Windows Error -82: Unable to load Device Driver

I have an app that was running smoothly for the past couple YEARS, on a PXI system (PXI controller).
Suddenly the user is getting this error when the acquisition is initiated (note: There are both NI cards and non-NI hardware on the system)
Anyone seen it before?

It looks like the error occurs with the Third party hardware. What type of third-party hardware you have in your system and what is the type of interface?

Similar Messages

I cant sync my iphone 5s on windows itunes, keep getting error message unable to load dataclass information from sync services.

i can not sync my iphone 5s on itunes on windows. keep getting error message "unable to load dataclass information from sync services" when plugging in my phone.
I have tried uninstalling itunes and re-installing it.
Turning off firewall and antivirus.
Has anyone had this before and if so how did you over come this issue?
Thanks in advance

Hey troyboi12345,
Thanks for using Apple Support Communities.
To troubleshoot this issue, follow this article.
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
http://support.apple.com/kb/ts2690
Have a nice day,
Mario

Unable to Load USB Driver in LV for Total Phase's Aardvark I2C adaptor

I have tried to instal Total Phase's Aardvark I2C USB driver for LabVIEW on two computers and two versions of LV (8.5 and 7.1) without success. The Windows driver seems to be working fine as their command center gui terminal-esque program works without a hitch, but the LV DLL doesn't seem to work.
Attached is the very simple vi to find connected Aardvark USB devices (aa_find_devices). It always returns the same error code, 8002, which resolves to:
AA_UNABLE_TO_LOAD_DRIVER
-2
unable to load USB driver
From their documentation: http://www.totalphase.com/docs/aardvark_datasheet/sect005/#s5.9
This looks like perhaps the LabVIEW DL, "aardvark.dll" maybe having a versioning issue. So my question is this: Using LabVIEW, how does one debug dll dependencies and resolve issues like this? Do I need the source code for the lib?
Cheers,
Joe Gorse
Solved!
Go to Solution.
Attachments:
find_devices.vi ‏11 KB

Dear Joe,
Let me start off by apologizing for the inconvenience you
have gone through. I am an engineer at Total Phase. We are
working on fixing this issue for our next release of the
Aardvark LabVIEW Driver. This forum post was only brought
to our attention today. In the future, you can also let
Total Phase know about these kinds of issues by emailing
[email protected] We are very responsive through
email or phone.
The problem you are experiencing has to do with versioning
issues between our DLL and USB driver. Specifically, DLLs
before v5.xx must use the older version of our USB driver.
By replacing the DLL from our latest version of Control
Center, you have effectively upgraded the DLL that the
LabVIEW driver is using and made it compatible with v2.xx of
the USB driver.
The most likely reason that smercurio_fc did not see a
difference between the DLL in Aardvark Control Center and
the LabVIEW driver is because he is using an older version
of Control Center and correspondingly an older version of
the USB driver.
The reason that we have not packaged the LabVIEW driver with
latest DLL is due to the fact that a few functions have
changed their function prototypes (for example aa_open_ext
and aa_spi_write), and the VIs have not yet been updated
accordingly. Although updating the DLL solved your USB
driver issue, it introduced this new issue. If you try to
use these certain VIs, LabVIEW will error out.
We are currently working on updating the LabVIEW drivers to
work cohesively with the new DLL and USB driver, and this
should be available soon. If you need immediate
availability to the functions with new prototypes you will
have to change it manually. The other recommended option is
to simply revert back to the DLL that is packaged with our
LabVIEW driver and downgrade the USB driver back to v1.xx.
I will make sure to post again once the update is released,
and I once again apologize for the inconvenience.
Best regards,
Etai

"Error 1002097 Unable to Load database" while starting an Essbase App.

Hello Essbase Experts,
I am getting below error while starting an Essbase Application:
"Error 1002097 Unable to Load database"
Below is an extract from the Essbase Application Log:
[2012-04-04T14:14:03.816-19:14] [RPA] [ESM-6] [ERROR] [32][] [ecid:1333566842161,0] [tid:2058170128] Unable to lock file
[SID/essbase/user_projects/epmsystem/EssbaseServer/essbaseserver1/app/RPA/RPA/RPA.esm]. Essbase will try again after a short
delay.
[2012-04-04T14:14:04.821-19:14] [RPA] [ESM-5] [ERROR] [32][] [ecid:1333566842161,0] [tid:2058170128] Unable to lock file
[SID/essbase/user_projects/epmsystem/EssbaseServer/essbaseserver1/app/RPA/RPA/RPA.esm]. Please make sure other processes do not
access Essbase files while Essbase server is running.
[2012-04-04T14:14:04.821-19:14] [RPA] [MBR-89] [WARNING] [1][] [ecid:1333566842161,0] [tid:2058170128] Unable to open
[SID/essbase/user_projects/epmsystem/EssbaseServer/essbaseserver1/app/RPA/RPA/RPA.esm] for database
[RPA][2012-04-04T14:14:04.821-19:14] [RPA] [SVR-97] [ERROR] [32][]
[ecid:1333566842161,0] [tid:2058170128] Unable to load database [RPA]
[2012-04-04T14:14:04.821-19:14] [RPA] [SVR-97] [ERROR] [32][]
[ecid:1333566842161,0] [tid:2058170128] Unable to load database []
[2012-04-04T14:14:04.835-19:14] [RPA] [SVR-97] [ERROR] [32][]
[ecid:1333566842161,0] [tid:2058170128] Unable to load database []
Please sugest pointers to start the application.
Thanks,
KK

*[2012-04-04T14:14:03.816-19:14] [RPA] [ESM-6] [ERROR] [32][] [ecid:1333566842161,0] [tid:2058170128] Unable to lock file*
Solution would be easy ...like if the Essbase Agent is stopped using the services.msc (services panal)on Windows while a process is currently running, or if there has been an abnormal termination of the Essbase Agent, orphaned ESSSVR processes can be left. Shuting down the Essbase server using ESSCMD or MaxL then Check Task Manager confirm the ESSBASE.exe process later by this ESSSVR.exe processes should end if still NO then Do an "End Process" on any ESSSVR.exe process that is still running. Start the Essbase service and start the application.
ESSSVR.exe is process which keep application Alive (bad thing is if u have many applications running similarlly u have same numbe of ESSSVr .exe will be running in task master ..but u cant find out which one belongs to which application :( )
Reasons
looking at your error i can say , First of all you need to know what is Lock in EAS ? and what locks exist
(right-click on Essbase Servername, EDIT->LOCK and EDIT->LOCKED OBJECTS, and if your database/outline appears in there, unlock it.)
Check any antivirus- and backup software that may be scanning / running on your Essbase folders as that can lock the files and any ESSSVR process stays when the Essbase Agent is stopped
More over another chance of getting error is when you have you page and index files in different location and rest otl, rep.csc script in another drive .. usually while taking back up in OTL,csc drive u do get created index file and page file even u have page and index file in diffrent drive so doe to this u get this error unable to load database
Hope this give u some idea

How do I fix error message "unable to load sync UI Corel localized.dll"

How do I fix an error message "Unable to load sync UI Corel localized.dll"? All of a sudden I can no longer sync my Windows PC to my iphone. I also noticed that just prior to the problem occuring there was an itunes software upgrade that occurred. It may or may not be related to the problem.

Hi Barrlee,
Thanks for using Apple Support Communities. If iTunes doesn't recognize your iPhone, this article may help:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If issues persist, a thorough removal and reinstall of iTunes would be the next thing to try:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Cheers,
- Ari

NTKERN.VXD could not load device driver

I just installed the MSI 6380LE board with an AMD 2100+ CPU. I have the nVIDIAGe2 Ti video card. Two problems. When I restarted the computer after transfering my WD 20Gb HD, Phillips CD-RW, and SMC lan card to my computer it went thru the New Hardware sequence. No problems there. My printer was detected on the USB port in the back. However, when I went to print, got a cannot communicate with printer error from my Lexmark printer program. I went to my device manager and noticed that the following occurred:
VIA VT83C572/VT82C586 PCI to USB Universal Host
---> USB Root Hub!
This is repeated three times in the device manager.
When I click on properties for the USB Root Hub it tells me that the NTKERN.VXD could not load device driver.
Second issue. I have a new case that has front USB ports, however, the pin connectors are all separated and I am not sure how to hook them up to the MB correctly as I did not notice in the manual the pin assignments for those connectors. ANY help is greatly appreciated. And yes, USB is enabled for all in my BIOS setup.
Thanks in advanc!!!

well I did the same thing with my KT3 Ultra ARU, but it works fine other than the low system stability and generally slow behavior of the HDD's since they were not optimized for this board.. but generally everything works fine, but I will need to reload windows in order to have everything moving smoothly again, plus when you do reload windows you will notice a definite speed increase, and if is generally a good idea to back up your important files and do a clean install ever so often, Most IT techs reinstall their OS's every 6-8 months.

Error message: "Unable to load screen : root. ChangeLocation.ChangeLocationStart"

I paid for & downloaded zagat to go app from handmark & it fails to run on my bb tour. Here is the error message I keep getting on my bb tour - "Unable to load screen : root. ChangeLocation.ChangeLocationStart". I've tried everything, including uninstalling and reinstalling the zagat app and I keep getting the very same error message: "Unable to load screen : root. ChangeLocation.ChangeLocationStart".
btw, I have plenty of free space on my device. HELP!!!
I tried Handmark support several times, to no avail. Thanks very much. mike

I'm having the same problem. Have tried uninstalling, reloading, nothing. Also read something about do not select Verizon as a carrier, but to use bizB, however on the 7. (new version) I'm trying to install bizB is not an option. Help please!

I am trying to download Adobe Flash Player 10 and i keep getting an error message Unable to load a G

I'm trying to download Adobe Flash
Player 10 and i keep getting an error message "unable to load GUI" i am currently using
Windows XP Professional is anyone able to help me? I am almost 6
5 and have a very limited knowledge of computers!!!!!!!!!

Hi Terry, A post is the message that anyone has just typed in. When you replied to me, that was your post. I am replying to you so this is my post. Think of it as sending an email or mailing a letter at the "post" office.
Now right at the top of the last post (message) you sent me is a Post#, then the date and time and under that the thread subject "Re: I am trying to download Adobe Flash Player 10 and I keep getting......
The first time that you posted, you described your problem. The next post after that is #1 and so on.
The Adobe Flash Player forum works very much like email except there are a lot of "threads". A thread is what each message you see is called. Everyone that registers can start their own thread (subject). Then other people see it and can post to your thread and try to help you with your problem.
You did pretty good, you registered, and you started your first thread
Now do you feel somewhat more relaxed? Hope so.
Take a look now and see if you can find the Post# and etc that I described above.
Thanks,
eidnolb

Unable to load iCloud drive

I,m trying to access iCloud Drive through iCloud.com, but when I log in and click on iCloud Drive, I get the error message, "Can't load iCloud Drive. There was a problem loading the application." I have always had this problem, I have never been able to access it. It is activated on all my mobile devices and my iMac, all of which are running the latest versions of iOS and Mac OS X.

Duplicate of, Can't Load iCloud Drive, no solution since at least 1st of January! 3 months! Come on Apple!

Getting the following error:Error(8): Unable to load taghandler class

I'm trying to deploy a report on OAS...In Jdeveloper, when I run my application, i get the following error:
Error(8): Unable to load taghandler class: /WEB-INF/lib/reports_tld.jar
Does anyone know how to fix this problem?
Thanks.

Eric, this can happen after a failed update that partially changed your Firefox install directory.
Try a clean reinstall:
1. Download the Firefox installer from [http://mozilla.com Mozilla.com] and save it to your desktop or other location.
2. Make sure that Firefox is closed completely
3. Delete the Firefox installation directory (On Windows, this is typically the C:\Program Files\Mozilla Firefox folder that contains "firefox.exe" and other Firefox program files and folders).
4. Reinstall Firefox by running the installer you downloaded previously.
Your personal settings, including bookmarks and history, will not be lost.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Unable to load Device Software to BB Torch 9800

Hi,
I'm unable to load Device Software to my phone. Have tried with various Bundle from Various Carriers, still there seems to be no luck at all. Its basically dead now with no OS on it. I've tried with various Version of DM and DS, still nothing seems to be working what so ever.
My exact problem is, it's stuck at "Reconnecting to JVM" and that's it, nothing happens after that. There is a continuous blink of red light for seconds and that's it.
I have tried all possible solutions given in this forum, still no avail.
Could someone please help with this as a matter of urgency.
Appreciate your help.
Thanks.

Manual device OS upgrade instructions:
1. First locate your carrier and the OS file you wish to use.
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
2. Do a backup of your device first, using Desktop Manager > Backup. Close Desktop Manager upon completion and unplug BlackBerry. Get DM here http://us.blackberry.com/apps-software/desktop/
3. Download the OS file to the PC then install it to the PC by running (double clicking) the file you downloaded.
4. Go to c:\program files\common files\research in motion\apploader and delete the file named "vendor.xml."
5. This step is not needed unless there is an issue on next steps. Use BBSAK from BBSAK.org and wipe the device (after doing a complete backup) then after you get the error 507 (no OS installed) then proceed to step 6
6. remove internet connection to PC and reboot PC.
7. Plug in BlackBerry and double click on "Loader.exe." It's located in the same place as the above vendor.xml file was in.
8. if you did Step 5, restore from back up. Follow this KB if needed http://www.blackberry.com/btsc/KB10339
Enjoy the new OS.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Hyperion Essbase Error: 1002097 Unable to load database [PlanType1]

Hello,
I am running Hyperion Essbase 9.2.0.3 version. This has happened 3 times now since last 2 weeks. I had to restore the APP folder from previous backup.
The message that i see is Error: 1002097 Unable to load database [PlanType1]
I have searched google and no luck. Anyone knows how to fix this or why we get this message. I don't want to restore from backup everytime.
Thanks
Azmat Bhatti

I think you have currepted backup.
Try run essmsh script to recover broken block's.
Backups - Files still locked after beginarchive

Torrentflux 2.4 (ADONewConnection: Unable to load database driver)

I'm trying to setup Torrentflux 2.4 on my server.
I used the torrentflux PKGBUILD vom AUR: http://aur.archlinux.org/packages.php?ID=1664
I set up Apache/MySQL/PHP following the guide. PHP test script is working fine:
<?php phpinfo(); ?>
I setup a symbolic link from /srv/http to my /opt/torrentflux
ls /srv/http/
insgesamt 4
-r--r--r-- 1 root root 20 6. Mär 21:23 test.php
lrwxrwxrwx 1 root root 17 6. Mär 21:07 torrentflux -> /opt/torrentflux/
When I try to open /torrentflux/login.php in my webbrowser it says
ADONewConnection: Unable to load database driver ''
I left the default in torrentflux' config.php:
$cfg["db_type"] = "mysql"; // mysql, postgres7, postgres8 view adodb/drivers/
ls /opt/torrentflux/adodb/drivers/
insgesamt 532
-r--r--r-- 1 root daemon 20476 6. Mär 20:44 adodb-mysql.inc.php
-r--r--r-- 1 root daemon 25340 6. Mär 20:44 adodb-mysqli.inc.php
-r--r--r-- 1 root daemon 3220 6. Mär 20:44 adodb-mysqlt.inc.php
I'm pretty new to the whole LAMP stuff, so can please any1 tell me what's going wrong?

Ok, some questions:
1. Did you enable mysql in php.ini?
http://wiki.archlinux.org/index.php/LAMP#MySQL
2. Did you read / follow the torrentflux installation guide included with the installation?
(if not, check here: http://www.torrentflux.com/)
3. I have not worked with the package from AUR, the package form the official site (again, http://www.torrentflux.com/) works well for me. Did you try this?

Error --1002097 Unable to load database

Hi,
Essbase version 7.
I am having a problem when I am trying to start database or running Essbase give me an Error: 1002097 Unable to load database.(error 1002097 is related to the db corrupt.) this is on PRD server.
we have 2 more server ,(.BS & Dev).
1.I copied the Db from the BS to PRD --- but the application and DB in the PRD system failed to start giving the same error 1002097 .
2.next i did was to migrated the same application from BS to Dev system which went fine and i can see the outline . Application is getting started in the DEV system .
3. Since it was okay in DEV. i migrated the application from BS TO PRD .it got migrated but it is not starting giving me the same error 1002097.
any help will be great.
thanks
ram
Thank you,

Re: How can we Restore a corrupted cube.

Essbase Error Error: 1002097 Unable to load database

Hi,
I am using essbase 7.1. I am having a problem when I am trying to run any calc start application or database or doing anything Essbase give me an Error: 1002097 Unable to load database. I restart essbase services but nothing happen. Any help would be great.
Thank you,

I am currently getting the same error, it happens randomly on different models each day at around the same time. I have found this error on the log for one model.
Unable To Find Or Open [e:\Program_Files\Hyperion\Essbase\bin\APP\LAdPBurn\LAdPBurn\ess00011.pag]
I think the data files are locked by something, I am checking with our server team to see when the backups run as there are no other processes running at this time in Essbase. Incidentally the model has 15 .pag files.

Windows Error -82: Unable to load Device Driver

Similar Messages

Maybe you are looking for