Windows Integrity Level for Application set at startup

Hi,
Yesterday I found a problem in my application that it had not have the same integrity level as Outlook. Therefore someone from microsoft adviced me to look at the integrity level and make them both the same. I managed to find a CommandPrompt command for
setting the integrity level, but what I really want is setting the integrity level at startup of my application.
How can I set the integrity level of my application to the desired level using C#?
Best regards,
Jouke

Hello Jouke,
I am not a Microsoft employee, just a regular developer as you are.
Anyway, the forum is for Outlook related dev questions. I'd suggest asking common C# programming questions on the Visual C# forum instead.
I believe you can use the
/runas command line argument.

Similar Messages

Set Windows Integrity Level for Application at startup

Hi,
Yesterday I found a problem in my application that it had not have the same integrity level as Outlook. Therefore someone from microsoft adviced me to look at the integrity level and make them both the same. I managed to find a CommandPrompt command for
setting the integrity level, but what I really want is setting the integrity level at startup of my application.
How can I set the integrity level of my application to the desired level using C#?
Best regards,
Jouke

Hello Jouke,
I am not a Microsoft employee, just a regular developer as you are.
Anyway, the forum is for Outlook related dev questions. I'd suggest asking common C# programming questions on the Visual C# forum instead.
I believe you can use the
/runas command line argument.

OC4J: log level for application deployment?

Hi,
i have a application that can be deploy to co4j in window xp but not in AIX, and
the error message print is not so helpful.
i want to get more detail information about the error. (print more detail debug message)
Is there something like -Dxxx=debug to set the log level for application deployment?
thank you.

Most likely application is trying to display a prompt, run your app in full visibility mode and see if it goes through.
Sometimes, when app is receiving incorrect license key it will also hang like that. The only way it's going to fail is once you run out of time, which by default is 120 minutes I think.
Other times, app needs mapped drive etc, there might be many more reasons.
SCCM logs will show you what is received from app. If nothing is received, then logs are useless and you need to use application level logging or take a look at windows logs (system and application) - they might be useful too.
As a last resort, you can use psexec and run installer as system account to mimic what SCCM is using and see if app installs or also takes its sweet time.

File associations in Windows 8.1 for applications on a network location

Hi,
From Windows 7 to Windows 8 it has been done alot of changes regarding file file assocations. It seem that the main reason was security and was "patched" by having Windows read the hash for the applications instead of where the application was
located.
but there seem to be some major hicups and there is limited info on the web covering these issues.
First issue: when running: Dism /Online /Export-DefaultAppAssociations:\\Server\Share\AppAssoc.xml and then creating a GPO configuration pointing to
thi XML file. With this feature only common file extensions is supported and when users are changing to another computer, these settings is not possible to syncronize using roaming profiles.
Second issue: In the appassoc.xml file applications must be either appid(metro app) or common application on local harddrive to be registered and not a .EXE
file on a network location.
It seems a little strange if this is the case and if there is no other options for administratos to set file associations in more flexible ways. Does anyone have some more info on
this topic other than these link:
https://technet.microsoft.com/en-us/library/hh825038.aspx?f=255&MSPPError=-2147217396
http://blogs.technet.com/b/mrmlcgn/archive/2013/02/26/windows-8-associate-a-file-type-or-protocol-with-a-specific-app-using-a-gpo-e-g-default-mail-client-for-mailto-protocol.aspx
https://keithga.wordpress.com/2013/11/13/file-associations-in-windows-8/

Hi Primeid,
You could use Group policy for file associations or you could deploy the xml file during image deployment. However as you mentioned that the file associations only applies to common application on local hard drive or metro app.
http://blogs.technet.com/b/mniehaus/archive/2014/01/10/configuring-file-associations-in-windows-8-1.aspx
http://blogs.technet.com/b/mrmlcgn/archive/2013/02/26/windows-8-associate-a-file-type-or-protocol-with-a-specific-app-using-a-gpo-e-g-default-mail-client-for-mailto-protocol.aspx
We understand your confusion about this, but we hope you understand that using network location for file association deployment is highly insecure and it is out of our recommendation since the content in that network location could be changed without any
notification or permissions constraint.
Thanks for your understanding.
Regards
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Load application setting on startup

Hi,
I want to load some parameters from ini file on application startup = click on exe file and load setting on FormCreate event in classic RAD software.
How can I do this in Labview?
Thank you.

When the executable is first run, you just read in the ini file. No event needed.
Edit: To clarify, LabVIEW code runs like a flowchart, so at the beginning of your application's "flowchart" you put your ReadFromConfig code.

Windows-integration patch available?

All,
Now that the release of 9.0.4 (10g) is being pushed back until the first of the year, does anyone know if the Windows-integration functionality for R2 is available as a patch?
TIA,
Doug

Am working an Oracle Forms and Oracle Reports (10g) WEB applications for an Air Force customer. They are wanting to use Smart Cards (CAC) to log onto their PCs and do not want to have to enter logon and passsword to enter my Oracle WEB appliaction.
Has anyone or does anyone know of a government customer that has an Oracle forms and reports application that does not require a login and password, but uses the CAC card information to connect? If so can you please provide name of organization and contact information. thanks [email protected]

I can't set shortcut for „Application windows"

System Preferences → Exposé & Spaces → Exposé
I can’t set shortcut for „Application windows” — first column with Fn key is OK, but the second column with mouse button doesn’t work. If I set „secondary mouse button” for „application windows”, it doesn’t work. But if I set „secondary mouse button” to „All windows”, it works! All mouse shortcuts for „All windows” or „Show desktop” work, but no mouse shortcut for „Application windows” work . The same with „Mouse button 3” and other buttons.
Can you help me, please?

Do you see the iTunes Library icon in the window? Click on it and the use the scroll bar to get to the tracks you want.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.≤br>
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Set Logging level for my application

I've got an web-based application (ADF/EJB) and I'm trying to configure the logging level.
I'm using the Java Logging API and no matter what I change, short of hardcoding a call in to set the global logging level, I can't alter what level it is using. I've tried changing in the WebLogic console and all that does is change the logging level for WebLogic. I've tried adding properties files but they don't seem to be read.
Any Ideas?

Hey Mark,
I have no idea if this will help, but I was wanting to print out only my DML operations on commit and I got this post on my thread.
You could probably do this with -Djbo.debugoutput=adflogger and then fuss with the logging configuration, or perhaps by turning on JDBC loggingDouble-click your View Controller project-> Run/Debug/Profile -> Edit ,and then type the -Djbo.debugoutput=adflogger into your Java Options, but I don't know anything after that.
Good luck.
Will

When I open my iMac, I get this message - Your Mac OS X startup disk has no more space available for application memory. ???????

When I open my iMac, I get the following message : Your Mac OS X startup disk has no more space available for application memory. Then it says to quit applications not in usw and to close windows and remove files from startup disk. It lists Safari, email and Finder. I force a quit on all applications yet the same message comes up every time I open an application. What do I do to get rid of this once and for all? The computer is not even two years old and is only used for email and Safari. Help will be greatly appreciated,

The message has nothing to do with low disk space.
There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
A long-running process with a memory leak (a kind of bug)
Not enough memory for your usage pattern
Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
These instructions are for OS X 10.9 ("Mavericks.") The procedure may be slightly different for earlier versions of OS X.
When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, remove the software. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
"Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details.

ITunes for Windows, QuickTime, and Apple Application Support

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
*The relationship between iTunes for Windows and QuickTime for Windows*
Conceptually, you don't go too far wrong thinking of iTunes for Windows as a gigantic QuickTime for Windows plug-in. QuickTime for Windows provides the audio and video playback capabilities for iTunes for Windows, the codecs iTunes for Windows uses for importing and burning CDs, and so forth.
So, under normal circumstances, if you uninstall your QuickTime for Windows your iTunes for Windows will no longer launch. The exception is if you install a different application such as QuickTime Alternaltive, which also provides QuickTime playback capabilities. However, most such applications (QuickTime Alternative being a good example) are themselves built from actual QuickTime program files. So there's really no getting away from the requirement to have QuickTime for Windows componentry installed on your computer in order to get your iTunes for Windows to launch and run.
In addition to needing some QuickTime for Windows installed on the computer for iTunes for Windows, a given iTunes for Windows version will require *at mininum a particular version* of QuickTime for Windows to be installed on the computer in order for that iTunes for Windows version to run. For example, iTunes for Windows 5.0.0.35 requires at least a release version of QuickTime for Windows 7.0.2 to run correctly, iTunes for Windows 6.0.0.18 requires at least a QuickTime for Windows 7.0.3, and so on. The same applies for solutions involving other programs like QuickTime Alternative. An iTunes for Windows 6.0.0.18 would require an installed version of QuickTime Alternative to made from (at least) QuickTime for Windows 7.0.3 componentry in order for iTunes to run.
The most straightforward way to go about getting your iTunes for Windows launching again after you've uninstalled your QuickTime for Windows is simply to reinstall QuickTime for Windows. You can get the latest version of QuickTime for Windows XP, Windows Vista and Windows 7 from the following download page at the Apple website. (Use the download link that doesn't mention iTunes.)
[Latest QuickTime for Windows version|http://www.apple.com/quicktime/download>
*The relationship between iTunes and Apple Application Support*
iTunes for Windows uses a number of the same program files as other Apple software for Windows (most notably, QuickTime for Windows and Safari for Windows). Starting with iTunes for Windows version 9.0.0, QuickTime for Windows version 7.6.4, and Safari for Windows 4.0.4, program files common to more than one of the programs have been stored in a single location: "Apple Application Support".
So, if you uninstall your Apple Application Support (using the Add or Remove programs control panel in Windows XP, or using Programs and Features in Windows Vista or Windows 7), your iTunes for Windows 9.0.0 (or higher version) will no longer launch ... because several essential program files for iTunes for Windows 9.0.0 (or higher version) will have been uninstalled.
At the time of writing this user tip, Apple Application Support is not available as a "standalone" download from Apple. It is only available as part of the installer bundles for the most recent versions of iTunes for Windows, Safari for Windows and QuickTime for Windows. So if you have uninstalled your Apple Application Support and your iTunes for Windows 9.0.0 (or higher version) is no longer launching, the most straightforward way of getting your iTunes for Windows launching again is to uninstall your existing version of iTunes for Windows and reinstall the latest version of iTunes for Windows. (The iTunes reinstall should also reinstall your Apple Application Support.)
[Latest iTunes for Windows version|http://www.apple.com/itunes/download>
If, however, you've uninstalled both your Apple Application Support and your QuickTime for Windows, the most straightforward way of getting them both reinstalled is to download the latest QuickTime for Windows installer from the Apple website. (Use the download link that doesn't mention iTunes.)
[Latest QuickTime for Windows version|http://www.apple.com/quicktime/download>
This is the 1st version of this tip. It was submitted on March 7, 2010 by b noir.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

New MacAir error states "your Mac OSX startup disk has no more space available for application memory" All I have added is MS Office

My new Mac Air states that my " Mac OSX startup disk has no more space available for application memory" and wants to force quit Safari. I have only added MS Office to the computer and Carbonite. Any suggestions?

Select the icon of your startup volume ("Macintosh HD," unless you renamed it) in the Finder and open the Info window. What value is shown for Available (space)?

Want to set a default zoom level for safari? Here's how you do it.

If you like to set a default zoom level for safari so you don't have to hit Ctrl+ (or Ctrl-) every time you start Safari and open a new tab, here's how you can do that. This should work on Safari for mac, too:
1) create a file named defaultzoom.css (or any name you like, just make sure it has a css extension.)
2) copy and paste in the following:
body {
zoom: 130%;
change 130 to whatever number suits you. >100 means zoom in, <100 means zoom out. Don't forget the % percent sign!
3) in safari, go to Preferences > Advanced. Under style sheet, select Other... and point to the file you created.
4) you may need to restart safari for the change to take effect.
Voila. Hope that helps someone.

Yes you are right!
This CSS zooming is a crude hack. I think it basically treats a web page like a pdf document where you just enlarges everything.
When you zoom manually, safari does a smarter sort of zoom where it enlarges but tries to keep widths of the elements the same size, reflowing text where needed and scrolling only when necessary.
If the web page has a fixed size that is smaller than your browser window, like this forum, css zoom works ok. But with a page like gmail, which has no width constraint, you get into trouble.
Hmm, wait, I just checked out wiki, which also uses up all available screen real estate, but does NOT have this problem.
Notice in gmail, even if you zoom way out below what should be 100%, the login is still off the screen. The font gets real small but the width of the page stays the same. The css zoom basically "sticks" and isn't completely reversible.
Bottom line: you have to decide which is more annoying: having to hit Ctrl+ for every tab you open, or running into some problematic pages.
On Windows, I use autohotkey (a kdb and mouse macro scripting program) to switch off the CSS on the fly when I need to. I think Mac has similar capability built in, right? If I were really clever, I guess I could program autohotkey to send a few ctrl+ whenever it detects a new window or tab in safari, but I'm not there yet.
Bottom bottom line: Apple needs to add this feature. It's a pretty basic accessibility feature. Doesn't Apple have like an accessibility guru/advocate?

How to set transaction isolation level for a method in a Local Interface

 By reference at:
 http://e-docs.bea.com/wls/docs61/ejb/reference.html#1071267,
 the value for method-intf can only be "Remote" or "Home".
 My question is--
 How to set transaction isolation level for a method inside a Local Interface or
 Local_Home Interface?
 Thanks.
 Xing


I'd try 6.1SP2. I'm pretty sure this works now.
 -- Rob
 Xing wrote:
 > I tried "Local", but got an error when deploying the EJB jar, saying that only
 > "Remote" or "Home" is allowed.
 >
 > Any idea?
 >
 > Xing
 >
 > Rob Woollen <[email protected]> wrote:
 > >
 > >
 > >Use LocalHome or Local.
 > >
 > >-- Rob
 > >
 > >Xing wrote:
 > >
 > >> By reference at:
 > >> http://e-docs.bea.com/wls/docs61/ejb/reference.html#1071267,
 > >> the value for method-intf can only be "Remote" or "Home".
 > >>
 > >> My question is--
 > >>
 > >> How to set transaction isolation level for a method inside a Local
 > >Interface or
 > >> Local_Home Interface?
 > >>
 > >> Thanks.
 > >>
 > >> Xing
 > >
 > >--
 > >
 > >----------------------------------------------------------------------
 > >
 > >AVAILABLE NOW!: Building J2EE Applications & BEA WebLogic Server
 > >
 > >by Michael Girdley, Rob Woollen, and Sandra Emerson
 > >
 > >http://learnWebLogic.com
 > >
 > >
 > >
 > >
 > ><!doctype html public "-//w3c//dtd html 4.0 transitional//en">
 > ><html>
 > >Use LocalHome or Local.
 > >-- Rob
 > >Xing wrote:
 > ><blockquote TYPE=CITE>By reference at:
 > > http://e-docs.bea.com/wls/docs61/ejb/reference.html#1071267,
 > > the value for method-intf can only be "Remote" or "Home".
 > >My question is--
 > >How to set transaction isolation level for a method inside a Local
 > >Interface
 > >or
 > > Local_Home Interface?
 > >Thanks.
 > >Xing</blockquote>
 > >
 > ><pre>--
 > >
 > >----------------------------------------------------------------------
 > >
 > >AVAILABLE NOW!: Building J2EE Applications & BEA WebLogic Server
 > >
 > >by Michael Girdley, Rob Woollen, and Sandra Emerson
 > >
 > >http://learnWebLogic.com</pre>
 > > </html>
 > >
 > >
 AVAILABLE NOW!: Building J2EE Applications & BEA WebLogic Server
 by Michael Girdley, Rob Woollen, and Sandra Emerson
 http://learnWebLogic.com
 [att1.html]

Using AIA to jump start application integration platform for custom apps

Has anyone used AIA Foundation Packs as the core application integration framework for integrating custom developed applications?
My company has Oracle / PSft ERP applications, but I'm wondering if there is value in exploring the Oracle AIA Foundation Packs to help standardize / implement application and data integration solutions between our custom applications. Most of our application architecture portfolio are custom apps on legacy Oracle Forms platform and Oracle ADF; Oracle Java rich client (EJB / Swing) applications.
R

Hi R,
There are many AIA customers doing exactly the same. The value of standardizing the complete integration portfolio is very apparent and AIA Foundation pack provides you complete set of tools to achieve it.
Regards
Rohit

Msg states: "your Mac os x startup disk has no more space available for application memory...Removing files from startup disk may help." yet, I have 299.11GB of 319.73GB available. Why is msg received?

The full message reads as, "
Force Quit Applications
Your Mac OS X startup disk has no more space available for application memory.
To avoid problems with your computer, quit any applications you are not using. Closing windows and removing files from your startup disk will also help."
Currently I have:
Capacity: 319.73GB ; Available: 299.11GB ; Used: 20.62GB
Why am I receiving this message and being forced to force quit items? Both times the message has been received, Safari was open (frozen) while checking yahoo! mail.
I received my MacBook Pro as a gift less than a month ago and I have only saved 20 pictures within iPhoto and installed Skype and Vuze...no other modifications from default have been made.
Any idea?

The full message reads as, "
Force Quit Applications
Your Mac OS X startup disk has no more space available for application memory.
To avoid problems with your computer, quit any applications you are not using. Closing windows and removing files from your startup disk will also help."
Currently I have:
Capacity: 319.73GB ; Available: 299.11GB ; Used: 20.62GB
Why am I receiving this message and being forced to force quit items? Both times the message has been received, Safari was open (frozen) while checking yahoo! mail.
I received my MacBook Pro as a gift less than a month ago and I have only saved 20 pictures within iPhoto and installed Skype and Vuze...no other modifications from default have been made.
Any idea?

Windows Integrity Level for Application set at startup

Similar Messages

Maybe you are looking for