Windows 8 crashes and with the error "kernel_security_check_failure" after installing Boot Camp drivers.

Hi!
I've got a new 27" iMac (late 2013), and I was going to install Windows 8.1 (64-bit) to be able to play a few games.
Everything went smoothly (installed normally via Boot Camp Assistant), and after the Windows setup, the Boot Camp drivers needed to be installed. After this, the computer rebooted, but crashed at a blue screen with the error called "kernel_security_check_failure".
It rebooted a few times on its own, but after a few times, I got some options, and I chose to "refresh" the Windows 8 install, meaning it would reset the install while keeping my files (even though I didn't have any, as I never got to use it). This took some time, but it worked, and it booted into W8.
The Boot Camp drivers had been removed though, so I had to reinstall them. After they had reinstalled, the computer rebooted and the same blue screen with the same error hit me.
Something tells me that some of the BC drivers are messing things up. I can't find any information on this elsewhere.
Would it be possible to install only selected drivers, to eventually find out which driver is causing the problem?
All help is greatly appreciated!

I finally gave up, reloaded everything, this time, using WIn 8.1 Pro, not Enterprise. After I did the updates, patches, Norton 360, shut computer down and connected the external drives, and booted up...and got the BSOD. This time, I went to Microsoft and downloaded the Windows Debugger, and think I may have found the problem...NORTON!
Probably caused by : SYMDS64.SYS ( SYMDS64+71be6 )
Am conrtacting them, but, here's the Debugger output:
Microsoft (R) Windows Debugger Version 6.3.9600.17029 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Dump\MEMORY.DMP]
Kernel Bitmap Dump File: Only kernel address space is available
************* Symbol Path validation summary **************
Response                         Time (ms)     Location
Deferred                                       SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9600.17085.amd64fre.winblue_gdr.140330-1035
Machine Name:
Kernel base = 0xfffff802`0f87e000 PsLoadedModuleList = 0xfffff802`0fb482d0
Debug session time: Tue Jun 17 00:48:52.131 2014 (UTC - 6:00)
System Uptime: 0 days 0:03:09.864
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
*                        Bugcheck Analysis                                    *
Use !analyze -v to get detailed debugging information.
BugCheck 139, {3, ffffd0002852d3e0, ffffd0002852d338, 0}
*** ERROR: Module load completed but symbols could not be loaded for SYMDS64.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMEFA64.SYS
Probably caused by : SYMDS64.SYS ( SYMDS64+71be6 )
Followup: MachineOwner
6: kd> !analyze -v
*                        Bugcheck Analysis                                    *
KERNEL_SECURITY_CHECK_FAILURE (139)
A kernel component has corrupted a critical data structure. The corruption
could potentially allow a malicious user to gain control of this machine.
Arguments:
Arg1: 0000000000000003, A LIST_ENTRY has been corrupted (i.e. double remove).
Arg2: ffffd0002852d3e0, Address of the trap frame for the exception that caused the bugcheck
Arg3: ffffd0002852d338, Address of the exception record for the exception that caused the bugcheck
Arg4: 0000000000000000, Reserved
Debugging Details:
TRAP_FRAME: ffffd0002852d3e0 -- (.trap 0xffffd0002852d3e0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=ffffe00059c129f0 rbx=0000000000000000 rcx=0000000000000003
rdx=ffffe0005718d2a0 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8020f9e8cdb rsp=ffffd0002852d570 rbp=0000000000000000
r8=0000000000005aa0 r9=00000000000007ff r10=ffffd00066cc8000
r11=ffffe00059963040 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl nz na pe cy
nt! ?? ::FNODOBFM::`string'+0x682b:
fffff802`0f9e8cdb cd29            int     29h
Resetting default scope
EXCEPTION_RECORD: ffffd0002852d338 -- (.exr 0xffffd0002852d338)
ExceptionAddress: fffff8020f9e8cdb (nt! ?? ::FNODOBFM::`string'+0x000000000000682b)
   ExceptionCode: c0000409 (Security check failure or stack buffer overrun)
ExceptionFlags: 00000001
NumberParameters: 1
   Parameter[0]: 0000000000000003
DEFAULT_BUCKET_ID: LIST_ENTRY_CORRUPT
BUGCHECK_STR: 0x139
PROCESS_NAME: System
CURRENT_IRQL: 2
ERROR_CODE: (NTSTATUS) 0xc0000409 - The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application.
EXCEPTION_CODE: (NTSTATUS) 0xc0000409 - The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application.
EXCEPTION_PARAMETER1: 0000000000000003
ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) amd64fre
LAST_CONTROL_TRANSFER: from fffff8020f9ddae9 to fffff8020f9d1fa0
STACK_TEXT:
ffffd000`2852d0b8 fffff802`0f9ddae9 : 00000000`00000139 00000000`00000003 ffffd000`2852d3e0 ffffd000`2852d338 : nt!KeBugCheckEx
ffffd000`2852d0c0 fffff802`0f9dde10 : ffffe000`59c8cc40 00000000`00000000 ffffe000`54b71040 fffff800`1d6d40b6 : nt!KiBugCheckDispatch+0x69
ffffd000`2852d200 fffff802`0f9dd034 : 00000000`00000000 00000000`00000000 ffff6d2d`50094127 fffff802`0f81458f : nt!KiFastFailDispatch+0xd0
ffffd000`2852d3e0 fffff802`0f9e8cdb : ffffc000`061df4e0 ffffc000`061df4e0 ffffc000`061dfbf8 00000000`00000000 : nt!KiRaiseSecurityCheckFailure+0xf4
ffffd000`2852d570 fffff800`1d7a0be6 : ffffe000`59e10120 fffff800`1d794388 ffffe000`54dfe9c8 fffff800`1d735f7c : nt! ?? ::FNODOBFM::`string'+0x682b
ffffd000`2852d5a0 fffff800`1d7a54e2 : ffffc000`061df4e0 ffffc000`061dfbf8 ffffc000`061df550 fffff800`1d7367ea : SYMDS64+0x71be6
ffffd000`2852d5d0 fffff800`1d737f20 : ffffc000`061df378 ffffc000`061dfbf8 00000000`00000000 ffffc000`05a9bf18 : SYMDS64+0x764e2
ffffd000`2852d620 fffff800`1d73e171 : ffffc000`051e6a88 ffffc000`05a9bf18 ffffc000`05a9bf18 ffffe000`5988cb00 : SYMDS64+0x8f20
ffffd000`2852d650 fffff800`1d782027 : ffffc000`061ea018 00000000`00000000 ffffe000`58409008 fffff800`1d794388 : SYMDS64+0xf171
ffffd000`2852d680 fffff800`1d79af21 : ffffc000`061ea018 ffffd000`2852d8c9 ffffe000`58409008 00000000`10000004 : SYMDS64+0x53027
ffffd000`2852d6c0 fffff800`1d9a3bb3 : ffffe000`58409078 fffff800`1d98b3e8 ffffe000`58409008 ffffd000`2852d8c9 : SYMDS64+0x6bf21
ffffd000`2852d6f0 fffff800`1d9a91fa : ffffe000`5840a1a8 ffffe000`58409008 00000000`00000000 ffffe000`00000000 : SYMEFA64+0xe9bb3
ffffd000`2852d720 fffff800`1d9ae015 : 00000000`00000000 00000000`00000000 ffffd000`2852d8c9 ffffe000`58a10e60 : SYMEFA64+0xef1fa
ffffd000`2852d760 fffff800`1d9adf4c : 00000000`01820201 ffffe000`58a10e60 ffffe000`58a10e60 ffffe000`58a10be0 : SYMEFA64+0xf4015
ffffd000`2852d790 fffff800`1d9b294c : ffffe000`59e0a150 ffffe000`58a10e60 ffffe000`5988ca80 ffffe000`58a10e60 : SYMEFA64+0xf3f4c
ffffd000`2852d7c0 fffff800`1d9a2435 : ffffd000`2852d8a0 ffffe000`599a4010 ffffd000`00000000 ffffe000`59e0a010 : SYMEFA64+0xf894c
ffffd000`2852d7f0 fffff800`1d6d528a : 00000000`00000000 ffffe000`59e0a070 ffffe000`5604e300 ffffe000`58a10e60 : SYMEFA64+0xe8435
ffffd000`2852d820 fffff800`1d71bf76 : ffffd000`2852d960 00000000`00000000 ffffe000`5604f900 ffffe000`571dab10 : fltmgr!FltpPerformPreCallbacks+0x31a
ffffd000`2852d930 fffff800`1d6d413a : ffffe000`57170dd0 ffffe000`571dabd0 ffffe000`59cf18c0 fffff802`0fd411a7 : fltmgr!FltpProcessShutdownRequest+0x122
ffffd000`2852d9b0 fffff802`0fbf7518 : ffffe000`57170dd0 00000000`00000001 ffffe000`571dabd0 fffff802`0fb54a90 : fltmgr!FltpDispatch+0x13a
ffffd000`2852da10 fffff802`0fbf7273 : 00000000`00000001 00000000`00000000 00000000`00000001 00000000`00000000 : nt!IopShutdownBaseFileSystems+0xb8
ffffd000`2852da90 fffff802`0fbfb722 : fffff802`0fbfb4b0 00000000`00000000 ffffe000`59963040 ffffe000`59963040 : nt!IoShutdownSystem+0x127
ffffd000`2852db10 fffff802`0f8d1adb : fffff802`0fbfb4b0 ffffd000`2852dbd0 00000000`00000000 ffffe000`59963040 : nt!PopGracefulShutdown+0x272
ffffd000`2852db50 fffff802`0f94d794 : ffffe000`59965800 ffffe000`59963040 ffffe000`59963040 ffffe000`54b71040 : nt!ExpWorkerThread+0x293
ffffd000`2852dc00 fffff802`0f9d85c6 : ffffd000`66c40180 ffffe000`59963040 ffffe000`59965800 00000000`00000000 : nt!PspSystemThreadStartup+0x58
ffffd000`2852dc60 00000000`00000000 : ffffd000`2852e000 ffffd000`28528000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
STACK_COMMAND: kb
FOLLOWUP_IP:
SYMDS64+71be6
fffff800`1d7a0be6 33d2            xor     edx,edx
SYMBOL_STACK_INDEX: 5
SYMBOL_NAME: SYMDS64+71be6
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: SYMDS64
IMAGE_NAME: SYMDS64.SYS
DEBUG_FLR_IMAGE_TIMESTAMP: 51f84c44
FAILURE_BUCKET_ID: 0x139_3_SYMDS64+71be6
BUCKET_ID: 0x139_3_SYMDS64+71be6
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x139_3_symds64+71be6
FAILURE_ID_HASH: {bf9be68b-5f04-08d4-3152-3d420dc362f6}
Followup: MachineOwner

Similar Messages

2010 Mac Pro Boot Camp - Refuses to boot Windows after installing Boot Camp drivers

Hey all,
I have a quad 3.2Ghz 2010 Mac Pro with a Radeon 5870 and 8 GB RAM.
I have 2 10000RPM WD Raptor drives, the first drive is my Lion boot drive. The 4th bay contains the second Raptor which has Windows 7 Ultimate 64 bit installed. Bay 2 has Time Machine, bay 3 has a Windows backup drive.
I had first installed Windows and the Boot Camp drivers a few months ago and everything was humming along smoothly. Monday I tried to boot into Windows and it crashed immediately after the black Booting Windows screen started to change to the login window. This happened repeatedly. Nothing changed on the system that I am aware of. Whenever I tried to boot windows again, it booted into the repair mode. That did not seem to work because after running the repair it would still not boot.
So I did what is usually required of Windows, and that was to reinstall. I reformatted the hard drive, ran Boot Camp assistant, and started the install.
Everything was peachy so far, so I tried to reinstall the Boot Camp drivers (4.0). Did a reboot. Same problem. Doh!
So I did ANOTHER reinstall, and everything was fine. But this time I tried to install the Boot Camp drivers off the os install disc that came with my Mac (3.1). Still no go!
So finally I did my third reinstall and after that I did not install Boot Camp drivers. However, I did load up the CD and individually installed drivers for the Apple Mouse, Apple Keyboard, Cinema Display, etc. No problems whatsoever. Everything is actually still humming along fine.
So it looks like running the full Boot Camp install for some reason no longer works. Which means I am missing the Apple Boot Camp control panel, but that's not really a big deal. Althought it's quite annoying to not have the functionality of the special Mac keyboard keys like volume control, etc.
Has anyone run into this? I thought it might be a hardware problem but my Mac OS X OS exhibits no problems whatsoever.
Thanks!

Thank you to The hatter.
I have a Mac Pro mid 2010 with a SSD and several internal hard disks. For some time I was trying to install Windows 7 on a fresh boot camp volume on a new WD 7200rpm 1TB hard disk. It was taking hours to install, and then I had a series of failures to reboot that proved permanent. The Window Repair utility would come up and took forever to repair the volume - but failed to actually do so, requiring completion reinstallation of the bootcamp volume. This occurred three times, between 1 day and 2 months after installation. I had already moved the Windows drive in to drive slot 1 of the Mac Pro.
Eventually I gave up and installed boot camp on a secondary partition of the SSD. This worked fine, however is limited in capacity. So yesterday I thought I would try to install Windows on the hard disk again. The Windows installer took many hours to do its thing, and eventually a message came up that the installation had failed.
I took your tip about possible hard disk failure, and ran Techtool Pro surface scan. It turns out that there are lots of bad blocks being reported. According to Micromat's documentation, the bad blocks being reported are those that may be in critical areas of the disk that cannot be mapped out. They recommend low level reinitialisation (with zeros) to map out the bad blocks, if possible. I am now running Apple's Disk Utility to do this, and fingers crossed that this reinitialisation succeeds, or I will have to replace the drive.

Windows 7 Freezes at Restart After Installing Boot Camp Drivers

Hi,
I have a MacBook Pro and am having troubles installing 32-Bit Windows 7. All seems to be functional until I install the Boot Camp drivers included on the Install Disk. I have tried using the Boot Camp 3.1 update, but the same problem occurs. After the computer freezes on the install page, I can no longer access Windows (even in Safe Mode) and am forced to restart the entire process (that is, repartition the hard drive and reinstall Windows).
If I don't install the Boot Camp drivers, Windows seems to be functional, so I'm pretty sure it's something in the Boot Camp package causing the trouble.
Is anyone else having this problem? Any ideas or workarounds?

I finally got it to work. You need to go to the NVidia website and install their drivers. I think the Apple supplied ones are out of date and are causing Windows to hang. Install Boot Camp from the supplied DVD, install the update that Apple supplies through the newly installed Boot Camp, and then go to the NVidia website to manually download the drivers. I used the GeForce 300M series installer. Make sure you do all of this before letting Windows restart.
I had a few issues with it hanging a few times, but once I was able to get into Windows it seems to be working. All of the other Apple supplied drivers seem to work.

Mid-2010 Mac Mini - black screen after installing boot camp drivers

I successfully installed Windows XP Service Pack 2 on my new Mac Mini. The display worked without issue in XP at this point.
After doing this, I proceeded to install the boot camp drivers. They installed and automatically rebooted the machine.
After reboot, Windows XP no longer has a functioning display. The display is a black screen and eventually the monitor shuts off.
Things I've tried:
- Reset PRAM
- Reset SMC
- Tried both Mini DisplayPort and HDMI connections to connect to the HDMI port on the monitor
- Booting into Safe Mode. Holding down F8 successfully brought up the Safe Mode options, but again the display was blank after choosing the Safe Mode option and attempting to load Windows.
Message was edited by: mullingitover

Update: Other stuff I've now tried--
- Swapping out RAM modules. I've tried it with the stock 2GB sticks in place, also with a single 4GB stick. Same result.
Other interesting/troubling problems:
- Unable to boot into Safe Mode with command line. The text-only interface with safe mode options that is reached by pressing F8 during windows startup is displayed. However, no matter which option I choose, the result is a dead display.
- Unable to boot with Windows XP install CD (?!). After choosing the CD at the boot selection screen, the display blanks and never wakes up.

When i turn on itunes, it crashes automatically with the error message saying "itunes has encountered a problem and needs to close." I've tried reinstalling itunes but its the same. CAN SOMEONE PLEASE HELP!!!

when i turn on itunes, it crashes automatically with the error message saying "itunes has encountered a problem and needs to close." I've tried reinstalling itunes but its the same. CAN SOMEONE PLEASE HELP!!!

Try:
iOS: If you can't back up or restore from a backup in iTunes

I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard.

I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.
I have hand-installed the NVidia graphics driver, and I have keyboard, minimal trackpad, and hardwire to internet all working. So the WIndows machine is usable. But I am hurting for wi-fi, better trackpad, and whatever else is delivered by Boot Camp. I can't use any of the Boot Camp upgrades because I do not have XP or Vista.

Dear Nathan,
Many thanks. To the best of my memory, that is how I got where I am today. Initially I had one failed setup, then discovered compatibility mode and ran using it. The result was not an obvious failure, but something was not there because not only were some drivers missing (wi-fi, trackpad, ...) but (much to my disappointment) the 3.1 update would not run. It complained that 3.0 wasn't there. If I hardwired to my home network, the machine would do almost everything I wanted, but the graphics were slow and clumsy. That is when I hunted around for the NVidia driver and downloaded it from NVidia. And that is where I stand now.
My son found this link http://www.simplehelp.net/2009/01/15/using-boot-camp-to-install-windows-7-on-you r-mac-the-complete-walkthrough/
which has instructions claiming to do the install straight to Win 7 without using compatibility mode.
Given that my clumsy efforts to patch things up have probably necessitated a Win 7 deinstall and reinstall to test either your plan or the one my son found, I am inclined to sit tight for a couple of days to see how much I can learn.
I appreciate your interest in this problem, and if you are up for reading the process at the link my son found and commenting, I would be grateful.
In any case, many thanks, Paul

I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.

I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.
I have hand-installed the NVidia graphics driver, and I have keyboard, minimal trackpad, and hardwire to internet all working. So the WIndows machine is usable. But I am hurting for wi-fi, better trackpad, and whatever else is delivered by Boot Camp. I can't use any of the Boot Camp upgrades because I do not have XP or Vista.

While we all have MacBooks in this forum not all of us use Boot Camp. There's a Boot Camp Support Community where everybody uses Boot Camp. You should also post this question there.
https://discussions.apple.com/community/windows_software/boot_camp

Numbers does not open with the main user after installing mountain lion. It works flawlessly when I use the second account on my mac. What got corrupted in the admin-account, something in the user-library? How can I fix it? I´m kinda desperate...

Numbers does not open with the main user after installing mountain lion. It works flawlessly when I use the second account on my mac. What got corrupted in the admin-account, something in the user-library? How can I fix it? I´m kinda desperate... (the same happens with the other iWork-Apps!)
Looking forward to hearing from somebody with a littlemore expertise than me, Chris

you can remove preferences files by navigating to the Preferences folder for your user as follows:
0) Quit ALL iWork apps (Keynote, Pages and Numbers)
1) from the Finder select the menu item "Go > Go To Folder…". This will bring up a dialog:
2) enter the path "~/Library/Preferences" (no double quotes)
3) find the files:
com.apple.iWork.Keynote.plist
com.apple.iWork.Numbers.plist
com.apple.iWork.Pages.plist
and move these to the trash. I would NOT empty until later.
4) restart Numbers

I partitioned a small drive for a windows program, and now the computer only wants to boot to Windows. How do I get back to Mac so I can have a choice of drives?

I partitioned a small drive for a windows program, and now the computer only wants to boot to Windows. How do I get back to Mac so I can have a choice of drives?

That doesn't sound good. It sounds like the power outage might have corrupted the partition for OS X. I would suggest booting from the Install DVD that came with your Mac while holding down the C key. Once you have selected the language start up Disk Utility from the pull down menu and repair the disk. Once you have done that then repair permissions also.
Allan

Bluetooth Keyboard/Mouse/Trackpad won't automatically connect after installing Boot Camp

Hey guys!
Another peculiar thing happened to me today with my 3-week-old maxed-out 2012 iMac (other than it kernel panicking when I powered it down the other day...did I mention this was 3 weeks old?).
After installing Boot Camp which I will never do again, my iMac (on the OS X side) no longer recognizes my stock Apple Wireless Keyboard, Magic Trackpad, or Magic Mouse automatically, until I press a button on the keyboard and wait 5 seconds, click the trackpad and wait 5 seconds, or click the mouse and wait 5 seconds.
(The Windows 8 Boot Camp side pairs with the devices immediately after Windows boots, which leads me to believe that the bluetooth devices are defaulting to look for Windows.)
One of my huge fears I had when considering purchasing an iMac is that the Bluetooth devices wouldn't immediately connect. Being a power-user with former Mac notebooks and working understandably fast having owned a web development company for 8 years now and not having to worry about Bluetooth device pairing, I'd like to think this fear is substantiated. But after first use (before installing Windows 8 with Boot Camp Assistant) it functioned normally and the iMac would automatically discover my peripherals and connect them by the time time computer turned on. I also had no trouble holding the Option key on boot to select a boot device....
Now, ever since I set up Windows 8 on the Boot Camp partition and paired the keyboard/mouse/trackpad to Windows, the Mac side completely ignores the keyboard/mouse/trackpad until I click a button on each.
I'm trying to keep it together but this is raging me out.
I went into Windows, immediately unpaired the 3 peripherals from windows and now use a wired keyboard/mouse with Windows (yay, desk space!), deleted the items entirely from the bluetooth panel, then booted to Mac and did the same thing. I then re-paired the devices to the OS X side andddd...no go! Still doesn't find them automatically. I am extremely upset by this and can't seem to fix it.
To summarize, my two issues are:
A. The iMac in OS X does not automatically recognize my bluetooth peripherals until I click a button on each and wait a couple seconds for them to pair.
B. I cannot hold Option to select a boot device (or choose Windows/Mac for example) because the computer doesn't recognize the keyboard until OS X boots and I press a key.
Please...for the love of god...someone help me, and stop me from formatting my entire computer over this issue.

I don't have a logitech mouse, but is it possible that the mouse is going to sleep during the reboot, and is thus unavailable when the OS is looking for it?

Can I dual boot snow leopard and mountain lion if I've installed boot camp on my drive

Can I dual boot snow leopard and mountain lion if I've installed boot camp on my drive

Yes as I said before. If your model Mac came with Snow Leopard and you are now running Mt Lion and have Windows installed in a Boot Camp Partition all you have to do is make the Mt Lion partition smaller, take the free space and make it another Mac partition and you should be able to install Snow Leopard into that partition.
I have Snow Leopard, Lion and Mt Lion installed on my MBP. No Windows in a Boot Camp partition because I run Windows XP in a Virtual Machine on both Lion and Mt Lion.

Unable to install Boot Camp Drivers for Windows

Mac Pro (2) 3.2 Xeon quads
Mac OS 10.5.2
Boot Camp side - Windows XP pro x64 w/SP2
Step 3 listed in the instructions for setting up Boot Camp is to Install the Boot Camp drivers for Windows. At this point Windows recognizes my Mac Install disk 1. I get the following message: "the installer encountered errors before Boot Camp could be configured. To retry these operations at a later time, please run the installer again." I am not sure if I needed to do something to install the Service Pack 2? My firmware is at MP31.006C.B02 and 1.25f4. When I checked for the latest firmware, it returned a message that it was not necessary.
Maybe the XP pro x64 is not compatible?
Barry in St. Louis

I did install windows xp sp2 32 bit on my macbook pro 2.2 GB and I'm getting the same ...
When trying to install boot camp drivers, a message came up saying:
Boot Camp requires that your computer is running Windows XP Service Pack 2 or Windows Vista.
The only option it gave me was to click the "OK" button. When I clicked OK , another message came up saying:
Boot Camp Installer completed. The install encountered errors before Boot Camp could be configured. To retry these operations at a later time, please run the installer again. Click "finish" to exit installer. I am running a brand new full retail version of windows xp service pack 2. Applecare will not help blaming Microsoft and of course Microsoft is blaming Apple. What a bunch of useless crap!! Can anyone help??

Windows 8.1 Not Working Properly after Updating Boot Camp Drivers to 5.1

Hi all!
Recently I had a problem with the sound in Windows 8.1 using BC v5. That problem was resolved by updating the Boot Camp Drivers to 5.1. Now I've more problems than before.
1. Some service are not loading at all at the startup (which did before)
The Boot Camp service is not loading automatically at startup, other Windows Services are not loading at the startup after updating the Boot Camp Drivers (Windows Update)
2. Microsoft Office cannot verify license for the product.
This problem is due to the services that won't start automatically. I can't even do a repair of MS Office 2013... Even though it's a legal version of MS Office.
There are many many more problems I think... I just haven't discovered them yet which is very very annoying. When I was using Windows 8.1 with the Boot Camp Drivers version 5 there were few bugs than now...
Please is there any notice of these errors? Or am I the only one who is experiencing these errors??? Please give me some answers!
Thanks in advance!!

I updated them by downloading the zip file from the Apple site...
I've just updated Mac OS X and it seems that this was the solution... Everything works fine! (For now)

DVD Drive disappeared after installing Boot Camp on Windows 8

I am running Mountain Lion and I bootcamped Windows 8... this is a fresh install.
1. I installed Windows 8 and the DVD is still working
2. I installed Bootcamp software via DVD and was asked to reboot
3. I reboot my iMac
4. Now, my friggin DVD doesnt work anymore...
5. I look at My Computer and it's gone.
6. I look at the device manager and it's not there
7. I showed hidden devices and the hl-dt-st dvdrw ga32 is there (disabled of course)
8. i am writing to apple community after a night of searching for a solution in vain.
please help me. i really need my DVD drive
thanks in advance

thanks for the response
1. Yeah I thought that's a mandatory thing because i need to be able to control the brightness with my keyboard, updated graphics card, boot camp control panel, etc
2. No there's no enable for this because Windows 8 recognizes it as a "disconnected device" and asks me to reconnect the dvd drive to the machine (which it obviously already is).
3. Ive tried those before, also even editing the registry but it didnt work.
It's weird because it never happened before on Snow Leopard » Lion bootcamp driver updates. Just in Mountain Lion

Blue screen of death after installing Boot Camp on Windows 7

Hello and thanks for the help!
Brnad new user to Boot Camp here. After a new install of Windows 7, I install Boot Camp but then when rebooting Windows I get the blue screen of death. When letting Windows attempt a repair, it fails and I am forced to Recover Windows 7 to a state before I installed Boot Camp.
Help!?

Solution for this problem is simple. You have to apply Mac Book Air SMC Update 1.7 which you can do from Mac OS X with Software Update or you can download required update manually from Apple support site. If you don't use BootCamp and have installed Windows without it, you will have to boot Mac OS X from external drive just to apply required update. After you applied SMC update, you can boot to Windows and apply BootCamp update 3.2 and 3.3.
There is a known problem with Mac Book Air EFI Update 2.3, which you won't be able to apply and it will show in Software Update every time you check for updates. There is no solution for it yet.
You get BSOD if you have BootCamp 3.1 and Windows 7 SP1 installed and you have commited Windows update which will break applemtp.sys as your SMC firmware is too old. It applies to Windows 7 32 bit and 64 bit versions in BootCamp or native install.

Windows 8 crashes and with the error "kernel_security_check_failure" after installing Boot Camp drivers.

Similar Messages

Maybe you are looking for