Windows server 2012 failover cluster error: Cluster resource 'Virtual Machine Configuration ... of type 'Virtual machine configuration in clustered role ... failed.

I have two windows 2012 host server that are clustered using windows failover cluster feature. Each server is hosting four VMs. When migrating from Host2 to Host1, the migration failed with the following error:
Cluster resource 'Virtual Machine Configuration SCPCSQLSRV01' of type 'Virtual Machine Configuration' in clustered role 'SCPCSQLSRV01' failed. The error code was '0x569' ('Logon failure: the user has not been granted the requested logon type at this computer.').
When this happens, the VM that I was migrating can no longer be started even on the original host. The only remedy is to restart the host server.
Any suggestion on resolving this problem?
Thanks
Ikad

Thanks. The article referred to above gives the solution to my issue. There is a group policy that is applied to the OU where the host servers were placed. Doing gpupdate /force temporarily removes the problem. Unfortunately the NT Virtual Machine\Virtual
Machines account is a special account that cannot be added like other accounts and granted the log on as a service right. The thread
http://social.technet.microsoft.com/Forums/en-US/winserverhyperv/thread/d56f2eae-726e-409a-8813-670a406593e8 contains how it can be added which is by creating a group and running the command
Net localgroup VMTest “NT Virtual Machine\Virtual Machines” /add
to add it to a local group VMTest. VMTest is then assigned the right to log on as a service.
Ikad

Similar Messages

Windows Server 2012 Failover Cluster (Hyper-V) Event Id 1196

Hi All,
I just installed Failover Cluster for Hyper-V on windows server 2012 with 2 nodes. I got following error event id 1196.
reCreated / deleted Cluster Host A record on DNS and nothing happened.
Any suggestion?
There is similar topic but it couldnt help
http://social.technet.microsoft.com/Forums/en-US/winserverClustering/thread/2ad0afaf-8d86-4f16-b748-49bf9ac447a3/
Regards

Hi,
You may refer to this article to troubleshoot this issue;
Event ID 1196 — Network Name Resource Availability
http://technet.microsoft.com/en-us/library/dd354022(v=WS.10).aspx
Check the following:
Check that on the DNS server, the record for the Network Name resource still exists. If the record was accidentally deleted, or was scavenged by the DNS server, create it again, or arrange to have a network administrator create it.
Ensure that a valid, accessible DNS server has been specified for the indicated network adapter or adapters in the cluster.
Check the system event log for Netlogon or DNS events that occurred near the time of the failover cluster event. Troubleshooting these events might solve the problem that prevented the clustered Network Name resource from registering the DNS name.
For more information please refer to following MS articles:
DNS Registration with the Network Name Resource
http://blogs.msdn.com/b/clustering/archive/2009/07/17/9836756.aspx
Lawrence
TechNet Community Support

Windows server 2012 Datacenter Hyper-V Cluster -- Failed to validate Operating System Installation Option?

Hi I have a 4 node Windows server 2012 Hyper-V cluster. When I try to run a cluster validation report, everything else is fine but it fails at validate the Operating System Installation Option step. I did some research but couldn't really find any solution.
Anyone knows how to pass this test? Thanks.
Here's the error I get when run the test:
An error occurred while executing the test.
The operation has failed. An error occurred while getting the operating system installation option for node "server1"

Hi JasonLiu2002,
Please post the original error information, the current information is so wide that difficult to determine where may have issue and please offer more information about your
server configuration, you can refer the following article to prepare your cluster environment first.
Windows Server 2012 Hyper-V Best Practices (In Easy Checklist Form)
http://blogs.technet.com/b/askpfeplat/archive/2013/03/10/windows-server-2012-hyper-v-best-practices-in-easy-checklist-form.aspx
When you preparing the new cluster on Server 2012 please install the Recommended hotfixes and updates for Windows Server 2012-based failover clusters updates.
http://support.microsoft.com/kb/2784261
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows server 2012 essential installation error

hi all
I am attempting to install Windows Server 2012 Essentials which will be used as a domain controller. So at the point in the installation when asked about fresh install I select that option. I answer:
Date, Time, TZ etc
Company name
Domain name RPA
Computer Name
Administrator Account username
Administrator account user password: 13 characters, mixture of upper, lower case, numbers and special characters. Confirm
Standard user username
Standard user password: 13 characters, mixture of upper, lower case, numbers and special characters. Confirm
The install continues, reboots , then it continues to the installation screen
Progress bar continues to move across the screen.
When the progress bar gets to approximately 34%, it remains there for quite some time, then I get the screen that states:
"AN ERROR HAS OCCURRED WHILE SETTING UP YOUR SERVER.
IF YOU PURCHASED YOUR SERVER FROM A HARDWARE MANUFACTURER, CONTACT THE MANUFACTURER FOR SUPPORT
TO SAVE THE ERROR LOGS, IT IS RECOMMENDED THAT YOU SELECT A FOLDER ON A REMOVABLE MEDIA SUCH AS A USB FLASH DRIVE SO THAT YOU CAN ACCESS YOUR FILES FROM ANOTHER COMPUTER."

had this error before too. What server hardware you got? Where did your Server Installation media come from, MSDN, Retail store? Are you installing on a RAID? if so, what configuration and what is the status of the drives... are they new? the same?
Check out this troubleshooting guide... it should help you identify the area where you do not meet the requirement.
and here is the installation guide which points out some precautions you should note prior to installation.
Mike Scotto

Cluster Quorum Disk failing inside Guest cluster VMs in Hyper-V Cluster using Virtual Disk Sharing Windows Server 2012 R2

Hi, I'm having a problem in a VM Guest cluster using Windows Server 2012 R2 and virtual disk sharing enabled.
It's a SQL 2012 cluster, which has around 10 vhdx disks shared this way. all the VHDX files are inside LUNs on a SAN. These LUNs are presented to all clustered members of the Windows Server 2012 R2 Hyper-V cluster, via Cluster Shared Volumes.
Yesterday happened a very strange problem, both the Quorum Disk and the DTC disks got the information completetly erased. The vhdx disks themselves where there, but the info inside was gone.
The SQL admin had to recreated both disks, but now we don't know if this issue was related to the virtualization platform or another event inside the cluster itself.
Right now I'm seen this errors on one of the VM Guest:
Log Name: System
Source: Microsoft-Windows-FailoverClustering
Date: 3/4/2014 11:54:55 AM
Event ID: 1069
Task Category: Resource Control Manager
Level: Error
Keywords:
User: SYSTEM
Computer: ServerDB02.domain.com
Description:
Cluster resource 'Quorum-HDD' of type 'Physical Disk' in clustered role 'Cluster Group' failed.
Based on the failure policies for the resource and role, the cluster service may try to bring the resource online on this node or move the group to another node of the cluster and then restart it. Check the resource and group state using Failover Cluster
Manager or the Get-ClusterResource Windows PowerShell cmdlet.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-FailoverClustering" Guid="{BAF908EA-3421-4CA9-9B84-6689B8C6F85F}" />
<EventID>1069</EventID>
<Version>1</Version>
<Level>2</Level>
<Task>3</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-03-04T17:54:55.498842300Z" />
<EventRecordID>14140</EventRecordID>
<Correlation />
<Execution ProcessID="1684" ThreadID="2180" />
<Channel>System</Channel>
<Computer>ServerDB02.domain.com</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="ResourceName">Quorum-HDD</Data>
<Data Name="ResourceGroup">Cluster Group</Data>
<Data Name="ResTypeDll">Physical Disk</Data>
</EventData>
</Event>
Log Name: System
Source: Microsoft-Windows-FailoverClustering
Date: 3/4/2014 11:54:55 AM
Event ID: 1558
Task Category: Quorum Manager
Level: Warning
Keywords:
User: SYSTEM
Computer: ServerDB02.domain.com
Description:
The cluster service detected a problem with the witness resource. The witness resource will be failed over to another node within the cluster in an attempt to reestablish access to cluster configuration data.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-FailoverClustering" Guid="{BAF908EA-3421-4CA9-9B84-6689B8C6F85F}" />
<EventID>1558</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>42</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-03-04T17:54:55.498842300Z" />
<EventRecordID>14139</EventRecordID>
<Correlation />
<Execution ProcessID="1684" ThreadID="2180" />
<Channel>System</Channel>
<Computer>ServerDB02.domain.com</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="NodeName">ServerDB02</Data>
</EventData>
</Event>
We don't know if this can happen again, what if this happens on disk with data?! We don't know if this is related to the virtual disk sharing technology or anything related to virtualization, but I'm asking here to find out if it is a possibility.
Any ideas are appreciated.
Thanks.
Eduardo Rojas

Hi,
Please refer to the following link:
http://blogs.technet.com/b/keithmayer/archive/2013/03/21/virtual-machine-guest-clustering-with-windows-server-2012-become-a-virtualization-expert-in-20-days-part-14-of-20.aspx#.Ux172HnxtNA
Best Regards,
Vincent Wu
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Server 2012 Failover Cluster No Disks available / iSCSI

Hi All,
I am testing out the Failover Clustering on Windows Server 2012 with hopes of winding up with a clustered File Server once I am done.
I am starting with a single node in the cluster for testing purposes; I have connected to this cluster a single iSCSI LUN that is 100GB in size.
When I right click on Storage -> Disks and then click 'Add Disk', I get No disks suitable for cluster disks were found.
I get this, even if I add a second server to the cluster, and connect it to the iSCSI drive as well.
Any ideas?

Hi All,
I am testing out the Failover Clustering on Windows Server 2012 with hopes of winding up with a clustered File Server once I am done.
I am starting with a single node in the cluster for testing purposes; I have connected to this cluster a single iSCSI LUN that is 100GB in size.
When I right click on Storage -> Disks and then click 'Add Disk', I get No disks suitable for cluster disks were found.
I get this, even if I add a second server to the cluster, and connect it to the iSCSI drive as well.
Any ideas?
For testing purpose you'd better spawn a set of VMs on a single physical Hyper-V host and use shared VHDX as a back clusterd storage. That would be both much easier and much faster then what you do. + it would be trivial move one of the VMs to another physical
host, shared VHDX to CSV on a shared storage and go from Test & Development to production :) See:
Shared VHDX
http://blogs.technet.com/b/storageserver/archive/2013/11/25/shared-vhdx-files-my-favorite-new-feature-in-windows-server-2012-r2.aspx
Virtual File Server with Shared VHDX
http://www.aidanfinn.com/?p=15145
Guest
VM Cluster with Shared VHDX
http://technet.microsoft.com/en-us/library/dn265980.aspx
For a pure iSCSI scenario you may try this step-by-step guide (just skip StarWind config as you do have a shared storage already with your SAN). See:
Configuring HA File Server on Windows Server 2012 for SMB NAS
http://www.starwindsoftware.com/configuring-ha-file-server-on-windows-server-2012-for-smb-nas
Hope this helped a bit :)
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

Windows server 2012 Data Center with VDI configuration error message ( The remote session was disconnected because there are no remote desktop license servers available)

Dears,
I have two windows server 2012 Data Center and I configured (Virtual Desktop Interface)VDI on it's.
All my clients connected on both of servers by used Remote Desktop sessions ,5 months since.
Currently,when the clients is connected on the both of servers they received the following error:
"The remote session was disconnected because there are no remote desktop license servers available to provide license"
Kindly note, I installed windows Licenses Server Data Center on the both of servers.
Regards.

Hi,
Please let us know if you have purchased RDS CALs and install it in your RD licensing server.
Also, on RD Session host servers, please make sure that you have specified the license mode and point them to the RD licensing server.
Remote Desktop Services Client Access Licenses (RDS CALs)
http://technet.microsoft.com/en-us/library/cc753650.aspx
RD Licensing Configuration on Windows Server 2012
http://blogs.technet.com/b/askperf/archive/2013/09/20/rd-licensing-configuration-on-windows-server-2012.aspx
Hope this helps.
Jeremy Wu
TechNet Community Support

Windows Server 2012 - Hyper-V - iSCSI SAN - All Hyper-V Guests stops responding and extensive disk read/write

We have a problem with one of our deployments of Windows Server 2012 Hyper-V with a 2 node cluster connected to a iSCSI SAN.
Our setup:
Hosts - Both run Windows Server 2012 Standard and are clustered.
HP ProLiant G7, 24 GB RAM, 2 teamed NIC dedicated to Virtual Machines and Management, 2 teamed NIC dedicated to iSCSI storage. - This is the primary host and normaly all VMs run on this host.
HP ProLiant G5, 20 GB RAM, 1 NIC dedicated to Virtual Machines and Management, 2 teamed NIC dedicated to iSCSI storage. - This is the secondary host that and is intended to be used in case of failure of the primary host.
We have no antivirus on the hosts and the scheduled ShadowCopy (previous version of files) is switched of.
iSCSI SAN:
QNAP NAS TS-869 Pro, 8 INTEL SSDSA2CW160G3 160 GB i a RAID 5 with a Host Spare. 2 Teamed NIC.
Switch:
DLINK DGS-1210-16 - Both the network cards of the Hosts that are dedicated to the Storage and the Storage itself are connected to the same switch and nothing else is connected to this switch.
Virtual Machines:
3 Windows Server 2012 Standard - 1 DC, 1 FileServer, 1 Application Server.
1 Windows Server 2008 Standard Exchange Server.
All VMs are using dynamic disks (as recommended by Microsoft).
Updates
We have applied the most resent updates to the Hosts, WMs and iSCSI SAN about 3 weeks ago with no change in our problem and we continually update the setup.
Normal operation
Normally this setup works just fine and we see no real difference in speed in startup, file copy and processing speed in LoB applications of this setup compared to a single host with 2 10000 RPM Disks. Normal network speed is 10-200 Mbit, but occasionally
we see speeds up to 400 Mbit/s of combined read/write for instance during file repair
Our Problem
Our problem is that for some reason all of the VMs stops responding or responds very slowly and you can for instance not send CTRL-ALT-DEL to a VM in the Hyper-V console, or for instance start task manager when already logged in.
Symptoms (i.e. this happens, or does not happen, at the same time)
I we look at resource monitor on the host then we see that there is often an extensive read from a VHDX of one of the VMs (40-60 Mbyte/s) and a combined write speed to many files in \HarddiskVolume5\System Volume Information\{<someguid and no file extension>}.
See iamge below.
The combined network speed to the iSCSI SAN is about 500-600 Mbit/s.
When this happens it is usually during and after a VSS ShadowCopy backup, but has also happens during hours where no backup should be running (i.e. during daytime when the backup has finished hours ago according to the log files). There is however
not that extensive writes to the backup file that is created on an external hard drive and this does not seem to happen during all backups (we have manually checked a few times, but it is hard to say since this error does not seem leave any traces in event
viewer).
We cannot find any indication that the VMs themself detect any problem and we see no increase of errors (for example storage related errors) in the eventlog inside the VMs.
The QNAP uses about 50% processing Power on all cores.
We see no dropped packets on the switch.
(I have split the image to save horizontal space).
Unable to recreate the problem / find definitive trigger
We have not succeeded in recreating the problem manually by, for instance, running chkdsk or defrag in VM and Hosts, copy and remove large files to VMs, running CPU and Disk intensive operations inside a VM (for instance scan and repair a database file).
Questions
Why does all VMs stop responding and why is there such intensive Read/Writes to the iSCSI SAN?
Could it be anything in our setup that cannot handle all the read/write requests? For instance the iSCSI SAN, the hosts, etc?
What can we do about this? Should we use MultiPath IO instead of NIC teaming to the SAN, limit bandwith to the SAN, etc?

Hi,
> All VMs are using dynamic disks (as recommended by Microsoft).
If this is a testing environment, it’s okay, but if this a production environment, it’s not recommended. Fixed VHDs are recommended for production instead of dynamically expanding or differencing VHDs.
Hyper-V: Dynamic virtual hard disks are not recommended for virtual machines that run server workloads in a production environment
http://technet.microsoft.com/en-us/library/ee941151(v=WS.10).aspx
> This is the primary host and normaly all VMs run on this host.
According to your posting, we know that you have Cluster Shared Volumes in the Hyper-V cluster, but why not distribute your VMs into two Hyper-V hosts.
Use Cluster Shared Volumes in a Windows Server 2012 Failover Cluster
http://technet.microsoft.com/en-us/library/jj612868.aspx
> 2 teamed NIC dedicated to iSCSI storage.
Use Microsoft MultiPath IO (MPIO) to manage multiple paths to iSCSI storage. Microsoft does not support teaming on network adapters that are used to connect to iSCSI-based storage devices. (At least it’s not supported until Windows Server 2008 R2. Although
Windows Server 2012 has built-in network teaming feature, I don’t article which declare that Windows Server 2012 network teaming support iSCSI connection)
Understanding Requirements for Failover Clusters
http://technet.microsoft.com/en-us/library/cc771404.aspx
> I have seen using MPIO suggests using different subnets, is this a requirement for using MPIO
> or is this just a way to make sure that you do not run out of IP adressess?
What I found is: if it is possible, isolate the iSCSI and data networks that reside on the same switch infrastructure through the use of VLANs and separate subnets. Redundant network paths from the server to the storage system via MPIO will maximize availability
and performance. Of course you can set these two NICs in separate subnets, but I don’t think it is necessary.
> Why should it be better to not have dedicated wireing for iSCSI and Management?
It is recommended that the iSCSI SAN network be separated (logically or physically) from the data network workloads. This ‘best practice’ network configuration optimizes performance and reliability.
Check that and modify cluster configuration, monitor it and give us feedback for further troubleshooting.
For more information please refer to following MS articles:
Volume Shadow Copy Service
http://technet.microsoft.com/en-us/library/ee923636(WS.10).aspx
Support for Multipath I/O (MPIO)
http://technet.microsoft.com/en-us/library/cc770294.aspx
Deployments and Tests in an iSCSI SAN
http://technet.microsoft.com/en-US/library/bb649502(v=SQL.90).aspx
Hope this helps!
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Lawrence
TechNet Community Support

Windows Server 2012/2012R2 NIC Teaming Mode

Hi,
Question 1:
In Windows Server 2012 the following teaming mode was recommended for Hyper-V NIC teams:
Teaming mode: Switch Independent
Load balancing mode: Hyper-V Port
All Adapers Active
In a session at TechEd 2014 it was stated that Dynamic is the new recommendation for Windows Server 2012 R2. However, a Microsoft PFE stated a few weeks ago that he would still recommend Hyper-V Port for Windows Server 2012 R2. What is your opinions around
this?
Question 2:
We have a Hyper-V Failover Cluster which isn`t migrated to 2012 R2 yet, it`s running 2012. In this cluster we use Switch Independent/Hyper-V Port for the team. We also use converged networking, having 2 physical adapters bound to the NIC team, as well as
3 virtual adapters in the management OS for management, CSV and Live Migration. Recently one of the team NICs failed, and this incident also caused the cluster membership on the affected node to go offline even though the other team NIC was
connected. Is this expected behaviour? Would the behaviour be different if 2012 R2 with Dynamic mode was being used?

Hello,
As for question number 1:
For Hyper-V workload it's recommended to use Dynamic with
Switch Independent mode. Why?
This configuration will distribute the load based on the TCP Ports address hash as modified by the Dynamic load balancing algorithm. The Dynamic load balancing algorithm will redistribute flows to optimize team member bandwidth utilization so individual
flow transmissions may move from one active team member to another. The algorithm takes into account the small possibility that redistributing traffic could cause out-of-order delivery of packets so it takes steps to minimize that possibility.
The receive side, however, will look identical to Hyper-V Port distribution. Each Hyper-V switch port’s traffic, whether bound for a virtual NIC in a VM (vmNIC) or a virtual NIC in the host (vNIC), will see all its inbound traffic arriving on a single
NIC.
This mode is best used for teaming in both native and Hyper-V environments except when:
1) Teaming is being performed in a VM,
2) Switch dependent teaming (e.g., LACP) is required by policy, or
3) Operation of a two-member Active/Standby team is required by policy.
As for question number 2:
The Switch Independent/Hyper-V Port will send packets using all active team members distributing the load based on the Hyper-V switch port number. Each Hyper-V port will be bandwidth limited to not more than one team member’s bandwidth because the port
is affinitized to exactly one team member at any point in time.
In all cases where this configuration was recommended back in Windows Server 2012 the new configuration in 2012 R2, Switch Independent/Dynamic, will provide better performance.
Microsoft recommend for a clustered Hyper-V deployment
in Windows server 2012 to use Switch Independent/Hyper-V Port as you mentioned and to configure
Hyper-V QoS that applies to the virtual switch. (Configure minimum bandwidth in
weight mode instead of in bits per second and Enable and configure QoS
for all virtual network adapters
Did you apply QoS on the Converged vSwitch after you
created the team?? However Nodes are considered down if they do not respond to 5 heartbeats. The Switch Independent/Hyper-V Port does not cause the cluster to goes down if one NIC failed. The issue is somewhere else and not in the teaming mode
that you choose.
Hope this help.
Regards,
Charbel Nemnom
MCSA, MCSE, MCS, MCITP
Blog: www.charbelnemnom.com
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if
a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Administrator cannot change printer properties on "Advanced" tab from "Devices and Printers" on Windows Server 2012 R2

Hello, dear Colleagues.
User with administrators rights cannot change printer properties on "Advanced" tab from "Devices and Printers" on Windows Server 2012 R2.
If to launch "Devices and Printers" on server, all printer properties on "Advanced" tab are inactive (see screen below).
But I can change it manually with "Print Management". Features become active.
The main purpose - to uncheck "Enable advanced printing features" with powershell
scripts.
$erroractionpreference = "continue"
$colPrinters = Get-Wmiobject -Class win32_printer -computername print_server -Filter "Name like 'printer1' or Name like 'printer2' or Name like 'printer3' or Name like 'printer4' or Name like 'printer5' or Name like 'printer6'" # get printers on server and filter with names
ForEach ($objPrinter in $colPrinters) { # get printer details from WMI
If ($objPrinter.RawOnly -ne "True") { # check that Advanced printing fetaures is turned on
Write-host $objPrinter.Name
Write-Host $objPrinter.RawOnly
$objPrinter.RawOnly = "True" # Untick and update the object in WMI
$objPrinter.Put()
It works on Windows 7 workstation, but does not on print server Windows Server 2012 R2 with error
Exception calling "Put" with "0" argument(s): "Generic failure "
At \\print_server\c$\DisableAdvancedPrintingFeatures.ps1:8 char:17
+ $objPrinter.Put()
+ ~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : DotNetMethodException
Can you help me with that? Look like somethings with rights.
Thank you.

Hello, Alan
Morris.
Thanks for your reply.
I've tried to runs PS Script both locally and remotely, previously running Powershell ISE as Administrator.
I've noticed interesting thing - if to
check "Enable advanced printing features"
manually thru Print Management snap-in, script works fine. But, time to time after some manipulations on print server, this advanced feature returns to enabled state automatically by system, I think. In this case PS Script does not work. Next, if to disable
feature manually again (thru Print Management snap-in),
and enable manually again, PS Script will work. Very strange situation.
Thanks.

Troubleshoot problems with installing updates on Windows Server 2012 Standart Edition

When trying to install last update, receiving next errors:
Installation Failure: Windows failed to install the following update with error 0x80070020: Cumulative Security Update for Internet Explorer 10 for Windows Server 2012 (KB3003057).
Security Update for Microsoft .NET Framework 4.5, 4.5.1 and 4.5.2 on Windows 8 and Windows Server 2012 x64 (KB2978127).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB2982998).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB2993958).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3002885).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3010788).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Microsoft .NET Framework 3.5 on Windows 8 and Windows Server 2012 for x64-based Systems (KB2978121).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3006226).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3005607).
Installation Failure: Windows failed to install the following update with error 0x80070020: Update for Windows Server 2012 (KB2975331).
Installation Failure: Windows failed to install the following update with error 0x80070020: Update for Windows Server 2012 (KB3008627).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3011780).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3003743).
This problem reproduced on all my web-servers (Windows Server 2012 Std). How can I fix these problems

Hi,
Windows update error 0x80070020 can occur if a program is interfering with the automatic update process.
Restart your computer or restart your computer in safe mode with network, then try to install the updates. Detailed information you may reference the link below(this applies also to Windows Server 2012 ):
You receive error 0x80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install updates
http://support.microsoft.com/kb/883825/en-us
If the problem still exits, open Run, type %windir% and hit
Enter, find a text file named WindowsUpdate, uploaded the log file.
Best Regards,
Eve Wang

New Windows Server 2012 install won't boot after installing Hyper-V role.

I have just installed Windows Server 2012 onto a Dell PowerEdge R310. Everything worked okay until I installed the Hyper-V role. After that, when it tries to boot, I get "Your PC ran into a problem and needs to restart. We're just collecting
some error info, and then we'll restart for you. (0% complete)" for a split second, then the system reboots into Automatic Repair mode.
In Automatic Repair mode, my options are Refresh your system (which tells me the drive that Windows is on is locked), Reset your system (which tells me there is no partition), and Automatically Fix your PC (which tells me it can't fix it).
I have updated to the latest version of the BIOS (1.11.0, which Dell states adds Windows Server 2012 support).
I'm at a loss.. I've tried everything I can think of. Has anyone run into this issue and figured out a solution? The only references I can find to this issue talk about Gigabyte motherboards with USB 3.0, but this server pre-dates USB 3.0 by
quite a bit.

Hi,
Not only the BIOS but the iDRAC and storage part also need to ne up date check, have a look at the following list to see what you need for Server 2012:
http://en.community.dell.com/techcenter/os-applications/w/wiki/3868.dell-bios-support-for-windows-server-2012.aspx
If any info was collected during the error then have a look in the event viewer or look for a kernel/memory dump file so you can try to find the issue, in many cases a driver, anti-virus sofware or 3rd part service can cause these kind of issues.
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer
MCSE:Server Infrastructure, MCSE:Desktop Infrastructure, MCSA Server 2012, Citrix CCIA & CCEE, Cisco CCNA, VMware VCP 3/4/5 Blog: http://www.citrix-guru.com and http://www.rds-support.eu Twitter: @dnyvandam

Endeca Windows Server 2012 compatibility (IAP 6.1.1/MDEX 6.2.1)

Hello,
I currently try to deploy Endeca ITL HOST on Windows Server 2012 RTM.
I get an error when doing a Baseline_update action: "Forge.run()" and there are just an empty log to help...
Windows Server 2008 R2 is working fine for me. Does anybody knows Endeca compatibility issues using Windows server 2012 ?
My Endeca version is 6.1.1 with MDEX 6.2.1
Does someone already succeded this operation ? (even with the lastest Endeca version)
Thanks,
Gregory

The component Forge.exe is not working with Windows Server 2012 (c++ runtime error)
It Looks to be the main problem.
Does someone knows how to make it works ? changing manifest maybe ?
Thanks

Windows Server 2012 Standard - OS licensing for physical servers

Hi,
With Windows Server 2012 Standard, I can install the OS on up to two virtual machines.
For physical machines, how many physical servers can I install the OS on if I don't use any VMs?
Thanks

Hi,
Just to add, each license covers up to two physical processors. If you have more than two physical processors in a server, you need to assign additional licenses for it.
More information, please refer to the link below:
Windows Server and Processor Cores… (Part 2): Windows Server 2012
Best regards,
Susie

Failover Cluster Manager : Add node wizard Error " This operation returned because the timeout period expired" Windows Server 2012

Hi Everybody,
I have two node cluster and trying to add the third node (which is a Virtual Machine), all nodes are in different subnet and can communication with each other. While adding the third node it gives the error at the end of wizard " This operation
returned because the timeout period expired ". My domain controller is 2008 Enterprise Server and nodes are all running Windows Server 2012 Standard Edition. Any idea what is causing the issue.
thanks

Hi,
Before you add a server (node) to a failover cluster, we strongly recommend that you run the Validate a Configuration Wizard for the existing cluster nodes and the new node
or nodes. The Validate a Configuration Wizard helps you confirm the configuration in a variety of important ways. For example, it validates that the server to be added is connected correctly to the networks and storage and that it contains the same software
updates. Please post the error or warning report.
Please try to install the Recommended hotfixes and updates for Windows Server 2012-based failover clusters:
Recommended hotfixes and updates for Windows Server 2012-based failover clusters
http://support.microsoft.com/kb/2784261
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows server 2012 failover cluster error: Cluster resource 'Virtual Machine Configuration ... of type 'Virtual machine configuration in clustered role ... failed.

Similar Messages

Maybe you are looking for