Windows sharepoint admin service not starting

Hi,
I found my SharePoint admin service is not started. when tried to start manually, it is throwing an error saying that it couldn't start.
Tried troubleshooting : IISRESET, stsadm -o execadmsvcjobs, run configuration wizards, PS config, service sharepoint web services start & stop.
not able to start to SharePoint admin services.
Could someone please give me suggestion on this to start the admin service.
Not tried rebooting the server, as i need prior approvals from my superiors for doing the same.
Thanks
Badri

Hey there
Well Microsoft patch kb2677070 automatically updates revoked security certificates. It lets Windows Server go out to the internet. But if your server is firewalled away in a DMZ and does not have unfettered internet access, this call to the find the updated
revocation list will fail. When it does, the SharePoint 2010 Administration service will not start.
Open Group Policy Editor. From start->search box, type in gpedit.msc and hit return.
Navigate to Computer Configuration->Windows Settings->Public Key Policies-> Certificate Path Validation Settings.
Click on the “Network Retrieval” tab.
Check the “Define these policy settings” and uncheck the “Automatically update certificates in the Microsoft Root Certificate Program”
Click OK
For further details visit http://sharepointlark.wordpress.com/2013/05/29/sharepoint-2010-administration-service-wont-start/
Thanks
~Dex

Similar Messages

IIS Admin Service not starting

II Admin Service not starting
C:\Windows\system32>net start iisadmin
The IIS Admin Service service is starting.
The IIS Admin Service service could not be started.
A service specific error occurred: 2148073478.

Hi,
Would you please let us know current situation of this issue? Any update?
I agree that Ed provided the correct suggestion. Meanwhile, please also refer to following article.
MachineKey in IIS
Just an addition. If this issue still exists, please refer to following article and troubleshoot.
IIS ADMIN service
fail to start?
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

SFC problem - "Windows Resource Protection could not start the repair service"

We are trying to attempt to fix a Windows 2008 start up problem. We boot the machine from a Windows 2008 CD and go to the repair tool - command prompt.
When we do the command sfc /scannow, we are getting
"Windows Resource Protection could not start the repair service"
We did some researches there someone suggested the trustedinstaller is not running so we tried to do a net start trustedinstaller.
But We are getting
"The windows modulers instaler service is starting
The windows modulers instaler service is starting could not be started
A system error has occured
System error 1067 has occured
The process terminated unexpectedly. "
Anyone can give us an idea to see why we can not run the sfc the first place. Thanks

SYMPTOMS:
All attempts to run command:
sfc /SCANNOW
keep returning the following message:
"Windows Resource Protection could not start the repair service"
SOLUTION:
If you are using any kind of boot image/disk to boot up, you will have to use the "offline" switches (OFFBOOTDIR & OFFWINDIR) along with the SFC /SCANNOW command in order to start repairing your instalation properly.
please remember to tripple-check for corret partition letters, because this is a crucial parameter for SFC to start working properly.
also make sure to confirm whether so called "recovery" partion exists in your specific scenario or not. If so, in most cases this will render the "recovery" partition being the one to be set as a boot partition (OFFBOOTDIR) within sfc command, while Windows
system folder (OFFWINDIR) will actually reside on a different partition.
My scenario is described exactly above and therefore in my case boot partition letter was C: and system partition was D: ...As of that - the proper command line to run SFC successfuly was:
sfc /SCANNOW /OFFBOOTDIR=c:\ /OFFWINDIR=d:\Windows
Successful scan for integrity of all protected system files and replacement of incorrect versions with correct Microsoft versions then looks like this:
X:\sources>sfc /SCANNOW /OFFBOOTDIR=c:\ /OFFWINDIR=d:\WindowsBeginning system scan. This process will take some time.Windows Resource Protection found corrupt files and successfully repaired them. Details are included in the CBS.logwindir\Logs\CBS\CBS.log. For example C:\Windows\Logs\CBS\CBS.log
Once SFC scan completed, I have run the Startup Repair from the repair dialogue menu prior rebooting the system. Remember to click "Cancel" on the prompt for using the System restore in this step. I am assuming you have tried this already time ago and confrmed
it did not resolve the problem, but most importantly - you really would not want to overwrite the files, which you have just repaired with any possibly corrupted ones ;)
After this I've unplugged bootable USB key with the My Windows Vista Enterprise 64bit setup disk image and restarted computer. System booted up properly on first attempt. No issues have been identified as a result of my post boot checks. This completely
resolved the issue in my case. Should you have questions, please let me know.
Pavel

Remote Desktop Management service not starting. service-specific error: %%2284126209 - Event ID: 7024

Hi Forum members,
We have a client that has intermittent issues with RDS on a 2012 R2 server.
As an overview of the environment, the client has a single VMWare host support 2 x Windows 2012 R2 VMs one is the File/Print/Email server and the 2nd is the RDS server used to allow the client to run MYOB Enterprise. Both servers have the AD DS role and
DNS roles amongst others.
The 1st issue is that the RD Connection Broker shows the error: "The server pool does not match the RD Connection Brokers that are in it. and then "1. Cannot connect to any of the specified RD Connection Broker servers".
The above issue seems to be caused by the RDMS service not starting. When you attempt to start it, the service stops and the error in the title is logged in the "System" event log. Full transcript below:
Log Name:      System
Source:        Service Control Manager
Date:          21/01/2015 4:50:32 PM
Event ID:      7024
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      intentionally removed.local
Description:
The Remote Desktop Management service terminated with the following service-specific error: %%2284126209
Event Xml:
<Event xmlns="
<System>
    <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
    <EventID Qualifiers="49152">7024</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2015-01-21T05:50:32.129949400Z" />
    <EventRecordID>53721</EventRecordID>
    <Correlation />
    <Execution ProcessID="568" ThreadID="12436" />
    <Channel>System</Channel>
    <Computer> intentionally removed.local</Computer>
    <Security />
</System>
<EventData>
    <Data Name="param1">Remote Desktop Management</Data>
    <Data Name="param2">%%2284126209</Data>
    <Binary>520044004D0053000000</Binary>
</EventData>
</Event>
In addition in the "Application" event log, the following error is logged:
Log Name:      Application
Source:        MSSQL$MICROSOFT##WID
Date:          21/01/2015 5:24:47 PM
Event ID:      18456
Task Category: Logon
Level:         Information
Keywords:      Classic,Audit Failure
User:          NETWORK SERVICE
Computer:      intentionally removed.local
Description:
Login failed for user 'NT AUTHORITY\NETWORK SERVICE'. Reason: Could not find a login matching the name provided. [CLIENT: <named pipe>]
Event Xml:
<Event xmlns="
<System>
    <Provider Name="MSSQL$MICROSOFT##WID" />
    <EventID Qualifiers="49152">18456</EventID>
    <Level>0</Level>
    <Task>4</Task>
    <Keywords>0x90000000000000</Keywords>
    <TimeCreated SystemTime="2015-01-21T06:24:47.000000000Z" />
    <EventRecordID>4228336</EventRecordID>
    <Channel>Application</Channel>
    <Computer>intentionally removed.local</Computer>
    <Security UserID="S-1-5-20" />
</System>
<EventData>
    <Data>NT AUTHORITY\NETWORK SERVICE</Data>
    <Data> Reason: Could not find a login matching the name provided.</Data>
    <Data> [CLIENT: <named pipe>]</Data>
    <Binary>184800000E0000001F00000055004E0047004500520045005200410055005300530056005200300033005C004D004900430052004F0053004F0046005400230023005700490044000000070000006D00610073007400650072000000</Binary>
</EventData>
</Event>
I have been attempting to resolve these errors for some time, without success. I have read the many KBs and forum entries related to the above and applied a number of the suggested fixes, including the one which suggests to add the NT SERVICE\ALL SERVICES
to the "Logon as a Service" in the "User Rights Assignment" of the "Default Domain Policy" which is linked to the domain level, that both servers are objects of.
My question to the forum is, can anyone come up with a solution to resolve the above issues and all the RDMS service to start which will then hopefully resolve the broker error?
Regards,
David West.

Hi David,
If virtual machines on the server are Windows Server 2012, then it is not supported to install Remote Desktop Connection Broker on a Domain Controller.
More information for you:
Remote Desktop Services role cannot co-exist with AD DS role on Windows Server 2012
http://support.microsoft.com/kb/2799605/de
Guidelines for installing the Remote Desktop Session Host role service on a computer running Windows Server 2012 without the Remote Desktop Connection Broker role service
http://support.microsoft.com/kb/2833839
If the VMs are Windows Server 2012 R2, I suggest you install RDS on a separate machine to see if the issue persists.
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Apple mobile device service not started

Each time i try to sync my iphone to itunes it keeps on saying "apple mobile device service not started"
I know how to start it and everything its that when i start it it says "Windows could nt start the Aplle Mobile Device service on local computer"
I have the newest itunes and i have windows 7

first I would check the event viewer for into about what goes wrong that cause the service to fail
if this don't give a clear image about what the problem is
then I would uninstall itunes and resinstall it
if that didn't help I would ask questions about solve the problem in the itunes for windows forum where people wise in the ways of itunes would be more likely to read your post
https://discussions.apple.com/community/itunes/itunes_for_windows

Apple mobile device service not started please help

Each time i try to sync my iphone to itunes it keeps on saying "apple mobile device service not started"
I know how to start it and everything its that when i start it it says "Windows could nt start the Aplle Mobile Device service on local computer"
I have the newest itunes and i have windows 7

when i start it it says "Windows could nt start the Aplle Mobile Device service on local computer"
Does Windows give you an error code number when AMDS fails to start, Love? If so what number do you you get?

WIA service not started

Hi,
I tried to Scan from Photoshop and this mesage prompted "No WIA compatible devices were detected. Check that your devices is plugged in...".
I found that the Windows Imaging Acquisition is not started in the services.msc list.
What's the issue here? Is it about HP scanning drivers or what? In windows 8.1 it was printing and scanning just fine. Now I can print but I cannot scan anything.
Thanks a lot

More often than not when a device isn't working it is because the driver has become corrupted. Re-installing a fresh copy should help
http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isnt-working-properly?SignedIn=1
http://captaindbg.com/how-to-update-drivers-on-windows-7/ (works on win 8 & win 10)
Wanikiya and Dyami--Team Zigzag

Critical Services Not Starting Automatically & Access to Server occasionally dropping out

For the last few months we have been trying to resolve an issue where access to files on the server (SBS2011 - running domain services, exchange, etc) get so slow or just unresponsive. Logging onto the server is also not possible till it starts responding
again.
We also found that when the server starts, the Netlogon services does not start automatically event though it is set to auto start. There are a number of other services mainly exchange services that do not start as well but it seems this may be due to the
net service not starting.
We have re-installed the OS but this does not seem to have fixed the issue. The environment is a mix of the SBS2011 server, two Windows Server 2003 boxes - one running Terminal Services. The other was being used for SAP but no longer in use. The clients
are mainly XP with a few Windows 7 machines. We are in the process of planning the replacement of the XP machines.

You re-installed SBS2011? - that seems rather drastic. Did you maintain your domain or just set it all up again?
This sounds like a DNS issue but have a look at the event viewer and google/post the Event ID and Source. Given those two you can start to track down the cause and possible fixes at www.eventid.net. Just be aware that SBS2011 has a lot of
"normal" event errors, see http://support.microsoft.com/kb/2483007
You should also run the SBS best practice analyzer and maybe run the "Fix my network" wizard in the SBS console. Also make sure SBS is the DHCP server for the network.
-- Al

EPMA server service not started

Hi All,
I installed Hyperion 11.1.2.2 Essbase, Planning, EPMA, Calculation Manager, FDM and HFM in the single machine in windows server 2008 R2.
but i am facing two issues.
1. In services, EPMA Server service not started.
2. In FDM, I am getting error in connecting to Essbase.
Error: Unable to retrieve target system data.
Is any thing, i have to install additionally?
Regards,
mady

Hi,
In Windows Event Viewer i got this message.
Log Name: System
Source: Service Control Manager
Date: 9/3/2012 12:46:12 AM
Event ID: 7011
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: hyperionepm
Description:
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the Parallels Tools Service service.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7011</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2012-09-03T07:46:12.612304600Z" />
<EventRecordID>70587</EventRecordID>
<Correlation />
<Execution ProcessID="440" ThreadID="16540" />
<Channel>System</Channel>
<Computer>hyperionepm</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">30000</Data>
<Data Name="param2">Parallels Tools Service</Data>
</EventData>
</Event>

Fix for Apple Mobile Device Services not starting

Finally a fix for Apple Mobile Device Services not starting. Basically I got this from someone else in these forums and it worked. Go to C:\Documents and Settings\AllUsers\Application Data\Apple and delete any file in there that says Apple Mobile Device Services (I understand these are cached files...I had about 8 files to delete). Next go to your control panel, click on Add/Delete programs, find Apple Mobile Device Support and delete (remove) it. Once this is all done do not reboot, rather open itunes and go to Help menu /Check for Updates and update to the latest version. This will install the latest version of iTunes and also a new version of Apple Mobile Device Services. Next reboot and it should work for many of you...it did for me. Open iTunes and plug in your device...good luck. I wrote this from memory so if some of the phrases don't match exactly what you see I apologize. Also, this worked for me on a Windows XP computer.

Thanks for posting this, my iTunes randomly started saying the Apple Mobile Device was stopped, and apple's solutions didn't help. I hope this one will, but what do I do if I have the latest iTunes, so it doesn't update? Wait till they come out with an update? It says I need to run the iTunes installer, but I can't find that. Please help, this is really annoying me...=(

OracleHome92 agent service not started

hai All,
I renamed my windows 2003 server machine. After rebooting the server a message appears that oracle intellegent agent exectable encountered a problem and needed to close. After that I noticeed that The oracleHome92 agent service not started. I cannot able to start that service.some eror occurs.... need any extra change?
Please help?
Shiju

You wrote: "Some error occurs"
Let me rephrase that for you: "My car won't start tell me why."
No one can help you if you don't post relevant information.
My advice ... Stop doing things when you don't know the implications. That is why testing environments exist. Rename the server back to its original name and then learn what to do, and test it, before doing it again.

I try to sync but get message apple mobile device service not started?

I try to sync but get message apple mobile device service not started now what?

Here a link on how to restart AMDS on Windows
http://support.apple.com/kb/TS1567

SAP Service Not Starting in BI 7.0

Hi All,
Today morning my BI 7.0 server restarted twice automatically, then I started the server in last known good configuration after that when I tried to start the server from SAP MMC it didn't started and when i checked the sap service in services.msc it gives error <b>"Some services stop automatically when they have no work to do"</b>.and didn't get started.
I found a thread similiar to this problem and following that I used sapstartsrv.exe in usr\sap\SID\......\exe directory. This didn't worked for me and by using this Both the services SAPEP2_00 and SAPEP2_01 got removed from services.msc.
Now I have installed these service again and now I am at same status as in morning,
In Event log
For SAPEP2_00 and SAPEP2_01 the following error are avaliable:
--Initialization failed. Service not started. [ntservmain.cpp 1269]
--Unable to change to Directory
gms40\saploc\EP2\DVEBMGS00\work. (Error 53 ERROR_BAD_NETPATH: The network path was not found. ) [ntservstart.cpp 966]
If any one have gone through such situation please help me out from this, Its has became too critical for me now.
Thanks in advance....
Regards
Vinay Paul

Hi
Service are started now but when I am trying to start the server, it is showing strdbs.cmd, sapcpe.exe in red status "could not be started".
Regards
Vinay Paul
Message was edited by:
Vinay Paul

I have a version Adobe pro 7, my old computer hard drive failed tried to install on my Windows 8.1, will not start up error message

I have a version Adobe pro 7.1, my old computer hard drive failed, tried to install on my Windows 8.1, will not start up get error message? any solutions? It worked perfectly fine on my old computer which was windows 7.0

Hey,
I am sorry but Acrobat 7 is not at all compatible with Windows 8. For this, you will need to upgrade your Adobe Acrobat version.
For better understanding, please refer this kb file:
Compatible web browsers and PDFMaker applications
Regards,
Anubha

WebLogic admin server not starting.

Hi all,
I have a problem with my WebLogic Admin server not starting. Following a VM reboot last week our admin servers are no longer starting. On this particular server we have 3 admin servers serving 3 separate environments.
Theserver seems to be getting stuck right at the very start. I have tried removing tmp, cache and ldap directories. Searched for and removed all .lok files. I have manually turned on full debug to try and flush some extra information through standard out but no luck. It is very peculiar. When we have exported the domain to another box and started the admin server it has come up successfully.
This is the output from the logs - this is literally as far as it get before it hangs and does nothing. As far as I know the next thing WebLogic is doing is checking the version. Has anyone any ideas what the problem could be? It is server wide as all 3 admin servers on the same box are suffering the same problem.
This is Weblogic 10.3.2 on a Solaris vm
JAVA Memory arguments: -Xms256m -Xmx512m
WLS Start Mode=Development
CLASSPATH=/apps/Oracle/Middleware64/patch_wls1032/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/apps/Oracle/jrt/jrmc-4.0.1-1.6.0/lib/tools.jar:/apps/Oracle/Middleware64/utils/config/10.3/config-launch.jar:/apps/Oracle/Middleware64/wlserver_10.3/server/lib/weblogic_sp.jar:/apps/Oracle/Middleware64/wlserver_10.3/server/lib/weblogic.jar:/apps/Oracle/Middleware64/modules/features/weblogic.server.modules_10.3.2.0.jar:/apps/Oracle/Middleware64/wlserver_10.3/server/lib/webservices.jar:/apps/Oracle/Middleware64/modules/org.apache.ant_1.7.0/lib/ant-all.jar:/apps/Oracle/Middleware64/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar:/apps/Oracle/Middleware64/wlserver_10.3/common/eval/pointbase/lib/pbclient57.jar:/apps/Oracle/Middleware64/wlserver_10.3/server/lib/xqrl.jar
PATH=/apps/Oracle/Middleware64/wlserver_10.3/server/bin:/apps/Oracle/Middleware64/modules/org.apache.ant_1.7.0/bin:/apps/Oracle/jrt/jrmc-4.0.1-1.6.0/jre/bin:/apps/Oracle/jrt/jrmc-4.0.1-1.6.0/bin:/usr/bin:/usr/sfw/bin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://hostname:port/console *
starting weblogic with Java version:
Starting WLS with line:
/apps/Oracle/jrt/jrmc-4.0.1-1.6.0/bin/java -jrockit -Xms256m -Xmx512m -Dweblogic.Name=AdminServer -Djava.security.policy=/apps/Oracle/Middleware64/wlserver_10.3/server/lib/weblogic.policy -Xverify:none -da -Dplatform.home=/apps/Oracle/Middleware64/wlserver_10.3 -Dwls.home=/apps/Oracle/Middleware64/wlserver_10.3/server -Dweblogic.home=/apps/Oracle/Middleware64/wlserver_10.3/server -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=/apps/Oracle/Middleware64/patch_wls1032/profiles/default/sysext_manifest_classpath weblogic.Server
<09-Jan-2013 18:32:06 o'clock GMT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.0.1-21-133393-1.6.0_20-20100512-2127-solaris-sparcv9 from Oracle Corporation>

Just a wild guess (as you have restarted the physical servers), it could be related to the entropy of the machine.
What you can try to do is edit the java.security file in the $JAVA_HOME/jre/lib/security directory.
Find the entry securerandom.source and edit the value to file:/dev/./urandom (instead of file:/dev/urandom)

Windows sharepoint admin service not starting

Similar Messages

Maybe you are looking for