Error 406 access denied while trying to Add Windows 2008 HV host in SCVMM 2008.

I am trying to add Windows 2008 HV host in SCVMM 2008. While adding host i am getting error message...
Error (406)
Access
has been denied while contacting the server <server name>.
Recommended
Action
1.
Verify that the specified user account has administrative privileges on <server name>.
2.
Verify that DCOM access, launch, and activation permissions are enabled on <server name> for the Administrators group. Use dcomcnfg.exe to modify
permissions, and then try the operation again.
I have already done DCOM security modification for my user. I am able to RDP or any file sharing HV host from SCVMM machine. My user is member of local administrator for both the machines.
Before that i have added one Windows 2008 HV (Core) successfully and 2 ESX host in same SCVMM machine.
Any Help would be greatly appreciated.
vaibhav

Has anyone found a fix for this? I've been troubleshooting this issue for 4 days now. I've unjoined/rejoined the host to the domain, deleted SCVMM certificate, given permissions (out the wahzoo) in COM/Access Permissions, all updates installed, firewall
is off (I even tried turning it on and configuring program/port access), I've tried with 3 different domain accounts that are a member of the local Administrators group.
The other day I managed to get the host added (don't ask me how) but then all the VM's were in status 'Host not responding' so I couldn't even manage them. So I removed it and now can't get the host added again. I'm using SCVMM 2008 R2 SP1 and the problem
host is Server 2008 R2 SP1 x64.
Error (406)
Access has been denied while contacting the server xxxxxxxx.domain.com.
Recommended Action
1. Verify that the specified user account has administrative privileges on xxxxxxx.domain.com.
2. Verify that DCOM access, launch, and activation permissions are enabled on xxxxxxx.domain.com for the Administrators group. Use dcomcnfg.exe to modify permissions, and then try the operation again.
I was getting this error after I got the host added:
Error (2910)
VMM does not have appropriate permissions to access the resource C:\Windows\system32\qmgr.dll on the xxxxxxxx.domain.com server.
(Access is denied (0x80070005))
Recommended Action
Ensure that Virtual Machine Manager has the appropriate rights to perform this action.

Similar Messages

I receive "Database access denied" when trying to add component 4543BD

I receive "Database access denied" when trying to add component 4543BD to my schematic. This component was added from a previous version. I'm using Multisim version 12.0.0 Student edition.
Solved!
Go to Solution.

Hi Diarra,
I checked my database and the 4543 is not in the Student Edition. If you opened a schematic that was created in a higher version such as the Educaiton Edition and copied the part to your database, when you place this part you will get the access denied message.
Attached is a schematic with the part, you can open it and build you circuit around it.
Tien P.
National Instruments
Attachments:
4543.ms12 ‏62 KB

Can I add windows 2012 R2 host to VMM 2008 R2?

We are running VMM 2008 R2 on Windows 2008 R2. When attempting to add a Windows 2012 R2 as host to VMM, I receive this message:
Error (2915)
The WS-Management service cannot process the request. Object not found on the mdnjdqgxd2.xxxx server.
(Unknown error (0x80338000))
Can I add windows 2012 R2 host to VMM 2008 R2? If yes, what could be the problem?
Bob Lin, MCSE & CNE Networking, Internet, Routing, VPN Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Install and Configure Windows, VMware, Virtualization and Cisco on http://www.HowToNetworking.com

The VMM Server should never have the Hyper-V Role enabled.
The VMM 2008 can only be installed on 2012:
http://technet.microsoft.com/en-us/library/gg610562.aspx#BKMK_SupportedOS
You need to look at the support matrix of the SCVMM version and the Hyper-V Server Version.
http://technet.microsoft.com/en-us/library/gg610649.aspx
In this case it is beyond 'support' it is what actually will work.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
Disclaimer: Attempting change is of your own free will.

Getting error-"Process Access denied" while invoking Process as web service

Hi,
I have a very simple Business Process, just to take some input & give some String as output. I published this BP as web service on Oracle BPM - Process Administrator. I got its WSDL also. I can invoke startSession operation. But when I invoke the operation that is exposed by BP as web service, I am getting an error - "Process Access denied".
Please help to solve the issue, as I need it urgently.
Thanks,
Sujata

Hi Ariel,
Thanks for reply and sorry for delay on updating status. Actually our process server was having a problem, so I could not check the same in last 4 days. Now coming to the point....
I changed Process web service by changing authentication type as "Usernname token profile". I have not checked "Required HTTP Basic Authentication". As you said, WSDL got changed, it has removed startSession(). But when I invoke my actual operation, I am supposed to send authentication data (user name & password) in header.
I tried to send correct authentication info in header. But still I am getting an exception.
soapenv:Server.generalException - WSDoAllReceiver: Request does not contain required Security header
I feel header might be going wrong. I have taken header format from web service guide. I am attaching the entire request message taht I am sending, please tell me where I am going wrong...
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:sim="http://bea.com/albpm/Sample/SimpProc">
<soapenv:Header>
<wsse:Security soapenv:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wsswssecurity-secext-1.0.xsd">
<wsu:Timestamp xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<wsu:Created> 2010-06-01T19:23:29.774Z </wsu:Created>
<wsu:Expires> 2010-07-02T15:02:29.774Z </wsu:Expires>
</wsu:Timestamp>
<wsse:UsernameToken>
<wsse:Username>bpr_user</wsse:Username>
<wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wssusername-token-profile-1.0#PasswordText">bpruser12</wsse:Password>
</wsse:UsernameToken>
</wsse:Security>
</soapenv:Header>
<soapenv:Body>
<sim:sayHello>
<argInput>ss</argInput>
</sim:sayHello>
</soapenv:Body>
</soapenv:Envelope>
I cehcked with & without wsu:Timestamp. But same.....
Please give your suggestion.
Thanks
Sujata

Access Denied while trying to delete document

In SharePoint 2013, if the user ONLY has contribute access to a library, (user does not have access to the site) and if the user tries to delete a file, it throws an error message.
Access Denied: You do not have permission to perform this action or access this resource.
permission inheritance is broken on library level, Contribute Permission does have these options checked delete files, versions, and view application pages, but can not delete file.
If read access is provided to the site level, then user can delete file, why is that ?
using SharePoint 2013 Standard Edition.

Does the user get the error both from the ribbon and from the "...", "..." menu?
If a user has the Delete Items permission, but not the Use Remote Interfaces permission then they can delete files from the ribbon, but when attempting to delete from the content dropdown (Edit Control Block) will get Access Denied.
I'd like to try to duplicate your problem...
Is versioning enabled? Major or major and minor versions?
Is this consistent with all document types? .txt, pdf, docx, etc.
Is the file in a Document Set?
Is there a workflow running on the documents?
Is the document assigned to a custom Content Type?
Any other settings?
Mike Smith TechTrainingNotes.blogspot.com
Books:
SharePoint 2007 2010 Customization for the Site Owner,
SharePoint 2010 Security for the Site Owner

Error: 0x80040707 - Access Denied while installing itunes +ipod messed up

Yesterday morning my ipod (nano) was working fine, and i plugged it in to upload music and it said something about installing a new version of itunes on my ipod. i clicked yes, and somewhere during installation i assume, it got unplugged by one of my family members wanting to use a USB outlet. well, it deleted everything on my ipod, and then it wouldnt recognize my ipod in itunes.
i went to the site, did all the restore, restart, retry, crap until i got to reinstall. when i try to reinstall itunes, or remove "ipod for windows 01 -09-06" [not sure about that date] i get "Error: 0x80040707" in a popup window, then another saying "Access Denied"
Before i tried to reinstall itunes, it still wouldnt recognize my ipod either. when i plugged it in, it would say "removable disk: f" like it was just a usb memory stick or something. i really have no idea what to do as i am new with the whole itunes stuff, and have previously used musicmatch.
thanks

Hi there...grrr...I always hate this type of error because sometimes it is problematic to fix.
First off, remove iTunes and Quicktime and do a nice, fresh clean install. Save it to your harddrive and install it from there instead of running the installation over the internet.
Also, try this as it has helped a few with this particular bug
1. Run the setup program and PAY ATTENTION to the folder where you are installing the software. Keep clicking on the "Next" button and here it is, the progress bar.
2. When the progress bar reaches 100% and you get the 0x80040707 error message, DO NOT click "Accept" or "Ok" or whatever says the button in the error window. Instead proceed as I describe:
3. Go to the the folder where the program is supposed to be installed. Yes, it's there!. Copy this folder to another location (for example, to the desktop).
4. Now click "Accept" or "Ok" in the 0x80040707 error window. This will erase almost every file in the folder where the program was originally installed. Who cares? You have a copy of it.
5. Now overwrite this almost-empty original installation folder with the one you back-upped.
6. If you want you can even create manually a shortcut of the EXE file that launches the software wherever you like. Double click it.
Let me know if it helps. Anyone else with a suggestion, feel free to throw it out.
Rachyl

Access Denied when trying to add DP to Windows Server 2003

Hello. My environment is SCCM 2012 SP1. I have a Windows Server 2003 SP2 machine that I need to set a distribution point up on. I have all the prep work complete like IIS installed, local administrator, etc. I have also already setup 300 DPs successfully
on the same platform but for some reason this one is causing me problems. I have made sure that the secondary server I am setting the DP up from is in the local administrators group. However, I keep getting access denied errors. I have checked and can access
the ADMIN$ share on the machine. Any ideas what I am missing.
Failed to install ISAPI on server.lab.local, failed to copy E:\ConfigMgr12\bin\x64\..\i386\smsfileisapi.dll to
\\server.local.lab\ADMIN$\system32\inetsrv\smsfileisapi.dll, Win32 error = 5

Hi,
Have you tried to access \\server.local.lab\ADMIN$\system32\inetsrv or copy E:\ConfigMgr12\bin\x64\..\i386\smsfileisapi.dll to
\\server.local.lab\ADMIN$\system32\inetsrv\smsfileisapi.dll using the secondary site computer account?
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Bootcamp error on Mac mini while trying to install windows 7

Whlie I'm trying to install windows 7 on my Mac mini, it always say No bootable device -- insert boot disk and press any key. I tried restarting it and it still has the same screen. Now i can't even use my Mac mini :/
im using a cd for the windows 7.
somebody help me?

Probably ALT (but YMMV!)
BTW:
So I just shut down the Mac Mini by pressing the power button on the back
Probably best NOT to do this in future. Shut it down using the Apple Menu/Shut Down.

Error Message access denied when trying to install on SD Card

Hi,
I got this errormessage whan I'm trying to install the image about CMD (run as Admin):
C:\FFUTEST>dism.exe /Apply-Image /ImageFile:flash.ffu /ApplyDrive:\\.\PhysicalDr
ive1 /SkipPlatformCheck
Access is denied.
Does anybody know a solution?

Are you able to see the SD card in file explorer? When you performed the diskpart command sequence:
diskpart
list disk
exit
Did your SD card show up as physicaldrive1?
Is the SD card either 8 or 16 GB in size and Class 10?
Also, are you running this command on a Windows 10 install?
You might check that explorer or cmd don't have a reference to the SD card still. If a program is accessing the card that might prevent DISM from accessing it in exclusive mode.
Jonathan Tanner | Microsoft | Windows 10 IoT Core Insider Preview Support | This posting is provided 'as is' with no warranties and confers no rights.

Getting an error as "Access denied" while writing the data into CRM 2013?

Hi,
I have written code in Script component Transformation to connect CRM 2013. I have used CRM 2013 SDK to connect it.
#region
Help: Introduction to the Script Component
/* The Script Component allows you to perform virtually any operation that can be accomplished in
* a .Net application within the context of an Integration Services data flow.
* Expand the other regions which have "Help" prefixes for examples of specific ways to use
* Integration Services features within this script component. */
#endregion
#region
Namespaces
using
System;
using
System.Data;
using
Microsoft.SqlServer.Dts.Pipeline.Wrapper;
using
Microsoft.SqlServer.Dts.Runtime.Wrapper;
using
Microsoft.Xrm.Sdk;
using
Microsoft.Xrm.Sdk.Query;
using
Microsoft.Xrm.Sdk.Client;
using
Microsoft.Xrm.Sdk.Messages;
using
System.ServiceModel;
using
System.ServiceModel.Description;
#endregion
[Microsoft.SqlServer.Dts.Pipeline.
SSISScriptComponentEntryPointAttribute]
public
classScriptMain:
UserComponent
//This
method is called once, before rows begin to be processed in the data flow.
///You
can remove this method if you don't need to do anything here.
IOrganizationServiceorganizationservice;
// Variables for the CRM webservice credentials
// You could also declare them in the PreExecute
// if you don't use it anywhere else
stringCrmUrl =
stringCrmDomainName =
stringCrmUserName =
stringCrmPassWord =
publicoverridevoidPreExecute()
base.PreExecute();
         * Add your code here
CrmUrl =
this.Variables.CrmWebservice.ToString();
        CrmDomainName =
this.Variables.CrmDomainName.ToString();
        CrmUserName =
this.Variables.CrmUserName.ToString();
        CrmPassWord =
this.Variables.CrmPassWord.ToString();
// Connect to webservice with credentials
ClientCredentialscredentials =
newClientCredentials();
        credentials.UserName.UserName =
string.Format("{0}\\{1}",
CrmDomainName, CrmUserName);//"[email protected]";
        credentials.UserName.Password = CrmPassWord;
        organizationservice =
newOrganizationServiceProxy(newUri(CrmUrl),
null, credentials,
null);
///This
method is called after all the rows have passed through this component.
///You
can delete this method if you don't need to do anything here.
//</summary>
publicoverridevoidPostExecute()
base.PostExecute();
         * Add your code here
///<summary>
///This
method is called once for every row that passes through the component from Input0.
//<param
name="Row">The row that is currently passing through the component</param>
publicoverridevoidInput0_ProcessInputRow(Input0BufferRow)
         * Add your code here
EntityContact =
newEntity("Contact");
   Contact["Employeeid"] = Row.EmpId;
if (!Row.Prefix_IsNull)
    Contact["MiddleName"] = Row.Prefix;
organizationservice.Create(Contact);
I was getting an error when the Create method is called from Organizationservice object and it is executing fine till that method. Could you please suggest me how to go further on this?
Thanks &amp; Regards, Anil

Hi Anil,
You want to make sure you use lower case for both CRM entity and field names.
In any case, writing a custom script component to talk to CRM may not sound terribly hard, but as soon as you get more business requirements and you deal with more entities, you will find it is not something trivial.
For this reason, we highly recommend you check out a commercial offering which will actually save you a lot of time and effort. Check out our solution at http://www.kingswaysoft.com/products/ssis-integration-toolkit-for-microsoft-dynamics-crm/ for
further details, we offer many integration features for Microsoft Dynamics CRM you can't find elsewhere, such as Upsert, Text Lookup, many-to-many relationship support, various writing actions, etc.
Disclaimer: I work for KingswaySoft
Daniel Cai | http://danielcai.blogspot.com |
@danielcai | Data Integration made easy with
SSIS Integration Toolkit

Error while trying to backup - Microsoft.SqlServer.SmoExtended, Error 5 (access denied)

Hey guy,
I have a problem with my SQL Express Server.
If I try to backup a database I'm getting the following error:
(Microsoft.SqlServer.SmoExtended)
System.Data.SqlClient.SqlError: Das Sicherungsmedium 'D:\my-database.bak' kann nicht geöffnet werden. Betriebssystemfehler 5(Access denied). (Microsoft.SqlServer.Smo)
I have done this a month ago and it worked.
Can someone help me please?
I am logged in as sa, the OS is Windows Server 2012 Essentials.
Thanks
Regards,
Alex

'D:\my-database.bak' kann nicht geöffnet werden. Betriebssystemfehler 5(Access denied). (Microsoft.SqlServer.Smo)
Hi,
Since error is access denied it means SQL server service account ,the account with which SQL Server service is running, does not have read/write privilege on folder where you are taking backup. It does not matters whether you login with SA.
Now I see you are backing database to root(D:) drive. This should not be practiced its a bad practice and has lots of drawbacks. Instead create a folder BACKUP in D rive and give SQL Server service account read write privileges on that folder and start backup
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles

Error -9672 while trying to add printer

I had a printer connected via USB directly to my iMac 20 (OSX 10.4.11) that was working fine.
This morning, I moved the USB connection from the iMac 20 to the Airport base station so I could access and use the printer wirelessly from a MacBook Pro (OSX 10.5.6). The MacBook Pro sees and can send print jobs to the printer.
The iMac 20 can also see the printer It shows up in the Printer Browser list (with Bonjour as the Connection), but when I try to add it to the printer list in Print & Fax, I get "An error occurred while trying to add the selected printer. Error: -9672"
I can't get a clear explanation of what the error is, and all Apple support articles on getting things corrected have been unsuccessful.
I've tried everything I can think of...anyone got any ideas of what's going on here?

Hi, one strange cure...
http://discussions.apple.com/thread.jspa?messageID=8592688&#8592688
More...
http://discussions.apple.com/thread.jspa?messageID=8491661&#8491661

Error while trying to add Master Data in S&OP

Hi,
I am getting the below error while trying to add new Master Data entries in S&OP. Can anyone help here please? I have added new items in the past, but did not get any error before.
code: MASTER_DATA_OPERATION_EXCEPTION
severity: INFO
description: Error during Stage 02 of Data Integration
log id: 08f6b26e-5981-4e21-ad65-17df697fdc62
I have also attached the screenshot and the new data i am trying to add.
Thanks,
Thahir Masdook

Hi Vivek,
I have added Master Data in the past as well. Recently this system (Z45) was upgraded and the planning area was re-activated by my Project Lead. After the re-activation i am unable to add any Master Data and Save.
Thanks,
Thahir Masdook

ORA-20600 error while trying to add RAC database

I'm receiving the following error while trying to add the RAC database in grid control. Any idea?.
ORA-20600: The specified target is in the process of being deleted
This database doesn't exists in targets. But, I'm still unable to add.

Check the metalink Note: Unable To Add Rac Database To Grid Control Getting Error Ora-20600 [ID 1218797.1]
You need to wait for a while and check the status.

An error occurred while trying to add selected printer

I have a imac osx 10.7.3 and I am trying to reset my printer because my computer says an error occured while trying to add selected printer. When I push the control button and push the add button nothing happens am I doing something wrong.

found out what to do

Error 406 access denied while trying to Add Windows 2008 HV host in SCVMM 2008.

Similar Messages

Maybe you are looking for