Windows 7 not registering IPv4 address in DNS
We have been testing Windows 7 and noticed that the Windows 7 systems are not registering the IPv4 information in the DNS though IPv6 information is registered in the DNS. These test systems are in-place-upgrades from Windows Vista to Windows 7. The Windows 7 systems access the Internet and our internal networks just fine. We noticed the problem when we tried to RDC to the Windows 7 systems through a VPN connection and through our Citrix services. We are able to connect using RDC by entering the IP address of any of the Windows 7 systems. Once we issue the ipconfig /registerdns command we are then able to connect using the IPv4 DNS resolution.
W7 = Windows 7
WV = Windows Vista
C:\>nslookup w7-sbarnett.ciwmb.calepa.local
Server: wmbdns.ciwmb.calepa.local
Address: 156.41.165.20
Name: w7-sbarnett.ciwmb.calepa.local
Address: 2002:9c29:a620::9c29:a620
C:\>nslookup wv-jrodarte.ciwmb.calepa.local
Server: wmbdns.ciwmb.calepa.local
Address: 156.41.165.20
Name: wv-jrodarte.ciwmb.calepa.local
Addresses: 2002:9c29:a614::9c29:a614
156.41.166.20
C:\>ping -4 w7-sbarnett.ciwmb.calepa.local
Ping request could not find host w7-sbarnett.ciwmb.calepa.local. Please check the name and try again.
C:\Windows\system32>ping -4 wv-jrodarte.ciwmb.calepa.local
Pinging WV-JRODARTE.ciwmb.calepa.local [156.41.166.20] with 32 bytes of data:
Reply from 156.41.166.20: bytes=32 time<1ms TTL=128
Reply from 156.41.166.20: bytes=32 time<1ms TTL=128
Reply from 156.41.166.20: bytes=32 time<1ms TTL=128
Reply from 156.41.166.20: bytes=32 time<1ms TTL=128
Ping statistics for 156.41.166.20:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\>ping w7-sbarnett.ciwmb.calepa.local
Pinging w7-sbarnett.ciwmb.calepa.local [2002:9c29:a620::9c29:a620] from 2002:9c29:a614::9c29:a614 with 32 bytes of data:
Reply from 2002:9c29:a620::9c29:a620: time<1ms
Reply from 2002:9c29:a620::9c29:a620: time<1ms
Reply from 2002:9c29:a620::9c29:a620: time<1ms
Reply from 2002:9c29:a620::9c29:a620: time<1ms
Ping statistics for 2002:9c29:a620::9c29:a620:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\>ping wv-jrodarte.ciwmb.calepa.local
Pinging WV-JRODARTE.ciwmb.calepa.local [2002:9c29:a614::9c29:a614] from 2002:9c29:a614::9c29:a614 with 32 bytes of data:
Reply from 2002:9c29:a614::9c29:a614: time<1ms
Reply from 2002:9c29:a614::9c29:a614: time<1ms
Reply from 2002:9c29:a614::9c29:a614: time<1ms
Reply from 2002:9c29:a614::9c29:a614: time<1ms
Ping statistics for 2002:9c29:a614::9c29:a614:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
When we execute ipconfig /registerdns, we get the following:
C:\>nslookup w7-sbarnett.ciwmb.calepa.local
Server: wmbdns.ciwmb.calepa.local
Address: 156.41.165.20
Name: w7-sbarnett.ciwmb.calepa.local
Addresses: 2002:9c29:a620::9c29:a620
156.41.166.32
C:\>ping -4 w7-sbarnett.ciwmb.calepa.local
Pinging w7-sbarnett.ciwmb.calepa.local [156.41.166.32] with 32 bytes of data:
Reply from 156.41.166.32: bytes=32 time<1ms TTL=128
Reply from 156.41.166.32: bytes=32 time<1ms TTL=128
Reply from 156.41.166.32: bytes=32 time<1ms TTL=128
Reply from 156.41.166.32: bytes=32 time<1ms TTL=128
Ping statistics for 156.41.166.32:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
Here is the NIC configuration for the Windows 7 system:
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\sbarnett>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : W7-SBARNETT
Primary Dns Suffix . . . . . . . : ciwmb.calepa.local
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : ciwmb.calepa.local
calepa.local
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : ciwmb.calepa.local
Description . . . . . . . . . . . : Broadcom NetLink (TM) Gigabit Ethernet
Physical Address. . . . . . . . . : 00-1B-B9-B9-A3-02
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 156.41.166.32(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Thursday, October 29, 2009 8:36:37 AM
Lease Expires . . . . . . . . . . : Thursday, November 05, 2009 8:36:31 AM
Default Gateway . . . . . . . . . : 156.41.166.1
DHCP Server . . . . . . . . . . . : 156.41.165.12
DNS Servers . . . . . . . . . . . : 156.41.165.20
156.41.165.11
Primary WINS Server . . . . . . . : 156.41.165.12
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.ciwmb.calepa.local:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : ciwmb.calepa.local
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter 6TO4 Adapter:
Connection-specific DNS Suffix . : ciwmb.calepa.local
Description . . . . . . . . . . . : Microsoft 6to4 Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2002:9c29:a620::9c29:a620(Preferred)
Default Gateway . . . . . . . . . : 2002:c058:6301::c058:6301
DNS Servers . . . . . . . . . . . : 156.41.165.20
156.41.165.11
NetBIOS over Tcpip. . . . . . . . : Disabled
C:\Users\sbarnett>
Has anyone come across this?
TIA
Jose
FWIW, I found another solution to this particular issue.
My environment happens to be using a Linux-based DHCP server (ISC DHCP) which isn't configured to dynamically update the DNS, based on our 2008 r2 domain controller. As such, I want the Win7 clients themselves to be able to update the DNS records on
the 2008 r2 server. The only way I could actually make this work for update the v4 address (since we do want to retain v6 capability) was to allow nonsecure updates for the zone containing the Win7 clients. Once I had changed that setting, one
affected Win7 machine was able to register its new IPv4 address successfully by ipconfig /registerdns. There were absolutely no errors in any event logs, so I had a hell of a time figuring out why the updates were failing.
My next task is to find out if it's possible for the Win7 systems to do this update securely. If anyone has info on that, I'd appreciate it!
Toggling the DNS settings from secure to nonsecure has resolved the issue for me. As this is not a desirable change I am also researching a way to make the Windows 7 machines "secure". I noticed this is an old topic but this is a new problem for
me so if you did find a solution to this please let me know. Thank you for the helpful information!
Similar Messages
-
IPhones not taking ipv4 addresses on Unified Wireless (WLC 5508 and AP 3602)
This is a really odd one...
Earlier this week we started having issues with our BYOD wireless network (802.1x, WPA2+AES) but only with Apple devices (iphone and ipad). Employees with Android or Windows phones are not having any problems at all.
A brief summary of what's observable for the issue:
Radius authentication succeeds (PASS observable in ACS logs)
IPhone status viewed on both controllers (foreign anchor in DMZ as well as corporate WLC) shows phone associated.
Debug client output shows an IPv4 address is actually being assigned to the phone however it appears to ignore it and restart the DHCP request process so debug output shows what looks to be a loop of DHCP request and offer stages.
Infrastructure notes
Cisco WLC 5508s are all running 7.4.121.0 (tried rolling back to 7.2.110.0 .....didn't help)
APs are all 3602I-N-K9
DHCP for the BYOD network is running on the anchor in the DMZ however this was temporarily moved to a switch (had no effect).
Any ideas?
DHCP Loop:
*mmListen: Apr 30 11:44:50.476: a4:c3:61:7a:1a:4f 0.0.0.0 RUN (20) Fast Path rule (contd...) 802.1P = 0, DSCP = 0, TokenID = 15206 Local Bridging Vlan = 93, Local Bridging intf id = 12
*mmListen: Apr 30 11:44:50.476: a4:c3:61:7a:1a:4f 0.0.0.0 RUN (20) Successfully plumbed mobile rule (IPv4 ACL ID 255, IPv6 ACL ID 255)
*pemReceiveTask: Apr 30 11:44:50.476: a4:c3:61:7a:1a:4f Set bi-dir guest tunnel for a4:c3:61:7a:1a:4f as in Export Anchor role
*pemReceiveTask: Apr 30 11:44:50.476: a4:c3:61:7a:1a:4f 0.0.0.0 Added NPU entry of type 1, dtlFlags 0x4
*pemReceiveTask: Apr 30 11:44:50.476: a4:c3:61:7a:1a:4f Pushing IPv6: fe80:0000:0000:0000: 0c00:0c94:459e:a9db , and MAC: A4:C3:61:7A:1A:4F , Binding to Data Plane. SUCCESS !!
*DHCP Socket Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP received op BOOTREQUEST (1) (len 308,vlan 92, port 13, encap 0xec05)
*DHCP Socket Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP selecting relay 1 - control block settings:
dhcpServer: 172.24.13.251, dhcpNetmask: 0.0.0.0,
dhcpGateway: 0.0.0.0, dhcpRelay: 172.24.16.251 VLAN: 93
*DHCP Socket Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP selected relay 1 - 172.24.13.251 (local address 172.24.16.251, gateway 172.24.16.254, VLAN 93, port 13)
*DHCP Socket Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP transmitting DHCP DISCOVER (1)
*DHCP Socket Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP op: BOOTREQUEST, htype: Ethernet, hlen: 6, hops: 1
*DHCP Socket Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP xid: 0x7e549f4a (2119475018), secs: 0, flags: 0
*DHCP Socket Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP chaddr: a4:c3:61:7a:1a:4f
*DHCP Socket Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP ciaddr: 0.0.0.0, yiaddr: 0.0.0.0
*DHCP Socket Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP siaddr: 0.0.0.0, giaddr: 172.24.16.251
*DHCP Socket Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP selecting relay 2 - control block settings:
dhcpServer: 172.24.13.251, dhcpNetmask: 0.0.0.0,
dhcpGateway: 0.0.0.0, dhcpRelay: 172.24.16.251 VLAN: 93
*DHCP Socket Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP selected relay 2 - NONE
*DHCP Proxy Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP received op BOOTREPLY (2) (len 572,vlan 0, port 0, encap 0x0)
*DHCP Proxy Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP sending packet in EoIP tunnel to foreign 10.65.31.8 (len 346)
*DHCP Proxy Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP transmitting DHCP OFFER (2)
*DHCP Proxy Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP op: BOOTREPLY, htype: Ethernet, hlen: 6, hops: 0
*DHCP Proxy Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP xid: 0x7e549f4a (2119475018), secs: 0, flags: 0
*DHCP Proxy Task: Apr 30 11:44:50.480: a4:c3:61:7a:1a:4f DHCP chaddr: a4:c3:61:7a:1a:4f
*DHCP Proxy Task: Apr 30 11:44:50.480: a4:c3:61:7a:1a:4f DHCP ciaddr: 0.0.0.0, yiaddr: 172.24.16.102
*DHCP Proxy Task: Apr 30 11:44:50.480: a4:c3:61:7a:1a:4f DHCP siaddr: 0.0.0.0, giaddr: 0.0.0.0
*DHCP Proxy Task: Apr 30 11:44:50.480: a4:c3:61:7a:1a:4f DHCP server id: 0.0.0.0 rcvd server id: 172.24.13.251
*DHCP Socket Task: Apr 30 11:44:51.649: a4:c3:61:7a:1a:4f DHCP received op BOOTREQUEST (1) (len 308,vlan 92, port 13, encap 0xec05)
*DHCP Socket Task: Apr 30 11:44:51.649: a4:c3:61:7a:1a:4f DHCP selecting relay 1 - control block settings:
dhcpServer: 172.24.13.251, dhcpNetmask: 0.0.0.0,
dhcpGateway: 0.0.0.0, dhcpRelay: 172.24.16.251 VLAN: 93
*DHCP Socket Task: Apr 30 11:44:51.649: a4:c3:61:7a:1a:4f DHCP selected relay 1 - 172.24.13.251 (local address 172.24.16.251, gateway 172.24.16.254, VLAN 93, port 13)
*DHCP Socket Task: Apr 30 11:44:51.649: a4:c3:61:7a:1a:4f DHCP transmitting DHCP DISCOVER (1)
*DHCP Socket Task: Apr 30 11:44:51.649: a4:c3:61:7a:1a:4f DHCP op: BOOTREQUEST, htype: Ethernet, hlen: 6, hops: 1
*DHCP Socket Task: Apr 30 11:44:51.649: a4:c3:61:7a:1a:4f DHCP xid: 0x7e549f4a (2119475018), secs: 1, flags: 0
*DHCP Socket Task: Apr 30 11:44:51.649: a4:c3:61:7a:1a:4f DHCP chaddr: a4:c3:61:7a:1a:4f
*DHCP Socket Task: Apr 30 11:44:51.649: a4:c3:61:7a:1a:4f DHCP ciaddr: 0.0.0.0, yiaddr: 0.0.0.0
*DHCP Socket Task: Apr 30 11:44:51.649: a4:c3:61:7a:1a:4f DHCP siaddr: 0.0.0.0, giaddr: 172.24.16.251
*DHCP Socket Task: Apr 30 11:44:51.649: a4:c3:61:7a:1a:4f DHCP selecting relay 2 - control block settings:
dhcpServer: 172.24.13.251, dhcpNetmask: 0.0.0.0,
dhcpGateway: 0.0.0.0, dhcpRelay: 172.24.16.251 VLAN: 93
*DHCP Socket Task: Apr 30 11:44:51.649: a4:c3:61:7a:1a:4f DHCP selected relay 2 - NONE
*DHCP Proxy Task: Apr 30 11:44:51.649: a4:c3:61:7a:1a:4f DHCP received op BOOTREPLY (2) (len 572,vlan 0, port 0, encap 0x0)
*DHCP Proxy Task: Apr 30 11:44:51.649: a4:c3:61:7a:1a:4f DHCP sending packet in EoIP tunnel to foreign 10.65.31.8 (len 346)
*DHCP Proxy Task: Apr 30 11:44:51.649: a4:c3:61:7a:1a:4f DHCP transmitting DHCP OFFER (2)
*DHCP Proxy Task: Apr 30 11:44:51.649: a4:c3:61:7a:1a:4f DHCP op: BOOTREPLY, htype: Ethernet, hlen: 6, hops: 0
*DHCP Proxy Task: Apr 30 11:44:51.650: a4:c3:61:7a:1a:4f DHCP xid: 0x7e549f4a (2119475018), secs: 0, flags: 0
*DHCP Proxy Task: Apr 30 11:44:51.650: a4:c3:61:7a:1a:4f DHCP chaddr: a4:c3:61:7a:1a:4f
*DHCP Proxy Task: Apr 30 11:44:51.650: a4:c3:61:7a:1a:4f DHCP ciaddr: 0.0.0.0, yiaddr: 172.24.16.102
*DHCP Proxy Task: Apr 30 11:44:51.650: a4:c3:61:7a:1a:4f DHCP siaddr: 0.0.0.0, giaddr: 0.0.0.0
*DHCP Proxy Task: Apr 30 11:44:51.650: a4:c3:61:7a:1a:4f DHCP server id: 0.0.0.0 rcvd server id: 172.24.13.251
*DHCP Socket Task: Apr 30 11:44:53.754: a4:c3:61:7a:1a:4f DHCP received op BOOTREQUEST (1) (len 308,vlan 92, port 13, encap 0xec05)
*DHCP Socket Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP selecting relay 1 - control block settings:
dhcpServer: 172.24.13.251, dhcpNetmask: 0.0.0.0,
dhcpGateway: 0.0.0.0, dhcpRelay: 172.24.16.251 VLAN: 93
*DHCP Socket Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP selected relay 1 - 172.24.13.251 (local address 172.24.16.251, gateway 172.24.16.254, VLAN 93, port 13)
*DHCP Socket Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP transmitting DHCP DISCOVER (1)
*DHCP Socket Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP op: BOOTREQUEST, htype: Ethernet, hlen: 6, hops: 1
*DHCP Socket Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP xid: 0x7e549f4a (2119475018), secs: 3, flags: 0
*DHCP Socket Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP chaddr: a4:c3:61:7a:1a:4f
*DHCP Socket Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP ciaddr: 0.0.0.0, yiaddr: 0.0.0.0
*DHCP Socket Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP siaddr: 0.0.0.0, giaddr: 172.24.16.251
*DHCP Socket Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP selecting relay 2 - control block settings:
dhcpServer: 172.24.13.251, dhcpNetmask: 0.0.0.0,
dhcpGateway: 0.0.0.0, dhcpRelay: 172.24.16.251 VLAN: 93
*DHCP Socket Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP selected relay 2 - NONE
*DHCP Proxy Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP received op BOOTREPLY (2) (len 572,vlan 0, port 0, encap 0x0)
*DHCP Proxy Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP sending packet in EoIP tunnel to foreign 10.65.31.8 (len 346)
*DHCP Proxy Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP transmitting DHCP OFFER (2)
*DHCP Proxy Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP op: BOOTREPLY, htype: Ethernet, hlen: 6, hops: 0
*DHCP Proxy Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP xid: 0x7e549f4a (2119475018), secs: 0, flags: 0
*DHCP Proxy Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP chaddr: a4:c3:61:7a:1a:4f
*DHCP Proxy Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP ciaddr: 0.0.0.0, yiaddr: 172.24.16.102
*DHCP Proxy Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP siaddr: 0.0.0.0, giaddr: 0.0.0.0
*DHCP Proxy Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP server id: 0.0.0.0 rcvd server id: 172.24.13.251
*DHCP Socket Task: Apr 30 11:44:58.594: a4:c3:61:7a:1a:4f DHCP received op BOOTREQUEST (1) (len 308,vlan 92, port 13, encap 0xec05)
*DHCP Socket Task: Apr 30 11:44:58.594: a4:c3:61:7a:1a:4f DHCP selecting relay 1 - control block settings:
dhcpServer: 172.24.13.251, dhcpNetmask: 0.0.0.0,
dhcpGateway: 0.0.0.0, dhcpRelay: 172.24.16.251 VLAN: 93
*DHCP Socket Task: Apr 30 11:44:58.594: a4:c3:61:7a:1a:4f DHCP selected relay 1 - 172.24.13.251 (local address 172.24.16.251, gateway 172.24.16.254, VLAN 93, port 13)
*DHCP Socket Task: Apr 30 11:44:58.594: a4:c3:61:7a:1a:4f DHCP transmitting DHCP DISCOVER (1)
*DHCP Socket Task: Apr 30 11:44:58.594: a4:c3:61:7a:1a:4f DHCP op: BOOTREQUEST, htype: Ethernet, hlen: 6, hops: 1
*DHCP Socket Task: Apr 30 11:44:58.594: a4:c3:61:7a:1a:4f DHCP xid: 0x7e549f4a (2119475018), secs: 8, flags: 0
*DHCP Socket Task: Apr 30 11:44:58.594: a4:c3:61:7a:1a:4f DHCP chaddr: a4:c3:61:7a:1a:4f
*DHCP Socket Task: Apr 30 11:44:58.594: a4:c3:61:7a:1a:4f DHCP ciaddr: 0.0.0.0, yiaddr: 0.0.0.0
*DHCP Socket Task: Apr 30 11:44:58.594: a4:c3:61:7a:1a:4f DHCP siaddr: 0.0.0.0, giaddr: 172.24.16.251
*DHCP Socket Task: Apr 30 11:44:58.595: a4:c3:61:7a:1a:4f DHCP selecting relay 2 - control block settings:
dhcpServer: 172.24.13.251, dhcpNetmask: 0.0.0.0,
dhcpGateway: 0.0.0.0, dhcpRelay: 172.24.16.251 VLAN: 93
*DHCP Socket Task: Apr 30 11:44:58.595: a4:c3:61:7a:1a:4f DHCP selected relay 2 - NONE
*DHCP Proxy Task: Apr 30 11:44:58.595: a4:c3:61:7a:1a:4f DHCP received op BOOTREPLY (2) (len 572,vlan 0, port 0, encap 0x0)
*DHCP Proxy Task: Apr 30 11:44:58.595: a4:c3:61:7a:1a:4f DHCP sending packet in EoIP tunnel to foreign 10.65.31.8 (len 346)
*DHCP Proxy Task: Apr 30 11:44:58.595: a4:c3:61:7a:1a:4f DHCP transmitting DHCP OFFER (2)
*DHCP Proxy Task: Apr 30 11:44:58.595: a4:c3:61:7a:1a:4f DHCP op: BOOTREPLY, htype: Ethernet, hlen: 6, hops: 0
*DHCP Proxy Task: Apr 30 11:44:58.595: a4:c3:61:7a:1a:4f DHCP xid: 0x7e549f4a (2119475018), secs: 0, flags: 0
*DHCP Proxy Task: Apr 30 11:44:58.595: a4:c3:61:7a:1a:4f DHCP chaddr: a4:c3:61:7a:1a:4f
*DHCP Proxy Task: Apr 30 11:44:58.595: a4:c3:61:7a:1a:4f DHCP ciaddr: 0.0.0.0, yiaddr: 172.24.16.102
*DHCP Proxy Task: Apr 30 11:44:58.595: a4:c3:61:7a:1a:4f DHCP siaddr: 0.0.0.0, giaddr: 0.0.0.0
*DHCP Proxy Task: Apr 30 11:44:58.595: a4:c3:61:7a:1a:4f DHCP server id: 0.0.0.0 rcvd server id: 172.24.13.251
*DHCP Socket Task: Apr 30 11:45:07.059: a4:c3:61:7a:1a:4f DHCP received op BOOTREQUEST (1) (len 308,vlan 92, port 13, encap 0xec05)
*DHCP Socket Task: Apr 30 11:45:07.059: a4:c3:61:7a:1a:4f DHCP selecting relay 1 - control block settings:
dhcpServer: 172.24.13.251, dhcpNetmask: 0.0.0.0,Thanks Scott, here you go...
On Foreign:
WLAN Identifier.................................. 2
Profile Name..................................... BAI-Beta
Network Name (SSID).............................. BAI-Beta
Status........................................... Enabled
MAC Filtering.................................... Disabled
Broadcast SSID................................... Disabled
AAA Policy Override.............................. Disabled
Network Admission Control
Client Profiling Status ....................... Disabled
DHCP ......................................... Disabled
HTTP ......................................... Disabled
Radius-NAC State............................... Disabled
SNMP-NAC State................................. Disabled
Quarantine VLAN................................ 0
Maximum number of Associated Clients............. 0
Maximum number of Clients per AP Radio........... 200
Number of Active Clients......................... 42
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 86400 seconds
User Idle Timeout................................ 300 seconds
--More-- or (q)uit
User Idle Threshold.............................. 0 Bytes
NAS-identifier................................... CHTWLC
CHD per WLAN..................................... Enabled
Webauth DHCP exclusion........................... Disabled
Interface........................................ management
Multicast Interface.............................. Not Configured
WLAN IPv4 ACL.................................... unconfigured
WLAN IPv6 ACL.................................... unconfigured
mDNS Status...................................... Enabled
mDNS Profile Name................................ default-mdns-profile
DHCP Server...................................... Default
DHCP Address Assignment Required................. Enabled
Static IP client tunneling....................... Disabled
PMIPv6 Mobility Type............................. none
Quality of Service............................... Bronze
Per-SSID Rate Limits............................. Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Per-Client Rate Limits........................... Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
--More-- or (q)uit
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Scan Defer Priority.............................. 5,6
Scan Defer Time.................................. 100 milliseconds
WMM.............................................. Disabled
WMM UAPSD Compliant Client Support............... Disabled
Media Stream Multicast-direct.................... Disabled
CCX - AironetIe Support.......................... Enabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
CCX - Diagnostics Channel Capability............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
Passive Client Feature........................... Disabled
Peer-to-Peer Blocking Action..................... Disabled
Radio Policy..................................... All
DTIM period for 802.11a radio.................... 1
DTIM period for 802.11b radio.................... 1
Radius Servers
Authentication................................ 172.24.13.20 1812
Accounting.................................... Disabled
Dynamic Interface............................. Disabled
Dynamic Interface Priority.................... wlan
Local EAP Authentication......................... Disabled
--More-- or (q)uit
Security
802.11 Authentication:........................ Open System
FT Support.................................... Disabled
Static WEP Keys............................... Disabled
802.1X........................................ Disabled
Wi-Fi Protected Access (WPA/WPA2)............. Enabled
WPA (SSN IE)............................... Disabled
WPA2 (RSN IE).............................. Enabled
TKIP Cipher............................. Disabled
AES Cipher.............................. Enabled
Auth Key Management
802.1x.................................. Enabled
PSK..................................... Disabled
CCKM.................................... Disabled
FT-1X(802.11r).......................... Disabled
FT-PSK(802.11r)......................... Disabled
PMF-1X(802.11w)......................... Disabled
PMF-PSK(802.11w)........................ Disabled
FT Reassociation Timeout................... 20
FT Over-The-DS mode........................ Enabled
GTK Randomization.......................... Disabled
SKC Cache Support.......................... Disabled
--More-- or (q)uit
CCKM TSF Tolerance......................... 1000
WAPI.......................................... Disabled
Wi-Fi Direct policy configured................ Disabled
EAP-Passthrough............................... Disabled
CKIP ......................................... Disabled
Web Based Authentication...................... Disabled
Web-Passthrough............................... Disabled
Conditional Web Redirect...................... Disabled
Splash-Page Web Redirect...................... Disabled
Auto Anchor................................... Enabled
FlexConnect Local Switching................... Disabled
flexconnect Central Dhcp Flag................. Disabled
flexconnect nat-pat Flag...................... Disabled
flexconnect Dns Override Flag................. Disabled
FlexConnect Vlan based Central Switching ..... Disabled
FlexConnect Local Authentication.............. Disabled
FlexConnect Learn IP Address.................. Enabled
Client MFP.................................... Optional
PMF........................................... Disabled
PMF Association Comeback Time................. 1
PMF SA Query RetryTimeout..................... 200
Tkip MIC Countermeasure Hold-down Timer....... 60
AVC Visibilty.................................... Disabled
--More-- or (q)uit
AVC Profile Name................................. None
Flow Monitor Name................................ None
Call Snooping.................................... Disabled
Roamed Call Re-Anchor Policy..................... Disabled
SIP CAC Fail Send-486-Busy Policy................ Enabled
SIP CAC Fail Send Dis-Association Policy......... Disabled
KTS based CAC Policy............................. Disabled
Assisted Roaming Prediction Optimization......... Disabled
802.11k Neighbor List............................ Disabled
802.11k Neighbor List Dual Band.................. Disabled
Band Select...................................... Disabled
Load Balancing................................... Disabled
Multicast Buffer................................. Disabled
Mobility Anchor List
WLAN ID IP Address Status
2 172.24.13.251 Up
802.11u........................................ Disabled
MSAP Services.................................. Disabled
On Anchor:
WLAN Identifier.................................. 1
Profile Name..................................... BAI-Beta
Network Name (SSID).............................. BAI-Beta
Status........................................... Enabled
MAC Filtering.................................... Disabled
Broadcast SSID................................... Disabled
AAA Policy Override.............................. Disabled
Network Admission Control
Client Profiling Status ....................... Disabled
DHCP ......................................... Disabled
HTTP ......................................... Disabled
Radius-NAC State............................... Disabled
SNMP-NAC State................................. Disabled
Quarantine VLAN................................ 0
Maximum number of Associated Clients............. 0
Maximum number of Clients per AP Radio........... 200
Number of Active Clients......................... 48
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 86400 seconds
User Idle Timeout................................ 300 seconds
--More-- or (q)uit
User Idle Threshold.............................. 0 Bytes
NAS-identifier................................... CHADWLC01
CHD per WLAN..................................... Enabled
Webauth DHCP exclusion........................... Disabled
Interface........................................ bai-beta
Multicast Interface.............................. Not Configured
WLAN IPv4 ACL.................................... unconfigured
WLAN IPv6 ACL.................................... unconfigured
mDNS Status...................................... Enabled
mDNS Profile Name................................ default-mdns-profile
DHCP Server...................................... Default
DHCP Address Assignment Required................. Enabled
Static IP client tunneling....................... Disabled
PMIPv6 Mobility Type............................. none
Quality of Service............................... Bronze
Per-SSID Rate Limits............................. Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Per-Client Rate Limits........................... Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
--More-- or (q)uit
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Scan Defer Priority.............................. 5,6
Scan Defer Time.................................. 100 milliseconds
WMM.............................................. Disabled
WMM UAPSD Compliant Client Support............... Disabled
Media Stream Multicast-direct.................... Disabled
CCX - AironetIe Support.......................... Enabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
CCX - Diagnostics Channel Capability............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
Passive Client Feature........................... Disabled
Peer-to-Peer Blocking Action..................... Disabled
Radio Policy..................................... All
DTIM period for 802.11a radio.................... 1
DTIM period for 802.11b radio.................... 1
Radius Servers
Authentication................................ 172.24.13.20 1812
Accounting.................................... Disabled
Dynamic Interface............................. Disabled
Dynamic Interface Priority.................... wlan
Local EAP Authentication......................... Disabled
--More-- or (q)uit
Security
802.11 Authentication:........................ Open System
FT Support.................................... Disabled
Static WEP Keys............................... Disabled
802.1X........................................ Disabled
Wi-Fi Protected Access (WPA/WPA2)............. Enabled
WPA (SSN IE)............................... Disabled
WPA2 (RSN IE).............................. Enabled
TKIP Cipher............................. Disabled
AES Cipher.............................. Enabled
Auth Key Management
802.1x.................................. Enabled
PSK..................................... Disabled
CCKM.................................... Disabled
FT-1X(802.11r).......................... Disabled
FT-PSK(802.11r)......................... Disabled
PMF-1X(802.11w)......................... Disabled
PMF-PSK(802.11w)........................ Disabled
FT Reassociation Timeout................... 20
FT Over-The-DS mode........................ Enabled
GTK Randomization.......................... Disabled
SKC Cache Support.......................... Disabled
--More-- or (q)uit
CCKM TSF Tolerance......................... 1000
WAPI.......................................... Disabled
Wi-Fi Direct policy configured................ Disabled
EAP-Passthrough............................... Disabled
CKIP ......................................... Disabled
Web Based Authentication...................... Disabled
Web-Passthrough............................... Disabled
Conditional Web Redirect...................... Disabled
Splash-Page Web Redirect...................... Disabled
Auto Anchor................................... Enabled
FlexConnect Local Switching................... Disabled
flexconnect Central Dhcp Flag................. Disabled
flexconnect nat-pat Flag...................... Disabled
flexconnect Dns Override Flag................. Disabled
FlexConnect Vlan based Central Switching ..... Disabled
FlexConnect Local Authentication.............. Disabled
FlexConnect Learn IP Address.................. Enabled
Client MFP.................................... Optional
PMF........................................... Disabled
PMF Association Comeback Time................. 1
PMF SA Query RetryTimeout..................... 200
Tkip MIC Countermeasure Hold-down Timer....... 60
AVC Visibilty.................................... Disabled
--More-- or (q)uit
AVC Profile Name................................. None
Flow Monitor Name................................ None
Call Snooping.................................... Disabled
Roamed Call Re-Anchor Policy..................... Disabled
SIP CAC Fail Send-486-Busy Policy................ Enabled
SIP CAC Fail Send Dis-Association Policy......... Disabled
KTS based CAC Policy............................. Disabled
Assisted Roaming Prediction Optimization......... Disabled
802.11k Neighbor List............................ Disabled
802.11k Neighbor List Dual Band.................. Disabled
Band Select...................................... Disabled
Load Balancing................................... Disabled
Multicast Buffer................................. Disabled
Mobility Anchor List
WLAN ID IP Address Status
1 172.24.13.251 Up
802.11u........................................ Disabled
MSAP Services.................................. Disabled -
Services on Windows not registering
Hi,
I just downloaded the 10gR2 Client file from the oracle site and tried to install it with the Administrator option and it all seemed to be good as I did not receive any error, however when I tried to create my listener and view the status in the services to see if it was started or not, I noticed that there were no ORACLE events registered. I deinstalled and re-installed again to see if maybe there was a glich in the install but again, same issue. Why are the events not being registered on the Services for me to see or to start/stop. Is there something I am missing here?Yes. I did download the client. This is where all the problems started to be honest. When I installed it, I tried to connect to a remote DB and it kept saying that it could not identify the connect string. I checked the TNSnames file and it looked OK and I also did a test with NetManager and it worked but when I use SQL*Plus it was a no go...something went wrong and I am unsure what it is :(
-
Windows 7 - "Tick" the box DNS "Register this connection's addresses in DNS
Hi, i hope i have the right forum, this is DNS issue but on Windows 7 machines. I have been trawling the net looking for a fix. Basically we have some machines that are having DNS issues on various sites. I found one machine “register this connection’s addresses
in DNS” unticked. I could see it had a lease on our DHCP server and when I pinged the IP address it was responding. But pinging by hostname was failing. There was no A record in DNS Forward lookup zone nor IP address in reverse lookup zone. When I ticked
the “register this connection’s DNS Addresses in DNS” and executed the registerdns command, it was successful and I am able to ping it now.
Now, is there a way to do this via script to deploy via GP? Looks like no GPO setting fix. I have found numerous technets but nothing that resolves it. I specifically need to have the tick box for “register this connection’s addresses in DNS” ticked, nothing
else!
Can anyone assist?
Windows 7
DHCP – 2008 R2
ThanksHave you tried this ? http://computerstepbystep.com/register_dns_records_with_connection_specific_dns_suffix.html
-
I'm sure this is an obvious one but can't figure it out.
I have a Winserver 2008 Sp2 (x86) DC with a static IP address allocated to its only NIC. It seems to have acquired a second 169.254.x.x address automatically which I can't get rid of and which intermittently causes DNS problems (and possibly other)
problems.
ipconfig results are shown below:
C:\Users\Administrator.STRATIS2>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : STRATIS-SVR02
Primary Dns Suffix . . . . . . . : stratis2.local
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : stratis2.local
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) PRO/1000 XT Network Connection
Physical Address. . . . . . . . . : 00-0F-1F-67-B8-CE
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 10.11.128.1(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.0.0
IPv4 Address. . . . . . . . . . . : 169.254.140.227(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . : 10.11.128.99
DNS Servers . . . . . . . . . . . : 10.11.128.1
10.10.128.1
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter Local Area Connection* 8:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : isatap.{D60B08E6-D119-4CB8-BD18-380B7ED48
771}
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 9:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 02-00-54-55-4E-01
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Any ideas as to how this might have happened and how I get rid of it (a simple re-boot doesn't do the job).OK, I followed Syed's instructions. I noticed that under the registry entry HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ there were two AdaptorGUIDs, but only one of them had any parameters.
I created the IPAutoConfigurationEnabled parameter for both these AdaptorGUIDs with a value of 0 as instructed and re-booted.
Here are the registry entries for the two AdaptorGUIDs:
After re-booting I did another ipconfig /all, and the APIPA address is still there! Here's the ipconfig output:
C:\Users\Administrator.STRATIS2>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : STRATIS-SVR02
Primary Dns Suffix . . . . . . . : stratis2.local
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : stratis2.local
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) PRO/1000 XT Network Connection
Physical Address. . . . . . . . . : 00-0F-1F-67-B8-CE
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 10.11.128.1(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.0.0
IPv4 Address. . . . . . . . . . . : 169.254.62.149(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . : 10.11.128.99
DNS Servers . . . . . . . . . . . : 10.11.128.1
10.10.128.1
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter Local Area Connection* 8:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : isatap.{D60B08E6-D119-4CB8-BD18-380B7ED48
771}
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 9:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 02-00-54-55-4E-01
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
[it's a different APIPA address this time, but I guess it is randomly allocated].
Any further ideas for me?
Thanks
Nigel -
SapScript Data is not printing in Address window
Hi all,
I am having a problem regarding printing some values in a window of sapscript.It prints data in that window for some input and not for others input. The structure , which is being passed to this window is having values in print program all the cases. I get into the sapscript in debugging mode and found that the structure is having values fr all the test run ..But its still not printing in some cases.The window is coming as blank.
the code in the editor of the window is :
POSITION WINDOW
BOX FRAME 10 TW
AS <B>&ztfin-fld18'/'&&t_ztfin-fld18&</>
ADDRESS PARAGRAPH AD
ADDRESSNUMBER &DKADR-ADRNR&
TITLE &DKADR-ANRED&
NAME &DKADR-NAME1&, &DKADR-NAME2&, &DKADR-NAME3&, &DKADR-NAME4&
STREET &DKADR-STRAS&
POBOX &DKADR-PFACH& CODE &DKADR-PSTL2&
CITY &DKADR-ORT01&, &DKADR-ORT02&
POSTCODE &DKADR-PSTLZ&
COUNTRY &DKADR-LAND1&
REGION &DKADR-REGIO&
FROMCOUNTRY &W_CLERK_LAND&
ENDADDRESS
can sugest me something.
Reward poits guranteed.Hi Vijay..please have look in this..
Case: text is printed in address window
DKADR-ADRNR xxxx
DKADR-NAME1 xxxx
DKADR-STRAS xxx
DKADR-PFACH xxxx
DKADR-ORT01 xxx
DKADR-LAND1 xxx
DKADR-REGIO xxx
rest are blank
Case: text is not printed in address window
DKADR-ADRNR xxxx
DKADR-NAME1 xxxx
DKADR-NAME2 xxxx
DKADR-STRAS xxxx
DKADR-ORT01 xx
DKADR-LAND1 xx
rest are blank
is the Addresss CALL IS failing because of DKADR-REGIO = space ? -
I think my lap top has a lot more problems, then the sun has Hot spots! :)
(not that I am down playing any one's situation, nor want to sound cynical or Condescending).
Though many of my issues have been resolved through a LOT of time, tech support and a couple friends and personal researching.
But I get the "Class not Registered" Every time I try to update Windows,
(I have Mozilla Firefox 30 and Windows 8.1)
On Top of small Error box, I get EXE..on top. But Inside the error box "Class not Registered"
Some of the other issues or problems were self inflicted by not researching properly, so to say the least I am being extremely cautious.
I have the same issue with Class not Registered, and looking for some ideas or hopefully the solution.
After I try running a windows update and any updates for my virus scan "Defender" which is what I believe windows 8 and 8.1 uses, I am not sure about Vista or Windows 7 have, I never used them.
I went right to 8 through a new lap top. Then I got Windows 8.1 (that was about a month ago)
But if anyone does find or even know an answer please reply as soon as you are able, anyone else who may just be reading, if someone gets anything that did work for them, Please Let me know.
Due to time I couldn't read through more Forum suggestions or links that may work for
My Error EXE. "Class Not Registered" :)
BUT will return later in day. Maybe anything I found an answer for I can pass on. i Have had plenty issues since I had a type of crash (Or whatever it was when I was online with a Tech from Microsoft and and he had it so both of us could control the Arrow cursor, I double checked phone number for MS and it checked out legit,
That was the beginning of many days of constant repairing That was back around July 6th 2014 Thanks to everyone who even just reads this, BuddyDThis is might because of your prior change in softwares. so first you have to do run '''sfc''' in run command. and then you see the specific problem which causes this . Since System File Checker (sfc) scan will make Windows replace corrupt or missing system files on your computer.
* Click Start>All Programs>Accessories>right-click Command Prompt, and select Run as Administrator.
* Click Continue or supply Administrator credentials if prompted.
* In the Command Prompt window type the following, and press Enter:
sfc /scannow
Refer this KB article for more information:
http://support.microsoft.com/kb/929833
See this is not a problem of firefox till now. You can check more with microsoft answers site. -
We just have switched our local server from 32-bit to 64-bit machine and now we have Windows Server 2008 R2 Service
Pack 1 with MS Office 2007. On server we are running an application in ASP.Net 3.5 using visual studio
2008. All users have 32-bit windows 7 and MS Office 2007.
when user tries to import data from Excel to Database (SQL Server 2005), error comes as
"microsoft.ace.oledb.12.0 provider is not registered on local machine".
I have tried a solution by installing Access Database Engine 2007 Office System Driver on the Server, but the error
was same. Now what should I do to resolve this problem??? Should we install Office 2010 64-bit on the Server or is there any other solution???Hi,
Thanks for your posting.
the file can be made in excel 2007, try to install:2007 Office System Driver: Data Connectivity Components
http://www.microsoft.com/en-us/download/details.aspx?id=23734
Regards.
Vivian Wang
TechNet Community Support -
When I try to address an e-mail to an address in my iPad's Directory, the name comes up inside a pink block with a red circled exclamation point at the right hand end. "Clicking" on the red circle, gives me a pop-up saying the address is not registered for an iMessage. How do I register my Directory addresses for an iMessage??
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
Cheers, Tom -
I am trying to download Firefox, but Windows/Internet Explorer 8 is blocking it...saying the file is not registered/certified etc. I tried to upload the certificate, but it still won't let me do it. Seems like another Microsoft attempt to stop people from using competing software. How can I get around this so I can start using Firefox?
If the above doesn't work, your issue may be caused by Firefox files left from the previous install.
In this case, please delete the Firefox installation folder, which is located in one of these locations, by default:
*'''Windows:'''
**C:\Program Files\Mozilla Firefox
**C:\Program Files (x86)\Mozilla Firefox
If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
If the above doesn't work, please also delete the Firefox application data from your computer.
<b>WARNING: </b>Removing folders/files can cause damage to other programs and the Windows operating system. use caution when manually deleting folders/files. <u><b>Creating a backup of any deleted files is highly recommended!</b></u> -
Free adobe reader download is not registering in the windows registry
The free Adobe Reader is not registering in the WIndows registry
It usually WON'T create any registry entries until you've opened it, but it does create them.
-
I just bought a new iPad and can't get the text messaging to work. When I try to address the message a red exclamation point appears and says the person is not registered. How do I register them? They are already in my contacts list & they all are active in my iPhone text messaging.
Please Get the iPad User Manual for iOS 5.
-
I'm getting this error message: "User not registered for online use" when i'm trying to download music/ track names from a CD into ITunes on my Windows 8 PC. I'm registered and my itunes account/ appleID are all correct and working.
The ""not recognized for on-line use". error is associated with the Gracenote service that iTunes uses to look up and retrieve metadata for CDs. Some users have reported that this error occurs when trying to import from CD, subsequent to upgrading to version 12. A number of slightly different solutions have been reported (though all of a similar nature).
Try walking through the following steps - before starting you may have to enable hidden files and folders to be viewed - in Windows 7 / Windows Explorer select Organize > Folder and search options, then on the View tab make sure that Show hidden files, folders and drives is selected. Without this you won't see the AppData folder in C:\Users\username\
Exit iTunes
In Windows Explorer, go to the folder C:\Users\username\AppData\Roaming\Apple Computer\iTunes
Delete the following files:
CD Info.cidb
com.apple.iTunes.Gracenote.plist
Restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
If this doesn't work:
In iTunes, select Edit > Preferences and make a note (or take a screenshot) of your preferences settings in all relevant tabs
Exit iTunes
In Windows Explorer, go to the folder C:\Users\username\AppData\Roaming\Apple Computer\iTunes
Delete the following file:iTunesPrefs.xml
Restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
If this second procedure does work, you'll need to restore other iTunes preferences settings to those that you noted in step 1.
If this one didn't work:
Exit iTunes
Check the following folders:
C:\Users\username\AppData\Local\Apple Computer\iTunes
C:\Users\username\AppData\LocalLow\Apple Computer\iTunes
Delete any copies of the following files:
CD Info.cidb
com.apple.iTunes.Gracenote.plist
iTunesPrefs.xml
Restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
Again, if this procedure does work, you'll need to restore other iTunes preferences settings to those that you noted in step 1 of the second procedure. If you're still not able to retrieve CD info:
Exit iTunes
In Windows, select Start > Control Panel > Programs and Features. Find the entry for iTunes, right-click and select Repair.
When this process has finished, restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
If none of these have worked (and almost everything I've seen suggests you should be OK by this point), you may have an issue with the installation and configuration of iTunes itself. If you have got this far, see turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for advice on how to remove and replace of all components of iTunes. -
Employee Address Entry (Address Stype pop-up window not come in R12)
Hi
I have implemented Oracle HRMS (11.5.10.*). But now I am going to implement HRMS in R12 (12.0.6).
My Problem is, In 11i when I would want to enter any Employee Address a pop-up window come to select address style
by In R12 there is no pup-up window come. But My client requirement is to use different address style.
Anyone could help me to could i get the address style pup-up window.
Regards
MakshudHi Winnie
Unfortunately I have been sick and did not read the message before. I apologize.
I have not received help beyond what is on the page. But when I get I tell you.
I hope you can get answers. If you receive, I ask that you share with me.
thank you very much
best regards
AC
Date: Mon, 27 Feb 2012 09:33:10 -0700
From: [email protected]
To: [email protected]
Subject: Pop up Window before saving remembering the need (forcing) to fill required fields in a form
Re: Pop up Window before saving remembering the need (forcing) to fill required fields in a form
created by Win_Form in Forms - View the full discussion
Hi ACI wonder if you can share any responses on to your question above?I too have never used a script but, I have the same problems as you in regards to building a form. And wants to have the same 'protection' and message reminders for the end users. Any information, including a script and/or a contact email of experts you can share with me will help tremendously. Thank you so much in advance. Winnie
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4232307#4232307
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4232307#4232307. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Forms by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Acrobat will not register on Windows 8.1 computer
I have installed Acrobat 8 Professional on a new Windows 8.1 computer. It works, but every time I open the program it says it was not registered properly. If I ignore the warning the program still works, but I have a plug-in that I use that I have to register every time I use it.
Hi vbp printer,
Acrobat 8 on Windows 8.1 is an untested and unsupported configuration and you might face compatibility issues.
Please try running Acrobat 8 in compatibility mode and then check.
Regards,
Rave
Maybe you are looking for
-
Any program in finder blinks off every 5 seconds I have to hit the program to activate
Ihave an issue in finder any program I have open wil blink off every 5 seconds I will have to hit the openprogam to activate 5 seconds later it blinks off anyone have this issue? using OS9.2 Mavericks. Thanks Harold
-
hi, I've tried to install AnyConnect Secure Mobility Client on my computer (Mac OS 10.6.8), I've never installed it before on this computer, however when I want to install i got the message "Version 3.1.04063 of the Cisco AnyConnect Secure Mobility
-
Can't change desktop background OS 10.5.6
Hi, I'm on a Macbook 2.0Ghz-4 gig Ram-OS 10.5.6 When I go into preferences and attempt to change my desktop/background it freezes and crashes system preferences. If I double-click on the desktop the same thing happens. I read on an answered question
-
Every time I try to open an app it opens and then closes. how do i fix this?
how do I fix my ipad that closes the apps right after opening ?
-
Lightroom mysteriously deleted files after trying to convert RAW to DNG
Running Lightroom 1.3 on the MacPro 10.4.8 Strange thing happened. I had a catlogue of 11,824 photos yesterday. The catalog was a mix of RAW and dngs and I wanted to convert the remaining RAWs to DNGS. All photos were in place, no ? marks before I us