Windows 2008 R2 Folder assign permission "Read and Write" problem with *.doc file

Hello All,
I am a new one here,
I am sorry for any mistakes and also my english is so poor.
M Brother company runing Windows 2008 R2 as Active Directory...
We have folder Name: Admin
and in this folder, there are alot documents files as : *.doc, *.dwg, *.txt etc.....
All user accesing to these files and they can open to edit and save...
One day my brother want me to set Admin folder for all users just"Read and Write.." mean they still can open files to edit and save... but can't delete..
I did success with this..
But only one thing happen.. when they open *.doc file to edit and attempting to save, the message alert" access denide " and they can only "SAVE AS"...We don't want "Save as"
Could you show me how can we fix error with *.doc file while they trying to save? because it allow only save as.. but other files as *.text file or *.dwg they can save without problem..
Could expert here ever face this issues and fix by yourself, please share me with this..
Please help me..
Best regards,

Hi,
Office programs are specific. They will create a temp file when edit, then the temp file will be deleted when close. So Delete permission is needed for users to saving Office files like Excel/Word.
For more detaile information, please refer to the thread below:
Special Permissions - User cannot save files
http://social.technet.microsoft.com/Forums/windowsserver/en-US/721fb2f1-205b-46e5-a3dc-3029e5df9b5b/special-permissions-user-cannot-save-files
Best Regards,
Mandy 
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

  • In iCal and Notifications on a notebook, is it possible to expand the notes window to make it easier to read and write notes?

    In iCal and Notifications on a notebook, is it possible to expand the notes window to make it easier to read and write notes? In the past, I have used Outlook calendar and tasks and I was able to expand the windows which allowed me to put a great amount of details into either the notes section in events and tasks. It would be great to be able to do this in iCal and Notifications as well. I am using a Macbook Pro with OS X 10.8. Thank you very much for assistance with this.

    HI,
    Try Spaces for a virtual desktop.
    http://www.ehow.com/how2189851use-spaces-mac-os-x.html
    Carolyn

  • How to read and write data from json file from windows phone7 app

    Hi
    I am developing wp7 app for the use of students my questions are
    How can i write a code to read and write the json/text file for the wp7.
    I am using windows 7 OS, VS 2010 Edition.
    This is my code below:
    xaml:
    <Grid>
                        <TextBlock Height="45" HorizontalAlignment="Left" Margin="7,18,0,550" Name="textBlock1" Text="Full
    Name: " />
                        <TextBox Width="350" Height="70" HorizontalAlignment="Left" Margin="108,1,0,0" Name="txtName"
    Text="Enter your full name" VerticalAlignment="Top" />
                        <TextBlock Height="45" HorizontalAlignment="Left" Margin="6,75,0,0" Name="textBlock2" Text="Contact
    No: " VerticalAlignment="Top" />
                        <TextBox Width="350" Height="70" HorizontalAlignment="Left" Margin="108,61,0,480" Name="txtContact"
    Text="Enter your contact number" MaxLength="10" />
                        <Button Content="Register" Height="72" HorizontalAlignment="Left" Margin="10,330,0,0" Name="btnRegister"
    VerticalAlignment="Top" Width="190" Click="btnRegister_Click" />
                    </Grid>
    xaml.cs:
    private void btnRegister_Click(object sender, RoutedEventArgs e)
                string name, contact;
                name = txtName.Text;
                contact = txtContact.Text;
                try
                    if (name != "" && contact != "")
                        string msg = name + " " + contact;
                        MessageBox.Show(msg);
                        Student stud = new Student
                            Name= name,
                            Contact = contact,
                        string jsonString = JsonConvert.SerializeObject(stud);
                        MessageBox.Show(jsonString);
                    else
                        MessageBox.Show("Input Proper Information", MessageBoxButton.OK);
                catch (Exception ex)
                    MessageBox.Show(ex.Message);
    I have download NewtonSoft.json version 5.0.8.
    So, I am able to convert input data into json format, but how can I able to write and read this data from a json/text file.
    How can I do?
    Thank you in adv and please, reply soon.

    We don't have many samples left for Windows Phone 7 + Azure, the closest one to what you want to do is probably:
    Using Local Storage with OData on Windows Phone To Reduce Network Bandwidth
    this sample uses the local database feature: 'LINQ to SQL', available to Windows Phone 7.1 and 8.0 Silverlight applications, instead of simple file storage but even if you choose to stick with simple file storage I believe you should be able to adapt the
    networking related portions of the sample to your particular application.
    Eric Fleck, Windows Store and Windows Phone Developer Support. If you would like to provide feedback or suggestions for future improvements to the Windows Phone SDK please go to http://wpdev.uservoice.com/ where you can post your suggestions and/or cast
    your votes for existing suggestions.

  • Read and write info from/to file available at client side.

    Hi,
    I have some table name in one CSV file at client side.
    once you get list of tables name from input CSV file at client side.
    Need to run one query to know total rows and size of table in MB , this i need to repeat for all tables which i got from input file.
    finally write 'table name | total rows | size of table in MB' whole info in another CSV file at client side. this output CSV file name will contain timestamp.
    Please guide me in detail how to read and write file avail at client side.
    I am using sql developer at client side.
    version : oracle11g
    Thanks in advance.

    This is a simple SQL question and this forum is for SQLDEveloper, however, this is a question for our SQL*Plus support which can help with this.
    clear SCREEN
    set FEEDBACK off
    set head off
    --Gather stats to populate rownums and avg length of rows.
    --These are not exact sizes (obviously) but you get the idea.
    begin
    dbms_stats.gather_schema_stats ('<YOUR_SCHEMA');
    end;
    select TABLE_NAME||','||NUM_ROWS||','||ROUND((NUM_ROWS*AVG_ROW_LEN)/(1024*1024)) CSV
    from USER_TABLES
    where num_rows is not null order by num_rows desc;

  • What is the best combination of read and write objects to binary files ...

    Hi everyone,
    what are the best combination of read and write objects to read/write a record of customers from a binary file. I should be able to use StringTokenizer. I am bit confused with all these Stream reader and writers.
    abdul

    You are, indeed, confused:
    o StreamTokenizer works on character input, not binary input.
    o Readers and Writers in general work on character streams, not binary.
    That leaves you various input streams and output streams for reading binary data.

  • HOW DO YOU MAKE A 2.5' USB PORTABLE HDD ACCESSIBLE TO A MAC BOOK AND A WINDOWS BASED LAPTOP SO ABLE TO READ AND WRITE TO BOTH.

    HO

    The biggest diference is exFAT can handle files larger then 4GB in size.
    FAT (as it is called on OS X but really FAT32) can only save files smaller then that 4GBs.
    So if you don't need to save files bigger then 4GBs then you may want to use FAT32.
    But if you do have files (Not folders, just files) bigger then 4GBs then you will need to use exFAT. But there is a caveat to using exFAT. Do Not use Mac OS X to format a drive exFAT, even though it is an option in Disk Utility. OS X screws up the exFAT format to the point No Windows PC will be able to read the drive. In fact when connecting a OS X formatted exFAT drive to a Win PC the Win PC will state the drive needs to initialized.
    So always use a Win PC to format the drive to exFAT. It will then be seen by both Windows and Mac OS X.
    There is another option and that is to use a program that can make either Windows or OS X read the others native format. But I do not suggest that as those program can, and do, screw up which could make the drive inaccessible to either system. Which would mean you would lose all the data on that drive.
    fat-tomo wrote:
    Thanks for your swift reply, what's the difference between the two and which is better.

  • Read and Write Problem

    Hello!
    I have a problem with the Data I/O in my program. The button "Animation" generates random numbers and saves them into a file. With the Button "Vergleich" i want to load the data and reproduce the data in the graph.
    When i push the button "Vergleich" i can choose the data, but the program don*t reproduces it!
    Coult anybody help me??
    TNKS
    Best regards,
    Peter
    Labview 7.1 on Windows 2000
    Attachments:
    program.vi ‏68 KB

    Here are two changes, one uses the write to spreadsheet and read from spreadsheet file functions, the other changes your "read file" to "read text file"
    P.M.
    Putnam
    Certified LabVIEW Developer
    Senior Test Engineer
    Currently using LV 6.1-LabVIEW 2012, RT8.5
    LabVIEW Champion
    Attachments:
    program[1.x].zip ‏41 KB

  • PXI-6508 Read and Write Problem

    Hi,
    I have two PXI-6508 DAQ cards. I am using one for inputs and one for outputs. Using read data socket vi I am able to read from the input card, and using write data socket I am able to write to the output card. I am configuring one card to read and one to write, both work seperatly but when I put both vi into my application it crashes and refuses to work. I then need to reboot my PC to then start again. What am I doing wrong?

    Hi gedsy
    I guess you are using some ressources at the same time. The ressource can be a VI or a refnum or any other thing of this kind.
    You should check you are not using the same vis and expect different dataspaces. If you want to use different data spaces with same VIs, you must set them as re-entrant.
    Doc-Doc
    Doc-Doc
    http://www.machinevision.ch
    http://visionindustrielle.ch
    Please take time to rate this answer

  • Printing and Sizing Problems with PDF Files

    I have grading keys saved as PDF files.  When I open them in the Adobe Reader X, some come up looking fine, fitting nicely on an 8.5" x 11" page and ready for print.  Others come up looking shrunken and in the middle of the page.  When I try to resize and print these, I get all kinds of funky results.
    What I want to do is process all the PDF files (grading keys) so that they will fit nicely on the 8.5x11, without the user having to do a bunch a stuff resizing, etc.
    I have included links to two PDF files below.  The first comes up fine in the Adobe Reader and the sond does not.  Can anyone help me with this perplexing issue?  Thanks.
    www.goodnewsjail.org/good.pdf  (Formatted correctly)
    www.goodnewsjail.org/toosmall.pdf (Comes up looking scrunched on the page)
    Note:  I might add that when I open these files in Adobe Photoshop CS, the one above that looks good comes up with dimensions 23.687"x17.745", while the one that comes up looking funky has dimensions 10.24"x7.85".  I am as confused as a termite in a yo-yo.

    Both of your documents have the same size: 279.4mm x 215.9mm.  The difference is that the 'good.pdf' has its content evenly distributed over the available size, the other one has its content minimized in the center, with a large white space around it (in Adobe Acrobat).
    As for why it shows a different size in Photoshop, I have no idea.
    There is not much you can do about it with Adobe Reader, but you can change the size using Photoshop or Illustrator.  See attachment to this post.

  • Read and write binary from txt file

    Well
    i need to know how to convert strings to binary data
    ("Chapter One"--->100111000011) to compress them using Lempel Ziv compression algorithm, and print a new file with binary codes.
    I know that i have to use OutputStream and ImputStream classes, but i don know how it works...
    Please help me with this problem...

    String.getBytes(String charsetName)

  • Read and write Values from Configuration File in BizTalk

    There is a requirement where Biz talk orchestration read the value dynamically from Config Store.After some process updating the value in config store.
    I though to use SQL Server and create one table with single column.Biztalk will call the Storeproc to get the value and similary for update system will call another SP.
    Instead of using SQL Server DB is there option to implement this requirement like app.config,BTSsvcxxexe.config ,SSO Config store etc.
    If multi-users access the value from Config store and try to update ,how to handle lock mechanism.

    Hi BizQ,
    Refrain from using BTSConfig file or any custom config file if you have a requirement to update the data. Modifying a
    configuration file at runtime can cause some nasty, unexpected behavior inside your application if it's not managed properly.
    I would suggest you to use Custom DB or SSO Database in this case.
    Both have their Pros and Cons.
    SSO Database:
    You get out of the box encryption
    It is a central store which will service all BizTalk servers within your group
     SSO implements a caching mechanism internally for the data
    Custom DB:
    By storing the configuration in the database you don’t have to worry about consistency of data across servers like you would with a config file.
    Cache needs to be implemented by program to avoid delays in reading from physical file.
    In your case I recommend to go with SSO DB as in terms of storing custom configuration data in SSO for End Point/Application
    specific information and credentials and potentially configuration information which you also need to write and update at runtime from your code or via an administrator.
    You can use Richard Seroter's tool to store values as "Config Store" in SSO database and then write a .net helper
    utility to retrieve it using SSOConfigStore class. It has method GetConfigInfo and you need to pass application name with other parameters. It returns ConfigurationPropertyBag from where you can read property name and values.
    http://seroter.wordpress.com/2007/09/21/biztalk-sso-configuration-data-storage-tool/ 
     http://blogs.msdn.com/b/teekamg/archive/2009/08/19/sso-configuration-application-mmc-snap-in.aspx.
    Rachit
    Please mark as answer or vote as helpful if my reply does

  • How to read and write in a binary file?

    Hi all,
    how can i search in a binary file for string and replace this string with another
    bin file ...test.bin
    search String "DE AD FA 01"
    regards
    gebi

    You need to install Google on your computer. That way, you can search for all the information on that algorithm available on the Internet.

  • Anyone have example to read and write XML to/from file

    I am writing a swing utility and need to save and read data in XML. I have looked around google, but the examples are just confusing me.
    Jonathan

    Do these xml docs have dtd's? And specific DOM implementation needs or just a custom xml?
    I have some examples in http://cvs.sourceforge.net/viewcvs.py/mathml-x/mathml-x/src/com/neuralworks/physics/Academy.java?view=markup
    follow openMenuItemActionPerformed and openFEMMLDocument(String filePath). Look for DocumentBuilder
                DocumentBuilderFactory factory =
                DocumentBuilderFactory.newInstance();
    /*            factory.setAttribute("element.factory",
                                     ELEMENT_FACTORY);
                factory.setAttribute("attribute.factory",
                                     ATTR_FACTORY);
                DocumentBuilder builder = factory.newDocumentBuilder();
                //builder.setEntityResolver(new X3DEntityResolver());
                //builder.setErrorHandler(new X3DErrorHandler());
                femDoc = findXMLFile(builder, filePath);
                org.w3c.dom.Element docElement=femDoc.getDocumentElement();
                javax.swing.tree.DefaultMutableTreeNode dmtn=new javax.swing.tree.DefaultMutableTreeNode("FEMML");
                javax.swing.tree.DefaultMutableTreeNode svgChild=new javax.swing.tree.DefaultMutableTreeNode(docElement.getNodeName());
                //System.out.println(svgDocument.getTitle()+" nv "+svgSVGElement.getNodeValue());
                //recurseDOM2TreeNodes(svgChild, docElement.getChildNodes());
                dmtn.add(svgChild);
                JTree tree=new JTree(new javax.swing.tree.DefaultTreeModel(dmtn));
                tree.setRootVisible(true);
                tree.setShowsRootHandles(true);
                tree.setEditable(true);
                //try
                    //X3DTreeAdapter x3dTreeAdapter=new X3DTreeAdapter(x3dDTDParser.parse());
                    //org.web3d.x3d.dom.swing.DOMTreeCellEditor domTreeCellEditor=new org.web3d.x3d.dom.swing.DOMTreeCellEditor();
                    //tree.setCellEditor(domTreeCellEditor);
                    //org.web3d.x3d.dom.swing.DOMTreeCellRenderer domTreeCellRenderer=new org.web3d.x3d.dom.swing.DOMTreeCellRenderer();
                    //domTreeCellRenderer.addMouseListener(x3dTreeAdapter);
                    //domTreeCellRenderer.addMouseMotionListener(x3dTreeAdapter);
                    //tree.setCellRenderer(domTreeCellRenderer);
                    //tree.addMouseListener(x3dTreeAdapter);
                    //tree.addMouseMotionListener(x3dTreeAdapter);
                    academicSplitPane.setLeftComponent(new JScrollPane(tree));Lot of commented out stuff I need to clean up. There are other examples of opening specific xml docs that have special DOM implementations; svg and mathml for example.
    For saving I use xslt with an identity transform to go from an in memory DOM source to an xml document on disk.
    Follow the saveAs(String filePath) method and the identity.xsl is http://cvs.sourceforge.net/viewcvs.py/mathml-x/mathml-x/stylesheets/identity.xsl?rev=1.2&view=markup

  • Open Excel read and write problem

    I am trying to deterimine what is causing excel files to open up as "Read Only" using Labview, when I excplicitly state to open as "ReadWrite"
    It seems to work well in the development environment, but not so well on some PCs in the application environment. 
    Attachments:
    lv_excel.jpg ‏122 KB

    Are you using a template file? Is the file marked as "read only"?
    Do you or the application has proper admin rights in the PC where it used?
    Guru
    Regards
    Guru (CLA)

  • Log and Transfer problem with MXF files

    Hi, folks.  I've spent an hour searching the threads, but I haven't found an answer to my problem (or anyone who's had the same problem).  Please help if you can!
    We're using the Canon XF300 and we tested some footage a couple weeks ago.  We ingested it into Final Cut Pro (7.0.3) using Log and Transfer (after installing the Canon plugin) and it all came through perfectly.  Worked without a problem.
    Now, we have a week's worth of field footage, captured exactly the same way, transferred to the same hard drive, exactly the same as the test footage...
    See what I'm getting at?  EVERYTHING has been done the same.  Identical.
    And yet the new footage is not being recognized in the Log and Transfer window.
    Instead, this is what's happening:
    What gives?  Everything we're doing is identical to the testing we did a couple weeks ago.  Like I said, I've searched the forums, read a couple dozen threads, followed the Creative Cow link mentioned in several of them.  I must be missing something.  Please fill in the gap for me.  Thank you!
    Like I said before, we've downloaded the Canon plugin, imported test footage at ProRes 422, watched it, edited it, enjoyed it.  But now our new footage is unrecognizable by FCP.  And the directory structure is identical to that of the test footage.
    Sigh...

    UPDATE --
    The field producers transferred the footage incorrectly.  They left off the master directory and went in 1 directory too far.
    Yes, David, the frame rate was all the same (30p).
    Russ... I imagine you were going to say something along the lines of "MAKE SURE YOU INCLUDE THE ENTIRE DIRECTORY."  Leave nothing behind.
    Now... the question is... can I create a new CONTENTS folder and simply drag the CLIPS folder into it?

Maybe you are looking for