Clean install of OXS - hard drive + extra internal

I'm getting ready to do a clean install on my harddrive but I'm wondering how (if at all) it will impact my 2nd internal drive...? Hopefully not at all...?? Please help!
Thanks
Carrie

Shouldn't have any impact since your 2nd internal drive is a separate drive.

Similar Messages

How to properly clean install: erase, partition hard drive, and install tiger then SL

Hello,
     I am a noob at this, so if responders would be kind enough to be detailed / specific with any instructions it would be most helpful! I own a dinosaur apparently (even though I don't think so): the white (not unibody) Intel macbook2,1 (late 2006) 1.83 GHz with currently 1GB of RAM, but I have 2x2GB RAM sitting next to me ready for install. However, first I would like to do a clean uninstall of my computer (running OS X 10.6.8 SL). I also would like to properly partition my hard drive while I'm at it.
     About 6 months ago I had serious crashing issues, along with kernel panics, hangs, applications randomly appearing & disappearing, system settings and options doing the same, fans running high (probably due to the low RAM available), and basically overall screwiness. So, after trying pretty much every option I could find on this community...and many others... (e.g. clean cache, clean old logs, already did a clean uninstall and install of SL, and much much more) I have reached my wits end. I would say that to date I've wasted a good solid 2 months with this.
     The clean install worked for MAYBE a month or so, but then it started acting up again with the fans (even without high pages in/out, CPU or memory usage) and excessive heat, along with the apps freezing and quitting (mind you it would be only two things open such as 1 word document and then firefox-- with flash disabeled). SOOOOOO long story short, I have purchased new RAM and I would like to try this once again, but to ensure I don't screw it up this time I would like some directions as to how to do the uninstall, partition, then reinstall. (currently to date I ensured all updates are completed---even though they are no longer released for SL, and I just did a full backup).
     Also, I need to first install Tiger (my original OS) as when I went to do a hardware test the other day this was not an option (and upon further research it is due to me not using Tiger as a first install and then using my mac box set for SL). I didn't use my original OS first because....one issue encountered when I had tried to install Tiger was that my Disc 2 (the applications one) took around 1.5 hrs to complete, but when I reached the last step of glory where I expected it to say COMPLETE it instead said that there was some sort of issue with the disc..........of course).
     Any help would be greatly appreciated.

1: If near a Apple Store or Authorized Repair, take it to then for a free evaluation, it might have other hardware problems now that it would be a waste of effort even continuing.
2: The RAM needs to be
Maximum Memory
3.0 GB (Actual) 2.0 GB (Apple)
Memory Slots
2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM
Basically what this means is you can put in a 2GB module and a 1GB module for 3GB total.
I wouldn't proceed with installing RAM just yet, not until you get a stable OS X version on the machine, you might have a hard drive needing to be replaced as well which you can do while inserting new RAM.
3: This User Tip can assist in installing 10.6 Snow Leopard, partition format etc.
How to erase and install Snow Leopard 10.6
Software Update fully immediately after setup.
There is no need to install Tiger, he 10.6 disk contains the full 10.6 version, you can either install the iLife from Tiger disks or use Pacifist from Charlesoft to extract them and place on your new install, then Software update to get them current.
4: If not successful then the drive also likely needs to be replaced, if so choose a 7,200 RPM SATA I w/1.5Gb/s connection.
Install/upgrade RAM or storage drive in Mac's
Repeat #3
If your getting beeping noises or "you need to restart" issues, it's likely one or more of the RAM modules is bad. Have it exchanged or swapped.
I advise good quality RAM the first time, if you buy cheap stuff it's just going back.
Don't go any further than 10.6.8 with that old machine, the performance will be terrible.

Erased Hard Drive for Clean Install of Leopard, Hard drive is gone!

I put in my Leopard Install disk to do a clean install of everything as I was going to give this iMac to someone. I erased the hard drive and then started the Leopard install. It stopped half way through and that was that! Now the hard drive does not appear as my Macintosh HD anymore. When I open disc utility, it lists it as just a 150MB hard drive; no name, no volume. If I try to format it again, it says "resource busy". If I try to install Leopard, it just keeps looking for a drive to install it in. Bummer. Any ideas how I can get my hard drive to be recognized again? It is an iMac G5, 5 years old with no other problems before this. Thanks.

Try shutting down (powering off). Then start it up again using your Mac OS X installation disc, and run Disk Utility as you did before. This time, try going to the Partition tab (instead of using the Erase tab). Reset the +Volume Scheme+ to *1 Partition*, even if it already has only one partition. Click the Options button, and make sure it is set for *Apple Partition Map*. Name the volume +Macintosh HD+, set the Format to +Mac OS Extended (Journaled)+, and Apply.
See if that works any better.

Windows 8.1 clean install in GPT hard drive style without loosing the RECOVERY partition

Always i try format my windows partition, i get the following error:
Windows cannot be installed to this disk. The selected disk is of the GPT partition style.
So i would like a clean install Windows 8.1 without chnage the hard drive style or loose my RECOVERY partition.
Obs.: I just can perform boot after disabling UEFI and Secure Boot.
This question was solved.
View Solution.

@lucasc ,
Hello and thank you for posting on the HP support forums. You will not be able to do this without damaging the recovery partition. If you want to do a fresh install on your system use the system recovery.
If not you will install the operating system of your choice. Before doing so make sure the notebook came with the operating system and you have supported drivers for the OS you want to install.
If not you may not be able to find supported drivers and end up with hardware issues. The drivers are built for the notebook based on the OS that it was released with and they are proprietary.
I hope this helps. Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Clean install on ext hard drive

I have a new 21" iMac arriving and plan on using external drives rather than the internal one. It's my first time installing OS X from the App Store to a new hard drive so I want to make sure I have the procedure correct.
From what I've read I can boot from the recovery partition by using CMD-R at start up and then set up WiFi and procede with the download to my new drive. Is that correct? I also want to make sure the boot partition is untouched. This will make it easier for me on resale because I won't have to copy my data over or do a reinstall of the OS. Installing via Recover will achieve these goals, Yes?
Thanks in advance. "Solved" credit will be given to first correct response.

Thanks for the confirmation.
I can't see how a desktop WD Black on USB 3 is going to be any slower than Apple's OEM internal 5200RPM laptop drive in the iMac. I like the greater flexibility, esp. in case of HD failure. If I use the iMac's int. drive and it fails I'm computer-less for days if not a full week, not to mention the time to schlep it to and back from the store. Also, as noted, if I keep the int. drive new then that is time saved when I go to sell.

BSOD experience with CLEAN INSTALL on new hard drive...next step?

Much has been written about the BSOD experiences of those upgrading to Leopard and the conflict with third party software enhancements already on their Tiger system. And apparently those fixes are working for some. I may be in the minority, but I own a Mac Pro and have a boot drive for Tiger and a second boot drive, brand new and zeroed out, on which I installed Leopard.
When I go to start Leopard, I get either the BSOD or it will go one step further, bring me to the Leopard desktop, then hang...with a movable mouse but no functionality. In my case, since I am doing a fresh install with no Tiger software on the new hard drive, what could be causing the conflict? Has anyone else out there experienced my specific problem? And have their been any suggestions posted on a fix for this situation.
Obviously the CLEAN INSTALL experience of Leopard is not immune from the installation BSOD problems of the TIGER UPGRADERS.
I would love to hear from others experiencing these BSOD issues with their CLEAN INSTALLS and any possible workarounds.
Many thanks,
John

I think the issue is installing 10.5 on a different drive than the boot drive. I would recommend swapping the drives, making the 10.5 the physical boot drive and Tiger the secondary.
I have done two clean installs on two different machines with no issue. A 3rd machine was upgraded with no issues as well.
Asking other users for sob stories helps no one. Asking for resolution however, is key.

Trying to clean install Mavericks but hard drive partitioned and won't allow

My MacBook Pro 2012 was set up with a partitioned hard drive. Now, as I upgrade from 10.8 to Mavericks, I'd like ot use the Disk Utility to erase the hard drive and then use the interface to install Mavericks, but it won't let me erase the hard drive.
On the left side of the Disk Utility, below the main hard drive, there are two drives noted, with the OS and something else.
Can you suggest how to do something here? I'm stuck halfway.

I'm not sure what you are doing, but if the Recovery HD is still there:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
           because it is three times faster than wireless.

Trouble installing itunes: install to ext. hard drive not C

I can not install itunes as it tries to install to external hard drive not internal drive C. I have followed recommendations in troubleshooting on website but no avail. Any suggestions?

Thanks for reply. I have cleaned everything itunes off system. Have run windows install clean up but no itunes there. Still gives me error message that drive k is invalid. Drive k is my external hard drive which I have disconnected. I want it to install on c drive.

I want to install a new hard drive on my 2008 MacBook but do not have the instillation discs that came with my computer. Can I use instillation discs from a 2009 or 2010 MacBook?

I want to install a new hard drive on my 2008 MacBook but do not have the instillation discs that came with my computer. Can I use instillation discs from a 2009 or 2010 MacBook? The hard drive I am planning to install is a WD Scorpio Black 500GB SATA 2.5'' internal hard drive.

Sometimes they do work - i've done it before. I have a late 2008 Macbook Uni and used the install dvd of my 2009 Macbook White and it worked.
Why not just clone your hard drive? It'll save you a lot of time doing a clone rather than doing a clean install.
Unless you're having issues with your old set up or your old hard drive is dead.
You can download Carbon Copy Cloner - install your new hard drive in a external usb enclosure (around $10) and clone fromt here then test it before you install it in your Macbook.
Once you've done the swap, you can install your old hard drive in the USB enclosure and use it as a backup drive.
Good luck

Installing a second hard drive in a G4 - advice needed please

Hi......
I have a G4 Quicksilver (2002) model and I also have a G4 Digital Audio model as well which is currently surplus to requirements.....
I would like to take out the 20Gb hard drive from the older G4 and put it into the Quicksilver as a second internal hard drive (for extra storage capacity....)
I have seen the instructions regarding installing a second hard drive and it doesn't seem to complicated....
I just want to check because the 20Gb hard drive has the operating system on it for the older G4.....
Do I have to fire up the machine and erase the hard drive and then take it out and put it into the Quicksilver...?
Or am I able to simply take it out, put it in the Quicksilver and erase it when I restart the machine....?
I don't have the original installation discs for the OSX...
I talked to a Mac technician at work and he said I can just take out the 20Gb hard drive and put it in as a 'slave' drive and I have to 'bend some pins' (I think he said) when I install it.........and I can then erase the second hard drive and use it as storage.....
any advice would be greatly appreciated.....
Thanks

Hi, craigkelleigh -
Ony many drives the label showing jumper pins configurations will be on the end of the drive, just above the block of pins; on other drives it may be on the top, rarely on the bottom.
The block of jumper pins is at the same end of the drive where the data cable (wide, flat ribbon cable) and the power connector plug in.
It is best to move the jumpers before installing the hard drive - they're quite small and hard to manipulate in a confined space. Important - do not move jumper pins if the drive is powered up (running).
As far as removing and installing the drive, you can view/download a how-to PDF or movieclip from these pages -
G4 (Digital Audio) - http://docs.info.apple.com/article.html?artnum=75313
G4 Quicksilver - http://docs.info.apple.com/article.html?artnum=75314
In addition, with regard to specific jumper positions, that depends on the make (and sometimes the model) of the drive. There are some resources available on-line, such as jumper diagrams for specific drives. If you would give us the specific make (manufacturer) and model number of your hard drive (that info should be shown on labels affixed to the drive), we may be able to direct you to a specific website page with that info.

Pavilon 500-319na can I install a second hard drive

pavilon 500-319na second hard drive
Options
‎01-02-2015 09:30 AM
Operating System: Windows 8.1
I bought an HP Pavilion 500 - 319na desktop in summer and want to install a 2nd hard drive. There are spare connections on the board and the power cable to the internal hard drive has a spare connection. From what I read it needs to be SATA 3. I have read conflicting advice on this board. Some say yes, some say no.
OK, there seems to be only one bay (a poor oversight by HP) but provided I find a way of securing another drive is there any reason why it should not work.
From what I read it should be max 2Tb's.
I want a definitive answer please!
Win 8.1 64 bit.
This is the hard drive I plan to buy. The spec says XP, Vista, Win 7, but am I right in thinking it should work with win 8.1
http://www.pcworld.co.uk/gbuk/components-upgrades/internal-hard-drives/3-5-inch-hard-drives/toshiba-...
This question was solved.
View Solution.

As I said to you in the other cross posting (desktop hardware):
You can obtain 3.5" hard drive cage from here for $11 shipped. Granted it has a 120mm fan and space for 4 drives, but for the price, you can mod/cut all you want.
Now your other issue/question: You will want a SataIII 6GB/sec drive 2TB, 7200 RPM.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Where can I buy a larger hard drive for my late 2008, 15" macbook pro? From reviewing questions and answers on the support community it would appear that having Apple remove the old and install the new hard drive is recommended. But how/where?

Where can I buy a larger hard drive for my late 2008, 15" macbook pro? From reviewing questions and answers on the support community it would appear that having Apple remove the old and install the new hard drive is recommended. But how/where?

Welcome to Apple Support Communities
You can install the new hard disk yourself if you want to. You just need a 2'5" SATA II hard drive, which is compatible with your MacBook Pro. You can buy one at OWC > http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/ You can filter hard drives by computer, so press a "Click to view all...", choose your computer in the sidebar and it will give you the compatible hard drives.
There are different brands for the MacBook Pro. The most recommended are HGST and Seagate, which have good reputation. A 7200 rpm hard drive will give you extra performance

I tried to install a new hard drive using Snow Leopard to back up with Time Machine. When I installed the new HD I installed Leopard (10.5) on it and tried to use time machine to restore the backup I had made using 10.6. Kernel panic screen occurred.

I backed up my system using 10.6 Snow Leopard's Time Machine to an external hard drive. I did this because I purchased a new internal hard drive to upgrade my 2007 White Macbook from 80GB to 320GB. When I installed the new hard drive, I installed 10.4 (Tiger) and then 10.5 (Leopard) and once Leopard was in I tried to use Time Machine to restore my backup from 10.6 (Snow Leopard) and received a kernal panic screen directly after the bootup.
The screen had code asking for 10.6, so does this mean that the computer is searching for Snow Leopard? If so, how can I do this? Will a bootable drive with Snow Leopard on it be able to solve the issue or will I somehow need to find a way to wipe out this new hard drive?
-Steve

Booting From Snow Leopard Installer Disc
1. Insert Snow Leopard Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple logo appears.
5. Wait for installer to finish loading.
Drive Preparation and Installation
1. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. After formatting is complete quit DU and return to the installer. Install Snow Leopard.

HT201250 My macbook pro crashed and I had to install a new hard drive. I restored from Time Machine backup all the files from my old hard drive onto my new one.

Does it really back up the whole new drive or does it only back up what's been added? It seemed like it was doing the whole thing when I tried it. I stopped it. Don't want to use up all the space on my external. Is there something else I need to do or did I mess up by not doing the migrating thing? thanks!

If you installed a new hard drive, it has nothing on it and yes TimeMachine is going to take forever to restore everything back.
I guess you'll have to erase and start over again now.
Too bad, you should have made bootable clones in addition to TimeMachine, they can restore in a hour or two depending upon content, they are also option key bootable.
TimeMachine has to go through and calculate all the files it needs to bring forward, the files are strewn all over the drive. The read heads are moving all over the platters all the time from fast sectors to slow ones, not matching what's occuring on the internal drive.
With a clone the files are defragmented and optimized, the drive reads one file, moves the heads a tiny bit and reads the next all the while transferring exactly to the internal drive, they are more in step with one another, thus it's much faster restoring from a clone than TM.
Most commonly used backup methods

How do i install an external hard drive to my powerbook G4?

how do i install an external hard drive to my powerbook G4?

Buy an external FireWire drive (and FireWire cable if you don't have a spare or the drive doesn't come with one). Then, just plug it in. Not much for installing.
If you mean replacing your internal drive, that's another matter entirely.

Clean install of OXS - hard drive + extra internal

Similar Messages

Maybe you are looking for