Windows 8.1 clean install in GPT hard drive style without loosing the RECOVERY partition

Always i try format my windows partition, i get the following error:
Windows cannot be installed to this disk. The selected disk is of the GPT partition style.
So i would like a clean install Windows 8.1 without chnage the hard drive style or loose my RECOVERY partition.
Obs.: I just can perform boot after disabling UEFI and Secure Boot.
This question was solved.
View Solution.

@lucasc ,
Hello and thank you for posting on the HP support forums. You will not be able to do this without damaging the recovery partition. If you want to do a fresh install on your system use the system recovery.
If not you will install the operating system of your choice. Before doing so make sure the notebook came with the operating system and you have supported drivers for the OS you want to install.
If not you may not be able to find supported drivers and end up with hardware issues. The drivers are built for the notebook based on the OS that it was released with and they are proprietary.
I hope this helps. Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Similar Messages

Changed hard drive: need to reinstall the recovery partition

Hi everyone. Some days ago I took my MBP to an Apple Authorized Reseller to update the hard drive to a new one and now I have a new 1TB/7200RPM hard drive.
Everything is perfect, but I think that the recovery partition is missing. If I look in the iCloud panel, the "Find my Mac" service is disabled because "recovery partition is needed".
But, if I run "diskutil list" in the Terminal, here's the result:
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.0 TB     disk0
   1:                        EFI                         209.7 MB   disk0s1
   2:                  Apple_HFS Luke                    998.6 GB   disk0s2
   3:                 Apple_Boot                         1.4 GB     disk0s3
Is the disk0s3 the recovery partition? If it's the recovery partition, why "Find my Mac" can't see it? Do I need to update or reinstall the recovery partion?
Here's a nice article I've found, but I don't know if it's right for my case: http://www.brunerd.com/blog/2012/03/21/update-create-lion-recoveryhd-partition-q uickly-without-reinstalling/
Waiting your answer. Thank you very much.

If you're referring to your disk0s3, I don't know. I don't know what that is or how it got there on your drive. I'm not sure if it should be deleted before you recreate your Recovery HD. Do a backup and then try the script and see what happens.
Not knowing what the technician did to put your system on the new hard drive, makes it difficult to tell you to delete disk0s3 before you put your Recovery HD on. I believe a normal install of ML onto a Mac OS X Extended-Journaled formatted hard drive with the GUID parition table has an EFI, Macintosh HD and Recovery partitions like below.
$ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *500.1 GB   disk0
   1:                        EFI                         209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD            499.2 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3

I have an iBook g4 14" 1.42 ghz. I recently installed a new hard drive. I put the install CD in. Then, I pressed the power button, then the "C" key. Black screen and No chiming. Please tell me, what I can do to resolve this? What is the problem with it?

I have an iBook g4 14" 1.42 ghz. I recently installed a new hard drive. I put the install CD in. Then, I pressed the power button, then the "C" key. Black screen and No chiming. Please tell me, what I can do to resolve this? What is the problem with it?

Since it will not boot then a hardware test can't be run. You could try FireWire Target Disk Mode and if it works then access from another Mac to run tests on the new drive. You could also try installing the OS X software from the host computer. If this does not work then professional help should be considered.
http://support.apple.com/kb/ht1661
http://osxdaily.com/2010/04/07/how-to-boot-a-mac-in-target-disk-mode/
http://www.macobserver.com/tmo/answers/how-to-use-target-disk-mode-to-boot-from- another-macs-hard-drive

HT4796 I want to transfer my itunes from a Windows 7 machine to a new Mac, iTunes on Windows has all content on an external hard drive. What is the recommended way to set up iTunes on my Mac so I don't lose access to my content

I want to transfer my itunes from a Windows 7 machine to a new Mac, iTunes on Windows has all content on an external hard drive. What is the recommended way to set up iTunes on my Mac so I don't lose access to my content

iTunes: How to move your music to a new computer

Is there a way to access my iTunes Library, which is stored on a (PC) External Hard Drive, on a MacBook Air (through an Apricorn Universal Hard Drive Adapter), without transferring the music files off of the external hard drive?

Is there a way to access my iTunes Library, which is stored on a (PC) External Hard Drive, on a MacBook Air (through an Apricorn Universal Hard Drive Adapter), without transferring the music files off of the external hard drive?
In other words, because the MacBook Air only has 120 gbs of hard drive space & my old hard drive, from a Lenovo, has 500 gbs of hard drive space (and I have over 120 gbs of music), I’m looking to manage my iTunes music from the external hard drive permanently. Upon attempting to access the iTunes library held on the external hard drive the following message comes up: “The iTunes Library.itl file is locked, on a locked disk, or you do not have write permission for this file”. Is there a way to get around this?
Any advice would be greatly appreciated, thanks so much!

You will have to engage a split library which means you will have to start answering questions on this forum because you will need to learn a lot about how iTunes works in order not that have a big mess at the end of it all. It also won't be easy when the time comes to relocate it all to different drives.
You can go to advanced preferences and turn off organize media and copy to items to media folder when adding items to library. Next read about how to selectively consolidate items to the external drive.
Sept. 2010, Consolidate selected content - https://discussions.apple.com/thread/2589812 and April 2014, https://discussions.apple.com/message/25414357
"...selected the new tracks directly in iTunes, Control-clicked on the selection, and saw that now you can consolidate selected items." - http://hints.macworld.com/article.php?story=20090919000326840
Remember that when you start iTunes without the external drive turned on iTunes will present you with a bunch of broken links. If you have automatic downloads enabled with iCloud you may have to turn that off to prevent iTunes from repopulating your drive trying to deal with those "missing" tracks.
If you add tracks in bunches to iTunes and want them to go to different media folders you will need to either add them by holding down the option key while dragging if the desired media folder is not the one set in preferences, or by changing the media folder in preferences. Changing media folder preferences only applies to new files added, not old ones.
Okay, I am going to stop typing because you might just reply to me, "Oh, okay, forget it," and I don't need the exercise.
What are the iTunes library files? - http://support.apple.com/kb/HT1660
More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
Where are my iTunes files located? - http://support.apple.com/kb/ht1391

How do I download all my photos onto an external hard drive intact without loosing iPhoto's features, important info and details? I need to delete pictures and files to make room in My mac's memory which is currently full.

Hi
How do I download all my photos onto an external hard drive intact without loosing iPhoto's features, important info and details? I need to delete pictures and files to make room in My mac's memory which is currently full.
Maro

So you want to move the iPhoto Library?
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD

Erased Hard Drive for Clean Install of Leopard, Hard drive is gone!

I put in my Leopard Install disk to do a clean install of everything as I was going to give this iMac to someone. I erased the hard drive and then started the Leopard install. It stopped half way through and that was that! Now the hard drive does not appear as my Macintosh HD anymore. When I open disc utility, it lists it as just a 150MB hard drive; no name, no volume. If I try to format it again, it says "resource busy". If I try to install Leopard, it just keeps looking for a drive to install it in. Bummer. Any ideas how I can get my hard drive to be recognized again? It is an iMac G5, 5 years old with no other problems before this. Thanks.

Try shutting down (powering off). Then start it up again using your Mac OS X installation disc, and run Disk Utility as you did before. This time, try going to the Partition tab (instead of using the Erase tab). Reset the +Volume Scheme+ to *1 Partition*, even if it already has only one partition. Click the Options button, and make sure it is set for *Apple Partition Map*. Name the volume +Macintosh HD+, set the Format to +Mac OS Extended (Journaled)+, and Apply.
See if that works any better.

Trying to clean install Mavericks but hard drive partitioned and won't allow

My MacBook Pro 2012 was set up with a partitioned hard drive. Now, as I upgrade from 10.8 to Mavericks, I'd like ot use the Disk Utility to erase the hard drive and then use the interface to install Mavericks, but it won't let me erase the hard drive.
On the left side of the Disk Utility, below the main hard drive, there are two drives noted, with the OS and something else.
Can you suggest how to do something here? I'm stuck halfway.

I'm not sure what you are doing, but if the Recovery HD is still there:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
           because it is three times faster than wireless.

BSOD experience with CLEAN INSTALL on new hard drive...next step?

Much has been written about the BSOD experiences of those upgrading to Leopard and the conflict with third party software enhancements already on their Tiger system. And apparently those fixes are working for some. I may be in the minority, but I own a Mac Pro and have a boot drive for Tiger and a second boot drive, brand new and zeroed out, on which I installed Leopard.
When I go to start Leopard, I get either the BSOD or it will go one step further, bring me to the Leopard desktop, then hang...with a movable mouse but no functionality. In my case, since I am doing a fresh install with no Tiger software on the new hard drive, what could be causing the conflict? Has anyone else out there experienced my specific problem? And have their been any suggestions posted on a fix for this situation.
Obviously the CLEAN INSTALL experience of Leopard is not immune from the installation BSOD problems of the TIGER UPGRADERS.
I would love to hear from others experiencing these BSOD issues with their CLEAN INSTALLS and any possible workarounds.
Many thanks,
John

I think the issue is installing 10.5 on a different drive than the boot drive. I would recommend swapping the drives, making the 10.5 the physical boot drive and Tiger the secondary.
I have done two clean installs on two different machines with no issue. A 3rd machine was upgraded with no issues as well.
Asking other users for sob stories helps no one. Asking for resolution however, is key.

Clean install on ext hard drive

I have a new 21" iMac arriving and plan on using external drives rather than the internal one. It's my first time installing OS X from the App Store to a new hard drive so I want to make sure I have the procedure correct.
From what I've read I can boot from the recovery partition by using CMD-R at start up and then set up WiFi and procede with the download to my new drive. Is that correct? I also want to make sure the boot partition is untouched. This will make it easier for me on resale because I won't have to copy my data over or do a reinstall of the OS. Installing via Recover will achieve these goals, Yes?
Thanks in advance. "Solved" credit will be given to first correct response.

Thanks for the confirmation.
I can't see how a desktop WD Black on USB 3 is going to be any slower than Apple's OEM internal 5200RPM laptop drive in the iMac. I like the greater flexibility, esp. in case of HD failure. If I use the iMac's int. drive and it fails I'm computer-less for days if not a full week, not to mention the time to schlep it to and back from the store. Also, as noted, if I keep the int. drive new then that is time saved when I go to sell.

Clean install of OXS - hard drive + extra internal

I'm getting ready to do a clean install on my harddrive but I'm wondering how (if at all) it will impact my 2nd internal drive...? Hopefully not at all...?? Please help!
Thanks
Carrie

Shouldn't have any impact since your 2nd internal drive is a separate drive.

Can I install a SECOND HARD DRIVE (ssd) on my x220i

For some reason I'm having problems finding the answer to this. I would like to install an ssd, but I would like to keep the existing hard drive for space. Is the a way to install a second hard drive (an ssd) into the x220i?
Thanks for any input!

You can install an SSD drive in the mSATA card slot.
See this: http://forums.storagereview.com/index.php/topic/29946-msata-ssd-update-my-thinkpad-x220i/

HT201250 installing a new hard drive in my iMac

Can I restart my iMac using my back up HD after installing a new hard drive. I bought my Mac with a 500 GB drive thinking this would be enough for a long time.
Whoops, Not with high res pictures and downloaded movies at 2 and 4 gigs each. I would like to install a 2 TB hard drive 3.5 instead.

The iMac's hard drive is rather difficult to get to. You can replace it but will have to get through the front panel, which is not a simple task. Additionally, on at least some systems (I believe the iMac is one of them) Apple uses a special hard drive firmware, without which the system fans will blare at full blast.
I'd recommend you get a large external drive (and perhaps consider a multi-disk array like a Drobo or Pegasus, among many others) that can give you expandable storage options. Alternatively, using multiple external drives is another option.

Windows cannot be installed to this disk 0. The selected disk has an MBR partition table. On EFI system, Windows can only be installed on GPT disks

Hi All,
I have been trying real hard to install Windows 8 on my Macbook Pro early 2011 model. I followed the instruction given by Bootcamp word to word, all things went very smoothly untill I was asked Windows Setup Instaled to selct the Hard drive. Here's the error:
"Windows cannot be installed to this disk 0. The selected disk has an MBR partition table. On EFI system, Windows can only be installed on GPT disks...."
Let me know guys what should I do?
Thanks,
Attiqe

You have started the Windows 8 installer in EFI mode, and you don't have to start in EFI mode on a Mac because your Mac emulates a BIOS and a MBR partition table in order to install Windows in non-EFI mode.
To start the Windows installer, hold the Option (Alt) key while your computer is starting and have a look at all the boot options you have. You should see two with a DVD above and they must be named "Windows" and "EFI Boot". Choose the option with "Windows" and follow the steps to install Windows. Note that you have to format the "BOOTCAMP" partition from the installer to be able to install Windows.
If you are trying to install Windows from a USB drive, note that your computer isn't compatible to do it

Mid 2010 iMac upgraded SSD, can't seem to install windows via bootcamp. Windows can't be installed on this storage device. The chosen harddisk contains a MBR-partition-table. Windows can only be installed on GPT-harddisks on EFI-systems error

I have windows 8.1 on DVD & on USB CF Reader/Card. I've followed the full steps in bootcamp, but when it restarts and its time to select the bootcamp partition to install windows (after alt rebooting to the efi startup) I get the "Windows can't be installed on this storage device. The chosen harddisk contains a MBR-partition-table. Windows can only be installed on GPT-harddisks on EFI-systems" error.
I've scoured the internet trying different solutions that seem to work for everyone else, but to no avail. I've reformatted from that screen, doesn't help. I've removed bootcamp partition and manually partitioned using disk util, leaving it empty once partition-wise, and filling it with a blank partition the second time. I've done a full back up and clean re-install of Yosemite, and nothing seems to be working.
Thats when I switched to DVD install, as I heard sometimes you can't install with a CF card. When I alt-boot, I can see EFI-windows and windows, but if I select EFI-windows, same problem as before, and if I select windows, I get the black screen of "no bootable device please insert boot disk and press any key."
I've been stuck w/o bootcamp for over 2 years now. Anyone, please help?
Mid 2010 iMac running 256gb SSD, Yosemite 10.10.1 trying to install windows 8.1

I am having the same problem. Windows is trying to install. It identifies the various partitions but says that I cannot install Windows on the Boot Camp partition or any other. I select Drive options (advanced) and Format the Boot Camp drive, but it makes no difference.
This is the Windows error:
Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks.
Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer BIOS menu.
I am not sure what Csound1 is suggesting with that post above. There are some involved suggestions over here <https://discussions.apple.com/message/23548999#23548999> about using Disk Utility to delete the Boot Camp partition and create new ones - is that the idea?

Windows 8.1 clean install in GPT hard drive style without loosing the RECOVERY partition

Similar Messages

Maybe you are looking for