Windows 8.1 Standard with Microsoft Account does not work with WSE 2012

I have a WSE 2012 machine with 3 users & 3 devices setup.
My Windows 8 (Standard) Laptop with Local User connects fine.
My Windows 8.1 (Standard) Nettop with Local User connects fine.
But my Windows 8.1 (Standard) Laptop with a Microsoft Account does not automatically login to the Server. It worked fine when it was running Windows 8 with a Local User but unfortunately in 8.1, MS decided to force a Microsoft Account login on us if I want
to continue to use Sky Drive! That would be fine, but now it wont login to their own server product...
I've tried adding a Windows Credential (set at Enterprise level) to the Credentials manager but it just gets forgotten on reboot.
If I log into the LaunchPad (which creates a temporary credential) then it works fine HOWEVER the "remember me" tick box is being ignored and the next time I restart the PC the LaunchPad is signed out again!
I've re-installed the connector.
I've removed the PC from WSE, un-installed the connector and then re-joined. (Done this twice, once as a local user and then converted to MS Account, and once as an MS Account.)
Basically, I just don't think WSE2012 with non-Pro versions of 8.1 on a MS Account have been tested and MS need to either fix it or document it. If someone could just get the LaunchPad to remember my local login and automatically start on next reboot then
it wouldn't be a problem. OR stop launch pad from deleting the manual credentials I added everytime I reboot. At the moment it's the worst of both worlds.
Any ideas?

Hi Susan,
Thanks very much for replying, but if you re-read my post you'll see that I already know how to do that and also that I don't want to change back to a local account because I need Skydrive access.
Essentially as it stands, I can use Windows 8.1 with WSE but lose SkyDrive (and any other MS Account benefits) or I can use an MS Account with Windows 8.1 but lose permanent access to my server shares and client backups...
Reading around it seems that it's perfectly possible to have an MS Account and then do one of the following:
Use a Windows Credential stored for the local user to give access to the Server.
Set the LaunchPad to automatically log in at start-up.
If on a Domain, go into settings and Link the MS Account to your Domain Account.
Unfortunately none of these options are working for me (3 isn't even possible with 8.1 Std).

Similar Messages

My camera works with the photobooth and with skype but does not work with online applications such as "lolcam from facebook" or "faceonthehole" application. Please help

My camera works with the photobooth and with skype but does not work with other applications like the "lolcam" from facebook or the " faceonthe hole" application. Can anyone help?

There was a issue with school computers being used to spy on kids in their bedrooms, Mac's were involved.
So Apple most likely tightened the API's to only select, trustworthy companies as not to abuse the web cam access priviledge.
If you want to use a web cam with these other programs and services, you'll likely have to buy a third party USB one, so you can manually disconnect it.
There isn't a way to physcially disconnect the built in web cam on Mac's without busting open the machine.

TS2634 After I updated my iPod touch with iOS6, it does not work with my Logitech docking station. Is this a problem with iOS6?

Does updating the 4th generation iPod touch with iOS6 keep it from working with a Logitech docking station/boombox? Nothing is wrong with the boombox.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
iOS: How to back up your data and set up as a new device
If it still does not work that means that the update broke compatibility. That happens sometimes. You will have to wait for an update to either iPod's iOS or the dock's firmware.

E.mail alias with mac account does not work...

I created an alias on my mac account. I made a new account in mail app, but am not sure what username it needs. Does it need the original username of the account holder or the part that is before the at in the alias email address?
It keeps asking for my password when checking mail, I know the password is correct as it should be the same mac account password as always right?
I need the second address for business, and it is pretty urgent. Can someone enlighten me? I tried to look it up in the help, but I don't see anything.
I can send mail from the alias, but can't check mail...

You cannot access a .Mac account alias as a separate account in Mail.
The following was copied from Mail Help:
If you have a .Mac account, you can send and receive email using .Mac email aliases. An email alias is an alternate email address for your .Mac account.
To send a message from a .Mac email alias:
Choose File > New Message to open a compose message window.
Click the Account pop-up menu and choose the email alias.
When you send the message, it will appear to come from your email alias.
Messages addressed to your .Mac email alias will arrive in your .Mac account inbox.
To set up a .Mac email alias, choose Mail > Preferences and click Accounts. Select your .Mac account and click Account Information. Click Edit Email Aliases to go to the .Mac website. Log into your account. Click Accounts and then, in the Email Aliases section, click Create Alias (if none exist yet) or click the Add button (if at least one exists already). Enter a name for the alias and click Create Alias. The alias will then be available in the Account pop-up menu in new message windows.
If the Account pop-up menu doesn't appear in the compose message window, click the Action menu in the lower-left corner of the message header and choose Customize. Select the checkbox next to Account and click OK.

.click on row works with php table - does not work with javascript table.

Howdy,
I've run into a very interesting problem today, and I hope you'll be able to help me.
I have a page in which the top is php to read a table from the server, and post the table as the html page is being built.
The data come up as a table, and each row is clickable, that click moving the user to a different page, based on the row clicked.
Here are the relevant parts of the php code:
<?php
echo "<table id='patienttable' cellpadding=5px border=0 font-size=16px>";
echo "<tr><th width='30'>"."ID#"."</th><th width='100'>"."Last Name"."</th><th width='100'>"."First Name"."</th><th width='100'>".
"Middle Name"."</th><th width='80'>"."DOB"."</th><th width='50'>"."Zip"."</th><th width='50'>"."Gender"."</th><th width='100'>".
"Phone"."</th></tr>";
while ($row = mysqli_fetch_array($result))
blah blah blah
echo "<tr><td id='localid'>".$localid. "</td><td>".$lastname. "</td><td>".$firstname. "</td><td>".$middlename."</td><td>".$dob."</td><td>".$physzip. "</td><td>".$gender."</td><td>".$phone1.       "</td></tr>";
echo "</table>";
?>
And here is the code to click on a row:
$("#patienttable tr").click(function() {
       var passthis = $(this).find("#localid").html();
       $.post("php/setsessionvariable.php",
              {sessionval: passthis},
     function(e) {window.location.href = "root.php"}
EVERYTHING works great - no problems - working now for about 2 months.
Today I started to build something similar, BUT! I cannot read from the database at the top of the page, I must do an ajax query, call the db, and post the data in a table;
Here is the boring, fairly straight-forward javascript code:
$.ajax({
    type: "POST",
    url: "findpatientbackend.php",
    data: {letterslastname: lastname},
    dataType : 'json',
    success: function(result) {
$("#div1").html("");
        if(result.length >= 1)
   {var output = "";
         $("div1").html("<table id='findtable'>");
          $.each(result, function(index, value) {
                                                 output += "<tr><td width='100px'></td><td id='localid' width='100px'>"
             + value.localid + "</td><td width='100px'>"
             + value.lastname + "</td><td width='100px'>"
             + value.firstname + "</td><td width='100px'>"
             + value.middlename + "</td><td width='100px'>"
             + value.dob + "</td></tr>";
            $("#div1").html(output);
         $("div1").html("</table>");
    error : function() { alert("error on return"); }
And here is the click row code, almost EXACTLY like the one above:
$("#findtable tr").click(function() {
       var passthis = $(this).find("#localid").html();
       $.post("php/setsessionvariable.php",
              {sessionval: passthis},
     function(e) {window.location.href = '../root.php'}
All the "stuff" loaded onto the page just fine, BUT, absolutely nothing happens when I click a row.
Playing around this afternoon, I did a "View Source" on both pages, and saw something VERY interesting;
1 - The table written by PHP is present, can be seen, and therefore is "clickable" to the jquery .click function.
2 - The table written by javascript is INVISIBLE! I cannot see it in the source view (but I can see it on the screen) and therefore the .click function can't see it either.
Questions:
1. How can I make the table written in javascript "clickable" - how can I make the javascript table "visible"?
2. Could it be the use of ".html" to post the table to the div? Is there another way?
And again, I thank you in advance for any help.

I found the solution to my problem, and perhaps my comments here will help others.
Thinking a bit more, I wrote a separate javascript routine that created a table, allowed it to be styled, and allowed it to be clickable.
Here is the code:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html>
<head>
<script src="http://ajax.googleapis.com/ajax/libs/jquery/1.4.2/jquery.min.js" type="text/javascript"></script>
<script src="http://ajax.googleapis.com/ajax/libs/jqueryui/1.8.1/jquery-ui.min.js" type="text/javascript"></script>
<style>
#findtable {
width:200px;
background-color:#CFD3FE;
margin:10px auto;
text-align:center;}
</style>
<body>
<div id="puttablehere"></div>
<script>
$(document).ready(function () {
var output = "<table id='findtable'>";
for (var i = 0; i<15; i++) {output += "<tr><td width='100px'>X</td><td id='localid' width='100px'>X</td></tr>";}
output += "</table>";
$("#puttablehere").html(output);
$("#findtable tr").click(function(e) { alert("it works!"); });
</script>
</body>
</html>
The initial code I posted was creating the table the wrong way.
You have to create the WHOLE table at the same time, and post it all at once.
The code above does that.
My learning points are:
1. To create a table in javascript, and post it with a $("#puttablehere").html(output); call, you must put the ENTIRE table into that single string variable called "output" (or whatever you want to call it).
2. Everytime you call a jqeury .html function like this: ---("#puttablehere").html(output); -- It COMPLETELY over-writes the whole div/tr/td block that it is pointed at.
3. If you create a table in javascript (client side) you cannot see it with "View Source" - because what is posted in the table is AFTER the DOM is loaded.
Creating a table with php server side - you CAN see, because it is posted with the DOM.
So I thank you for your ideas, and I hope this may help another noob, such as myself, in the future.
Adios!

Hotmail has an EMOTIONS tab which works fine with IE but does not work with Firefox. Is there a fix?

I cannot use the emotions tab in the latest Hotmail. Nothing appears. It works fine with IE. Is there a fix?

Works fine here on Linux. Make sure that you do not block [[JavaScript]].
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

HT1338 preview does not work with mountain lion

I updated my mid 2011 mac mini to mountian lion and i find Preview and all of MS Office 2011 for MAC fails to work
I can cut and paset the logs, but lets astart with assessing whagt does not work with Mountain Lion.

Your profile lists a 2008 MacBook with Snow Leopard.
I installed Windows XP into Bootcamp on my 2009 MacBook Pro (either in Leopard or Snow Leopard, I do not remember which) and I used it with Parallels 6.
When I upgraded it to Lion, even though the Lion Bootcamp will NOT install Windows XP, my Bootcamp (and use by Parallels 7) survived the upgrade.
It may be possible that it will also survive and operate a future upgrade to Mountain Lion.

ACROBAT XI - DOES NOT WORK WITH WINDOWS VISTA

WHY DOESN'T THE COMPANY STATE ACROBAT XI PRO DOES NOT WORK WITH WINDOWS VISTA.
THE COMPANY NEEDS TO WARN PEOPLE. THE ACROBAT TECH SUPPORT FINALLY FIGURED OUT THAT IT'S NOT COMPATIBLE WITH WINDOWS VISTA.

The Acrobat website and the box lists the compatible OSs. You want Adobe to list all of the incompatible OSs---going back how far.
Acrobat XI Pro system requirements
These system requirements are for Adobe® Acrobat® XI Pro software, v11.0. Because system requirements change with each software update, refer to the Release Notes for your software version for the latest information on supported operating systems and browsers.
Windows
1.3GHz or faster processor
Microsoft® Windows® XP with Service Pack 3 for 32 bit or Service Pack 2 for 64 bit; Windows Server® 2003 R2 (32 bit and 64 bit); Windows Server 2008 or 2008 R2 (32 bit and 64 bit); Windows 7 (32 bit and 64 bit); or Windows 8 (32 bit and 64 bit)
512MB of RAM (1GB recommended)
1.85GB of available hard-disk space
1024x768 screen resolution
DVD-ROM drive
Internet Explorer 7, 8, 9, or 10; Firefox Extended Support Release; or Chrome
Video hardware acceleration (optional)
Note: For 64-bit versions of Windows Server 2003 R2 and Windows XP (with Service Pack 2), Microsoft Update KB930627 is required.

Microsof VX 3000 or 6000 Webcam does not work with Lync 2013 under Windows 8.1

Hi,
The problem is that i cannot use the Microsoft VX-3000 or VX-6000 with Lync 2013 under Windows 8.1.
If i go in settings under Video i can see the preview from the webcam just fine, so it works there no problem.
Wenn i try to enable my camera in a conference it does not work, i get an error: Your video cannot be started.
Now, there are no Windows 8.1 drivers for the Webcam so i installed the latest Windows 7 drivers. Because of that this webcam does not work with apps, that is fine i understand the driver problem and the way the new apps work.
But this Webcam works with skype under Windows 8.1 and it works with Lync 2010 client.
The same Webcam works just fine with Lync 2013 under Windows 7.
Is there anything i could do so that i get this Webcam to work with Lync 2013 desktop client under Windows 8.1?
Thanks

Hi,
According to your description, it may be caused by driver.
You can try to install the latest version of Display Driver to fix the display issue.
Since there is no driver for Windows 8.1, I suggest you wait for updating.
You can also post a case on Windows 8 forum, thank you for your understanding:
http://social.technet.microsoft.com/Forums/en-US/home?forum=W8ITProPreRel%2Cw81previtpro&filter=alltypes&sort=lastpostdesc
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Window 10 build 10041 does not work with Intel 82579V Gigabit Ethernet on ASUS motherboard

I originally posted this question here:
answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_update/window-10-build-10041-does-not-work-with-intel/6729892f-83aa-4822-b20a-ea84f4fd06c7
and was asked to post it on this forum...
I updated a computer I have which is a quad core i7 that I built and includes an ASUS motherboard with Intel 82579V Gigabit Ethernet built in. Windows 10 preview 9926 worked fine with this network adapter. Window 10 build 10041 does not, and I have tried
it twice so far. I even went as far as buying a Thunderbolt-Gigabit Ethernet Adapter (Broadcom, sold by Apple)... and while it installed the driver automatically, it did not work either. Each time you try to view the properties of either of them, it locks
up or give an error. In fact, doing much of anything with the Intel adapter icon assures you of not being able to do a clean reboot... have to kill power. I have finally gone back the previous version 9926, which has its issues but no where near as bad
as not having any network connectivity! Does anyone have this issue and a workaround?
Note, there are two images on the windows 10 preview forum that I posted this question on. I could not post the full link as I was getting a message here that links and graphics are not allowed.

Thanks Roger, I posted the following yesterday in the other thread (thinking it was this thread - confusing after they moved it here)... It may be that the new driver fixes the issue that 10041 has with it, but I have not tried that yet. If I do I will update
this... Thanks!
I have more information about this, which basically exonerates any issue with the Intel 82579V Gigabit Ethernet hardware or software. I have 3 computers with Windows 10 preview so I have multiple angles to see issues from. With this I have found a culprit
(but I suspect not just the only culprit) in this above mentioned problem...
10041 build combined with installing (or attempting to install) CISCO VPN Windows 7 64bit 5.0.07.0440-k9 client causes the issue mentioned above. I confirmed this on a completely different machine with a totally different Ethernet adapter. First machine
is an ASUS motherboard in a tower system I built, with the Intel 82579V Gigabit Ethernet hardware built in. Second machine is a Gateway Laptop from 2008 which has a Marvell Yukon 88E8057 PCI-E Gigabit adapter built in. Build 10041 will work fine with my 2008
laptop, including the MS VPN client (which I have tested). However, if you attempt to install or even uninstall the Cisco client you will have to do a recovery to a restore point (as I have done twice) in order to get your network working again. Installing
or attempting to install (because it never even does install properly and times out), CISCO VPN client will render your entire network unusable. Going back to a restore point saved me and I am still running 10041 but I can't use CISCO VPN client any longer.
I could with build 9926, including on all 3 machines. I now have 9926 on two machines and 10041 on only the 2008 laptop.
Hopefully this above information helps someone resolve the issue. I will also mention, even though my network is working on the 2008 laptop, I still can't go into the Control Panel\Network and Internet\Network Connections and right mouse click on the Marvell
Yukon 88E8057 PCI-E Gigabit adapter icon. I get an error when clicking on Properties menu popup : "An unexpected error has occurred". So something is still up with my network adapter driver or windows software, but it could be a side effect of all
that has happened with the Cisco software install attempts under 10041.
Another note: CISCO Anyconnect also has the issue.

ITunes 12.1.1 does NOT work with Windows - Fix??

Hi everyone,
I had issue after issue with the latest iTunes update (12.1.1) not working on my windows 7. It simply would not lunch when clicking on the shortcut to open.
After a fair bit of searching I found this alternative version which seemed to do the trick and now it works:
iTunes 12.1.1.4 for Windows (64-bit - for older video cards) - iTunes64Setup.exe(2015-02-18)

The "for older video cards" installer - which, like most prior "64 bit" versions of iTunes, is actually a 32 bit application with a 64 bit installer - may be a useful fallback if the full 64 bit version does not install or run correctly. Although 12.1.1.4 is a major improvement over 12.1.0.71, there are clearly still some lurking incompatibilities with some 64 bit Windows systems/components. It is, however, a little misleading to say that "iTunes 12.1.1 does NOT work with Windows" - in many cases it works fine without switching to the alternative version. I have the full 64-bit version of 12.1.1.4 running on three systems - two Windows 7 and one Windows 8.1 - no issues with either installation or operation on any of them.

My icloud account does not sync with my iphone 4s. My contacts do not show up on icloud and I do have "contacts" turned on to backup

My icloud account does not sync with my iphone 4S. My contacts do not turn up on icloud and I do have "contacts" turned on in my phone.

Unchecking them won't help, it will only hide them from view. The issue you're running into is that iCloud doesn't sync contacts from non-iCloud accounts like your exchange and Yahoo accounts. In order to sync these with iCloud, you would need to copy them to the iCloud account and then disable contact syncing with these other accounts. (If you didn't disable contacts syncing with these accounts, you would see duplicates of these contacts on your phone -- one from the external account, and one from iCloud.) If you want to do this, do the following:
Go to Settings>iCloud, turn Contacts to Off, choose Delete from My iPhone when prompted (any iCloud contacts will still be in iCloud).
Download the app My Contacts Backup. (If you have more than 500 contacts to transfer from your other accounts you will need the “Pro” version.) Use the app to back up the remaining contacts on your phone (from the other accounts) as a vCard attachment to an email that you send to yourself. Confirm that you have received the email before proceeding to step 3.
Go to Settings>iCloud and turn Contacts back to On.
Go to Settings>Mail,Contacts,Calendars>Default Account (in the Contacts section), and confirm that this is set to iCloud.
Go to Settings>Mail,Contacts,Calendars…tap your Yahoo and your exchange account and turn off contacts syncing with these accounts. This will remove the contacts from these accounts from your phone.
Open the My Contacts Backup email and tap the attachment to import the contacts from these accounts back to your phone, and to iCloud. All your contacts should now be in iCloud and be visible on icloud.com.

TS3276 My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that o2 account (offline) my mac I have no problem with my iPhone or mac laptop. any suggestions please.

My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that o2 account (offline) my mac I have no problem with my iPhone or mac laptop. any suggestions please.

Sorry for the delay...
I did what you've told me, new account and manually copied my files from Time Machine. I had lots of permissions problems, but at the end, almost everything is in order... It seems it had to be with some of the Apple Preferences, but I can't be sure, as most of them were dumped to the trash can.
I still don't have my Mail Rules back, unfortunately, although I did goggled some. It is a pity, as I had around 30 or 40 of them, getting my mail in order to each of its mailboxes, but it is a small price as the rest doesn't show the before syntoms.
Thanks for the help, anyway!!

Better privecy does not work with windows vista home prem. what other program removes LSO'S AND HOW can I stop trackers?

Question
better privacy does not work with windows vista home prem. what other program removes LSO'S AND HOW can I stop trackers? edit
Details

As a temporary workaround, I believe this Adobe management page allows you to clear your "Flash cookies": [http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html Adobe - Flash Player : Settings Manager - Website Storage Settings panel] (hosted on macromedia.com -- Macromedia was the original developer of Flash).
Regarding the script error, if I'm reading the script correctly, it is related to accessing your Flash cookies directory. It seems the publisher's support forum is not currently available for searching, but that might be a good next step.
In the meantime, could you check whether the script has the correct location for your Flash cookies directory? If you can't access Tool > BetterPrivacy, you could check here:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''bpr''' and pause while the list is filtered
(3) There should be a bolded setting named '''extensions.bprivacy.DataDir''' which looks approximately like the following:
C:\Users\''yourWindowsUsername''\AppData\Roaming\Macromedia
Do you have a similar value? If you paste the path used by BetterPrivacy into a Windows Explorer window, does it open? Also, click a couple levels in the folder, can you see:
Flash Player \ #SharedObjects
If the value is wrong, right-click the wrong value and choose Reset. BetterPrivacy should update the value the next time you try to access it.
If the value is blank, you could try inserting a sensible value and see whether that helps.
Any luck?

I generated a new Itunes Account and now the App sync. does not work with theapps I bought with the old account. Is it possible to merge the old and the new account ?

I generated a new Itunes Account and now the App sync. does not work with the apps I bought with the old account. Is it possible to merge the old and the new account ?

It is not possible to merge Apple IDs.
Why did you create a new one?

Windows 8.1 Standard with Microsoft Account does not work with WSE 2012

Similar Messages

Maybe you are looking for