Windows messages through the JNI

My Windows DLL is loaded and called from the JNI. My DLL creates a window for video preview. When running under Java, the window does not get messages passed to it. The mouse cursor becomes an hourglass when passing over this window.
Question: how can I get Java to pass the Windows event messages to my DLL??

JNI blocks the windows message pump. Nothing you can do about that, sorry :-(
btw I've the same problem, looking for a solution (deprecating the messagepump and dispatching messages myself)

Similar Messages

How to deploy connection (Mac OS X Yosemite to Windows RDS) through the RD Gateway with Two Factor authentication (Safenet OTP) on Session host?

Good day!
Could you please help me? How to deploy connection (Mac OS X Yosemite to Windows RDS) through the RD Gateway with Two Factor authentication on Session host? How to open an authentication dialog that is the same as in Windows when logging on to network resources
in Windows (Windows Security)?
Our test environment: We have one RDS 2012 R2 server (all roles in one) and one session host in collection. On the session host installed Safenet Network Logon and it under GPO which disable all authentication, only OTP.

Hi Sir,
It seems that you are going to integrate 3rd party product into AD for authentication .
I would suggest you to contact the vendor of Safenet for this deployment scenario :
http://www.safenet-inc.com/multi-factor-authentication/authentication-management/safenet-authentication-manager-express-samx/
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Please tell me you can get access to the messages through the sdk? Using the protocol Bluetooth (MAP)

please tell me you can get access to the messages through the sdk? Using the protocol Bluetooth (MAP)

If you're referring to iMessage, you can't.
That data is off limits.

Messaging through the wireless network

I have a PowerMac G5, two MacBooks, and a PC based laptop all on my Airport Extreme wireless network. They are fully connected, sharing internet, a central printer, and I can move files between my computers. Is it possible to send some type of instant message, or any signal to other computers while they are on the network? All Macs are using OS X 10.4.6. We can message using various internet programs, but I would perfer to message through OS X if possible.
Bill

As Duane mentions, you can use iChat. iChat features the Bonjour chat client that will allow you to chat on your own network.
You can also find a Bonjour chat client for windows here: http://xurble.org/projects/iChatMiranda
I hope this is what you were looking for!

Connecting to a windows network through the terminal?

Hi,
I'm at school with my archbox and want to connect to the samba server through the terminal. I usually use GNOME on a regular basis, but I find it fun to use the terminal for things. Please tell me how I can do this.

Yeah make sure smbclient is installed and use something like:
sudo mount -t cifs //windowsbox/sharename localmountpoint -o iocharset=utf8
For "windowsbox" you might have to use the ip address unless its name resolves somehow (like in your hosts file).

How can I print with a Windows computer through the AirPort?

Basically, I'm a college student in a dorm room with a wireless HP printer. I have a MacBook Pro 15-inch with Snow Leopard and my roommate has an Asus Eee PC with Windows XP. I use an Apple AirPort Express router and print through it with my computer wirelessly. Is there any way my roommate can print wirelessly from his computer? So far, I haven't figured out how to set it up and he just uses my computer whenever he needs to print something.

Since the printer has its own wireless built-in, as opposed to it connecting via USB to the Airport Express, then there shouldn't be an issue for the Asus to connect to the printer, providing it can connect to the Express also via wireless.
Unless someone here knows otherwise, I suggest you check the HP web site in case there is an additional utility required for XP to add a network wireless printer.
Usually, a network printer is added by selecting Local Printer, rather than Network as this is looking for server shared printers, and then you create a New Port and select Standard TCP/IP for the port type.
Pahu

Alert message through the sdk.

hi.
plz have a look on Attached image..
i want to send one alert to the particular user.
i am able to send it..
but here i have a small requirement.
Normally alert messages are Working on queries..
suppose
select docentery from ordr where docsttus='open''..
docentry will be popup
if i select the docentry sales order will be pop up.
the below code i am able to send it...
but
i want to attach the below query....just like a normal alert message
select docentery from ordr where docsttus='open''..
can i do it...
Dim msg As SAPbobsCOM.Messages = Nothing
                msg = ocompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oMessages)
                Dim lretvel, errcode As Long
                Dim errmsg As String
                Dim orec As SAPbobsCOM.Recordset
                orec = ocompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
                orec.DoQuery(" select U_apmuc from [@TI_BITEMASAPR1]")
                For i As Integer = 1 To orec.RecordCount
                    Dim ousercode As String = orec.Fields.Item(0).Value
                    msg.MessageText = "Mess"
                    msg.Subject = "subj"
                    msg.Recipients.Add()
                    msg.Recipients.SetCurrentLine(0)
                    msg.Recipients.UserCode = ousercode
                    msg.Recipients.NameTo = ousercode
                    msg.Recipients.SendInternal = SAPbobsCOM.BoYesNoEnum.tYES
                    msg.Add()
                    orec.MoveNext()
                Next
                If lretvel <> 0 Then
                    ocompany.GetLastError(errcode, errmsg)
                    MessageBox.Show(errcode.ToString + " :: " + errmsg)
                    ' Else
                    ' MessageBox.Show("Success")

Hi
In this case you can't use the SAPbobsCOM.Messages object to send the message. You have to use the MessageService where you can define columns and add rows.
Check the following code:
Dim msgServ As SAPbobsCOM.MessagesService
Dim oMessage As SAPbobsCOM.Message
Dim DataColumn As SAPbobsCOM.MessageDataColumn
Dim oRecordset As SAPbobsCOM.Recordset
Try
oRecordset = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
msgServ = oCompany.GetCompanyService.GetBusinessService(SAPbobsCOM.ServiceTypes.MessagesService)
oMessage = msgServ.GetDataInterface(SAPbobsCOM.MessagesServiceDataInterfaces.msdiMessage)
oMessage.Subject = "subj"
oMessage.Text = "Mess"
oMessage.Priority = SAPbobsCOM.BoMsgPriorities.pr_Normal
oRecordset.DoQuery("select U_apmuc from [@TI_BITEMASAPR1]")
If oRecordset.RecordCount > 0 Then
       oRecordset.MoveFirst()
       For ii As Integer = 0 To oRecordset.RecordCount - 1
            With oMessage.RecipientCollection.Add()
                 .SendInternal = SAPbobsCOM.BoYesNoEnum.tYES
                 .UserCode = CStr(oRecordset.Fields.Item(0).Value)
                 .UserType = SAPbobsCOM.BoMsgRcpTypes.rt_InternalUser
            End With
               oRecordset.MoveNext()
       Next
       DataColumn = oMessage.MessageDataColumns.Add
       DataColumn.ColumnName = "Order No."
       DataColumn.Link = SAPbobsCOM.BoYesNoEnum.tYES
       oRecordset.DoQuery("SELECT DocEntry, ObjType, DocNum FROM ORDR WHERE DocStatus = N'O'")
       If oRecordset.RecordCount > 0 Then
            oRecordset.MoveFirst()
            For ii As Integer = 0 To oRecordset.RecordCount - 1
                 With DataColumn.MessageDataLines.Add
                      .Value = oRecordset.Fields.Item("DocNum").Value
                      .Object = oRecordset.Fields.Item("ObjType").Value
                      .ObjectKey = oRecordset.Fields.Item("DocEntry").Value
                 End With
                         oRecordset.MoveNext()
            Next
            msgServ.SendMessage(oMessage)
       End If
     End If
Catch ex As Exception
     MsgBox(ex.Message)
End Try
Regards,
Csaba

Firefox will not open, a pop up window message says: The application or dll mozilla firefox xul.dll is not a valid windows image. I am using XP and firefox use to work perfectly

Firefox will not open a pop up window says "the application or dll c:program files mozilla firefox xul. dll is not a valid windows range"
== This happened ==
Every time Firefox opened
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB0.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C)

I resolved the problem. I went to CNet and re-downloaded the upgrade. It proceeded as intended and the upgrade is installed and running with no loss of plug-ins, bookmarks, etc.

TS3991 How can I send messages through the messages icon on my Ipad 3?

I see that there is a messages icon ( for short message service) on my Ipad-3 however I don't seem to be able to use it the way I do it on my Iphone.
Is there a possibility to use this icon on the Ipad as well?

The Messages icon on your iPad is not for "short message service" (more commonly known as SMS) - it is for Apple's iMessage service.
See https://www.apple.com/ios/messages/ for how to set it up.

I set up my email through settings, now I can't view my messages through the mail app

I am a new user to an iphone. How can I use the mail shortcut app on the home screen and view my messages

is this how you set up your mail
IOS setting up mail account http://support.apple.com/kb/ht4810

Safari of my Macbook (on WiFi) suddenly fails to connect to the Internet. A popup window message says another device on the network is using my computer's IP address.

But then there was still no Internet access even after I have disconnected all other home computers (a total of four including the Macbook and one iMac desktop. For simplicity, I shall categorically called them Mac hereafter unless otherwise specified. The Macs are operating on WiFi.).
The window message recommends changing the IP of either the Macs or the other device. The latter of course does not apply because I don't think the other device is one of my computers.
My questions:
(1) Why did that happen suddenly since the Mac and other computers on the WiFi was working fine in the morning (as well as days before) and then all of a sudden an unknown device is using my computer's IP? As far as I (we) can remember, we did not do any thing unusual this morning nor had we downloaded any special programs.
(2) How do I change the IP since it requires Internet acess to do it and since I can't access the Internet on the Mac?
(3) I am almost sure the problem is not caused by the Internet service because when I connected the Ethernet cable from the DSL modem to an old Windows PC, I got Internet via Internet Explorer. [I am actually sending out this message via IE on my PC.] However, when I cennected the Ethernet line from the modem to a WiFi router (Airport Extreme) and then connect the router and the old PC, I did not get Internet on either the Mac nor the PC. Similarly, there was no Internet on both Mac and PC If I connect Ethernet only between the modem and the router but not between PC and router. So, the question is whether a third unknown party has gotten hold of my Mac IP address and is trying to break into the Mac? Can it steal my personal info?
(4) How can I repair the Mac now and prevent future recurrences? Is changing the IP address the way to do it? (But like I said before I had tried but could not change the IP because I did not have Internet access on the Mac. Is there an alternative method?)
(5) I wonder if a computer's IP address remains constant if you don't change it. The reason I am asking this question is because the aforesaid window message on the Macbook--not sure about the iMac--shows a different IP address--a few numerical digits were changed--almost every time it pops up following every failure trial of mine to access the Internet. Was the Macbook trying to change the IP for me or was there some thing not right?

Re: Another device on the network is using your computer's IP address.
This message/problem was occuring intermittently for me in a household with two MacBooks accessing one Airport extreme. Rebooting the modem and router would only temporarily fix the issue for me, so I spoke with a friend who works for Apple and it seems that the Airport Extreme settings were at the root of our particular issue.
The router(Airport Extreme) recieves only one IP address from the modem and in order to allow it to share the IP address with two computers at once, the solution in my case was through:
Applications>Utilities>Airport Utility>Manual Setup>Internet
under Internet Connection- Select "share a public IP address"
under NAT, check the box for "enable NAT Port Mapping Protocol"
(this will allow the sharing of one public IP address with multiple devices)
if this is a new setting, then click "Update" and the Airport Extreme should reboot itself with new settings applied.
When all else is working properly, this is a satisfactory solution in my case.

Error message through proxy on 10.4x machines...works on 10.3, 10.5 and XP

Our school system is using Lightspeed Total Traffic Control v. 7. Since we started using this system, we can no longer connect to the iTunes store to purchase online books. The weird thing is that this affects only Macs running OS 10.4. If we try to purchase things on machines running 10.3 or 10.5 (or even Windows XP) through the same proxy, it works fine. If we try it on a 10.4 machine, when we attempt to log in we receive the message: "We could not complete your iTunes Store request. An unknown error occurred (-9844)." The log in will work on that same machine if the proxy is disabled. On the district level, we've put in all kinds of exceptions for the proxy to allow the iTunes store (phobos.apple.com, ax.phobos.apple.com.edgesuite.net, metrics.apple.com, itunes.com, a1.phobos.apple.com, wsidecar.apple.com, store.apple.com, and a whole host of others, along with corresponding IP addresses.) It seems to be tied only to the 10.4 operating system. We're also getting errors when we attempt to sync our address books in .mac. It has to be the way that 10.4 is handling things because it's working on all other operating systems, but any system running 10.4 is blocked. Unfortunately, most of the Macs in our system will be running 10.4x. This is making it really difficult to purchase online books through iTunes to be used on all the iPods we have!

I think I have the same problem. I recently got a macbook pro. I'm at uni and it is connected through the uni. I used to have a laptop with windows with an itunes account which worked fine.
I can connect to the itunes store BUT I can't authorize my new macbook to play the songs I have previously paid for. And I can't sign in so that I can add stuff to my shopping cart.
Its really annoying. I have sent a few emails to apple and they said that they can'y find my account which is stupid because right before I sent the emails I changed my password with the same account name.
Its so frustrating because I can't play half of my music because I can't authorize it.

Create support desk message through "Help"

Dear friends,
I am creating support desk message in my Sol Man system through "Help" menu. At that time, system automatically calling transaction type "SLF1".
Now i have created the new transaction type "ZZSL" by copying from SLF1.
Now i want the system to call the new transaction type "ZZSL", when i create a support ticket through "Help".
How to enable this?
Please guide me on this.
Regadrs
Senthil

Dear Anand,
Thank you for the reply. But this one will work, if i create a support desk message through t.code NOTIF_CREATE.
But i am NOT creating the support desk message through the transaction NOTIF_CREATE.
I think you are of aware of creating the support desk message through "Help" menu.
At that time i want to link transaction type "ZZSL".
or..can u give u mail ID ..i will send the screen shots
Senthil

Printing from windows Bonjour through imac 10.4.8 to HP6200

I have a Windows XP PC with Bonjour. I have an HP Officejet 6200 hooked to new intel/imac via USB running OSX 10.4.8 I can print from imac no problem. I installed Bonjour on windows xp PC. Bonjour configures print que no problem and I see the printers in the printers and faxes window on XP. I print and nothing happens. The app sends it into the clouds - you dont see it in any of the print queues?? please help
I also tried to print from the imac to the HP when it was connected to the windows XP machine but only garbledy gook came out. I understand that is some sort of GIMP thing thats why I am trying to print from the Windows PC through the iMAC

Closely related problems - driver.
Print queues on the Mac expect to receive postscript as input. Change driver on the PC to a color postscript driver, like Apple Color LaserWriter xx.

Handling windows messages within an event structure

Hello all.
I've got an event driven VI which makes use of an event structure. I'd like my VI to be able to respond to some custom windows messages (i.e. WM_USER) sent from a separate process that listens on a telemetry card (sends a message when it receives data).
I have tried modifying the Windows Messaging Queue VI example provided by NI so that the VI will process windows messages during the timeout event in the event structure but this doesn't seem to work.
Any suggestions?
If labview events and windows messages don't mix then I guess I could do away with the event structure and go entirely with windows messages. This could be done by defining some custom messages that replace the labview events (e.g., W
M_STOPBUTTON_PRESSED = stop button, value changed event) and have the VI post these messages using PostMessage from User32.DLL and then catch these messages in the same manner as the NI Windows Messaging Queue VI.
My preference is to make use of the event structure if I can because its more inline with the labview methodology.
This is really interprocess communication question so if there are other ways of achieving the same result (sockets, named pipes, shared memory?) I'm keen to listen.
cheers,
Novak.

These 'sockets' sound interesting. What exactly are they? Could you direct
me to an example?
Thanks
Denis
"VI Guy" wrote in message
news:[email protected]..
> LabVIEW Events and Windows messages don't mix. To implement as such,
> you would have to do as you describe.
>
> Using sockets as an inter process communication scheme works great.
> And on a single machine, they dont leave the computer (i.e. no round
> trip on the network). Also, its cross platform compatable, not to
> mention it adds the possibility of being able to seperate your
> processes across several machines. Add to this that sockets are as
> easy to code as serial communication (with the benefit of "sleeping"
> waits instead
of "serial polling") and you get a solution fits many
> applications and needs.
>
> Get the idea I am sold on sockets?
>
> Good luck.

Windows messages through the JNI

Similar Messages

Maybe you are looking for