Windows Installer (MSI 5.0) fails with ERROR 1939 during "MsiConfigureServices" action

When trying to install a setup package using the new MSI 5.0 features of Windows Service Configuration (using Tables: MsiServiceConfig / MsiServiceConfigFailureActions)
the service config fails and results in a rollback.
The service itself is installed along with the same package under "LocalSystem" account.
Regarding MSDN, these feature does have some limitations, but I am not shure if they are applicable here:
"The services configuration feature of the Windows Installer cannot configure network service accounts, install shared service host (svchost) processes, or restart services stopped as part of the installation"
(see
http://msdn.microsoft.com/en-us/library/windows/desktop/dd408113(v=vs.85).aspx )
I have tried this with serveral variations on the failure actions count and type.
Using SC_ACTION_NONE or SC_ACTION_RUN_COMMAND actions indeed work and lead to a successful install.
Can you tell, why SC_ACTION_RESTART or SC_ACTION_REBOOT does not work fine?
PS: The guys on MS Connect didn't want so solve that issue ;-)
https://connect.microsoft.com/WindowsServer/feedback/details/785032/windows-installer-msi-5-0-fails-with-error-1939-during-msiconfigureservices-action

Hi,
For this query, I suggest ask in MSDN forum
http://social.msdn.microsoft.com/Forums/windowsdesktop/en-US/home?category=windowsdesktopdev
TechNet Subscriber Support |If you have any feedback on Technet forum, please contact [email protected]

Similar Messages

Windows Server 2008 R2 Backup failing with error - 0x8004231F

Hi,
I have Windows Server 2008 R2 Web Edition. Everything was working fine until recently. I tried checking for the log files, but I see that there are no log files that are created now in the location C:\Windows\Logs\WindowsServerBackup. The only files that
are being created recently are of the type mentioned below.
Wbadmin.1.etl
WbadminUI.0.etl
etc.
I tried removing the old backup and starting a new backup. But, even now it is failing with the same error.
When running the backup from the PowerShell, the output is as below.
PS C:\Users\administrator> Wbadmin start backup -backupTarget:\\localhost\E$\WindowsImageBackup\Server01 -systemState -vss
Copy
wbadmin 1.0 - Backup command-line tool
(C) Copyright 2004 Microsoft Corp.
Note: The backed up data cannot be securely protected at this destination.
Backups stored on a remote shared folder might be accessible by other
people on the network. You should only save your backups to a location
where you trust the other users who have access to the location or on a
network that has additional security precautions in place.
Retrieving volume information...
This will back up volume System Reserved (100.00 MB) (Selected Files),SAN(I:) (Selected Files),Local Disk(C:) (Selected
Files) to \\localhost\E$\WindowsImageBackup\Server01.
Do you want to start the backup operation?
[Y] Yes [N] No y
The backup operation to \\localhost\E$\WindowsImageBackup\Server01 is starting.
Starting to back up the system state [12/8/2013 9:29 AM]...
Creating a shadow copy of the volumes specified for backup...
Creating a shadow copy of the volumes specified for backup...
Creating a shadow copy of the volumes specified for backup...
Summary of the backup operation:
The backup of the system state failed [12/8/2013 9:30 AM].
Log of files successfully backed up:
C:\Windows\Logs\WindowsServerBackup\Backup-08-12-2013_09-29-49.log
Log of files for which backup failed:
C:\Windows\Logs\WindowsServerBackup\Backup_Error-08-12-2013_09-29-49.log
There is not enough disk space to create the volume shadow copy on the storage location. Make sure that, for all volumes
to be backup up, the minimum required disk space for shadow copy creation is available. This applies to both the backup
storage destination and volumes included in the backup.
Minimum requirement: For volumes less than 500 megabytes, the minimum is 50 megabytes of free space. For volumes more th
an 500 megabytes, the minimum is 320 megabytes of free space.
Recommended: At least 1 gigabyte of free disk space on each volume if volume size is more than 1 gigabyte.
ERROR - A Volume Shadow Copy Service operation error has
occurred: (0x8004231f)
Insufficient storage available to create either the shadow copy storage file or other shadow copy data.
If you see the free space available in each of the drives, they are in plenty.
C:\ 7.5 GB free of 70 GB
E:\ 250 GB free of 499 GB
I:\ 86.7 GB free of 350 GB
I am out of any hints on how I can proceed now. Has any one had similar issues? Can any one give any hint on this? Thanks.
Thanks.

Some Additional info.
Shadow Copy Storage association
   For volume: (\\?\Volume{a9fb0474-f1bd-11e0-b235-806e6f6e6963}\)\\?\Volume{a9f
b0474-f1bd-11e0-b235-806e6f6e6963}\
   Shadow Copy Storage volume: (\\?\Volume{a9fb0474-f1bd-11e0-b235-806e6f6e6963}
\)\\?\Volume{a9fb0474-f1bd-11e0-b235-806e6f6e6963}\
   Used Shadow Copy Storage space: 0 B (0%)
   Allocated Shadow Copy Storage space: 0 B (0%)
   Maximum Shadow Copy Storage space: 32 MB (32%)
Shadow Copy Storage association
   For volume: (I:)\\?\Volume{ddf6a51c-1282-11e3-b291-000c293b01d1}\
   Shadow Copy Storage volume: (I:)\\?\Volume{ddf6a51c-1282-11e3-b291-000c293b01
d1}\
   Used Shadow Copy Storage space: 0 B (0%)
   Allocated Shadow Copy Storage space: 0 B (0%)
   Maximum Shadow Copy Storage space: 35 GB (10%)
Shadow Copy Storage association
   For volume: (E:)\\?\Volume{0e3bf713-125d-11e3-b2dd-000c293b01bd}\
   Shadow Copy Storage volume: (E:)\\?\Volume{0e3bf713-125d-11e3-b2dd-000c293b01
bd}\
   Used Shadow Copy Storage space: 0 B (0%)
   Allocated Shadow Copy Storage space: 0 B (0%)
   Maximum Shadow Copy Storage space: 149.999 GB (30%)
Shadow Copy Storage association
   For volume: (C:)\\?\Volume{a9fb0475-f1bd-11e0-b235-806e6f6e6963}\
   Shadow Copy Storage volume: (C:)\\?\Volume{a9fb0475-f1bd-11e0-b235-806e6f6e69
63}\
   Used Shadow Copy Storage space: 0 B (0%)
   Allocated Shadow Copy Storage space: 0 B (0%)
   Maximum Shadow Copy Storage space: 4.99 GB (7%)
Hope this might also help you experts to get a little more information.

Windows Server 2008 R2 Backup Fails with error "Parameter is Incorrect"

When i try to take backup of Windows Server 2008 R2 and Windows Storage server 2008 to External hard drive. It gives error "Parameter is incorrect".
Am taking full Server backup from server backup utility. Backup includes (System State, Bare metal recovery and 5 local drivers). Full back size is 1.2TB.

Hi,
Can you post unedited error event log related to VSS from application log? Are you using windows server backup tool? If yes, please post error event log from "Applications ans Services Logs\Microsoft\Windows\Backup "
Thanks,
Umesh.S.K

CCMSetup failed with error code 0xc0000142 on newly imaged machines

I've run into some curious errors when installing clients on newly imaged machines. After machines are deployed and joined to the domain, we run a Startup Script from AD that looks for the existence of the client and if not installs it.
The newly imaged machines all display these errors in ccmsetup.log
Installing file 'C:\windows\ccmsetup\vcredist_x86.exe' with options '/q /norestart /c:"msiexec /i vc_red.msi /qn REBOOT=ReallySuppress" /msioptions "REBOOT=ReallySuppress"'.
File 'C:\windows\ccmsetup\vcredist_x86.exe' returned failure exit code 3221225794. Fail the installation.
InstallFromManifest failed 0xc0000142
A Fallback Status Point has not been specified. Message with STATEID='311' will not be sent.
Deleted file C:\windows\ccmsetup\ccmsetup.xml
CcmSetup failed with error code 0xc0000142
If I reboot the systems one more time after these failures, the setup continues and succeeds in every case. Has anyone run into this before?
Orange County District Attorney

Does the machine have a pending reboot before installing the client?
Edit: just to add you could enable verbose logging on a freshly imaged machine.
Then look the the windows installer log file for the re distributable that fails to install.
If you search for "return value 3" in the log file, just above should be the reason it fails.
You can enable verbose logging for all MSI files with
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\Installer]
"Logging"="voicewarmup"
vcredist_x86.exe always has 1 or 2 MSI's embedded depending on which redist it is.
The log should be in Windows\Temp if running under the system account or %appdata% for the account that's running the script.

I have Creative Suite 6 Design & Web Premium installed on my HP Windows 7 laptop. All of a sudden Acrobat Pro will not open and I cannot reinstall. Get errors 2203, & Error-Install MSI payload failed with error 1603. Help.

I have not been able to reinstall Acrobat Pro on my laptop. I have Suite 6 Design & Web Premium on my HP laptop. I have Windows 7 operating system. All of a sudden Acrobat Pro will not open so I uninstalled and tried to reinstall the program.
The error messages I get are:
ERROR: Error 2203.Database: C:\Windows\Installer\12102c.ipi. Cannot open database file. System error -2147287035.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 2203.atabase: C:\Windows\Installer\12102c.ipi. Cannot open database file. System error - 2147287035.
ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603
Help PLEASE!

Hi Patricia ,
For error 2203 ,please refer to the following link.
https://helpx.adobe.com/creative-suite/kb/error-2203-install-creative-suite.html
For error 1603 ,refer to this link.
https://helpx.adobe.com/creative-suite/kb/error-1603-install-cs3-cs4.html
Let us know if this solves the issue .If required ,we"ll surely assist you further.
Regards
Sukrit Dhingra

Windows Server 2008 R2 Service Pack 1 installation failed with error code 0x800f0a12

Hello,
I'm facing problem to install windows server 2008 R2 SP1. I cannot install SP1. In this server have running Exchange 2010 server. to update Win2008 R2 SP1 facing the following error:
1. Service Pack installation failed with error code 0x800f0a12.
2. Installation Failure: Windows failed to install the following update with error 0x80070643: Windows Server 2008 R2 Service Pack 1 for x64-based Systems (KB976932).
Please suggest

Please run the system update readiness tool.
http://windows.microsoft.com/en-us/windows7/What-is-the-System-Update-Readiness-Tool?SignedIn=1
Then post the complete contents of;
%SYSTEMROOT%\Logs\CBS\CheckSUR.log
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

I have a problem updating my AcrobatX ERROR: Install MSI payload failed with error: 1603 - Alvorlig feil under installasjonen. MSI Error message: Ugyldigt drev: K:\ ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603

Acrobat X problem updating.
ERROR: Install MSI payload failed with error: 1603 - Alvorlig feil under installasjonen.
MSI Error message: Ugyldigt drev: K:\
ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603
I have uninstalled my AcrobatX and now This message appear when I try to reinstall:
ERROR: Install MSI payload failed with error: 1603 - Alvorlig feil under installasjonen.
MSI Error message: Ugyldigt drev: K:\
ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603
Is there anybody who know how to solve it?

Hi Patricia ,
For error 2203 ,please refer to the following link.
https://helpx.adobe.com/creative-suite/kb/error-2203-install-creative-suite.html
For error 1603 ,refer to this link.
https://helpx.adobe.com/creative-suite/kb/error-1603-install-cs3-cs4.html
Let us know if this solves the issue .If required ,we"ll surely assist you further.
Regards
Sukrit Dhingra

Client installation fails with error: The client version 4.00.6487.2000 does not match the MP version 2.50.4253.3000. The client wil not be installed.

Hello World,
I have this remote server that used to be a sms 2003 secondary site server. We uninstalled the SMS role. And used the server as an SCCM remote distribution point. We also want to install an client agent on that server machine. But no mather how i try
to install the client i always see the same error in ccmsetup.log:
File download 100% complete (17847296 of 17847296 bytes). ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Download complete. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Successfully downloaded client files. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Searching for available transform ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Failed to find resource file 'client.mst' ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
No transform available for this locale. Installation will proceed with no transformation. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Updated security on object C:\WINDOWS\system32\ccmsetup\. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
An MP exists on this machine. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
The client version 4.00.6487.2000 does not match the MP version 2.50.4253.3000. The client will not be installed. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
A Fallback Status Point has not been specified. Message with STATEID='318' will not be sent. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Deleted file C:\WINDOWS\system32\ccmsetup\WindowsServer2003-KB923845-x86-ENU.exe.download ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
I think the installer finds some remenance of the old SMS_MP. When looking i found some remains in IIS . I tried to remove the remains but still have the same error when installing the client. I uninstalled IIS completly. Can someone tell me where the client
installer looks for the MP version? Would it help if i installed an SCCM MP on that server and the uninstalled it (Upgrade the MP)?

Hello Kent, i ran the ccmclean.exe from the SMS2003 Toolkit. It informed me that my system was cleaned. I ran the sccm client setup manualy and found this in the ccmsetup.log
MSI PROPERTIES are SMSSITECODE=AUTO CCMHTTPPORT="80" CCMHTTPSPORT="443" INSTALL=ALL ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
IsFileMicrosoftTrusted Verified file 'C:\WINDOWS\system32\ccmsetup\{4CD82FBB-0AFC-4864-A089-15364DF5F14B}\client.msi' is MS signed. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
Running installation package
Package: C:\WINDOWS\system32\ccmsetup\{4CD82FBB-0AFC-4864-A089-15364DF5F14B}\client.msi
Log: C:\WINDOWS\system32\ccmsetup\client.msi.log
Properties: SMSSITECODE=AUTO CCMHTTPPORT="80" CCMHTTPSPORT="443" INSTALL=ALL ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: INSTALL. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder.12C909B6_5F69_4C4D_8EC3_C225C1607933. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder.A6940213_CD40_4753_8BA2_E803376DECC3. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: WindowsFolder.8AE6A59B_5597_4D75_9BFD_7F566BF56500. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder.98C5B086_7EB0_422A_B0A8_674010F525CD. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder.4C5E03E8_F8E5_47CB_8FF4_E46FE34D35A6. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: System64Folder.597B26B2_B5D6_40FF_90DA_B8E672626B1D. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: System64Folder.541D9CA5_CE53_4DCE_903A_9B9E5A6EF2C6. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SmsCheckConfig. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:22: SMSValidateClientInstallStamp. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: LaunchConditions. Evaluating launch conditions ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: SmsDetectWindowsEmbeddedFBWF. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: SmsCheckNewRemoteTools. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: AppSearch. Searching for installed applications ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: CCPSearch. Searching for qualifying products ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: RMCCPSearch. Searching for qualifying products ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: ValidateProductID. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: CcmSetInstallDir. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: BCDSetX64Dir. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: CcmSetInstallDirFromCmdLine. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: CcmSetPrimaryFolder. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: FindRelatedProducts. Searching for related applications ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: SmsDetectInvalidOrderColocUpgrade. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: An older version of the SMS Management Point is installed. Please upgrade the Management Point before attempting to upgrade the client. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
Installation failed with error code 1603 ccmsetup 8/18/2010 10:48:23 AM 3140 (0x0C44)
Next retry in 120 minute(s)... ccmsetup 8/18/2010 10:48:23 AM 3140 (0x0C44)
Their must be something remaining that ccmclean can't find or can' access so i ran ccmclean /mp. This did some stuff and told me the system was clean again. I reran the client setup.
Guess what
It worked !
Thanxs Kent

インストールでエラーが発生しました. adobe cs 5.5 master collection [ERROR: Install MSI payload failed with error: 1620]

Adobe creative suite 5.5 Master collection をインストールしようとしたところ、2枚目のCDをいれたところで、下記のようなエラーが出て、インストールできません。
（エラー内容が多いので、最下部に表示します）
どのようにしたら、インストールできますでしょうか？
再起動し、何度、インストールしても、同じ結果となります。
なお、パソコンの環境は以下のとおりです。
宜しくお願いします
■■■■■■■インストール環境■■■■■
Windows 7 Professional SP1
Dell Optiplex 3020 メモリ４G　　64ビットOS　　HDDの空き容量343G
他のadobe 製品はすべてアンインストールされており、フォルダも削除済み
■■■■■■エラー内容■■■■■■■■
インストールのステータス
インストールでエラーが発生しました。
システムを再起動して、再度インストールを実行してください。
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 150 error(s), 151 warning(s)
WARNING: DW017: PayloadPolicyNode.SetAction: IN payload {8F366029-8F3C-4400-BB65-7BFD1A58F200} Adobe Story 1.0.0.0 is required by {C0329E33-DEB4-48D9-B7B6-19493A6F062E} Adobe After Effects CS5.5 10.5.0.0 but isn't free. Reason: Language not supported
WARNING: DW017: PayloadPolicyNode.SetAction: IN payload {8F366029-8F3C-4400-BB65-7BFD1A58F200} Adobe Story 1.0.0.0 is required by {EFB5A1C3-ECCA-4D8A-B598-81D21DE25C34} Adobe Premiere Pro CS5.5 5.5.0.0 but isn't free. Reason: Language not supported
WARNING: DW017: PayloadPolicyNode.SetAction: IN payload {8F366029-8F3C-4400-BB65-7BFD1A58F200} Adobe Story 1.0.0.0 is required by {C0329E33-DEB4-48D9-B7B6-19493A6F062E} Adobe After Effects CS5.5 10.5.0.0 but isn't free. Reason: Language not supported
WARNING: DW017: PayloadPolicyNode.SetAction: IN payload {8F366029-8F3C-4400-BB65-7BFD1A58F200} Adobe Story 1.0.0.0 is required by {EFB5A1C3-ECCA-4D8A-B598-81D21DE25C34} Adobe Premiere Pro CS5.5 5.5.0.0 but isn't free. Reason: Language not supported
----------- Payload: {08D2E121-7F6A-43EB-97FD-629B44903403} Microsoft_VC90_CRT_x86 1.0.0.0 -----------
ERROR: Install MSI payload failed with error: 1620 - このインストールパッケージを開くことができませんでした。アプリケーションベンダーに問い合わせ、この Windows インストーラーパッケージが有効かどうかを確認してください。
MSI Error message:
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe ExtendScript Toolkit CS5.5: Install failed
ERROR: DW050: - Adobe Buzzword CS5.5: Install failed
ERROR: DW050: - GermanSpeechAnalysisModels: Install failed
ERROR: DW050: - Adobe Dreamweaver CS5.5: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Flash CS5.5_AdobeFlash11.5-ja_JPLanguagePack: Install failed
ERROR: DW050: - Microsoft_VC90_ATL_x86: Install failed
ERROR: DW050: - Adobe Linguistics CS5 x64: Install failed
ERROR: DW050: - AIR for Apple iOS support (FB): Install failed
ERROR: DW050: - Digital Publishing: Failed due to Language Pack installation failure
ERROR: DW050: - Microsoft_VC90_CRT_x86: Install failed
ERROR: DW050: - Adobe Photoshop CS5.1 Core: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Premiere Pro CS5.5 Support: Install failed
ERROR: DW050: - Microsoft_VC80_ATL_x86: Install failed
ERROR: DW050: - Adobe Photoshop CS5.1 Core_x64: Failed due to Language Pack installation failure
ERROR: DW050: - Recommended Common Fonts Installation x64: Install failed
ERROR: DW050: - Suite Shared Configuration CS5.5: Install failed
ERROR: DW050: - AdobePDFL x64 CS5: Install failed
ERROR: DW050: - Adobe Fireworks CS5.1_AdobeFireworks11.1.0ja_JPLanguagePack: Install failed
ERROR: DW050: - DynamiclinkSupport: Install failed
ERROR: DW050: - Adobe Contribute CS5.1_AdobeContribute6.1ja_JPLanguagePack: Install failed
ERROR: DW050: - Adobe OnLocation CS5.1_AdobeOnLocation5.1ja_JPLanguagePack: Install failed
ERROR: DW050: - Microsoft_VC80_MFCLOC_x86_x64: Install failed
ERROR: DW050: - IE Plugin CS5.1: Install failed
ERROR: DW050: - Adobe Illustrator CS5.1: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Encore CS5.1: Failed due to Language Pack installation failure
ERROR: DW050: - ItalianSpeechAnalysisModels: Install failed
ERROR: DW050: - Adobe XMP Panels CS5: Install failed
ERROR: DW050: - Pixel Bender Toolkit: Install failed
ERROR: DW050: - Adobe WinSoft Linguistics Plugin CS5.5: Install failed
ERROR: DW050: - Photoshop Camera Raw (64 bit)_6.3_AdobeCameraRaw6.0All-x64: Install failed
ERROR: DW050: - Adobe Hunspell Linguistics Plugin CS5.5: Install failed
ERROR: DW050: - CSXS Story Extension: Install failed
ERROR: DW050: - Adobe Encore CS5.1_AdobeEncore5.1ja_JPLanguagePack: Install failed
ERROR: DW050: - Photoshop Camera Raw: Install failed
ERROR: DW050: - SpanishSpeechAnalysisModels: Install failed
ERROR: DW050: - Adobe OnLocation CS5.1 Third Party Content: Install failed
ERROR: DW050: - Camera Profiles Installer: Install failed
ERROR: DW050: - Adobe Premiere Pro CS5.5_AdobePremierePro5.5ja_JPLanguagePack: Install failed
ERROR: DW050: - Adobe Extension Manager CS5.5: Install failed
ERROR: DW050: - Adobe XMP Panels CS5_3.1_AdobeXMPPanelsAll: Install failed
ERROR: DW050: - Adobe Flash Player 10 Plugin: Install failed
ERROR: DW050: - AdobeColorCommonSetRGB: Install failed
ERROR: DW050: - Microsoft_VC80_CRT_x86_x64: Install failed
ERROR: DW050: - AdobeColorPhotoshop CS5.5: Install failed
ERROR: DW050: - Firefox Plugin CS5.1: Install failed
ERROR: DW050: - Adobe Linguistics CS5.5: Install failed
ERROR: DW050: - Adobe Device Central CS5.5: Failed due to Language Pack installation failure
ERROR: DW050: - Office Plugin CS5.1: Install failed
ERROR: DW050: - Adobe Mini Bridge CS5.1: Install failed
ERROR: DW050: - AdobeMotionPicture CS5.5: Install failed
ERROR: DW050: - Adobe SING CS5: Install failed
ERROR: DW050: - Adobe InDesign CS5.5 Application Language Files_AdobeInDesign7xAppLang-ja_JP: Install failed
ERROR: DW050: - AdobeColorCommonSetCMYK: Install failed
ERROR: DW050: - Adobe OnLocation CS5.1: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe After Effects CS5.5 Third Party Content: Install failed
ERROR: DW050: - Adobe Audition_AdobeAudition4ja_JPLanguagePack: Install failed
ERROR: DW050: - Photoshop Camera Raw (64 bit): Install failed
ERROR: DW050: - Adobe After Effects CS5.5 Template Projects & Footage: Install failed
ERROR: DW050: - Microsoft_VC90_MFC_x86: Install failed
ERROR: DW050: - Adobe Flash Builder 4.5: Install failed
ERROR: DW050: - Adobe Media Encoder CS5.5 X64: Install failed

ありがとうございます！試してみます。
とはいえ、同じCDを使って、別のパソコンには普通にインストールできました。
なので、CDの問題ではないような気もします。（ひょっとしたら、そのパソコンのCDの読み込みがよくないのかもしれませんが）
さておき、いったん、ダウンロード版で試してみます～

[事例紹介]Install MSI payload failed with error: 110 - 指定されたデバイスまたはファイルを開けません.

このようなインストールトラブルの解決事例がありましたのでご紹介します。
【問題点】
CS5.ｘ Windows 版インストール時、「インストールに問題があります Exit Code:7」エラーが発生。
エラーサマリーには以下のエラーが含まれていました。
【エラーサマリー抜粋】
----------- Payload: {08D2E121-7F6A-43EB-97FD-629B44903403} Microsoft_VC90_CRT_x86 1.0.0.0 -----------
ERROR: 指定されたデバイスまたはファイルを開けません。
ERROR: Install MSI payload failed with error: 110 - 指定されたデバイスまたはファイルを開けません。
MSI Error message: 指定されたデバイスまたはファイルを開けません。
【解決方法】
これはMSI（Windows Installer）に関するエラーメッセージです。
Windows Installer を修復することで解決しました。
手順については以下を参照してください。
■Windows Installer の修復によるインストールトラブル対処方法（Windows）
http://kb2.adobe.com/jp/cps/890/cpsid_89088.html?sdid=JSRPP
この方法で解決しなかった、という方がいらっしゃいましたら、エラーサマリーをぜひ投稿してください。
なお、この解決方法は以下の文書にも掲載されています。
■「インストールに問題があります」エラーの対処方法（Creative Suite 5, 5.5）
http://kb2.adobe.com/jp/cps/894/cpsid_89463.html?sdid=JSRPP

The Error 1603 usually occurs due to insufficient privileges.
Try the following steps:
> Enable the hidden Admin Account on Windows 7 ( Ref : http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/ )
> Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
> Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
Reboot and try installing in the new enabled Admin user account and check.
Regards,
Rave

Install MSI payload failed with error: 1603

I had problems on upgrades got message to run Acrobat clean tool
I did it then I run new installation from Creative Cloud
failed installation gave me the following error and to contact adobe support. What I have to do?
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s)
----------- Payload: Acrobat Professional 11.0.0.0 {23D3F585-AE29-4670-8E3E-64A0EFB29240} -----------
ERROR: Impossibile installare il servizio "Adobe Acrobat Update Service" (AdobeARMservice). Assicurarsi di disporre di privilegi sufficienti per l'installazione dei servizi di sistema.
ERROR: Install MSI payload failed with error: 1603 - Errore irreversibile durante l'installazione.
MSI Error message: Impossibile installare il servizio "Adobe Acrobat Update Service" (AdobeARMservice). Assicurarsi di disporre di privilegi sufficienti per l'installazione dei servizi di sistema.
ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603

The Error 1603 usually occurs due to insufficient privileges.
Try the following steps:
> Enable the hidden Admin Account on Windows 7 ( Ref : http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/ )
> Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
> Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
Reboot and try installing in the new enabled Admin user account and check.
Regards,
Rave

ConfigMgr 2012 Agent Installation permanently failed with Error 1603

We have some clients, where the agent must be reinstalled. But it fails permanently with Error 1603. I have tried the following steps allready:
Delete the CCMSETUP and CCM Folder and start from scratch
Repair WMI by deleting root\ccm
Recreated the WMI Repository
Register all *.dll and *.mof in WBEM
Cleaned up with the ccmclean Tool
We use SCCM 2012 SP1 CU3
The error happens on Vista and Windows 7
From the logs, it looks that something went wrong with the ccmexec service, but I'm not sure. In the Eventlogs are some entries from the Search Service that the Service unexpectly stopped. But not much more.
CCMSETUP.LOG
MSI: Action 11:25:16: CcmRegisterSystemTask. Registers a System Task with WMI.
MSI: Action 11:25:17: CcmRegisterHostingConfiguration. Register configuration for Configuration Manager Client service.
MSI: Action 11:25:17: CcmSetObjectSecurity. Applying security permissions
MSI: Action 11:25:18: CcmSetupLogging. Sets component logging information in WMI.
MSI: Action 11:25:19: SmsSwDistSetCacheConfig. This custom action gets the cache configuration, disables the cache options in control panel if required by the site settings and updates the registry keys accordingly. It also configures the security for the cache
directory.
MSI: Action 11:25:19: CcmRegisterPerfCountersRollback. Rolls back any changes made by CcmRegisterPerfCounters if install fails.
MSI: Action 11:25:19: CcmRegisterPerfCounters. Registers performance counters gathered in the CcmRegisterPerfCountersInit action
MSI: Action 11:25:20: CcmRegisterComponentsRollback. In the event of a failed installation, this action rolls back the changes from CcmRegisterComponents.
MSI: Action 11:25:20: CcmRegisterComponents. Registers components passed in from CcmRegisterComponentsInit
MSI: Action 11:25:20: CcmInstallUtil. Calling InstallUtil.exe to register .net WMI provider
MSI: Action 11:25:20: SmsSetLUAAccessPermissions. >Gets permission for evelation on Vista and grants each COM object permission.
MSI: Action 11:25:20: Ngen. Calling NGEN.exe
MSI: Action 11:25:22: InstallServices. Installing new services
MSI: Action 11:25:22: WriteEnvironmentStrings. Updating environment strings
MSI: Action 11:25:22: CcmSetServiceConfig. Sets WMI ServiceRootDir and configures CCMEXEC service.
MSI: Action 11:25:22: CcmRegisterWinTaskRollback. Rolls back the changes made by CcmRegisterWinTask.
MSI: Action 11:25:22: CcmRegisterWinTask. Registers tasks with Windows Task Scheduler.
MSI: Action 11:25:22: Rollback. Rolling back action:
File C:\Windows\ccmsetup\{1AF71F68-6089-4211-ADDC-06DF40606141}\client.msi installation failed. Error text: ExitCode: 1603 Action: ErrorMessages:
Next retry in 120 minute(s)...
CLIENT.MSI.LOG
MSI (s) (CC:B4) [11:26:01:135]: Executing op: ComponentUnregister(ComponentId={F7DB5D80-2A09-4F1B-BB55-8D69AA9A94A6},ProductKey={FD794BF1-657D-43B6-B183-603277B8D6C8},BinaryType=0,)MSI
(s) (CC:B4) [11:26:01:137]: Executing op: ComponentUnregister(ComponentId={4942E0A1-7621-4D9A-93B5-AFA1A0B7FCC6},ProductKey={FD794BF1-657D-43B6-B183-603277B8D6C8},BinaryType=0,)MSI
(s) (CC:B4) [11:26:01:137]: Executing op: ActionStart(Name=CcmStopServiceRollback,Description=Calls CcmStartService. Starts the ccmexec service.,)MSI
(s) (CC:B4) [11:26:01:139]: Executing op: CustomActionRollback(Action=CcmStopServiceRollback,ActionType=3329,Source=BinaryData,Target=CcmStartService,)MSI
(s) (CC:B4) [11:26:01:159]: Creating MSIHANDLE (12483) of type 790536 for thread 6068MSI
(s) (CC:64) [11:26:01:159]: Invoking remote custom action. DLL: C:\Windows\Installer\MSICFD.tmp, Entrypoint: CcmStartServiceMSI
(s) (CC!50) [11:26:01:221]: Creating MSIHANDLE (12484) of type 790531 for thread 5712MSI
(s) (CC!50) [11:26:01:222]: Closing MSIHANDLE (12484) of type 790531 for thread 5712MSI
(s) (CC!50) [11:26:01:222]: Creating MSIHANDLE (12485) of type 790531 for thread 5712[11:26:01]
WARNING: Failed to delete setup in progress time-stamp with error 0x80070002MSI (s) (CC!50)
[11:26:01:222]: Closing MSIHANDLE (12485) of type 790531 for thread 5712MSI (s) (CC:64)
[11:26:01:223]: Closing MSIHANDLE (12483) of type 790536 for thread 6068MSI (s) (CC:B4)
[11:26:01:223]: Executing op: End(Checksum=0,ProgressTotalHDWord=0,ProgressTotalLDWord=0)MSI
(s) (CC:B4) [11:26:01:223]: Error in rollback skipped. Return: 5MSI
(s) (CC:B4) [11:26:01:223]: Entering MsiProvideAssembly. AssemblyName: Microsoft.ConfigurationManager.AssetProvider.dll,Version="5.0.0.0",Culture="neutral",PublicKeyToken="31bf3856ad364e35", AppContext: , InstallMode: -4MSI
(s) (CC:B4) [11:26:01:223]: Pathbuf: 0, pcchPathBuf: 0MSI (s) (CC:B4) [11:26:01:244]:
MsiProvideAssembly is returning: 1607[11:26:01] The service 'ccmexec' is not installedMSI
(s) (CC:B4) [11:26:01:255]: No System Restore sequence number for this installation.MSI
(s) (CC:B4) [11:26:01:255]: Unlocking ServerMSI (s) (CC:B4) [11:26:01:307]: PROPERTY CHANGE:
Deleting UpdateStarted property. Its current value is '1'.Action ended 11:26:01: INSTALL.
Return value 3.Property(S): UpgradeCode = {252DA259-82CA-4177-B8D0-49C78937BA3E}Property(S):
SourceDir = C:\Windows\ccmsetup\{1AF71F68-6089-4211-ADDC-06DF40606141}\
Has anybody came around this behavior?
Kind regards Stefan Somogyi

CCMClean.exe is not supported for ConfigMgr 2012, but I guess that you know that :)
Have you tried 'ccmsetup.exe /uninstall', wait for it to complete and then install again?
Perhaps the steps taken in the last comment from this thread can help you:
http://social.technet.microsoft.com/Forums/en-US/98fadc7b-2bdd-4b46-a0cb-ba43ebd10aaf/client-reinstall-failing-on-upgraded-clients?forum=configmanagerdeployment
Regards,
Nickolaj Andersen - MCTS - www.scconfigmgr.com - @Nickolaja

Installation failed with error code 1603

Hi all,
while installing the configuration manager clients on a system manually, we came across this ERROR:
installation failed with error code 1603
Do anyone has any idea how can this be resolved. Several posts suggest its a problem related to client push installation method, but since I am installing the configuration manager clients manually, so I mush not be affected by anything related to Client Push Installation. However, be noted that client push installation is well configured on the server, there are certain computers where the client is not getting installed so we are installing the clients MANUALLY to those systems,
Any help and suggestions would be higly appreciated.
Regards,
Naveed

I have encountered the Error 1603/1602 while installing the HCKInstall\Client\Setup.exe on several machines. It appears to be generic at first, but it's not. The error code is being passed from the Service back to the MSI. It means that a service failed
to start. The key is that it happens at the very end of the installation and then does the rollback. The solution is to figure out which service failed and then remove it and the directories.
Here is what I did.
I created batch to kick off before I install the client now. It basically checks for installed HCK products and if there uninstalls them. Then checks for the state of each service and if running stops the service before attempting to remove the HCK/WLK leftovers.
Then it removes the sticky directory.
@ECHO OFF
:: Defaults...
:: Default:_HCK_Services_="DTMService,FtsSvc,WLKSvc,WTTNotification,WTTResultsRelayAgent" services.
SET _HCK_Services_=
:: Default:_Directories_="C:^\Program Files ^(x86^)^\Microsoft Driver Test Manager"
SET _Directories_=
:: Default:_DEBUG_=off, use debug_on to change
SET _DEBUG_=
:: Examples: Comma delimited lists param1=Services param2=directory param3=debug_on
:: ^<command.bat^> "DTMService,FtsSvc","C^:^\Program Files ^(x86^)^\Microsoft Driver Test Manager",c^:^\test, "debug_on"
::SetVars:
SET _HCK_Services_=%1
IF /I "%2" NEQ "" SET _Directories_=%2
:: SetDefaults:
IF /I "%3" GEQ "debug_on" SET _DEBUG_=True
IF NOT DEFINED _HCK_Services_ (
SET _HCK_Services_=DTMService,FtsSvc,WLKSvc,WTTNotification,WTTResultsRelayAgent
IF NOT DEFINED _Directories_ SET _Directories_=C:\Program Files (x86)\Microsoft Driver Test Manager
:: Clear Parans on directories
set _Directories_=%_Directories_:(x86)=replace_x86%
:: CallMainFunctions:
CALL:UninstallHCK
CALL:CheckVersion
CALL:Main "%_HCK_Services_%"
:Main
FOR %%A IN (%~1) DO (
REM Checking for Active Services ant attempting
IF DEFINED _DEBUG_ (
ECHO Checking %%A...
FOR /F "tokens=3 delims=: " %%H IN ('sc query "%%A" ^| findstr "STATE"') DO (
IF DEFINED _DEBUG_ (
ECHO Service:"%%A" Status:"%%H"
IF /I "%%H" NEQ "" (
IF DEFINED _DEBUG_ (
ECHO Service "%%A" is installed but not %%H.
) ELSE IF /I "%%H" GEQ "RUNNING" (
IF DEFINED _DEBUG_ (
ECHO. %%A %%H
ECHO Attempting to Stop %%A
SC STOP "%%A" >NUL
) ELSE IF /I "%%H" GEQ "START_PENDING" (
IF DEFINED _DEBUG_ (
ECHO. %%A %%H
REM Need to wait for it to fail before we can stop the service.
IF DEFINED _DEBUG_ (
ECHO Attempting to Stop %%A in 60 seconds...
PING.EXE 1.1.1.1 -n 1 -w 60000 >NUL
SC STOP "%%A" >NUL
) ELSE (
CALL:print Service, "%%A", Error, "Unexpected Results"
FOR /F "tokens=3 delims=: " %%H IN ('sc query "%%A" ^| findstr "STATE"') DO (
IF /I "%%H" NEQ "STOPPED" (
CALL:print Service, %%A, Failure_To_STOP, %%H
) ELSE (
CALL:print Service, %%A, State, %%H
CALL:delete_Service %%A
FOR /F "tokens=* delims=: " %%H IN ('sc query "%%A" ^| findstr "FAILED"') DO (
IF DEFINED _DEBUG_ (
ECHO Service:"%%A" is not installed.
ECHO. State:%%H
CALL:print Service, %%A, FinalState, "Not Installed"
CALL:RemoveDirectories "%_Directories_%"
GOTO:EOF
:UninstallHCK
CALL:CheckInstallation "{3BEE5E5E-8BEE-F691-4349-7B2B41FF3A59}", UninstallString
IF DEFINED _REGKEYFOUND_ MsiExec.exe /X{3BEE5E5E-8BEE-F691-4349-7B2B41FF3A59} /qb+
CALL:CheckInstallation "{6F8333B4-7DB1-E6D3-52ED-5641F8F38B76}", UninstallString
IF DEFINED _REGKEYFOUND_ MsiExec.exe /X{6F8333B4-7DB1-E6D3-52ED-5641F8F38B76} /qb+
CALL:CheckInstallation "{A329307E-3CCD-57BF-47EF-1B857D1AF08E}", UninstallString
IF DEFINED _REGKEYFOUND_ MsiExec.exe /X{A329307E-3CCD-57BF-47EF-1B857D1AF08E} /qb+
CALL:CheckInstallation "{F1213F53-D794-2021-E14E-F4BEED1BBF3B}", UninstallString
IF DEFINED _REGKEYFOUND_ MsiExec.exe /X{F1213F53-D794-2021-E14E-F4BEED1BBF3B} /qb+
GOTO:EOF
:RemoveDirectories
SET _RemoveDirectories_1_=%~1
SET _RemoveDirectories_1_=%_RemoveDirectories_1_:"=%
SET _RemoveDirectories_1_=%_RemoveDirectories_1_:'=%
FOR /f "tokens=1-8 delims=," %%A IN ("%_RemoveDirectories_1_%") DO (
IF "%%A" GEQ ":" (
CALL:RMDIR "%%A"
IF "%%B" GEQ ":" (
CALL:RMDIR "%%B"
IF "%%C" GEQ ":" (
CALL:RMDIR "%%C"
IF "%%D" GEQ ":" (
CALL:RMDIR "%%D"
IF "%%E" GEQ ":" (
CALL:RMDIR "%%F"
IF "%%G" GEQ ":" (
CALL:RMDIR "%%H"
IF "%%I" GEQ ":" (
CALL:RMDIR "%%I"
IF "%%J" GEQ ":" (
CALL:RMDIR "%%J"
exit /b 0
FOR %%A IN ('%_RemoveDirectories_1_%') DO (
ECHO.Dir=%%A
REM CALL:RMDIR '%%A'
GOTO:EOF
:RMDIR
:: GET Parans back
SET _THEDIR_=%~1
SET _DirStatus_=
set _THEDIR_=%_THEDIR_:replace_x86=(x86)%
set _THEDIR_=%_THEDIR_:"=%
set _THEDIR_=%_THEDIR_:'=%
IF NOT EXIST "%_THEDIR_%" goto endof
RMDIR "%_THEDIR_%" /S /Q
IF NOT EXIST "%_THEDIR_%" (
SET _DirStatus_=Removed
) ELSE (
SET _DirStatus_=Failed To Remove Directory
CALL:print RemoveDirectory, "%_THEDIR_%", Results, "%_DirStatus_%"
:endof
GOTO:EOF
:print
SET var_3=%~3
IF DEFINED var_3 (
ECHO ^{^[^'%~1^'^]='%~2', ^[^'%~3^'^]='%~4'^}
) ELSE (
ECHO ^{^[^'%~1^'^]='%~2'^}
GOTO:EOF
:delete_Service
sc.exe delete "%~1" >Nul
IF %ERRORLEVEL% NEQ 0 (
CALL:print Service, %~1, FinalState, "Failed To Uninstall"
) ELSE (
CALL:print Service, %~1, Current_State, Uninstalled
GOTO:EOF
:TestStr
SET _ORIGINAL_=%~2
SET STR2=%~2
SET STR3=%~3
SET STR4=%~4
REM ECHO.Str2="!STR2!"
SET STR2=!STR2:%~1=!
REM echo.STR2="!STR2!"
IF /I NOT "!STR2!" EQU "!_ORIGINAL_!" (
SET %STR3%=%STR4%
GOTO:EOF
:CheckVersion
REM Check Windows Version and sets variable for _Version_ and _OSType_
REM Enhancement will be to install dependencies required for HCK
SET _VERSION_=
SET _OSType_=
SETLOCAL ENABLEEXTENSIONS ENABLEDELAYEDEXPANSION
FOR /F "usebackq delims=" %%i IN (`VER`) DO (
SET _VERSION_=%%i
SET _VERSION_=!_VERSION_:[=!
SET _VERSION_=!_VERSION_:]=!
REM CALL:TestStr "6.1", "!_VERSION_!", _OSType_, Windows_7_2008R2
CALL:TestStr "5.0", "!_VERSION_!", _OSType_, Windows_2000
CALL:TestStr "5.1", "!_VERSION_!", _OSType_, Windows_XP
CALL:TestStr "5.2", "!_VERSION_!", _OSType_, Windows_2003
CALL:TestStr "6.0", "!_VERSION_!", _OSType_, Windows_Vista_2008R1
CALL:TestStr "6.1", "!_VERSION_!", _OSType_, Windows_7_2008R2
CALL:TestStr "6.2", "!_VERSION_!", _OSType_, Windows_2012
CALL:print OSType, !_OSType_!
CALL:print !_Version_!
ENDLOCAL && SET _OSType_=%_OSType_% && SET _VERSION_=%_VERSION_%
GOTO:EOF
:CheckInstallation
SET _REGKEYFOUND_=
SET KEY_NAME="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\%~1"
SET VALUE_NAME=%~2
FOR /F "usebackq skip=4 tokens=1-3" %%A IN (`REG QUERY %KEY_NAME% /v %VALUE_NAME% 2^>nul`) DO (
SET ValueName=%%A
SET ValueType=%%B
SET ValueValue=%%C
IF DEFINED ValueName (
SET _REGKEYFOUND_=True
CALL:print "REGKEY", "%~2", Name, "%ValueName%"
CALL:print "REGKEY", "%~2", Value_Type, "%ValueType%"
CALL:print "REGKEY", "%~2", Value_Value, "%ValueValue%"
) else (
CALL:print "REGKEY", "%~2", "%KEY_NAME%\%VALUE_NAME%", "not found."
GOTO:EOF
:Done

Windows 7 update fails with error 8000FFFF

I've got a Windows 7 x64 installation that I've had for around three months. Everything has been fine and working up until a few weeks ago. When I run Windows Update it finds updates and allows me to select them, but when I run the install it fails with error 8000FFFF. Update used to work, but then suddenly quit.
I've dug through tons of forum and web sites regarding this specific error, but they all of their solutions do nothing to fix my problem. In frustration I decided to put in a spare hard drive and install Windows 7 from scratch. I did that and the first thing I tried to do after logging in was updates and it failed for the same reason (8000FFF).
I have the same situation with a Windows Storage Server 2008 x64 that I have as well. It has been runing for about six months or more and updates were working fine. Then update started failing for the same or some other reason about the same time. On this machine I can start the update and see it report a percentage downloading the update. It gets to about 5 or 6 percent and then fails.
Is there some possible networking issue at play in my situation? I have earlier Windows versions (XP, XP64, Svr 2003 and Svr 2003 R2) and updates work fine on those. I know those are using a different mechanism, but I do not notice any other kind of networking issues from my house to the Internet. I have not changed anything or any settings in my firewall at all. Is there some specific protocol, port or something that has to work prefectly in order for the new Windows update to work?
All of my machines are pretty much Intel based. Win7 box is a Core2Duo on an EVGA 680i motherboard. The servers are Intel Xeons with Intel motherboards, chipsets and nics.
Thanks for any advice and help

Wow, suddenly I have the same bizarre error at 11% of downloading, then error #8000FFFF.
Fix IT, registry keys and SoftwareDistribution folder cleaning, uninstalling previous updates, manual downloading of appropriate updates and attempt do install it and creating/deleting user profiles - don't work at all.
Any new ideas?
Thanks,
Win7 x64 SP1
Package KB2633873 failed to be changed to the Installed state.
Status: 0x8e5e0408.Windows update "Security Update for Windows (KB2633873)" could not be installed because of error 2388526088 "" (Command line: ""C:\Windows\system32\wusa.exe" "C:\Users\Wiewior\Downloads\Windows6.1-KB2633873-x64.msu"
Package KB2645640 failed to be changed to the Installed state. Status: 0x8e5e0408.
Windows update "Security Update for Windows (KB2645640)" could not be installed because of error 2388526088 "" (Command line: ""C:\Windows\system32\wusa.exe" "C:\Users\Wiewior\Downloads\Windows6.1-KB2645640-x64.msu"

Premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden."

premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden." Installation in German Language on WIN7 professional 64bit, Samsung SSD. What can I do to run that program?

Jurgen Freund
Premiere Elements 12 on Window 7 64 bit. What video card/graphics card does your computer use - AMD Radeon?
I have found this YouTube video on the subject of Error 126 with details for resolving the problem.
How to fix the ERROR 126 when you open OpenGL programs - YouTube
The link was contributed in an old 2013 thread here by the ID danneomarre (see post 6 of the following thread)
LoadLibrary failed with error 126: cant find the required
Please let us know if that worked for you.
Thank you.
ATR
Add On...When all is OK and working, please update 12 to 12.1 Update using an opened project's Help Menu/Update.

Windows Installer (MSI 5.0) fails with ERROR 1939 during "MsiConfigureServices" action

Similar Messages

Maybe you are looking for