be involved. But this access is done by a native Windows API and Java doesn't support that.

I am using Windows 8 with iTunes. How do I manage iTunes with two different Windows User Accounts?

I have recently bought a laptop running Windows 8 and downloaded iTunes. I subscribe to iTunes Match and have a large amount of purchased music and imported CDs, along with some films purchased from iTunes.
I have downloaded all of the music and the films to the laptop using iTunes Match when logged in under my User Account in Windows 8. However, when we switch to my girlfriend's User Account, she can load up iTunes but all the music and films have the cloud symbol on them indicating that they need to be downloaded
Is is necessary to download everything to the computer twice (I can't really believe this is the answer) or are we missing something in terms of using iTunes with two different User Accounts?
Thank you.

Step 1
Create a new user account on your device. For Mac users, choose “System Preferences” from the Apple Menu and navigate to the “View” menu. Click on “Accounts” and select the “+” button to add a new user account to your machine. Edit the user information and grant any relevant privileges by following the on-screen prompts.
For Windows users, click on the Windows "Start" button, select “Control Panel” and choose “Add or Remove User Accounts.” A new window will open. Click “Create a New Account.” Name the account and set any relevant privileges by following the on-screen prompts.
Step 2
Sign in to the new user account you created.
Step 3
Open iTunes and click “Sign in.” Enter your Apple ID and password and log in.
Step 4
Download purchases through the iTunes store. All files related to these purchases are stored under the separate user account, thus separating both iTunes accounts and their libraries on the same computer.
Step 5
You can share music from both libraries by dragging your music library to a publicly accessible location on your computer. Click “Preferences” from the iTunes menu and deselect “Copy files to iTunes Media Library when adding to library file.” Add the shared folder to your library from the “File” menu.
Tip
Create more than one library from the same user account by deselecting “Copy files to iTunes Media Library when adding to library file” from the “Preferences” menu. Add the files you want to iTunes by dragging and dropping or by opening from the “File” menu and sync your device to that library. Quit iTunes after the sync and reopen iTunes while holding the "Shift" key in Windows or the "Option" key on a Mac.
(tour du lịch nước ngoài)

I want to triple boot Have Snow Leopard and XP on separate drives and I want Windows 7 on another drive, can it be done by temporarily removing the xp drive and installing windows 7 on another internal drive?

I want to triple boot my Mac Pro I have Snow Leopard and XP on separate drives (osx on drive 1, xp on drive 2) and I want Windows 7 on another drive (drive 4, drive 3 is used by osx for storage), can it be done by temporarily removing the xp drive and installing windows 7 on drive 4?
I realise bootcamp only allows 2 operating systems and refit could change the size of my current xp drive to accomodate W7, that is not an option here for various reasons one being the drive is pretty much at capacity with only about 30gig free (I work with video so that free space fluctautes quite a bit). I have a brand new drive 4 with 1TB set aside ready for W7 but I'm unsure how to go ahead?
any help or advice would be really appreciated, thanks

Boot Camp is used to support Windows on the same drive.
You can have a different OS on every drive.
You could have Windows 7, Vista, and XP all on one drive if you so choose.
I recommend not putting Windows and OS X on the same dirve when talking about Mac Pro - unless you just need something small and lite.
Remove all your other drives while you install Windows 7.
You could even relocate XP - if you need it even - or recover the hard drive space.
You should always keep 30% free for Mac OS; same for data/media drives.
Considering 1.5TB WD Black $110.... and you want OS X to be on a fast high performance drive as well.

Web Report - Hide Repeated Values

My web report hides repeated values regardless of the query setting.
Is there any way to set a specific column to not hide repeated values? Using the table API?
Thanks!

dear Kenneth,
have you try to remove the check mark of properties 'suppress repeated text' in 'specific' section of your web item 'table' in web template ?
or you can give parameter SUPPRESS_REPETITION_TEXTS for web item 'table' with value blank
<param name='SUPPRESS_REPETITION_TEXTS' value=' '>
doc may useful
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/13dc9190-0201-0010-71a4-a9f56cdfcc72
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b1089290-0201-0010-288c-98e4d26487ee
hope this helps.

XMLAGG repeating values

Hello, I've just started working with xml and am trying to merge 2 xml documents into a single document.
The XmlAgg query is repeating the some of the data from the first xmltable.
I've created a small example of what I am trying to do (is very basic example)
            Select XMLELEMENT("Questionaire",
                      Xmlagg(
                        XMLELEMENT("Questions",
                          Xmlconcat(
                            Xmlforest(Question_Nbr As "QuestionNumber"
                                    , Question_Type As "QuestionType"
                                    , Question_Asked As "QuestionAsked")
                                    , Xmlelement("QuestionAnswer",Question_Ans)
                                   ))Order By Id)) QT
            From (Select Qt.Id, Qa.Question_Nbr, Qt.Question_Type, Qt.Question_Asked, Qa.Question_Ans
                  From Xmltable ('/Test/Questions/question' Passing Xmltype('<Test><Questions><question><type>general</type><asked>Are you ok</asked></question><question><type>specific</type><asked>Do you know why not working</asked></question></Questions></Test>')
                          COLUMNS
                              Id For Ordinality
                            , Question_Type Varchar2(100) Path 'type'
                            , Question_Asked varchar2(100) path 'asked') Qt
                  inner join   XMLTABLE ('/Results/question' PASSING XMLTYPE('<Results><question><nbr>1</nbr><ans>Yes</ans></question><question><nbr>2</nbr><ans>No</ans></question></Results>')
                          COLUMNS
                              Id For Ordinality
                            , Question_Nbr Number Path 'nbr'
                            , Question_Ans varchar2(100) path 'ans') Qa
                  ON Qt.Id = Qa.Id);produces the following: QuestionNumber is 2 in both Questions/QuestionNumber (more nodes = more repeated values)
<Questionaire>
<Questions>
    <QuestionNumber>2</QuestionNumber>
    <QuestionType>general</QuestionType>
    <QuestionAsked>Are you ok</QuestionAsked>
    <QuestionAnswer>Yes</QuestionAnswer>
</Questions>
<Questions>
    <QuestionNumber>2</QuestionNumber>
    <QuestionType>specific</QuestionType>
    <QuestionAsked>Do you know why not working</QuestionAsked>
    <QuestionAnswer>No</QuestionAnswer>
</Questions>
</Questionaire>Running the inner query produces 2 rows with the correct data.
Select Qt.Id, Qa.Question_Nbr, Qt.Question_Type, Qt.Question_Asked, Qa.Question_Ans
                  From Xmltable ('/Test/Questions/question' Passing Xmltype('<Test><Questions><question><type>general</type><asked>Are you ok</asked></question><question><type>specific</type><asked>Do you know why not working</asked></question></Questions></Test>')
                          COLUMNS
                              Id For Ordinality
                            , Question_Type Varchar2(100) Path 'type'
                            , Question_Asked varchar2(100) path 'asked') Qt
                  inner join   XMLTABLE ('/Results/question' PASSING XMLTYPE('<Results><question><nbr>1</nbr><ans>Yes</ans></question><question><nbr>2</nbr><ans>No</ans></question></Results>')
                          COLUMNS
                              Id For Ordinality
                            , Question_Nbr Number Path 'nbr'
                            , Question_Ans varchar2(100) path 'ans') Qa
                  ON Qt.Id = Qa.IdQUESTION_NBR | QUESTION_TYPE | QUESTION_ASKED | QUESTION_ANS
1 | general | Are you ok | Yes
2 | specific | Do you know why not working | no
database version:
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
PL/SQL Release 11.1.0.7.0 - Production
"CORE     11.1.0.7.0     Production"
TNS for Linux: Version 11.1.0.7.0 - Production
NLSRTL Version 11.1.0.7.0 - Production
Can anyone point out where my query has gone wrong.
Thanks
Mike.

Hi Mike,
Your query is OK and I don't reproduce on versions 10.2.0.5 and 11.2.0.2, so unless you're not telling us everything it must be a bug in your version.
I'm just stabbing in the dark but try removing XMLConcat, you don't need it here :
Select XMLELEMENT("Questionaire",
         Xmlagg(
           XMLELEMENT("Questions",
             Xmlforest(Question_Nbr As "QuestionNumber"
                     , Question_Type As "QuestionType"
                     , Question_Asked As "QuestionAsked"
                     , Question_Ans as "QuestionAnswer")
            ) Order By Id
        ) QT
From (
...Alternatively, a single XQuery should do the job too :
SQL> SELECT XMLSerialize(document qt as clob indent) qt
2 FROM XMLTable(
3 '<Questionaire>
4   {
5     for $i at $qn in $qst/Test/Questions/question
6       , $j at $rn in $res/Results/question
7     where $rn = $qn
8     return element Questions {
9       element QuestionNumber {data($j/nbr)}
10     , element QuestionType   {data($i/type)}
11     , element QuestionAsked {data($i/asked)}
12     , element QuestionAnswer {data($j/ans)}
13     }
14   }
15   </Questionaire>'
16    passing xmltype('<Test>
17   <Questions>
18    <question><type>general</type><asked>Are you ok</asked></question>
19    <question><type>specific</type><asked>Do you know why not working</asked></question>
20   </Questions>
21 </Test>') as "qst"
22 , xmltype('<Results>
23   <question><nbr>1</nbr><ans>Yes</ans></question>
24   <question><nbr>2</nbr><ans>No</ans></question>
25 </Results>') as "res"
26 columns qt xmltype path '.'
27 );
QT
<Questionaire>
<Questions>
    <QuestionNumber>1</QuestionNumber>
    <QuestionType>general</QuestionType>
    <QuestionAsked>Are you ok</QuestionAsked>
    <QuestionAnswer>Yes</QuestionAnswer>
</Questions>
<Questions>
    <QuestionNumber>2</QuestionNumber>
    <QuestionType>specific</QuestionType>
    <QuestionAsked>Do you know why not working</QuestionAsked>
    <QuestionAnswer>No</QuestionAnswer>
</Questions>
</Questionaire>

Removing repeat value in smartforms different window

Similar Messages

Maybe you are looking for