Windows on Parallel, on new MacbookPro not working after migration assistant

After I did migration assistant from my old macbook pro to my new macbook pro and formatted the old laptop, when I opened the Parallel I had on my laptop it told me that Windows in no longer a genuine software although I've been working with it on my previous macbook pro and it is a genuine windows..What can I do?
I tried to retype my licence to reactivate windows but it wouldn't work!!
PLease help..

Did you, by any chance, make a backup of your old MBP on which there is still a copy of the Windows virtual machine? If so, try copying that over to the new MBP to replace the VM giving you trouble.
Windows periodically checks the hardware configuration it's running on and if too many factors have changed, it puts up the complaint you're seeing. That may have been aggravated by how Migration Assistant transferred the VM file. I use VMware Fusion rather than Parallels and when a VM is moved to a new Mac, Fusion senses that and asks if the VM was moved or copied; if you answer copied, Fusion assigns a new MAC address to avoid network conflicts if both instances of the VM are running at the same time. But the new MAC address also triggers Windows to complain, as yours has. Does Parallels ask that question too, or does it, perhaps, just assume it's been copied? A more complete discussion of what you're running up against can be found here.

Similar Messages

Trackpad gestures not working after migration assistant

I just got a new 13" macbook pro for my wife. I initially created an admin account for myself and everything seemed fine. Then I ran the migration assistant to import my wife's account from her old macbook (~3 years old, running snow leopard). Now some trackpad gestures, like the 2 finger scroll, don't work in her account. Some do, like pinching and unpinching to zoom.
I've tried turning all the gestures off in preferences, then turning them back on again, but to no avail - 2 finger scroll doesn't want to work.
It seems like it must be some old trackpad settings that are overriding the new - her old macbook had the button and did not do gestures. But I don't know how to get rid of any imported trackpad settings so it will go back to default behavior.

Same thing happen to me. Had to go into iTunes folder and use old iTL file to get iTunes to open again. But after I did that my iPhone now isn't being recognized by iTunes and it wants me to wipe it. I also can't update to iTunes 11...I'm stuck on 10. It says I should update when I manually check for update but the store says there is nothing for me to download. This is so frustrating.

"Find Form" calendar is not working after migration

Hi,
We have migrated from Oracle 9i to 10g.we have one form ''FormA" and "find form" for that FormA.Calendar functionality is present in both FormA and "Find FormA".if we try to use calendar functionality in "Find formA",its giving error like FRM-40104 - No such block calendar,FRM-40105(unable to resolve reference to item claendar.cell1.........),FRM-41045 (cannot find item - invalid id).Actually this scenario is not working after migrating the FORMS application to 'OAS10.1.2' from 'OAS904' .
In 'OAS904' ,The calendar item is present in the 'FormA' form, the 'calendar.show' hides the "Find FormA" and appears in the FOrmA and uses FormA's calendar item and after selecting the date,the date s applied to the "Find FormA"
But after migration, the "Find FormA" is not hiding, so its not able to retrieve the calendar properties.Because the calendar is present in "FormA".
Any problem with pll files like 'qmslib65','qmsolb65',qmsevh65'??
please help me by providing suggestions.
Thanks

qmslib65','qmsolb65',qmsevh65Are these libraries self-written or from some third-party tool?

FCP Not Working after Migration to New Mac

OK this is really making me mad. i bought a new mac, and used the cool now migration assistant to bring all my stuff over. apps, docs, all that stuff. and when i try everything works great except Final Cut Express. I open it and it asks for the the serial number, i put in the one i have, and it won't let me click OK. any one know what to do? cause that really makes no sense to me, why can't i use my own apps. all i did was transfer it.

Just did a migration myself. I got a new MacBookPro and did a migration from my MacPro. FCE worked fine without a hitch. I had trouble with DVD Pro in FCP. I reinstalled FCP which fixed DVD Pro but broke Compressor. Looked on the archives on this forum and did the fix:
http://discussions.apple.com/thread.jspa?threadID=1060925&tstart=0
When I copied over compressor.app and the associated library files it worked.
The other strange thing was iMovie 08 on the new Mac was then hosed. I did the same trick, copied the .app and Library directory from my working MacPro and all worked fine.

Email account and Internet service not working after migration onto a new (upgraded 3rd party) 2012 MBP. Hardware or software issue.

I just purchased a refurb Mac Book Pro from the Apple on-line store. When I received the machine (serial number) I purchased 3rd party (OWC) parts. All of these were installed by the authorized, local Apple repair store I have had excellant results with past issues with my 2006 MBP. The parts installed are: 16 meg ram, 240 SSD and a 1 T installed replacing the optical drive.
Feeling ready now, I had the Apple store do the migration from my 2006 MacBook Pro (OS 10.6.8) over to the 2012.
When trying to get the new machine into the production flow, I cannot get email to work. It will launch but I cannot access accounts.
During the One to One, then moved over to the Genius Bar appointment, they reentered the account(s) data. Nothing.
Also at this time they noticed that the Internet connection was not working.
A new internet account was set up and it worked. They (Genius) launched email and the Internet connection crashed. This was repeated about 5 times.
The computer was left with Apple to reinstall the OS (10.8) - their best suggestion as a fix and I have now had a call to say that the install did not correct the problem. Now they are questioning the install of the 3rd party parts as the possible problem.
I'm to go back into the Apple store to discuss the next steps.
I would really, really appreciate anyones thoughts / suggestions on this problem. Is it software or hardware? Should I re-install the original ram and 500 m hard drive to start over with the migration? I'll be honest here and state - I'm not a technician in computers or this side of technology. That is why I have reliable parties do the install and trouble shoot. Not a comfortable feeling being at their mercy.
Advanced thanks to all who believe they have answers.

Back from the Apple store with my 2012 MacBook Pro.
After one re-install of the OS - no better - a clean install was performed - purging all of the data that they had migrated over from my 2006 MBP last week.
The belief is, that the migrated data from my 2006 MBP was too great of a leap for the new 10.8. My (a lot) software was too dated and there in was a "blip" of some sort in some / one of the programs.
So - all of the OWC parts and pieces that I had installed are not the issue - as they all show up on the About this Mac - and other things are functional. Yeah.
I now have my 2012 back (with upgrades) in the original form (OS and programs) and I will start a one by one migration of programs that I do need and use. Being cautious not to make one large transfer.... weeding out programs that will no longer be needed or will work on the OS 10.8. I will manually set up the email accounts one by one.
Fingers crossed.

Windows 8.0 Photo Feature - Collage not Working after Windows 8.1 Upgrade

Purchased a HP ENVY 23-d160qd TouchSmart All-in-One CTO Desktop PC with Windows 8.0 Professional factory installed. Loved the feature that Windows Photo had that would randomly display an ever changing full screen collage of all the jpeg photos save on the computer. Not sure how this all happened- how configured.
When I finally updated to Windows 8.1 Professional a few months ago, this feature was not working or available.
What am I missing? Really miss this feature a changing collage of 15 years of my history.

Ranne,
Welcome to the HP Forum.
I think you can recover the setup.
One method to try:
Windows key (opens your Start Screen) > type anywhere Background >
Select Change Desktop Background
There you can select:
First, Navigate to the the folder from which you want to pull the photos you want to see
Next, place a check mark next to each photo -- or just select "all" to select the group
Select the duration (time) for each photo to remain on the screen
Click the Kudos Thumbs-Up!
It is a nice way to say “Thank You" for the help.
Although I strive to reflect HP's best practices, I do not work for HP.
Kind Regards,
Dragon-Fur

License not working after migrating to new MacBook Pro

I migrated recently to a new MacBook Pro. Aperture is finding it hard to recognize my license from earlier MacBook Pro
Aperture license shows blank. Asks for license. Does not accept my Aperture 2 or 3 license.
Do I have to ?
* Backup my data
* Uninstall Aperture 3 that was migrated
* Install Aperture 2 again
* Put license
* Apply Aperture 3 upgrade again
* Open photo libraries to check compatibility
Any recommended way of handling the license recognition with least hassle?
Last working setup
* MacBook Pro Core 2 Duo 2.1 GHz
* Snow Leopard 10.6.4
* Aperture 2
* Aperture 3 upgrade applied to Aperture 2
Now
* MacBook Pro i5 2.4GHz
* Snow Leopard 10.6.4
* Aperture 3 (Migrated from MBP2.1Ghz)
Any help would be appreciated.

Tony Gay wrote:
Migrating a Pro application will not work, you need to delete the Aperture application, only the ap, from your MBP, and do an install from the supplied disc or download, this should then take you serial number.
Tony
I keep reading people state this, but I've migrated a bunch of times since first getting Aperture 1 (or whatever Apple called it). I just did a migration from a 15" MBP (Early 2009) to a brand spanking new 17" MBP i7. Aperture 2 is working perfectly. I'm not bragging or anything, because if something is going to go wrong, it will go wrong with me. Yet, I haven't had any issues with any migration and "Pro apps" including moving iMacs to iMacs, iMacs to MBP, MBP to iMacs, etc etc.
Now I'm paranoid that Aperture is going to blow up on me next week!

Brand New iTouch Not Working After Upgrade

I have a MacBook running 10.4.11 and the latest iTunes software, if that helps any.
I just bought an iTouch on Black Friday and received it today (via Amazon). It worked fine out of the box. I put music and videos on it and it was sweet. I wanted to put applications on it, but the software needed to be updated. All right, fine. I updated to 2.2. Now when it restores, I get Error -36 and it says that the iPod cannot be synced to because a file is missing. I can use the apps fine, but I didn't buy this thing to play games on it.
So is there a way I can downgrade my iTouch software to 2.1 or something and have it be functional again?

Welcome to the discussions,
Did you see if there are any software updates for your new macbook available?
Did you try to log in as a new user and see if you can connect?
I read that in some cases installing 10.6.4 from the scratch instead of using the migration assistant worked.
Also check if image capture is set to open no application when a camera is detected.

Mail not responding after migration assistant to new mbp

I just got a new macbook pro, and migrated everything except applications via time machine from my old macbook (both with up-to-date snow leopard).
When i try to open Mail, it pops up saying it will import all my old mail - this completes and i press 'done' - however the main mail window pops up with an empty inbox and automatically i get the rainbow wheel which goes on indefinitely; more than an hour. I've tried several times and this is what happens, can't access anything.
How do i resolve this? is it best to delete all my mail first, open mail and then import from time machine? if so, how do i delete mail manually?

Not sure why this did not work. If you want to do over, then in the Finder remove the Mail folder at Home/Library/Mail, and the com.apple.mail.plist file at Home/Library/Preferences. Then copy those files from the time machine.
Ernie

Application not working after migration

Hi,
An application developed in HTMLDB Version-2.0 is migrated to a new server with version-2.2. Few links like edit (to edit rows) are not working. What could be the reason

Hi
1) Old URL-
http://es40.au.oracle.com:7778/pls/marvel/f?p=102:1:254279794898873443:fsp_sort_6::RP&fsp_region_id=5100103122412382
2) New URL - http://sgord-dev1.sg.oracle.com:7780/pls/apex/f?p=135:1:1558885729019129 (which is not working)
3) Application ID before migration - 102
4) Application ID now is - 135
If I login as Admin, all links are working properly, and can edit everything. But if I login as different user edit links and dropdowns are not displayed.
Regards,
Pallavi

Application is not working after migrated to 11.1.2.4

Hi expterts,
I developed an adf application on JDeveloper 11.1.1.6. It works without problem on 11.1.1.6.
Briefly uses following technologies: ADF faces, facelets and taskflows, EJB, hibernate...
When i wanted to go on develop with 11.1.2.4, I copied my App root folder to another folder. And chosed .jws application file from 11.1.2.4 version. Then IDE wants me to confirm about migration, then i accepted.
I develop a supplierList structure for feeding the select one choice components' selectItems. These provide load the db objects on the first calling and manages by my ListManager class.
These supplier classes initialize on the MBean init method. MBean init method calls on taskflow initializer. The project (VCUtil) that includes Supplier classes is on my main ViewController project as ADFLibrary.
But after migration when i deploy the application on my Integrated weblogic Server. oops does'nt seen my jspx screens properly on first attempt which includes supplier classes. But when i refresh the screen it can be loaded properly.
The log contains only that line:
<20-Sep-2013 10:33:31 o'clock EEST> <Notice> <Stdout> <BEA-000000> <10:33:31,189 DEBUG [PerformanceMonitor_lsr6sq_Impl] Method public java.util.Collection com.acme.model.domain.ad.sessionbean.ADManagerBean.findCurrencies() took 167 (ms)>
<20-Sep-2013 10:33:31 o'clock EEST> <Info> <ServletContext-/RestAutomation> <BEA-000000> <JspServlet error: Servlet unable to dispatch to the following requested page: The following exception occurred:oracle.adf.controller.activity.ActivityLogicException: ADFC-06015: An exception occured when invoking a task flow initializer.>
My first supplier class is CurrencySupplier, and i can see acc.to the log it works, the second one is DepartmentSupplier class. So i expect log stdout about findDepartments() method too. But nothing, i guess when executing on CurrencySupplier there might be a wrong, that's why can not go on. But when i refresh the page at that time executes the DepartmentSupplier class. If i refresh page for Supplier class count times then page loads.
    public void init()
        try
            if (ObjectUtil.isNull(currencySupplier = (CurrencySupplier)ListManager.getInstance().getSupplier("currencies")))
                currencySupplier = new CurrencySupplier();
            if (ObjectUtil.isNull(departmentSupplier = (DepartmentSupplier)ListManager.getInstance().getSupplier("departments")))
                departmentSupplier = new DepartmentSupplier(false);
            if (ObjectUtil.isNull(countrySupplier = (CountrySupplier)ListManager.getInstance().getSupplier("countries")))
                countrySupplier = new CountrySupplier();
            if (ObjectUtil.isNull(cityForCountrySupplier = (CityForCountrySupplier)ListManager.getInstance().getSupplier("citiesforcountry")))
                cityForCountrySupplier = new CityForCountrySupplier(false, null);
            else
                cityForCountrySupplier.refreshList(null);
            if (ObjectUtil.isNull(districtForCitySupplier = (DistrictForCitySupplier)ListManager.getInstance().getSupplier("districtsforcountry")))
                districtForCitySupplier = new DistrictForCitySupplier(false, null);
            else
                districtForCitySupplier.refreshList(null);
public class CurrencySupplier extends SimpleListSupplier
    public CurrencySupplier(boolean blankItemApplied)
        super(blankItemApplied);
    public CurrencySupplier()
        super();
    @Override
    public void loadList()
        try
            UtilBean utilBean = new UtilBean();
            clearList();
            list.addAll(utilBean.findCurrencies());
            Collections.sort(list);
            itemList.addAll(ConversionUtil.getConvertedToSelectItemList(list, isBlankItemApplied()));
        catch (Exception exc)
            exc.printStackTrace();
    public String getListName()
        return "currencies";
I hope that i could explain the problem
Thx, bgrds

Are there missing / invalid entries in Settings >> General >> About ?

PPR does not work after migrating from ADF 11.1.1.0.2 to 11.1.1.1.1

Hi, I'm able to programmatically refresh my UI components in ADF 11.1.1.0.2. After migrating my application to ADF 11.1.1.1.0 using the latest Jdev, I noticed that all the programmatically PPR no longer work. I'm using ADF Faces, managed beans and EJB. Data Control is not used.
In addition, I noticed in Section 7:Rerendering Partial Page Content of the latest Web User Interface Developer's Guide(B31973-03), a new paragraph was added, stating that the clientComponent attribute of the target component should be set to "true" to enable PPR programmatically. An earlier version of the developer guide(B31973-01) does not have this paragraph.
Given the huge amount of work required in going back to update the code, is there a way for me to set ADF 11gR1 to restore to the earlier behaviour in 11.1.1.0.2 by setting some parameter somwhere (e.g. in the web.xml)?

No there is no such switch. If you don't want to go through your code (which should be possible by find in files with a regular expression), you have to switch back to 11.1.1.0.2.
This would not be an option to me because of the buds fixed in 11.1.1.1.0.
Think aoubt the next version which is scheduled later this year. There you will have the same problem. If you are not fixing the code you have to stay on 11.1.1.0.2 forever.
Timo

Hotkey (Ctrl+B) is not working after migration from Forms 6i to 10g

Dear Gurus,
Need your help regarding the following problem:
After migrating from Forms 6i to 10g (Rel 2), Ctrl+B (used to list the blocks in a form) hotkey is not working anymore (all other hotkeys are working fine). I've checked my FMRWEB.RES and it contains an entry for Ctrl+B:
66 : 2 : "Ctrl+B" : 70 : "Block Menu"
Additional Information:
OS: AIX
NLS_LANG = UTF8
fmrweb_utf8.res also contains the same text for Ctrl+B as above.
I tried to reproduce it on my Windows Machine (with NLS_LANG set to AMERICAN_AMERICA.WE8ISO8859P1) and its not working as well. I don't have right to put move files on AIX server but i can try anything (on my local system) suggested by the Oracle gurus.
Best Regards,

Dear Gerd,
"are you sure, that it is the hotkey"
Yes, i am dead sure. Since:
(1) It was working fine in forms 6i
(2) If you run a form and select Help => Keys, you will see Ctrl+B on the top of list
The problem is its not taking into account the keys which i am defining in the file (although i am following the same procedure detailed on metalink.oracle.com).
Regards

Hotline is not working after migrating to MPLS

Hi,
I am facing one new problem, after migrating with MPLS link my customer not able to make calls. If he connecting to Leased Line then its working(OLD LINE). In data also we faced same problem, after removing the TCP Compression then only data also start to work. If any body aware of this type of problem can you please help me.
Regards,
Sunish

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

Photoshop 7.0 not working after Migrate

Hello all. First post and hopefully not my last. I do hope it is the last time I have a problem though:)
I have a question. I have just used Migrate Assist to transfer my stuff from my 3 year old Macbook 13" to my New MacBook Pro.
I have Photoshop 7.0 on my old Mac, it works fine. Now that I have transfered my life to my MBP, Photoshop is not working. All my other apps work just fine, Word, office, etc.
It states "an unexpected and unrecoverable problem has occurred because of a program error."
I am a self-employed artist and a company I worked for authorized me to use this a couple of years ago. I will admit, I am much better using a program than I am with the ....umm... software side of things.
Any help would be great.

Sounds like you will have to try reinstalling PS 7 to replace any files that didn't migrate properly.
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Macsimum News Associate Editor  Creator of 'Mac611 - Mobile Mac Support'

Windows on Parallel, on new MacbookPro not working after migration assistant

Similar Messages

Maybe you are looking for