Windows server2012

Dear sir,
Pleasant Morning sir, I have some queries please clarify the issues and do needful for us.
I have been installed the windows 2012 server R2 versions in that server need to assign the domain name. Already i have the same domain name in another server(old server). Am going to down the old server. I have changed the domain name
but its work in same network but not in another network. Now i need your support to fix the issues. Please clarify the queries and do needful for us. Thanks
License Agreement Number: 48415120
Thanks $ regards,
Thirumalai M

Hi,
To add the tutorial of AD DS migration that Tripredacus has referred.
Active Directory Domain Services and DNS Server Migration Guide
http://technet.microsoft.com/en-us/library/dd379558(v=ws.10).aspx
Hope this help.

Similar Messages

Adobe Acrobat Reader for Windows Server2012 ?

Is there a recommended Adobe Acrobat Reader for Windows Server2012 ?
Will Version XI (11.0.06) for Windows 8 work ?
It is most annoying not to be able to open pdf files on Server.
Thanks,
Al

Al,
http://www.adobe.com/products/reader/tech-specs.html doesn't mention Windows Server 2012. I expect it should work. It should not kill the system. Give it a try an let us know.

Jak zainstalować Thunderbirda na windows server2012

Witam
po zainstalowaniu Thunder bird w wersji 31 na serwerze windows server2012 nie mogę skonfigurować konta ponieważ nie pojawia się UI dla konfiguracji konta. Interfeace po uruchomieniu programu jest niekompletny.
Welcome
Thunder bird after installing version 31 for windows server server2012 I can not set up an account because it does not appear UI for setting up an account. Interfeace after starting the program is incomplete.

You probably have a newer version of a PDF Library on the system e.g. by installing Digital Editions or Adobe Reader. You will have to uninstall them first and then try again.
Mylenium

M2Sys Bio-plugin on Windows Server2012

I'm unsure if this is the best forum category or not...
We have an M2Sys finger scanner and accompanying software on Windows Server 2003. The software will install but NOT activate on Windows Server 2012. To activate, you launch the program via Control Panel where you insert your credentials
in a couple of 'windows'. Launching on Windows Server 2012 produces only the 'do you want to uninstall' process. M2Sys has been absolutely no help in a simple activation...very frustrating. Of course, for $99 they'll talk to me but they
won't even say whether or not I'll have to pay for the updated version of the software!! Ugh!
Has anyone else experienced this?

I am using both M2SYS fingerprint and finger vein scanner with software for long time. Absolutely fantastic solution and no problems yet. I never faced any customer service problem and their response time is also very quick. I think you have other issues.

I have been unable to reinstall adobe flash player on windows server2012

Followed all of the recomended IE configurations and uninstall and reinstall to no avail.

What exactly means "unable"?

ConsoleOne work-a-like for adminning Windows/AD

I hope the mods won't smite me for asking this here. I've asked over at SpiceWorks, but apparently that's mostly Windows and Linux admins who have no real idea of what "elegance" is.
My question: does anyone know of a tool for administering Windows/AD that can do as much (and as well) as ConsoleOne did for Netware/eDirectory? After 10+ years of using it, I've grown quite fond of the simple tree interface that C1 has, and the fact that I can do almost anything necessary in my eDirectory with it. I really miss that power with our new fire-breathing Windows Server2012 boxes. I haven't yet found anything similar for Windows, and was hoping that someone here might have a pointer, or at least tell me it's a fool's quest.
Thanks,
Dave

On 30/10/2013 14:26, daviddoster wrote:
> My question: does anyone know of a tool for administering Windows/AD
> that can do as much (and as well) as ConsoleOne did for
> Netware/eDirectory? After 10+ years of using it, I've grown quite fond
> of the simple tree interface that C1 has, and the fact that I can do
> almost anything necessary in my eDirectory with it. I really miss that
> power with our new fire-breathing Windows Server2012 boxes. I haven't
> yet found anything similar for Windows, and was hoping that someone here
> might have a pointer, or at least tell me it's a fool's quest.
I never thought I'd see the day that someone wanted something
ConsoleOne-like for administering Windows/AD especially since it's been
deprecated by Novell in favour of iManager and other admin tools/interfaces.
Windows servers are managed via Microsoft Management Console (MMC) - see
http://technet.microsoft.com/en-us/l.../cc709659.aspx for information
about MMC 3.0 available with Windows Server 2012.
Of course if you hooked your Windows Servers up to Novell eDirectory via
Domain Service for Windows you could then use Novell's management tools
to administer the AD-side of things!
HTH.
Simon
Novell Knowledge Partner
If you find this post helpful and are logged into the web interface,
please show your appreciation and click on the star below. Thanks.

Yosemite/Active Directory/Windows Server

After upgrading two iMacs from Mavericks to Yosemite, both now fail to connect to user accounts created with Windows Server2012. When using Mavericks I did not have this issue. Any thoughts? I did unbind but now the binding process fails as well.

This fixed my problem- Network Preferences/Advanced/DNS then add the NAME of your local server to the search domain. Click apply. Next, open Directory Utility and unbind the computer. Lastly, Bind the computer making sure to input the name of the local server in the space for Active Directory Domain (the same name you added to the Search Domain) and click on Bind. Hope this works!

Please help - Connection Refused - Mac to Windows Server 2012

I have downloaded MS Remote Desktop onto my brand new Macbook Air OS X and have tried to connect to my school network - which when logged in says it is "Windows Server2012"
However each time I try to log in it simply says connections refused. Nothing more.
Not sure what I can do next.
Thank you for any help,
Laura

Hi Laura,
Thank you for posting in Windows Server Forum.
Are you trying to remote desktop with IP address or hostname?
Please try both alternate way and check is there any difference between them. Also as suggested by Manouchehr Omari, please see that you have remote desktop enabled on server 2012 and related RDP port (3389) opened for remote connection to take place under
firewall setting. If possible for a try disable firewall and check. You can get more troubleshooting information from beneath link.
Remote Desktop Client on Mac: FAQ
http://technet.microsoft.com/en-in/library/dn473006.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Email Notification on Calendar list Sharepoint Foundation 2013 not sending out email

Hi,
Actually i have 2 problem. I just don't have any idea how to solve them.
1 ) I have a machine installed with Windows Server2012 and Sharepoint Foundation 2013. Email invitation from system and alert me email is working fine. Then I created a few email sending workflow using sharepoint designer 2013. The email are going out fine
for list or document library but gave out error when i tried to send from Calendar list. The error is saying that the outgoing email is not configured correctly. If that was the case, should it be that i will receive error for all.
2) I have another machine with same installation as above but doesn't send out any kind of email(Invitation,alert me, SPD2013 custom worflow). I've checked telnet port 587, it is responding fine. I want to know if i need to open port in the firewall/router
settings for this port or if this issue is due to something else.
Any help is really appreciated.

What about Relay and Authentication?
Trevor Seward, MCC
Follow or contact me at...
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.
Look.
I think this is the correct configuration because it sends emails normaly with SharePoint 2010.
If I configure my own email account in Outbound Security, Sharepoint 2013 sends emails but just when I login to Sharepoint, if other users login it doesn't send emails.
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring

Probably caused by : ntoskrnl.exe ( nt+72f40 )

Dear Friend,
I have a windows server 2008R2 running on Hyper v .The host machine is running windows server2012.on this server,Exchange application is running.This server is getting rebooted itself on every 15-20 days.the mini blue dumb for the issue is as below.Please
help me for the solution.
Microsoft (R) Windows Debugger Version 6.2.9200.20512 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Administrator\Desktop\032214-16718-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: *** Invalid ***
* Symbol loading may be unreliable without a symbol search path.           *
* Use .symfix to have the debugger choose a symbol path.                   *
* After setting your symbol path, use .reload to refresh symbol locations. *
Executable search path is:
* Symbols can not be loaded because symbol path is not initialized. *
* The Symbol Path can be set by:                                    *
*   using the _NT_SYMBOL_PATH environment variable.                 *
*   using the -y <symbol_path> argument when starting the debugger. *
*   using .sympath and .sympath+
Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: Server, suite: Enterprise TerminalServer SingleUserTS
Built by: 7601.22411.amd64fre.win7sp1_ldr.130801-1934
Machine Name:
Kernel base = 0xfffff800`01a07000 PsLoadedModuleList = 0xfffff800`01c4b6d0
Debug session time: Sat Mar 22 18:41:25.076 2014 (UTC + 5:30)
System Uptime: 38 days 7:36:33.296
* Symbols can not be loaded because symbol path is not initialized. *
* The Symbol Path can be set by:                                    *
*   using the _NT_SYMBOL_PATH environment variable.                 *
*   using the -y <symbol_path> argument when starting the debugger. *
*   using .sympath and .sympath+
Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
*                        Bugcheck Analysis
Use !analyze -v to get detailed debugging information.
BugCheck 4A, {7773132a, 2, 0, fffff88002594b60}
***** Kernel symbols are WRONG. Please fix symbols to do analysis.
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information. Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information. Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.
***    Type referenced: nt!_KPRCB
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information. Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information. Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.
***    Type referenced: nt!KPRCB
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information. Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information. Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.
***    Type referenced: nt!_KPRCB
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information. Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information. Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.
***    Type referenced: nt!KPRCB
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information. Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information. Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.
***    Type referenced: nt!_KPRCB
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information. Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information. Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.
***    Type referenced: nt!_KPRCB
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information. Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information. Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.
***    Type referenced: nt!_KPRCB
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information. Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information. Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.
***    Type referenced: nt!_KPRCB
Probably caused by : ntoskrnl.exe ( nt+72f40 )
Followup: MachineOwner
---------

Hi,
Before you start to use WinDbg you also need to configure the symbol path – just go to file->symbol file path and the path you need to enter for the Microsoft public symbol
server is:
http://msdl.microsoft.com/download/symbols
The related article:
Setting up WinDbg and Using Symbols
http://blogs.msdn.com/b/emeadaxsupport/archive/2011/04/10/setting-up-windbg-and-using-symbols.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to control and manage several microsoft accounts and have control

Windows 8 has brought many unique challenges, and very few IT people seem to be able to answer questions like this.
I am a mechanical engineer for a small company who wishes to install Windows server2012 on a new server with new laptops for each user, and some users are intended to have windows tablets in addition to having laptops.
We have written policy in place with regard to using office equipment only for business use, not personal, and that all information is confidential, and only free applications may be downloaded or else they will be paid for by the company for all
who require to use them, so there are no issues with regard to who owns what.
Please reply to the question below in simple language, I understand computers and software and how they work, but I am not an IT guy, and our company cannot afford to employ a permanent IT person, so I need to be able to ensure that certain controls
are in place and effected properly by the IT contractor we employ.
The company must at all times have control over and access to all data on laptops and the server, as it is all intellectual property of the company. How do we create Microsoft accounts that allow us to remain in control despite employees using their
mail address and personal pin numbers as an alias to operate ?

Hi,
As I know, SCOM (system Center Operations Manager) can do some monitor jobs which is close to your goal. It is a cross-platform data center management system for operating systems and hypervisors. It uses a single interface that shows state,
health and performance information of computer systems. It also provides alerts generated according to some availability, performance, configuration or security situation being identified.
Operations Guide for System Center 2012 - Operations Manager
http://technet.microsoft.com/en-us/library/hh212887.aspx
If you want more information about this product, you can open a further discussion in the forum below
System Center Operation Manager Forum
http://social.technet.microsoft.com/Forums/systemcenter/en-US/home?category=systemcenteroperationsmanager
Yolanda Zhu
TechNet Community Support

Missing Administrative Templates in Group Policy Tree.

    Few days ago,I found administrative plateform missing which supposed to be listed under GPO.Meanwhile, GPO reports correctly. I did attempt to registy 'gptext.dll' and success following the suggestion, but it didn't work.And it seems the
'gptext.dll' could be registy repeatly without error. What exactly happened?What real actions i need to do?
   (Based on Windows Server2012 R2 Domain Controller)

Hi,
In my point of view, we can first to check if these Administrative Templates exist. So as Zanderol24 said, did you create central store? if you have created central store, make sure these Administrative
Templates are existed in central store. If you have not created central store, make sure these Administrative Templates are located in PolicyDefinitions folder.
If these Administrative Templates are exist in your central store or PolicyDefinitions folder, we can try to import these Administrative Templates manually.
Best Regards,
Erin

SQLsever2014でのPDF IFilterについて

お世話になります。
現在、SQLsever2014にてPDF IFilterを利用して、PDF用のフルテキストインデックス機能を利用しようと考えていますが、
調べている中では、2014に対応した製品が無いように思われます。
※調べた中では、「PDF iFilter 64 11.0.01」が最新かと認識しています。
SQLserver 2014に対応予定または、対応しているAdobe社のIFilter製品があれば教えていただけますでしょうか？
サーバ構成は以下の通りです。
■OS
　Windows server2012 R2 Standard Edtion
■DB
　SQLsever 2014
よろしくお願いします。

Academic licensing for 2012 Essentials

Hi, I have seen an academic license option advertised by resellers for Windows Server2012 Essentials. Are there any functional differences between this academic license version and the regular version?

Hi,
Thanks for posting in the forum.
Regarding Academic Volume Licensing, it can provide simple, flexible, volume-based pricing. I suggest you could refer to the following article for details.
Academic Volume Licensing
http://www.microsoft.com/education/ww/buy/Pages/volume-licensing.aspx
Hope it helps.
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support

Activation fails using automated phone system

I've used a MAK to activate several Windows Server2012 R2 machines using the automated phone system. On one machine, I enter the confirmation ID and get the "Thanks, you're all done" message, but when I check using slmgr, it still shows Unlicensed.
I've tried using slmgr /atp <confirmation ID>, and get "Error: Product activation failed." I believe I am entering the correct confirmation ID, because if I change it I get an error message that the confirmation ID is invalid.
Any ideas on where to look at why product activation is failing would be appreciated!

Hi bmoranb,
Would you please let us know current situation of this issue? Any update?
I agree with Tim. MAKs by design have a limited number of activations. I suggest that you should contact the
Microsoft Activation Call Center.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Windows server2012

Similar Messages

Maybe you are looking for