Windows 2008 R2 RPC errors
We have 2 Windows 2008 R2 servers, with all current windows updates applied. However, it seems that sometimes the AD replication just stops working . When you try to replicate manually you get told the RPC server is unavailable.
I have tried running dcdiag on both machines and each says that it is ok and the other is not available. Event viewer says there is an error 1308.
If I reboot my DC2 then the replication starts working again.
Any idea's? Or would you need the reports from those Dcdiag or some other log I can generate?
Hi,
Are there multiple sites in the domain? Here is an article about Event 1308.
Event 1308 KCC_REPLICA_LINK_DOWN
http://www.microsoft.com/technet/support/ee/transform.aspx?ProdName=Windows+Operating+System&ProdVer=5.2&EvtID=1308&EvtSrc=NTDS+KCC
In addition, here are some troubleshooting links for RPC Server Unavailable message:
Windows Server Troubleshooting: "The RPC server is unavailable"
http://social.technet.microsoft.com/wiki/contents/articles/4494.windows-server-troubleshooting-the-rpc-server-is-unavailable.aspx
Troubleshooting AD Replication error 1722: The RPC server is unavailable
http://support.microsoft.com/kb/2102154/en-us
Best Regards,
Amy
Similar Messages
-
Starting EPMA in a Windows 2008 Virtual Environment - Error Encountered
We have installed EPMA 11.1.2.1 in a Dev environment (VM) running Windows 2008 Server. We have successfully started all services manually, with the exception of EPMA Server. When we attempt to start the EPMA Server, we encounter an error message, "The Hyperion EPMA Server located on Local Computer started and then stopped. Some services stop automatically if they are not in use by other programs or services." We are starting the services in an order recommended by Oracle, but it seems one service either needs to be started ahead of EPMA Server or another service is not fully starting in time.
Thoughts and suggestions welcome.What backend are you using? if MS-SQL it is most likely because you need to set READ_COMMITTED_SNAPSHOT and ALLOW_SNAPSHOT_ISOLATION to ON.
Pablo -
HP DL380 G5 Windows 2008 R2 VM error
I am loading windows server 2008 R2 and run one VM in Server manaer, and when i click vm and choose installed, the problem said" Hypervisor" not enable.. atually I already enable it in BIOS and when i nstalled windows 2012 server on that machine, the VM working great without problem..
so i cambe to load windows server 2008 r2 and i follow someon instruction as below:
Reboot server and go into the BIOS by pressing F9. Go to "Advanced options > Processor Options" and enable these two sub-options:
"No-Excecute Memory Protection" and
"Intel(R) Virtualization Technology"
Save with F10.
After the windows start , the blue screen appea and i went to disable "No-Excecute Memory Protection" in bios, the bluescreen gone, but when i run VM, the problem relate "Hypervisor" error again..
What can i do?Hi:
You may also want to post your question on the HP Business Support Forum -- DL Servers section.
http://h30499.www3.hp.com/t5/ProLiant-Servers-ML-DL-SL/bd-p/itrc-264#.VCCmxjh0zGg -
IDES ECC6.0 SR3 For SQL ON Windows 2008 64bit Install Error
Hi, All:
When I'm installing sap ECC6.0 ides iam getting the following error
INFO 2008-12-11 15:13:19.069
Creating file C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\x.
INFO 2008-12-11 15:13:19.069
Removing file C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\x.
INFO 2008-12-11 15:13:22.281
Creating directory C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\log_11_Dec_2008_15_13_22.
INFO 2008-12-11 15:13:22.361
Copied file 'E:/IDES ECC6.0 SR3/D51034992_IDES_Install_Master/IM_WINDOWS_X86_64/NW04S/WEBAS/IND/control.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS'.
INFO 2008-12-11 15:13:22.364
Copied file 'E:/IDES ECC6.0 SR3/D51034992_IDES_Install_Master/IM_WINDOWS_X86_64/NW04S/WEBAS/IND/dialog.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS'.
INFO 2008-12-11 15:13:22.367
Copied file 'E:/IDES ECC6.0 SR3/D51034992_IDES_Install_Master/IM_WINDOWS_X86_64/NW04S/WEBAS/IND/keydb.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS'.
INFO 2008-12-11 15:13:22.369
Copied file 'E:/IDES ECC6.0 SR3/D51034992_IDES_Install_Master/IM_WINDOWS_X86_64/NW04S/WEBAS/IND/messages.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS'.
INFO 2008-12-11 15:13:22.371
Copied file 'E:/IDES ECC6.0 SR3/D51034992_IDES_Install_Master/IM_WINDOWS_X86_64/NW04S/WEBAS/IND/toplevel.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS'.
INFO 2008-12-11 15:13:22.376
Copied file 'E:/IDES ECC6.0 SR3/D51034992_IDES_Install_Master/IM_WINDOWS_X86_64/NW04S/WEBAS/IND/control.dtd' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS'.
INFO 2008-12-11 15:13:22.378
Copied file 'E:/IDES ECC6.0 SR3/D51034992_IDES_Install_Master/IM_WINDOWS_X86_64/NW04S/WEBAS/IND/doc.dtd' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS'.
INFO 2008-12-11 15:13:22.380
Copied file 'E:/IDES ECC6.0 SR3/D51034992_IDES_Install_Master/IM_WINDOWS_X86_64/NW04S/WEBAS/IND/keydb.dtd' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS'.
INFO 2008-12-11 15:13:22.381
Copied file 'E:/IDES ECC6.0 SR3/D51034992_IDES_Install_Master/IM_WINDOWS_X86_64/NW04S/WEBAS/IND/messages.dtd' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS'.
INFO 2008-12-11 15:13:22.383
Copied file 'E:/IDES ECC6.0 SR3/D51034992_IDES_Install_Master/IM_WINDOWS_X86_64/NW04S/WEBAS/IND/packages.dtd' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS'.
INFO 2008-12-11 15:13:22.385
Copied file 'E:/IDES ECC6.0 SR3/D51034992_IDES_Install_Master/IM_WINDOWS_X86_64/NW04S/WEBAS/IND/resources.dtd' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS'.
INFO 2008-12-11 15:13:22.387
Copied file 'E:/IDES ECC6.0 SR3/D51034992_IDES_Install_Master/IM_WINDOWS_X86_64/NW04S/WEBAS/IND/sapinstgui.dtd' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS'.
INFO 2008-12-11 15:13:22.393
Copied file 'E:/IDES ECC6.0 SR3/D51034992_IDES_Install_Master/IM_WINDOWS_X86_64/ERP05/WEBAS/MSS/PD/exportcds.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS'.
INFO 2008-12-11 15:13:22.395
Copied file 'E:/IDES ECC6.0 SR3/D51034992_IDES_Install_Master/IM_WINDOWS_X86_64/ERP05/WEBAS/MSS/PD/jexclude.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS'.
INFO 2008-12-11 15:13:22.397
Copied file 'E:/IDES ECC6.0 SR3/D51034992_IDES_Install_Master/IM_WINDOWS_X86_64/ERP05/WEBAS/MSS/PD/packages.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS'.
INFO 2008-12-11 15:13:22.398
Copied file 'E:/IDES ECC6.0 SR3/D51034992_IDES_Install_Master/IM_WINDOWS_X86_64/ERP05/WEBAS/MSS/PD/product.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS'.
INFO 2008-12-11 15:13:22.400
Copied file 'E:/IDES ECC6.0 SR3/D51034992_IDES_Install_Master/IM_WINDOWS_X86_64/ERP05/WEBAS/MSS/PD/usages_data.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS'.
INFO 2008-12-11 15:13:22.402
Copied file 'E:/IDES ECC6.0 SR3/D51034992_IDES_Install_Master/IM_WINDOWS_X86_64/ERP05/WEBAS/MSS/PD/usages_data2.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS'.
INFO 2008-12-11 15:13:22.405
Copied file 'E:/IDES ECC6.0 SR3/D51034992_IDES_Install_Master/IM_WINDOWS_X86_64/catalog.dtd' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS'.
INFO 2008-12-11 15:13:22.411
Copied file 'E:/IDES ECC6.0 SR3/D51034992_IDES_Install_Master/IM_WINDOWS_X86_64/resourcepool.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS'.
INFO 2008-12-11 15:13:22.415
Creating file C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\start_dir.cd.
INFO 2008-12-11 15:13:22.417
Creating file C:\Program Files\sapinst_instdir\x.
INFO 2008-12-11 15:13:22.417
Removing file C:\Program Files\sapinst_instdir\x.
INFO 2008-12-11 15:13:23.349
Creating file C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\statistic.xml.
INFO 2008-12-11 15:13:23.352
Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS/statistic.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS/statistic.1.xml'.
WARNING 2008-12-11 15:13:23.397
Unable to get information about path
LABEL.ASC\ using GetVolumeInformation. Operating system error message: 指定的路径无效。
INFO 2008-12-11 15:13:27.979
Creating directory C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\SUPPORT_CONTAINER.
INFO 2008-12-11 15:13:27.987
Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS/keydb.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS/keydb.1.xml'.
INFO 2008-12-11 15:13:27.993
Creating file C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\inifile.xml.
INFO 2008-12-11 15:13:28.004
Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS/inifile.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS/inifile.1.xml'.
INFO 2008-12-11 15:13:28.084
Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS/statistic.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS/statistic.2.xml'.
INFO 2008-12-11 15:13:28.84
Execute step fillContextProduct of component |NW_Onehost|ind|ind|ind|ind|0|0
INFO 2008-12-11 15:13:41.151
Execute step showLicenseAgreement of component |NW_Onehost|ind|ind|ind|ind|0|0|licenseAgreement|ind|ind|ind|ind|0|0
INFO 2008-12-11 15:13:41.181
Execute step fillContext of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0
INFO 2008-12-11 15:13:41.231
Execute step readProductXML of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|Read_Product_XML|ind|ind|ind|ind|1|0
WARNING 2008-12-11 15:13:41.285
The install parameter INSTPARA_DB is already defined (existing value IND, new value MSS).
WARNING 2008-12-11 15:13:41.286
The install parameter INSTPARA_PRODUCT is already defined (existing value NetWeaver, new value ERP).
WARNING 2008-12-11 15:13:41.286
The install parameter INSTPARA_PRODUCT_VERSION is already defined (existing value 04S, new value 05).
INFO 2008-12-11 15:13:41.288
Execute step checkRuntimeSystem of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|Preinstall|ind|ind|ind|ind|0|0
INFO 2008-12-11 15:13:41.336
Execute step askStandardMode of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|Preinstall|ind|ind|ind|ind|0|0
INFO 2008-12-11 15:13:46.115
Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS/product.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS/product.1.xml'.
INFO 2008-12-11 15:13:46.118
Execute step syncKeydb of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|Preinstall|ind|ind|ind|ind|0|0
INFO 2008-12-11 15:13:46.180
Execute step changeUserInstall of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|Preinstall|ind|ind|ind|ind|0|0
INFO 2008-12-11 15:13:46.218
Creating file C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\change.log.
INFO 2008-12-11 15:13:46.220
Output of change user /install is written to the logfile change.log.
ERROR 2008-12-11 15:13:46.226
FSL-04000 An internal error occurred: basic_pipebuf::getChar: codecvt facette::in could not convert character..
ERROR 2008-12-11 15:13:46.226
FSL-04000 An internal error occurred: basic_pipebuf::getChar: codecvt facette::in could not convert character..
ERROR 2008-12-11 15:13:46.227
MUT-03025 Caught ESyException in Modulecall: basic_pipebuf::getChar: codecvt facette::in could not convert character..
ERROR 2008-12-11 15:13:46.229
FCO-00011 The step changeUserInstall with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|Preinstall|ind|ind|ind|ind|0|0|changeUserInstall was executed with status ERROR ( Last error reported by the step :Caught ESyException in Modulecall: basic_pipebuf::getChar: codecvt facette::in could not convert character..).
Can anyone let me known where I went wrong.
thanks.
Anhwei ChanOnly English versions are supported.
You can install, however, the chinese language pack on top - but the base system must be English.
No non-chinese speaking person will be able to help you with your problem since the error message is in Chinese.
Markus -
[windows 2008 R2 SP1] RPC Error 1726 (RPC_S_CALL_FAILED)
Hi All
Please do me a favor, thanks.
Our program is facing RPC error 1726. When client program tried to call RPC call with specific paramters, it failed with
error 1726 and no logs was outputed by server program. So it seems that this RPC call is not running at server rounine.
Can you give me some suggestion about this issue ? Thanks.
Thanks
Regards
lewisHi,
Thanks for your post.
Did you have any firewall settings?
Meanwhile, please refer to this KB article for troubleshooting RPC error:
http://support.microsoft.com/kb/197814
Regards.
Vivian Wang -
Error in installing Oracle client 11g on Windows 2008 R2 (64bit) XenApp 6
I am trying to install "win64_11gR2_client.zip" Oracle 11g Client 64bit on Windows 2008 R2 that has been clamped and restricted by our security department. Details of the clamp:
http://support.microsoft.com/kb/885409
The Windows 2008 R2 server is running on CITRIX XenApp 6.
When we try to install the client on a normal version of Windows 2008 R2 without the Clamp, the installation follows through and successfully. However, when we try to install the 11g Client on the Clamped Windows 2008 R2, we get the error below:
[INS-08802] Unable to instantiate the View class referred by View ID 'SummaryUI'
This indicates the primary issue is with the clamp. My issue now is knowing what exactly is causing the error. what restrictions should I enable from the clamp in order to get the installation working?
Here is the error log:
Error log:
INFO: Loading data from: jar:file:/C:/Users/setupc/AppData/Local/Temp/OraInstall2011-10-10_04-13-35PM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Loading beanstore from jar:file:/C:/Users/setupc/AppData/Local/Temp/OraInstall2011-10-10_04-13-35PM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Restoring class oracle.install.driver.oui.ConfigCmdMappings from jar:file:/C:/Users/setupc/AppData/Local/Temp/OraInstall2011-10-10_04-13-35PM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Verifying target environment...
INFO: Checking whether the IP address of the localhost could be determined...
INFO: Completed verification of target environment.
INFO: Inventory exists: false
INFO: Registering setup bean
INFO: Building Flow
INFO: Building the flow graph
INFO: Loaded state init
INFO: Loaded state clientInstallType
INFO: Loaded state productLanguage
INFO: Loaded state getOracleHome
INFO: Loaded state prereqExecutionDecider
INFO: Loaded state checkPrereqs
INFO: Loaded state postPrereqs
INFO: Loaded state summary
INFO: Loaded state clientCustomInstall
INFO: Loaded state schedulerAgent
INFO: Loaded state mtsDialog
INFO: Loaded state setup
INFO: Loaded state finish
INFO: Linking states
INFO: State[checkPrereqs]: route=success; to=summary
INFO: State[clientCustomInstall]: route=TO_ENDCUSTOM; to=prereqExecutionDecider
INFO: State[clientCustomInstall]: route=TO_ORAMTS; to=mtsDialog
INFO: State[clientCustomInstall]: route=TO_SCHEDULERAGENT; to=schedulerAgent
INFO: State[clientInstallType]: route=ic_no; to=productLanguage
INFO: State[clientInstallType]: route=ic_yes; to=getOracleHome
INFO: State[getOracleHome]: route=INVENTORY_NO; to=prereqExecutionDecider
INFO: State[getOracleHome]: route=INVENTORY_NO_CUSTOM_YES; to=clientCustomInstall
INFO: State[getOracleHome]: route=INVENTORY_YES; to=prereqExecutionDecider
INFO: State[getOracleHome]: route=INVENTORY_YES_CUSTOM_YES; to=clientCustomInstall
INFO: State[init]: route=success; to=clientInstallType
INFO: State[mtsDialog]: route=success; to=prereqExecutionDecider
INFO: State[postPrereqs]: route=CUSTOM; to=clientCustomInstall
INFO: State[postPrereqs]: route=NON_CUSTOM; to=summary
INFO: State[prereqExecutionDecider]: route=executeprereqs; to=checkPrereqs
INFO: State[prereqExecutionDecider]: route=ignoreprereqs; to=summary
INFO: State[productLanguage]: route=productlanguage_yes; to=getOracleHome
INFO: State[schedulerAgent]: route=TO_ENDCUSTOM; to=prereqExecutionDecider
INFO: State[schedulerAgent]: route=TO_ORAMTS; to=mtsDialog
INFO: State[setup]: route=success; to=finish
INFO: State[summary]: route=success; to=setup
INFO: Successfully built the flow
INFO: Opening bean stores from which the beans can be loaded
INFO: Loading beanstore from a given input stream
INFO: Translating external format into raw format
INFO: Registering the flow data beans
INFO: [INS-07001] Value for property 'INSTALL_TYPE' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_WindowsSystemDirectory' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_LaunchNetCA' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_NoMigration' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_RACInstall' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_ConfigurationType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_InstallType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_InstallEdition' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_CustomComponents' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_OraMTSPortNumber' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentHostName' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentPortNumber' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_HOME' not found in the bean store.
INFO: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_BASE' not found in the bean store.
INFO: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
INFO: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
INFO: [INS-07001] Value for property 'UNIX_GROUP_NAME' not found in the bean store.
INFO: [INS-07001] Value for property 'INVENTORY_LOCATION' not found in the bean store.
INFO: [INS-07001] Value for property 'SELECTED_LANGUAGES' not found in the bean store.
INFO: [INS-07001] Value for property 'COLLECTOR_RESPONSE_FILE' not found in the bean store.
INFO: [INS-07001] Value for property 'MYORACLESUPPORT_USERNAME' not found in the bean store.
INFO: [INS-07001] Value for property 'MYORACLESUPPORT_PASSWORD' not found in the bean store.
INFO: [INS-07001] Value for property 'DECLINE_SECURITY_UPDATES' not found in the bean store.
INFO: [INS-07001] Value for property 'PROXY_HOST' not found in the bean store.
INFO: [INS-07001] Value for property 'PROXY_PORT' not found in the bean store.
INFO: [INS-07001] Value for property 'PROXY_USER' not found in the bean store.
INFO: [INS-07001] Value for property 'PROXY_PWD' not found in the bean store.
INFO: [INS-07001] Value for property 'SECURITY_UPDATES_VIA_MYORACLESUPPORT' not found in the bean store.
INFO: [INS-07001] Value for property 'COLLECTOR_IGNORE_FAILURES' not found in the bean store.
INFO: [INS-07001] Value for property 'COLLECTOR_IGNORE_CONFIGURATION' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_HOSTNAME' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_WindowsSystemDirectory' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_LaunchNetCA' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_NoMigration' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_RACInstall' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_db_ConfigurationType' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_db_InstallType' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_db_InstallEdition' not found in the bean store.
WARNING: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
WARNING: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
WARNING: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
WARNING: [INS-07001] Value for property 'OCMSettings' not found in the bean store.
INFO: Set value for bean ClientSetupBean
INFO: [INS-07001] Value for property 'INSTALL_TYPE' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_WindowsSystemDirectory' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_LaunchNetCA' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_NoMigration' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_RACInstall' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_ConfigurationType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_InstallType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_InstallEdition' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_CustomComponents' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_OraMTSPortNumber' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentHostName' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentPortNumber' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_HOME' not found in the bean store.
INFO: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_BASE' not found in the bean store.
INFO: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
INFO: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
WARNING: Failed to load bean oracle.install.ivw.client.bean.ClientInstallSettings. Reason: [INS-07001] Value for property 'ClientInstallSettings' not found in the bean store.
INFO: Closing bean stores from which the beans can be loaded
INFO: Registering the flow views
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.PrereqGUI viewId: null uiType: null]
INFO: oracle.install.commons.base.interview.common.view.PrereqGUI added to View Type Registry with the key as [PrereqUI]
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SummaryGUI viewId: null uiType: null]
INFO: oracle.install.commons.base.interview.common.view.SummaryGUI added to View Type Registry with the key as [SummaryUI]
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SetupGUI viewId: null uiType: null]
INFO: oracle.install.commons.base.interview.common.view.SetupGUI added to View Type Registry with the key as [SetupUI]
INFO: Adding View[type: oracle.install.ivw.common.view.ProductLanguageGUI viewId: ProductLanguageUI uiType: null]
INFO: oracle.install.ivw.common.view.ProductLanguageGUI added to View Type Registry with the key as [ProductLanguageUI]
INFO: Adding View[type: oracle.install.ivw.client.view.CustomInstallGUI viewId: null uiType: null]
INFO: oracle.install.ivw.client.view.CustomInstallGUI added to View Type Registry with the key as [CustomInstallUI]
INFO: Adding View[type: oracle.install.ivw.client.view.SchedulerAgentGUI viewId: null uiType: null]
INFO: oracle.install.ivw.client.view.SchedulerAgentGUI added to View Type Registry with the key as [SchedulerAgentUI]
INFO: Adding View[type: oracle.install.ivw.client.view.OraMTSGUI viewId: null uiType: null]
INFO: oracle.install.ivw.client.view.OraMTSGUI added to View Type Registry with the key as [OraMTSUI]
INFO: Adding View[type: oracle.install.ivw.client.view.InstallLocationGUI viewId: null uiType: null]
INFO: oracle.install.ivw.client.view.InstallLocationGUI added to View Type Registry with the key as [InstallLocationUI]
INFO: Adding View[type: oracle.install.ivw.client.view.InstallTypesGUI viewId: null uiType: null]
INFO: oracle.install.ivw.client.view.InstallTypesGUI added to View Type Registry with the key as [InstallTypesUI]
INFO: Adding View[type: oracle.install.ivw.client.view.FinishGUI viewId: null uiType: null]
INFO: oracle.install.ivw.client.view.FinishGUI added to View Type Registry with the key as [FinishUI]
INFO: Initial values of Setup Properties :
PROPERTY VALUE
COLLECTOR_IGNORE_CONFIGURATION false
COLLECTOR_IGNORE_FAILURES false
COLLECTOR_RESPONSE_FILE
DECLINE_SECURITY_UPDATES false
FROM_LOCATION C:\Dev Citrix Tools\Oracle Tools\Oracle 11g client Releas
e 2\client\install\../stage/products.xml
INSTALL_TYPE InstantClient
MYORACLESUPPORT_PASSWORD Protected value, not to be logged
MYORACLESUPPORT_USERNAME
ORACLE_BASE
ORACLE_HOME
ORACLE_HOSTNAME mndwg068cs.rad.afpaa.r.mil.uk
PROXY_HOST
PROXY_PORT
PROXY_PWD Protected value, not to be logged
PROXY_USER
SECURITY_UPDATES_VIA_MYORACLESUPPORT true
SELECTED_LANGUAGES {"en","en_GB"}
oracle_install_LaunchNetCA false
oracle_install_NoMigration true
oracle_install_RACInstall false
oracle_install_WindowsSystemDirectory
oracle_install_client_OraMTSPortNumber 49155
oracle_install_db_ConfigurationType
oracle_install_db_InstallEdition EE
oracle_install_db_InstallType
INFO: Launching Oracle Client Installer
INFO: Started executing the flow in INTERACTIVE mode
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state init
INFO: Waiting for completion all forked tasks at state init
INFO: All forked task are completed at state init
INFO: Completed background operations
INFO: Executing action at state init
INFO: Completed executing action at state <init>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <init>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <init>
INFO: Completed validating view at state <init>
INFO: Validating state <init>
WARNING: Validation disabled for the state init
INFO: Completed validating state <init>
INFO: Verifying route success
INFO: Get view named [InstallTypesUI]
INFO: size estimation for InstantClientinstall is 199.0705451965332
INFO: size estimation for Administratorinstall is 1068.0003070831299
INFO: size estimation for Runtimeinstall is 751.6538038253784
INFO: View for [InstallTypesUI] is oracle.install.ivw.client.view.InstallTypesGUI@2398dc19
INFO: Initializing view <InstallTypesUI> at state <clientInstallType>
INFO: InstallTypesPane installType is: InstantClient
INFO: Completed initializing view <InstallTypesUI> at state <clientInstallType>
INFO: Displaying view <InstallTypesUI> at state <clientInstallType>
INFO: Completed displaying view <InstallTypesUI> at state <clientInstallType>
INFO: Loading view <InstallTypesUI> at state <clientInstallType>
INFO: Completed loading view <InstallTypesUI> at state <clientInstallType>
INFO: Localizing view <InstallTypesUI> at state <clientInstallType>
INFO: size estimation for InstantClientinstall is 199.0705451965332
INFO: size estimation for Administratorinstall is 1068.0003070831299
INFO: size estimation for Runtimeinstall is 751.6538038253784
INFO: Completed localizing view <InstallTypesUI> at state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state clientInstallType
INFO: Completed executing action at state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Client Install Type set in InstallTypeUI is : Runtime
INFO: Validating view at state <clientInstallType>
INFO: Completed validating view at state <clientInstallType>
INFO: Validating state <clientInstallType>
WARNING: Validation disabled for the state clientInstallType
INFO: Completed validating state <clientInstallType>
INFO: In Transition of InstallTypesAction:
INFO: Verifying route ic_no
INFO: Get view named [ProductLanguageUI]
INFO: View for [ProductLanguageUI] is oracle.install.ivw.common.view.ProductLanguageGUI@1875a340
INFO: Initializing view <ProductLanguageUI> at state <productLanguage>
INFO: Completed initializing view <ProductLanguageUI> at state <productLanguage>
INFO: Displaying view <ProductLanguageUI> at state <productLanguage>
INFO: Completed displaying view <ProductLanguageUI> at state <productLanguage>
INFO: Loading view <ProductLanguageUI> at state <productLanguage>
INFO: Completed loading view <ProductLanguageUI> at state <productLanguage>
INFO: Localizing view <ProductLanguageUI> at state <productLanguage>
INFO: Completed localizing view <ProductLanguageUI> at state <productLanguage>
INFO: Fetching Available Languages...
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state productLanguage
INFO: Waiting for completion all forked tasks at state productLanguage
INFO: All forked task are completed at state productLanguage
INFO: Completed background operations
INFO: Executing action at state productLanguage
INFO: Completed executing action at state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: The languages in which the product will be installed are [en, en_GB]
INFO: Validating view at state <productLanguage>
INFO: Completed validating view at state <productLanguage>
INFO: Validating state <productLanguage>
INFO: Using default Validator configured in the Action class oracle.install.ivw.common.action.ProductLanguageAction
INFO: Completed validating state <productLanguage>
INFO: Verifying route productlanguage_yes
INFO: Get view named [InstallLocationUI]
WARNING: Active Help Content for InstallLocationPane.cbxOracleBases do not exist. Error :Can't find resource for bundle oracle.install.ivw.client.resource.ContextualHelpResource, key InstallLocationPane.cbxOracleBases.conciseHelpText
WARNING: Active Help Content for InstallLocationPane.cbxSoftwareLoc do not exist. Error :Can't find resource for bundle oracle.install.ivw.client.resource.ContextualHelpResource, key InstallLocationPane.cbxSoftwareLoc.conciseHelpText
INFO: View for [InstallLocationUI] is oracle.install.ivw.client.view.InstallLocationGUI@15837e8
INFO: Initializing view <InstallLocationUI> at state <getOracleHome>
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: Completed initializing view <InstallLocationUI> at state <getOracleHome>
INFO: Displaying view <InstallLocationUI> at state <getOracleHome>
INFO: Completed displaying view <InstallLocationUI> at state <getOracleHome>
INFO: Loading view <InstallLocationUI> at state <getOracleHome>
INFO: Completed loading view <InstallLocationUI> at state <getOracleHome>
INFO: Localizing view <InstallLocationUI> at state <getOracleHome>
INFO: Completed localizing view <InstallLocationUI> at state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state getOracleHome
INFO: Completed executing action at state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <getOracleHome>
INFO: Completed validating view at state <getOracleHome>
INFO: Validating state <getOracleHome>
INFO: custom prereq file name: oracle.client_Runtime.xml
INFO: refDataFile: C:\Dev Citrix Tools\Oracle Tools\Oracle 11g client Release 2\client\stage\cvu\oracle.client_Runtime.xml
INFO: isCustomRefDataFilePresent: false
INFO: InstallAreaControl exists: false
INFO: Checking:NEW_HOME
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:ORCA_HOME
INFO: Reading shiphome metadata from C:\Dev Citrix Tools\Oracle Tools\Oracle 11g client Release 2\client\install\..\stage\shiphomeproperties.xml
INFO: Loading beanstore from file:/C:/Dev Citrix Tools/Oracle Tools/Oracle 11g client Release 2/client/install/../stage/shiphomeproperties.xml
INFO: Translating external format into raw format
INFO: Restoring class oracle.install.driver.oui.ShiphomeMetadata from file:/C:/Dev Citrix Tools/Oracle Tools/Oracle 11g client Release 2/client/install/../stage/shiphomeproperties.xml
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: size estimation for Runtimeinstall is 751.6538038253784
INFO: PATH has :==>C:\Users\setupc\AppData\Local\Temp\OraInstall2011-10-10_04-13-35PM\jdk\jre\bin;.;C:\Windows\system32;C:\Windows;D:\ORADEV10g\jdk\jre\bin\classic;D:\ORADEV10g\jdk\jre\bin;D:\ORADEV10g\jdk\jre\bin\client;D:\ORADEV10g\jlib;D:\ORADEV10g\bin;D:\ORADEV10g\jre\1.4.2\bin\client;D:\ORADEV10g\jre\1.4.2\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\CA\SharedComponents\ScanEngine;C:\Program Files\CA\SharedComponents\CAUpdate\;C:\Program Files\CA\SharedComponents\ThirdParty\;C:\Program Files\CA\SharedComponents\SubscriptionLicense\;C:\Program Files\CA\eTrustITM;C:\Program Files (x86)\Citrix\system32\;C:\Program Files (x86)\Citrix\System32\Citrix\IMA;C:\Program Files (x86)\Citrix\System32\Citrix\IMA\Subsystems;C:\Windows\System32\Citrix\IMA;C:\Program Files (x86)\Citrix\system32;C:\Program Files (x86)\Common Files\Citrix\System32\
INFO: Completed validating state <getOracleHome>
INFO: InstallLocationAction to INVENTORY_NO
INFO: Verifying route INVENTORY_NO
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state prereqExecutionDecider
INFO: Completed executing action at state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <prereqExecutionDecider>
INFO: Completed validating view at state <prereqExecutionDecider>
INFO: Validating state <prereqExecutionDecider>
WARNING: Validation disabled for the state prereqExecutionDecider
INFO: Completed validating state <prereqExecutionDecider>
INFO: Verifying route executeprereqs
INFO: Get view named [PrereqUI]
INFO: View for [PrereqUI] is [email protected]2ac
INFO: Initializing view <PrereqUI> at state <checkPrereqs>
INFO: Completed initializing view <PrereqUI> at state <checkPrereqs>
INFO: Displaying view <PrereqUI> at state <checkPrereqs>
INFO: Completed displaying view <PrereqUI> at state <checkPrereqs>
INFO: Loading view <PrereqUI> at state <checkPrereqs>
INFO: Completed loading view <PrereqUI> at state <checkPrereqs>
INFO: Localizing view <PrereqUI> at state <checkPrereqs>
INFO: Completed localizing view <PrereqUI> at state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state checkPrereqs
INFO: custom prereq file name: oracle.client_Runtime.xml
INFO: refDataFile: C:\Dev Citrix Tools\Oracle Tools\Oracle 11g client Release 2\client\stage\cvu\oracle.client_Runtime.xml
INFO: isCustomRefDataFilePresent: false
INFO: Completed executing action at state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state checkPrereqs
INFO: Waiting for completion all forked tasks at state checkPrereqs
INFO: Creating PrereqChecker Job for leaf task Physical Memory
INFO: Creating CompositePrereqChecker Job for container task Free Space
INFO: Creating PrereqChecker Job for leaf task Free Space: mndwg068cs:C:\Users\setupc\AppData\Local\Temp
INFO: Creating PrereqChecker Job for leaf task Architecture
INFO: Creating PrereqChecker Job for leaf task Environment variable: "PATH"
INFO: CVU tracingEnabled = false
INFO: Nodes are prepared for verification.
INFO: *********************************************
INFO: Physical Memory: This is a prerequisite condition to test whether the system has at least 128MB (131072.0KB) of total physical memory.
INFO: Severity:IGNORABLE
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:mndwg068cs
INFO: Expected Value:128MB (131072.0KB)
INFO: Actual Value:3.9996GB (4193848.0KB)
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Free Space: mndwg068cs:C:\Users\setupc\AppData\Local\Temp: This is a prerequisite condition to test whether sufficient free space is available in the file system.
INFO: Severity:IGNORABLE
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:mndwg068cs
INFO: Expected Value:130MB
INFO: Actual Value:26.0185GB
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Architecture: This is a prerequisite condition to test whether the system has a certified architecture.
INFO: Severity:CRITICAL
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:mndwg068cs
INFO: Expected Value:64-bit
INFO: Actual Value:64-bit
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
INFO: Severity:CRITICAL
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:mndwg068cs
INFO: Expected Value:1023
INFO: Actual Value:791
INFO: -----------------------------------------------
INFO: All forked task are completed at state checkPrereqs
INFO: Completed background operations
INFO: Moved to state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <checkPrereqs>
INFO: Completed validating view at state <checkPrereqs>
INFO: Validating state <checkPrereqs>
INFO: Using default Validator configured in the Action class oracle.install.ivw.client.action.PrereqAction
INFO: Completed validating state <checkPrereqs>
INFO: Verifying route success
INFO: Get view named [SummaryUI]
WARNING: Failed to load the view [SummaryUI] . Reason: .
Refer associated stacktrace #oracle.install.commons.flow.ViewManager:367
INFO: Terminating all background operations
INFO: Terminated all background operations
SEVERE: [FATAL] [INS-08802] Unable to instantiate the View class referred by View ID 'SummaryUI'.
CAUSE: The given class do not represent a valid View class or an unexpected error occured while instantiating it.
ACTION: No additional information available.
SUMMARY:
- java.lang.NullPointerException.
Refer associated stacktrace #oracle.install.commons.util.exception.DefaultErrorAdvisor:370
INFO: Advice is ABORT
SEVERE: Unconditional Exit
INFO: Adding ExitStatus FAILURE to the exit status set
INFO: Finding the most appropriate exit status for the current application
INFO: Exit Status is -1
INFO: Shutdown Oracle Client Installer
INFO: Unloading Setup DriverHi;
Please see below note than Please see:
Master Note For Oracle Database Client Installation [ID 1157463.1]
*+<Moderator edit - MOS Doc content deleted - pl do not post contents of MOS Docs>+*
If notes not help than i suggest rise SR
Regard
Helios -
Error in installing windows 2008 r2 sp 1 element not found
error in installing windows 2008 r2 sp 1 element not found
Hi,
As Akash G says, would you please let us know the complete error message or provide a screenshot? It will help
us to go further.
In addition, would you please let me confirm whether install the Windows Server 2008 R2 Service Pack 1 via
Windows Update, or download the installation package and then install manually?
Please refer to the following article and check if can help you to solve this issue.
The error 0X80070490(Element not found) when you are installing a service pack or update
http://blogs.technet.com/b/asiasupp/archive/2011/06/20/the-error-0x80070490-element-not-found-when-you-are-installing-a-service-pack-or-update.aspx
By the way, you can also install the Service Pack 1 in
Clean Boot mode manually. Then please check if install successfully.
Hope this helps.
Best regards,
Justin Gu -
Error connecting to the SAP SRV on Windows 2008 Server platform
Hi All
We have a problem with one of our clients they bought a new sbs windows server 2008 and we loaded sql 2005 and sap b1 SP01 PL07.
When we did the SBO install we experience connection issues and we created odbc connection on the server using named pipes and tcp/ip (used both server name and Ip address).
We also configured the server in configuration manager and we managed to login and solved the slow system connection issue. We also created odbc connection on the client machines. (Machine are on a workgroup and users have administration access on all machines),we also installed native client on all machines.
After the first batch of client installs we managed to have connection, they were other computers which were left out during the first client install and now the client want to do the remaining machines connected to SBO. On every machine that we install now we get the same error :-
*Connection failed:
SQLState:'08001'
SQl Server error:10060
[Microsoft][SQL Native Client] TCP Provider: A connection attempt failed because the connected party didnot properly repsond after a period of time, or established connection failed because connected host has failed to respond.
Connectioin failed:
SQLState:'HYT00'
SQL Server Error:0
[Microsoft][SQL Native Client]Login timeout expired
Connection failed:
SQLState:'08001'
SQL Server Error: 10060
[Microsoft][SQL Native client] An error has occurred while establishing a connection to the server. When connecting to the sql server 2005, this failure may be cause by the that*
Please help as most user who need access can't login and they are the main users.
rgds,
Bongani DlaminiHi Eric,
yes we are using Windows 2008 SBS for the SAP EHP4 FOR SAP ERP 6.0/NW7.01 installation.
we tried to create the key but it says access is denied.
Actual thing is we got the server with Windows 2008 server 64 bit SBS (standard FE) with Domain Controller (DC) configuration.
We have removed the DC using dcpromo to convert into Wokgroup and tried the SAP installation.
I hope you got the idea and please let me know any further suggestions or it is the problem with the license.
Thanks & Regards,
Prabhu Reddy. -
BO XI 3.1 SP2 error while installing in Windows 2008 ENT Server 32 Bit
Hi
We have windows 2008 enterprise edition 32 Bit SP2 , While installing BO 3.1 SP2 we are getting the following error.
"Some files could not be created.
Please close all applications, reboot Windows and restart this installation."
1.we do have enough space as well as we are installing it through administrator account.
2.I increase the virtual memory size from 2 GB to 4 GB, still same error.
3.we downloaded the software in two diffrent machines. We tried extracting the "exe" file in two machine but still getting the same error.
4.We dont have any firewall connected and windows firewall is off.
Is there BO 3.1 Sp2 is available for windows 2008 ent server 32-Bit?
Because In the download site there is Windows Server on IA32 32-bit.
is it the correct version?
Please help us to solve this problem
ThanksWe have opened a ticket for this. After subsequent discussion with the forum support person we have installed BO Enterprise 3.1 SP2 fixed pack 2.5 on the server (Windows Server 2008 SP2). On the client side, we have also installed BO Enterprise 3.1 SP2 fixed pack 2.5 and Live Office SP2 fixed pack 2.5.
Once we tried to use the Web Intelligence document based on OLAP Universe in excel through Live Office it gives the following error.
"Failed to get the document information. (LO 26315) A database error occured. The database error text is: Failed to set properties (The component Microsoft® OLE DB Provider for Analysis Services returned server error (Database 'Sales' does not exist.)). (WIS 10901)(6315)". -
Windows Installer 4.5 Error while installing in windows 2008 32 bit
In windows 2008 server (standard edition), i am trying to install the exchange server 2007 sp2 before that i need to install the windows installer 4.5 to install my exchange server 2007sp2, while installing the windows installer 4.5 system showing the error
message as " Not enough storage is available to process this commend".
If any one pls give some suggestions as soon as is appreciative.
[email protected]
thanks
Shahul HameedHi,
The error message occurs if you are trying to use a private and undocumented SetupAPI function that isn’t supported in Windows Server 2008. Please
visit the following link for detailed information:
Misleading error message when you install an update package in Windows
Vista or in Windows Server 2008: "Not enough storage is available to process this command"
Please download the right version of Windows Installer 4.5 for Windows Server 2008 x86, you can download it from the following link:
Windows Installer 4.5
Best Regards
Dale
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ” -
Error while deploying Windows 2008 R2 using SCCM 2012 R2
I am trying to deploy Window 2008 R2 image (captured from a reference machine) using SCCM 2012 R2. I have integrated MDT 2013 with SCCM 2012 R2 and created an MDT task sequence. During deployment, towards the end of Applying image.wim, it gives me
an error that task sequence failed with the error code 0x80070002. And then the system reboots. After reboot, I am able to login to the Windows Server. It seems to work fine, but there are no applications etc installed. Also the _SMSTS log folder is still
present in the C drive. And in the smsts.log file, i can see errors like failed to copy unattend.xml file. Please help me.Hi,
Error code 0x80070002, it means the system cannot find file specified.
For more information, please review the link below:
Task Sequence Failed with the Error Code 0x80070002
http://prajwaldesai.com/task-sequence-failed-error-code-0x80070002/
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Error 406 access denied while trying to Add Windows 2008 HV host in SCVMM 2008.
I am trying to add Windows 2008 HV host in SCVMM 2008. While adding host i am getting error message...
Error (406)
Access
has been denied while contacting the server <server name>.
Recommended
Action
1.
Verify that the specified user account has administrative privileges on <server name>.
2.
Verify that DCOM access, launch, and activation permissions are enabled on <server name> for the Administrators group. Use dcomcnfg.exe to modify
permissions, and then try the operation again.
I have already done DCOM security modification for my user. I am able to RDP or any file sharing HV host from SCVMM machine. My user is member of local administrator for both the machines.
Before that i have added one Windows 2008 HV (Core) successfully and 2 ESX host in same SCVMM machine.
Any Help would be greatly appreciated.
vaibhavHas anyone found a fix for this? I've been troubleshooting this issue for 4 days now. I've unjoined/rejoined the host to the domain, deleted SCVMM certificate, given permissions (out the wahzoo) in COM/Access Permissions, all updates installed, firewall
is off (I even tried turning it on and configuring program/port access), I've tried with 3 different domain accounts that are a member of the local Administrators group.
The other day I managed to get the host added (don't ask me how) but then all the VM's were in status 'Host not responding' so I couldn't even manage them. So I removed it and now can't get the host added again. I'm using SCVMM 2008 R2 SP1 and the problem
host is Server 2008 R2 SP1 x64.
Error (406)
Access has been denied while contacting the server xxxxxxxx.domain.com.
Recommended Action
1. Verify that the specified user account has administrative privileges on xxxxxxx.domain.com.
2. Verify that DCOM access, launch, and activation permissions are enabled on xxxxxxx.domain.com for the Administrators group. Use dcomcnfg.exe to modify permissions, and then try the operation again.
I was getting this error after I got the host added:
Error (2910)
VMM does not have appropriate permissions to access the resource C:\Windows\system32\qmgr.dll on the xxxxxxxx.domain.com server.
(Access is denied (0x80070005))
Recommended Action
Ensure that Virtual Machine Manager has the appropriate rights to perform this action. -
KMS Error 0xC004F015 on Windows 2008 R2 - Does anyone have the correct fix for this please?
I am in the process of migrating my KMS server from Windows 2003 to Windows 2008 R2 64-bit. My Windows 2003 server has been happily providing my Windows 7 clients with licenses for well over a year. I have followed these migration steps in this forum article:
social.technet.microsoft.com/Forums/windows/en-US/cd4177bd-8df5-4a66-afdc-c760398b7e7f/migrating-kms-server-from-one-computer-to-another?forum=itprovistaactivation
I cannot get passed step 5. As soon as I try step 5 with my Windows 7 KMS key I receive error 0xC004F015. Despite reading countless articles on Microsoft forums and also speaking the Microsoft licensing who frankly were of no help at all, I am none the wiser
how to resolve this fault. My questions are:
1. Should my Windows 2008 R2 server be licensed with a MAK or KMS key? Does this matter?
2. Some articles I have read suggest if you use a Windows Server "C" license then you do not need to use a Windows 7 KMS key. I've tried this but it just tells me I have insufficient licenses.
3. When installing my windows 7 license key via the slmgr /ipk command should I be using my Windows 7 Professional KMS key? This works fine on my old Windows 2003 server, but Windows 2008 does not like it at all. Would I be better simply moving my KMS server
to a Windows 7 desktop instead?
4. I also want my Windows 2008 R2 to carry out my KMS activation for Office 2013. Can this run on the same server as my Windows 7 KMS key should I ever get it to work
Thank you anyone who can shed some light on this absolutely baffling error. Surely some one out there has the definitive answer.
Regards
N BuckI am in the process of migrating my KMS server from Windows 2003 to Windows 2008 R2 64-bit. My Windows 2003 server has been happily providing my Windows 7 clients with licenses for well over a year. I have followed these migration steps in this
forum article:
social.technet.microsoft.com/Forums/windows/en-US/cd4177bd-8df5-4a66-afdc-c760398b7e7f/migrating-kms-server-from-one-computer-to-another?forum=itprovistaactivation
I cannot get passed step 5. As soon as I try step 5 with my Windows 7 KMS key I receive error 0xC004F015. Despite reading countless articles on Microsoft forums and also speaking the Microsoft licensing who frankly were of no help at all, I am none the wiser
how to resolve this fault. My questions are:
1. Should my Windows 2008 R2 server be licensed with a MAK or KMS key? Does this matter?
2. Some articles I have read suggest if you use a Windows Server "C" license then you do not need to use a Windows 7 KMS key. I've tried this but it just tells me I have insufficient licenses.
3. When installing my windows 7 license key via the slmgr /ipk command should I be using my Windows 7 Professional KMS key? This works fine on my old Windows 2003 server, but Windows 2008 does not like it at all. Would I be better simply moving my KMS server
to a Windows 7 desktop instead?
4. I also want my Windows 2008 R2 to carry out my KMS activation for Office 2013. Can this run on the same server as my Windows 7 KMS key should I ever get it to work
Hi,
on your KMShost, if that is a WindowsServer OS, you cannot use a WindowsClient (WinVista/Win7/Win8/Win8.1) KMShost product key, you must use a WindowsServer KMShost product key.
Further, the KMShost product key must match the OS of the KMShost machine (or exceed/better it).
e.g. if your KMShost machine is WS2008R2, you must use a WS2008R2 (or higher e.g. WS2012 or WS2012R2) product key.
If you will use a higher product key, you will need to install the relevant patch package to do so.
When you install a Windows KMShost product key onto a machine, the Windows KMShost product key completely replaces the previous Windows product key of that machine [it serves two purposes, (1) replace the previous key, (2) activates the KMShost feature].
So, your KMShost is neither licensed as MAK nor KMS, it becomes a KMShost.
For WS2008R2 KMShosts, you can install one of 3 types (channels/groups) of KMshost pkey.
The channel/group pkey you choose, is based upon the maximum product editions you wish to perform KMSclient activations for.
http://technet.microsoft.com/en-us/library/ff793411.aspx
For your issue #2, are you attempting to install your Windows7 KMS key upon the KMShost or a KMSclient?
For your issue #3, are you attempting this upon a KMSclient? (Volume License editions on Win7Pro or Win7Ent, are already pre-loaded with a KMSclient pkey, so you should have no need to alter the client keys). As previously mentioned, no Win7 key is needed/possible
for the KMShost, if the KMShost is WS2008R2.
For your issue #4, yes, your WS2008R2 KMShost can also act as KMShost for Office2010 and/or Office2013, this requires a further patch, and the installation of the relevant Office KMShost pkey.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!) -
Windows 2008 R2 backup fails with event 521 error code 2155348001
Windows Server 2008 R2 SP1. Hyper-V role installed.
OS on drive C. All VMs stored on Drive D.
I am attempting to run a Bare Metal backup of the host system to a network share.
Drive D is not included in the backup job. I am getting the following error:
Log Name: Application
Source: Microsoft-Windows-Backup
Date: 1/10/2014 11:28:52 PM
Event ID: 521
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: SHAQTUS.scdl.local
Description:
The backup operation that started at '2014-01-11T04:08:50.683000000Z' has failed because the Volume Shadow Copy Service operation to create a shadow copy of the volumes being backed up failed with following error code '2155348001'. Please review the event
details for a solution, and then rerun the backup operation once the issue is resolved.
Reviewing event details, as suggested, does not offer any solution.
I have tried the suggested solutions in other similar threads of increasing the timeout value with the registry entry.
This does not work.
I have not tried reregistering the VSS writers manually, as the only links I have found are for server 2003/2008 (not R2) and explicitly state that they won’t work on higher versions of the OS, since they now utilize manifests and the manual procedure could
cause problems for those servers. Haven't found similar procedures for 2008 R2.
I have been able to narrow this down a bit.
A Windows 2008 R2 SP1 server with Hyper-V installed – backup to a network share is successful;
Install the DPM 2012 agent – same backup fails with the 2155348001 error.
We use DPM 2012 to backup VMs, but DPM cannot perform a bare metal backup/restore of server and the 2012 version no longer has the DPMSRT feature.
I prefer to run Bare Metal Backup to a file server share.
Stuck on this one.
RickHi,
The issue is related to DPM, I would suggest you ask for help from DPM forums:
http://social.technet.microsoft.com/Forums/en-US/home?forum=dataprotectionmanager
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Hello,
We are currently using Windows Server Backup to backup three Hyper-V guests running on a Windows 2008 R2 host. Two guests are running Server 2008 R2 and one is running Windows 7. I have the backups going to a dedicated external disk drive.
WSB backs up the two 2008 R2 Hyper-V guests just fine. However, when attempting to backup the Windows 7 Hyper-V guest, I receive the following error:
Error in backup of <Windows 7.vhd> during read: Error [0x80070001] Incorrect function.
I ran a "vssadmin list writers" and all the VSS writers showed "Stable" with no errors. I have plenty of space on the external drive as well. I've read this article:
https://support.microsoft.com/kb/973455?wa=wsignin1.0#workaroundissue12 except that doesn't seem to be what I'm experiencing here.
Anyone have any suggestions?Hi,
As the other 2 guests could be backed up correctly, the issue should not be the Windows Server Backup feature.
First please refer to this article:
Backing Up and Restoring Virtual Machines
http://msdn.microsoft.com/en-us/library/dd405549(v=vs.85).aspx
Please check if all following requirements are met. Specifically please check if Integration Service is installed.
Backup (volume snapshot) Integration Service is installed and running in the child VM. The service name is "Hyper-V Volume Shadow Copy Requestor".
Windows 2000: Backup Integration Service is not supported.
The child VM must be in the running state.
The Snapshot File Location for the VM is set to be the same volume in the host operating system as the VHD files for the VM.
All volumes in the child VM are basic disks and there are no dynamic disks.
All disks in the child VM must use a file system that supports snapshots (for example, NTFS).
If you have any feedback on our support, please send to [email protected]
Maybe you are looking for
-
Graphic card replacement for hp pavilion elite hpe 550f
Been trying to get this replacement card for a while. Is there a new compatible one that I can install or replace. I appreciate the help. Thank you!
-
Dreamweave MX 2004...need help
Anyone in the Chicago area interested in assisting me in learning Dreamweaver from scratch please e-mail me. Let me know your fee and perhaps we both can benefit. Thanks much, Ted [email protected]
-
Program without inner join..
hi frds... i need help in the programming without using the inner join and views, i want to take data from 2 different table without join and views, give some sample codes or links it will help to us. by pari.. Edited by: Alvaro Tejada Galindo on F
-
Can more than one Indesign servers run at the same time in same machine ? i mean can indesign server cs5 and indesign server 5.5 run at the same machine at the same time ? Thnaks in advance ..
-
Hi Gurus, i have one question , is there any way we can track the history of tables growth. For example table A,B,C were created at the time of database creation in schema "ricky" . how we can track the tables growth in the form of report. Lets say w