Windows 10 Driver for DV7-1275DX

I'm trying to upgrade from Windows 7 Pro 64 to Windows 10. The only problem is that HP's Windows 7 video driver is not compatible with Windows 10 so I'm stuck with the default Microsoft Lo-Res video driver. My laptop has the NVIDIA GEForce 9600M GT graphics processor so I tried to find a driver on NVIDIA's website. They only have a driver for the GEForce 9600 GT, not the 'M' version for laptops. I tried it anyway (version 341.74) but it's unstable and my laptop locks up after a few minutes. I checked out the NVIDIA forums and apparently NVIDIA does not write the drivers for their mobile graphics processors with a few exceptions that did not include HP. So, I guess it's up to HP to come up with a Windows 10 driver, which they have not as yet. It looks like I'm going back to Windows 7 unless someone out there has a solution.         

Hi: Did you get an error when you tried the HP W7 graphics driver? Did you try manually installing it?  Sometimes that works.

Similar Messages

  • Windows 7 driver for 3500 color printer

    I need a windows 7 driver for my 3500 color laserjet printer.  Windows XP is the latest driver listed on the website.

    The latest Vista drivers for this printer on THIS page shows one of the enhancements as supporting Windows 7. So it should install fine. Do notice that this is the v.13 software.
    EDIT: Just downloaded the version 13 software, and tried installing it. It seemed to go through fine, though I don't have the printer physically here. Check the screenshot. 
    Message Edited by DexterM on 07/10/2009 10:57 AM
    Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"
    I am an ex-HP Employee.
    Attachments:
    Capture.JPG ‏57 KB

  • Windows 7 driver for hp laserjet 1100

    windows 7 driver for hp laserjet 1100

    Hello Stoiko,
    Thanks for the post.  Depending on which model of HP LJ 1100 that you have, the drivers for Win7/64 can be located here:                                                                                                                                                                                             Good Luck!
    HP LJ 1100
    http://h20566.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?lang=en&cc=us&sp4ts.oid=14925
    HP LJ 1100 All-in-One
    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=12006&spf_p.t...
    I worked for HP but my posts and replies are my own....Thank you!
    *Say thanks by clicking the *Kudos!* which is on the left*
    *Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

  • How to develop 64-bit Windows device driver for NI-6602?

    Due to the fact that NI-VISA doesn’t support 64 bit Windows, how can I do to develop a 64 bit Windows device driver for NI 6602 (Counter/timer) PCI card. The possible jobs include:
    Develop a Windows Kernel Mode Driver (“Device Driver”);
    Make it to comply with VISA in order to utilize “osiBus Generic IO Interface” and MH DDK.
    Could anyone please give me some advices as soon as possible?
    William Liao
    Message Edited by Wiliao on 07-22-2005 04:12 PM

    Hi All,
    I am currently working on getting the health parameters
    from the motherboard like voltage fan and temperature. I have already
    already done this using 32 bit winio driver but i am not able to work
    on 64 bit version. is there any driver availbale in 64 bit for
    obtaining this parametes or some one help me to get a 64 bit winio
    driver.
    Regards,
    Senthil prabu R

  • How to get the Windows Vista Driver for ATI Radeon 7500 card?

    How to get the Windows Vista Driver for ATI Radeon 7500 card?
    I am using a IBM Thinkpad T42 with a 32Mb ATI Radeon 7500 graphic card AGP.
    Is there any Vista 32-bit driver to update my card so that this system support Aero effect?
    Thank you.
    regards,
    W. Thong

    wthong wrote:
    How to get the Windows Vista Driver for ATI Radeon 7500 card?
    The Radeon 9000 driver works for the Radeon 7500 card.  I have successfully used it on a T43 with Vista Ultimate x86
    wthong wrote:
    Is there any Vista 32-bit driver to update my card so that this system support Aero effect?
    Unfortunately no.  The Radeon 9000 driver should bring your graphics score up to close to 2, but it will not get it high enough to enable Aero support.
    Cheers,
    Bill
    I don't work for Lenovo

  • Windows 7 driver for CanoScan LiDE 80?

    Since upgrading to Windows 7, 64 bit, I have searched for a driver for my Canoscan Lide 80. Trying various suggestions to use other drivers like XP, Windows 7 32 bit have all failed. Is there a solution to this problem? Thanks.

    Hello owg1!
    Canon USA does not have a 64bit WIndows 7 driver for the CanoScan LiDE 80 scanner.  We're so sorry for any inconvenience this may cause!  We don't recommend installing other driver versions onto your 64bit Windows 7, but feel free to Contact Us for possible upgrade options available.
    We hope this information helps!

  • Windows 7 Driver for Apple Imagewriter Select 360 Printer

    Does anyone know where I can get a Windows 7 driver for my Apple Imagewriter Select 360 Printer?
    Thank you.

    Dear Carol,
    You may try this to install the Apple Imagewriter printer driver with the Windows XP CD:
    http://social.answers.microsoft.com/Forums/en-US/w7hardware/thread/883d00df-bdf3 -4dec-b91f-524963ec81a7
    Regards,
    Novia
    Message was edited by: Novia

  • Windows 7 driver for my original memory stick voice recorder ICD-MS1

    When will Sony offer a Windows 7 driver for my original memory stick voice recorder ICD-MS1?
    Cannot upgrade this great system on the new W7 OS on my laptop.
    KJ

    Hi jonsey60! Unfortunately we don't have any information if there will be any Windows 7 driver that will become available soon for this recorder.  You may just bookmark this link for future reference. 

  • Windows 7 driver for Scanjet 4370

    Will there be a Windows 7 driver for the HP Scanjet 4370?
    It seems that everytime that I upgrade my operating system I loose an HP scanner.

    Digitizer wrote:
    Will there be a Windows 7 driver for the HP Scanjet 4370?
    This page indicates the driver is available from Windows Update and there will not be drivers from HP beyond that.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Windows 7 Driver for VFO230

    Windows 7 driver for Creative Live! IM Pro model # VFO230 is needed. I can only find Windows Vista driver online at this time. I used this camera on windows vista service pack 2 but today got a newer computer with windows 7 operating system and would still like to use this camera. I could not locate a beta windows 7 driver for the VFO230 model either. If there is a compatible driver for Windows 7 that will work with camera model # VFO230 please let me know which one it is and where I can obtain it.
    Please and thank you.

    Hello Stoiko,
    Thanks for the post.  Depending on which model of HP LJ 1100 that you have, the drivers for Win7/64 can be located here:                                                                                                                                                                                             Good Luck!
    HP LJ 1100
    http://h20566.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?lang=en&cc=us&sp4ts.oid=14925
    HP LJ 1100 All-in-One
    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=12006&spf_p.t...
    I worked for HP but my posts and replies are my own....Thank you!
    *Say thanks by clicking the *Kudos!* which is on the left*
    *Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

  • NEED windows 8 driver for MSI fx400 plisss

    I need windows 8 driver for msi fx-400 because MSI TDE technology, MSI GPU Boost technology, my power up, camera, and bluetooth not work, plisss i need it thanks

     
    Quote from: flobelix on 17-January-13, 02:40:21
    FX400 is not among the notebooks verified to work with Win8 (http://event.msi.com/2012/windows8/index.html). Therefor MSI won't provide any drivers or support for using Win 8 on this computer.

  • Windows 10 Driver for SoundBlaster XFi Elite Pro?

    Hi everyone. I'm new to this forum and glade to join it.
    My reason to join is I'm asking if there will be a Windows 10 driver for the card Soundblaster XFi Elite Pro?
    Thank you for any information.

    http://forums.creative.com/showthread.php?t=714135

  • Windows XP driver for HL-DT-ST DVDRW GSA-S10N

    Does anyone know where I can find a Windows XP driver for my pc's HL-DT-ST DVDRW GSA-S10N? Tried to find on the net and Apple site but no joy.
    Drive works fine in Snow Leopard partition, but for what ever reason Windows has "lost" the driver and as such does not "see" the device.

    typically I used the the disk to run bootcamp utility on disk driectly from windows and this would update drivers. can't do that now because device not working. tried copying bootcamp to usb device but no joy, bootcamp comes up with an error when run that way. not sure if it is a pc error or the way bootcamp is designed i.e. can only run from CD.
    if somebody can tell me the driver file name in bootcamp folder I can try and run that individually.

  • Any hope for a Windows 7 or Windows 8 driver for the Conexant 23880

    I have a HP m1050y desktop and am looking to get a driver for the Conexant 23880 video capture (Blackbird NTSC Dual-input) I have not had any success in getting any sound from it. Currently running Windows 8 developer preview, or can you suggest a replacement card that will work with this setup.
    GaryCN

    fellow victim here! There should be a CLASS ACTION LAWSUIT !!!!

  • Windows 7 driver for PCI Simple Controller

    I installed the Lenovo Windows 7 Professional upgrade on my R400 (7443-CTO) from Windows XP Professional.  The ThinkVantage tools repeatedly shows I need a driver for the "PCI Simple Controller".  I have been unable to find that driver on the Lenovo support site.  Any assistance to help resolve this issue would be appreciated.
    Solved!
    Go to Solution.

    To create shortcuts or folders under the startmenu in Win7 you can rightclick "All Programs" under the startmenu. Then you can choose "Open" or "Open all users". If you choose "Open" you will be able to change the startmenu for the current user account only and when you select "Open all users" you can change the startmenu for all user accounts on the computer. The startmenu in Windows is basically just folders and shortcuts stored in a folder on your computer. The startmenu for all users are stored under "C:\ProgramData\Microsoft\Windows\Start Menu" and for the current user under "C:\Users\<useraccount>\AppData\Roaming\Microsoft\Windows\Start Menu"
    So let's say you want the "Thinkvantage" folder under the Windows startmenu where it should normally be after installing Lenovo toolbox and then the shortcut for Lenovo Toolbox under that folder. Then you can rightclick "All Programs" under the startmenu and select "Open all users" from the context menu. You should then see a explorer windows with the folder "Programs". If you open the "Programs" folder you will see the same contents as you see under the "startmenu -> All Programs". Since this is the area for the common startmenu for all user accounts there might be some more entries under the startmenu compared to what you see in this windows. By selecting "Open" instead of "Open all users" as explained above you should find the rest. So when you rightclicked, selected "open all users" and then doublecliked on "Programs" then you can rightclick somewhere in that window and choose "New -> Folder" from the context menu. Then you can give the folder the name "Thinkvantage". Then open the "Thinkvantage" folder and create a shortcut for Lenovo Toolbox. After you have done these steps you should find the Thinkvantage folder under "All Programs" and then the shortcut for Lenovo Toolbox under the Thinkvantage folder. This is how you can easily change the startmenu in Windows to add, remove or change entries under "All Programs".
    Normally after installing Lenovo Toolbox it should be under "All Programs -> Thinkvantage" and not sure why that is not the case for you, but then you can add it manually like explained above. When i installed Lenovo Toolbox a shortcut and the Thinkvatage folder was created under "All Programs" during the installation. Also if you install the "System interface driver" and "Hotkey feature set" you can start Lenovo Toolbox by pressing the blue thinkvantage button on your computer. Unless you already installed "System Update 4.0" i would recommend to do so. System Update will find the drivers and software from Lenovo for your computer and give you a list where you can select those you want to download and install. System update will then download and install the drivers and software you selected and you don't have to download and install each one of them manually one by one. It will save you a lot of time. You can find system update for Windows 7 using the link below.
    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-73695
    User Access Control is a new feature of Windows that started with Windows Vista so therefore you won't find it in XP. Only Vista and Windows 7 got UAC.
    Yes it's a bit late over here I'm sure i will enjoy the weekend and hope you will do the same.

Maybe you are looking for

  • How to Fetch MAC-Adresses across Subnets

    Hi All, for some reason we have a number of Machines out there where we would like to install a Package via ARD instead of Casper. We have a list of Hostnames from this Machines. Now, the first idea was to ping them and to get the MAC-Adress out of t

  • Purchase Order date vs Invoice date

    Hi to all. In our system we run t-code me21n to create purchase order and later on we run t-code MIRO, MIR7 etc. to post incoming invoice. My question is how do I prevent system from letting end users enter invoice date that has earlier date than pur

  • Combining .fla files with multiple scenes

    I understand how to combine a simple flash file into another, but my problem is the files I am trying to combine have multiple scenes. How would I do this?

  • How to expert in function modules

    Hello, Can anybody tell me how to start working on functional modules...pls provide me a simple documentation. Thnx in advance. sreenivas.

  • When to use abstract classes instead of interfaces with extension methods in C#?

    "Abstract class" and "interface" are similar concepts, with interface being the more abstract of the two. One differentiating factor is that abstract classes provide method implementations for derived classes when needed. In C#, however, this differe