Windows Update Fails After fresh install

All,
Complete new installation of Windows 7 Pro on a X200 Tablet version.  All ok, able to run all MS updates without any problems.  After installing Lenovo System update and running the actual updates, I suddenly can't run Microsoft Update any longer, showing following error msg:  "Windows Update cannot currently check for updates because the service is not running.  You possibly have to restart the pc"
Offcourse I have tried rebooting, no success.
Intel drivers are installed, as suggested on another page.  Currently running a systems restore to moment prior of System Update installation.
Any ideas?
Thanks
Pascal
Solved!
Go to Solution.

System is now working properly, even with Lenovo System Update.  Refusing to install the Intel drivers is indeed the solution.  And the system runs smooth.
So thanks for the info!
Pascal

Similar Messages

  • Windows update fails after reverting to factory image

    you need to save it as a .reg file instead of a .txt file, so the icon changes here is a handy link on how to achieve this: http://www.mediacollege.com/microsoft/windows/extension-change.html

    I recently reverted my computer back to the factory image which is Windows 8. I previosly had upgraded to Windows 8.1 and was trying to upgrade again to Windows 10 and that kept failing so I reverted back to factroy image to get a fresh start. Now when I try to get back to Windows 8.1 so that I can then upgrade to Windows 10, the Windows update keeps failing and I am stuck in Windows 8. The Windows Store says I can update to Windows 8.1 but that I have to run all the updates for Windows 8 first. After loaing the factory image, I run Windows Update and the Windows Update program does install a new Windows Update Program. After that, I run Windows Update and it finds 165 updates. When I download and install those, they fail and the system reverts back to Windows 8. Will 165 updates, is there a certal order I should install them? Is there another way to get back to Windows 8.1?   

  • Dv6-2170eo windows update fails after recovery

    I have a HP dv6-2170eo netbook with Windows 7 Home premium (64-bit). My origin hard drive (640GB) failed and I replaced it with 1TB hard drive. I used the recovery DVD's that I made when I bought the laptop and then reloaded Windows 7 on the new hard drive.
    After reloading ,  Windows Update does not work.
    This is the error I get:
    Windows Update cannot currently check for updates, because the service is not running. You may need to restart your computer.
    I can't even install Windows Defender or Microsoft Security Essential
    Intel Chipset driver from 2009-06-04
    My internet access is OK.
    I have restarted my netbook and the error is the same.
    I have reloaded Windows 7 and the error is the same
    Please help me
    Haggann

    I had the same problem with an HP G72. If you have an Intel Chipset, goto Intels website and download there "Intel Rapid Storage Technology Driver" and install it. I had the exact same problems and this fixed them. For some unknown reason this driver is not available on HP's website. I just Googled the driver and it took me straight to Intels website where I downloaded it. Get the driver that you can run from within windows and not the one that runs from a floppy.
    Good Luck,

  • Login to apex_admin failed after fresh install of Apex 3.1

    I have installed Apex 3.1.
    Now i am trying to login to the admin page:
    http://host:7777/pls/apex/apex_admin
    When i submit username and password and press a login button i return to exactly the same login page.
    Apache log show the following:
    <<
    10.63.31.65 - APEX_PUBLIC_USER [14/Apr/2008:17:34:44 +0300] "POST /pls/apex/wwv_flow.accept HTTP/1.1" 302 174
    10.63.31.65 - APEX_PUBLIC_USER [14/Apr/2008:17:34:44 +0300] "GET /pls/apex/f?p=4050:3:3489699423845827 HTTP/1.1" 302 5
    10.63.31.65 - APEX_PUBLIC_USER [14/Apr/2008:17:34:44 +0300] "GET /pls/apex/f?p=4050:3:1586171788692736 HTTP/1.1" 302 5
    10.63.31.65 - APEX_PUBLIC_USER [14/Apr/2008:17:34:44 +0300] "GET /pls/apex/f?p=4550:10:1586171788692736::::FSP_AFTER_LOGIN_URL:\\f?p=4050|3|1586171788692736\\ HTTP/1.1" 302 5
    10.63.31.65 - APEX_PUBLIC_USER [14/Apr/2008:17:34:44 +0300] "GET /pls/apex/f?p=4550:10:882783301072528::::FSP_AFTER_LOGIN_URL:\\f?p=4050|3|1586171788692736\\ HTTP/1.1" 200 4709
    >>
    Any suggestions ?
    Thank you
    Michael

    I have checked the same with Mozilla browser and no problem appeared.
    The problem still exist with IE version 6
    Any ideas what can be the problem ?
    Thank you
    Michael

  • IPhoto library update fails after Yosemite install

    I have installed Yosemite 10.10.2 and iPhoto  Library upgrade is required when I try to open iPhoto. Upgrade process runs but does not complete. Progress meter gets within a gnats nadger of completing, but then stops. I have done all the usual things to try and restart etc. but to no avail. I have tried accessing Time Machine to go back and unravel the Picture files but it also seems that I can't go any further back than yesterday in time machine. As things stand I cannot see any of my some 20,000 images stored in the Library. I hope someone can help. Mel A.

    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

  • Windows Update failed to check for updates with error 0x800B0001

    Hi all,
    I have a WSUS installed on a Windows Server 2008 R2 box, I have a new Windows Server 2012 box (joined to domain) that cannot get updates from the WSUS, whenever I try to search for new updates I receive the following error in event viewer:
    Windows Update failed to check for updates with error 0x800B0001
    Note: I cannot see the Win2K12 server in the WSUS console under computers node.

    I couldn't get it to run even after installing the mentioned KB fixes. So I investigated the error myself, and found a "hack" that seems to fix the issue. Wrote up a small piece on it here:
    http://tplive.azurewebsites.net/2013/12/windows-update-error/
    You and about a thousand other people have reported "I had already installed [the update], but installing it AGAIN fixed the problem.", which is almost assuredly a simple indication that the original installation of the update failed, and you simply did
    not recognize that the installation of the update was not successful.
    The fact that the /selfupdate folder was corrupted (read: missing files) pretty much says it all. There's no bug. Your installation of the update simply failed. (Or, the server wasn't healthy to begin with and you got what you got.)
    Bottom line: The only known cause for a client-side 0x800B0001 error code is that the WSUS server has not been
    properly and completely patched.
    Lawrence Garvin, M.S., MCITP:EA, MCDBA, MCSA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2013)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence R Garvin
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • Windows update error 800f0246 when installing printer driver

    I have Win 7 pro 64 bit and an HP3520 printer.  HP site says a Windows 7 driver is available via windows update.  When I go into Windows update, the drivers shows up under optional downloads.  When I try to download and install it it fails with error code 800f0246.  All other updates install fine.  I tried multiple times with the same error. 
    When I go into device manager the printer is listed under other devices with an icon indicating a driver issue.  When I try to update the driver it finds the downloaded driver that Windows update downloaded.  I select it and it fails.
    I have Windows 7 beta still on my laptop and the printer driver installs from windows update just fine.
    Any ideas?

    No go.  Uninstalled, rebooted, tried to reinstall again, still failed.  Fails when the printer is disconnected as well.  The HP site does not have a driver for manual install.  Any links for a driver lead to here: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01874792&lc=en&dlc=en&cc=us&lang=en&product=305968    Those steps do not work because the driver in windows update fails to install.

  • Can not  start/stop fullfilment server after fresh install

    Can not start/stop fullfilment server after fresh install
    Product: e-business suite (11.5.9)
    Platform: Win XP 5.1 (SP2)
    We have performed a new installation of ebusiness suite in our windows platform.
    Installtion went with out any problem.
    But we can not start/stop the fullfilment server. While trying to start/stop the server we are getting follwing error message:
    c:\oracle11i\prodcomn\admin\scripts\PROD_03274019ih\jtffmctl.cmd start
    script returned:
    C:\oracle11i\prodcomn\admin\scripts\PROD_03274019ih>echo off
    You are running jtffmctl.cmd
    Mon 13/09/2004
    01:46 PM
    "Starting Fulfillment Server for "PROD" on port "9300" ...\n"
    "Error returned while running OUI"
    ERRORCODE = 1 ERRORCODE_END
    .end std out.
    Class not found: oracle.apps.jtf.fm.engine.processor.Processor
    Please let us know how to fix this issue.
    Regards, Kunal

    edit the jtffmctl.cmd and make sure that it point to the correct java path, alse try to use java 1.4.1

  • Windows Update failing with 80200056

    Hi,
    I have recently installed Windows Server 2012 R2 Standard as guest OS on Windows Server 2012 Standard with Hyper-V as host.
    All attempts to download and install updates using Windows Update have been failing with 80200056 error code.
    Here is what event log recorded:
    Log Name : Microsoft-Windows-WindowsUpdateClient/Operational
    Source : WindowsUpdateClient
    Message : Windows Update failed to download an update.
    Please help.

    Might try downloading and installing update rollup.
    http://support.microsoft.com/kb/2887595
    http://www.microsoft.com/en-us/download/details.aspx?id=41076
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Windows update fails, errorcode "WindowsUpdate_80246002" "WindowsUpdate_dt000"

    Hi.
    Mikael Nilsen here.
    When I try to use Windows update, I get the errorcode "WindowsUpdate_80246002" "WindowsUpdate_dt000"
    I have not installed any new programs, only updated Adobe Air.
    I tried to uninstall Adobe Air to check if it was the problem, but got the same errorcode, so why this came up I don`t understand.
    I hope you can help me with this, as soon as possible.
    Best regards
    Mikael Nilsen

    Earlier today, I had the same problem with Win 7 home 64bit. It started this morning, the last update
    in windows update history was KB2993651 installed yesterday 8-27-2014.
    9 hours ago,  tried these fixes:
     Ran the win 7 Microsoft Fixit Windows update repair tool.
     Downloaded Fix It Tool 50202 that completely re installs Windows Update components
     Renamed the SoftwareDistribution directory and restarted the wuauserv  service .
     Did the repair to .NET framework in the programs section of Control panel.
     Uninstalled yesterday's KB2993651 update via the Windows update history section.
     Ran SFC /scannow from an elevated cmd prompt, which found no file errors.
    None of the fixes made any difference, I still had the same problem, Windows update gave the same error code - WindowsUpdate_80246002 WindowsUpdate_dt000.
    I did reset the automatic windows update time to 2pm and Windows update did re-install the kb2993651 update that I just uninstalled 30 minutes earlier, however I could not manually check for Windows updates.
    UPDATE 9hours later..... Windows
    Update is working!!!    I have not done anything to the computer since I posted the above information, 9 hours ago
    when Windows update was NOT working. Windows 7 has been running since that last post with no reboots. I just checked for updates with Windows update and now it is working. I found 10 optional updates including .NET Framework 4.5.1 for Windows 7 x64. I mention
    that update since I did run the REPAIR .NET 4.5 framework (step 4 above) which completed earlier today, and now it found an update for it.
    At any rate, Windows update is now working. I have no idea what fixed Windows update since it did not work as I applied each fix earlier today. If I had the problem again, I would follow the 6 steps above, wait for several hours and cross my fingers that the
    problem will be fixed. 

  • Windows 8 Windows Update fails with error 80244FFF

    Windows 8 Windows Update fails with error 80244FFF

    Hi @SURAJITsaha ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion 14-b049tu Sleekbook and issues with a Windows update.
    Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system at the time of purchase.
    Please note remove any and all USB devices. Disconnect all non-essential devices, as these could cause some issues.
    Plug the power adapter directly into a functioning wall outlet. Do not plug it into a power strip, surge protector, or secondary power source as this could cause and issue.
    You might have to temporarily disable your virus protection.
    Hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • How do I retrieve contacts in windows.old folder after I installed a new version of windows?

    how do I retrieve contacts in windows.old folder after I installed a new version of windows?

    Skydiver119 wrote:
    My situation may be different from yours since all mu music is ripped from cd's not bought from iTunes, but I would think the premise is the same.
    Doesn't matter what is in your library.
    When I moved computers I literally dragged and dropped the music where I wanted it to be. THen when I opened iTunes I imported the files back into iTUnes
    This creates a new library with all the same items but you lose a lot of info: Ratings, comments, date added, custom EQ, playlists, etc.
    If you simply copy the entire /Music/iTunes/ folder, it is the exact same library, not a new library. No info is lost.

  • Security Update for Windows 7 (KB2667402) downloaded through Windows Update, but cannot be installed!

    Security Update for Windows 7 (KB2667402) downloaded through Windows Update, but cannot be installed!
    OS:
    Windows  7 Home Premium, SP1, 32-bit
    Windows Update-Error 8024200d
    Microsoft Fix it ”Fix the problem with Microsoft Windows Update that is not working” was no use!
    The patch "Windows6.1-KB2667402-v2-x86.msu" downloaded directly, but
    could not be installed!
    System Update Readiness tried, but no use!
    PC Tools Security Product disabled, but no use!
    cmd.exe tried, but no use! 
    Microsoft Support through phone, but no use!
    So, what to do now?

    delete this subkey
    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Terminal Server\WinStations\RDP-Tcp
    and run check for update
    http://support2.microsoft.com/kb/2667402/en-us
    or please check that the download hasn't already been installed - look in the Installed Updates listing for an entry
    If it exists there, uninstall it, and then force a Check For Updates, and retry the install

  • Windows update could not be installed because of error 2149842967

    Hi,
    I am trying to install the update "Update for Internet Explorer Flash Player for Windows 8.1 (KB2974008) " and when I try to install it, it states that it is not applicable to my computer which is Windows 8.1. Is there some prerequisite update
    I need prior to installing this? Event log states that Windows update  could not be installed because of error 2149842967.
    http://www.microsoft.com/en-us/download/details.aspx?id=43627
    TIA

    2149842967 = 0x80240017
    = Update is not applicable.
    the patch is already few months old; it might have been superseeded or included in some rollup.
    check your fileversions against those listed in the kb.
    http://support2.microsoft.com/kb/2974008
    MCP/MCSA/MCTS/MCITP

  • Windows 8.1 Professional x64: Windows will not run Windows Update after fresh install

    Greetings everyone.  I'm having a strange issue that I can't seem to figure out.  I'm developing an image with the following specs:
    Hardware:
    Dell XPS 12 Ultrabook Convertible
    Haswell i7
    8 GB RAM
    256 SSD HD
    Software:
    Windows 8.1 Professional x64
    Problem description:
    After formatting and partitioning the hard drive (UEFI) with a corporate copy of Windows 8.1 x64, the laptop is booted up in Audit mode.  No OEM drivers or software is installed.  Windows is then activated to the KMS server and verified. 
    I then connect to a hotspot (no proxy required) and open up IE 11.  I click tools and select Windows Update.  The laptop then searches and searches for updates and never finds any.  I've let it search for over 10 hours.  The laptop never
    returns an error message.
    Troubleshooting performed:
    1.  I've tried different copies of Windows 8.1 - same result.
    2.  I've tried installing the OS with different types of media (external hd and multiple bootable USB drives) - same result.
    3.  I've disable the Windows Update service, deleted the contents of the SoftwareDistribution folder, restarted the Windows Update service and rebooted laptop - same result
    4.  I've installed this copy of Windows 8.1 on different models of laptops with no OEM drivers or software installed - same result.
    5.  I've installed all of the OEM device drivers in the correct order and ensured that the device manager is clear of bang signs - same result.
    6.  Date and time is set correctly.
    Has anyone else experienced this with Windows 8.1 x64?  If I take a copy of Windows 7 x64 or 8 x64 and install it on this laptop, it updates Windows without any issues.  The problem seems to be with Windows 8.1.
    Thank you in advance for any help you can provide.

    2014-03-04 13:49:52:826
    888 9f8
    Misc ===========  Logging initialized (build: 7.9.9600.16403, tz: -0800)  ===========
    2014-03-04 13:49:52:826
    888 9f8
    Misc  = Process: C:\Windows\system32\svchost.exe
    2014-03-04 13:49:52:826
    888 9f8
    Misc  = Module: c:\windows\system32\wuaueng.dll
    2014-03-04 13:49:52:826
    888 9f8
    Service *************
    2014-03-04 13:49:52:826
    888 9f8
    Service ** START **  Service: Service startup
    2014-03-04 13:49:52:826
    888 9f8
    Service *********
    2014-03-04 13:49:52:842
    888 9f8
    Agent  * WU client version 7.9.9600.16403
    2014-03-04 13:49:52:842
    888 9f8
    Agent  * Base directory: C:\Windows\SoftwareDistribution
    2014-03-04 13:49:52:842
    888 9f8
    Agent  * Access type: No proxy
    2014-03-04 13:49:52:842
    888 9f8
    Service UpdateNetworkState Ipv6, cNetworkInterfaces = 5.
    2014-03-04 13:49:52:842
    888 9f8
    Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
    2014-03-04 13:49:52:842
    888 9f8
    Agent  * Network state: Connected
    2014-03-04 13:49:52:858
    888 9f8
    Service UpdateNetworkState Ipv6, cNetworkInterfaces = 5.
    2014-03-04 13:49:52:858
    888 9f8
    Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
    2014-03-04 13:49:53:045
    888 9f8
    DtaStor Default service for AU is {00000000-0000-0000-0000-000000000000}
    2014-03-04 13:49:53:045
    888 9f8
    DtaStor Default service for AU is {9482F4B4-E343-43B6-B170-9A65BC822C77}
    2014-03-04 13:49:53:045
    888 9f8
    DtaStor Data store successfully created
    2014-03-04 13:49:53:061
    888 9f8
    Agent ***********  Agent: Initializing global settings cache  ***********
    2014-03-04 13:49:53:061
    888 9f8
    Agent  * Endpoint Provider: 00000000-0000-0000-0000-000000000000
    2014-03-04 13:49:53:061
    888 9f8
    Agent  * WSUS server: <NULL>
    2014-03-04 13:49:53:061
    888 9f8
    Agent  * WSUS status server: <NULL>
    2014-03-04 13:49:53:061
    888 9f8
    Agent  * Target group: (Unassigned Computers)
    2014-03-04 13:49:53:061
    888 9f8
    Agent  * Windows Update access disabled: No
    2014-03-04 13:49:53:076
    888 9f8
    WuTask WuTaskManager delay initialize completed successfully..
    2014-03-04 13:49:53:076
    888 9f8
    Report CWERReporter::Init succeeded
    2014-03-04 13:49:53:076
    888 9f8
    Agent ***********  Agent: Initializing Windows Update Agent  ***********
    2014-03-04 13:49:53:076
    888 9f8
    DnldMgr Download manager restoring 0 downloads
    2014-03-04 13:49:53:092
    888 9f8
    AU ###########  AU: Initializing Automatic Updates  ###########
    2014-03-04 13:49:53:092
    888 9f8
    AU AIR Mode is enabled
    2014-03-04 13:49:53:092
    888 9f8
    AU  # AU is not configured yet
    2014-03-04 13:49:53:092
    888 9f8
    AU  # Will interact with non-admins (Non-admins are elevated (User preference))
    2014-03-04 13:49:53:092
    888 9f8
    AU  # Accelerated install is required
    2014-03-04 13:49:53:092
    888 9f8
    Agent Switching to hardware-verified ClientId.
    2014-03-04 13:49:53:092
    888 9f8
    AU WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80070490
    2014-03-04 13:49:53:108
    888 9f8
    AU AU finished delayed initialization
    2014-03-04 13:49:53:108
    888 8c4
    IdleTmr Incremented idle timer priority operation counter to 1
    2014-03-04 13:49:53:108
    888 13c
    DnldMgr Asking handlers to reconcile their sandboxes
    2014-03-04 13:49:57:239
    888 af8
    AU ###########  AU: Setting new AU options  ###########
    2014-03-04 13:49:57:239
    888 af8
    AU Setting AU Approval Type to 4
    2014-03-04 13:49:57:239
    888 af8
    AU  # Policy changed, AU refresh required = Yes
    2014-03-04 13:49:57:239
    888 af8
    AU  # Approval type: Scheduled (User preference)
    2014-03-04 13:49:57:239
    888 af8
    AU  # Auto-install minor updates: Yes (User preference)
    2014-03-04 13:49:57:239
    888 af8
    AU  # Will interact with non-admins (Non-admins are elevated (User preference))
    2014-03-04 13:49:57:239
    888 af8
    AU  # Accelerated install is required
    2014-03-04 13:49:57:239
    888 af8
    AU AU Refresh required....
    2014-03-04 13:49:57:239
    888 af8
    AU AU setting next detection timeout to 2014-03-04 21:49:57
    2014-03-04 13:49:57:239
    888 af8
    AU AIR Mode is enabled
    2014-03-04 13:49:57:239
    888 af8
    AU AIR Mode is disabled
    2014-03-04 13:49:57:239
    888 af8
    AU Accelerate Install required state reset
    2014-03-04 13:49:57:239
    888 af8
    AU Triggering Online detection (interactive)
    2014-03-04 13:49:57:239
    888 9f8
    AU Windows OOBE is still in progress. AU deferring detection
    2014-03-04 13:49:57:239
    888 9f8
    AU WARNING: BeginDetection failed, hr:0x8024a008
    2014-03-04 13:49:57:239
    888 9f8
    AU All AU searches complete.
    2014-03-04 13:49:57:239
    888 9f8
    AU  # WARNING: Failed to find updates with error code 8024a008
    2014-03-04 13:49:57:239
    888 9f8
    AU AU setting next detection timeout to 2014-03-04 22:19:57
    2014-03-04 13:49:57:239
    888 9f8
    AU OOBE is in progress, so cannot perform Accelerated Install
    2014-03-04 13:53:34:838
    888 9f8
    Service UpdateNetworkState Ipv6, cNetworkInterfaces = 4.
    2014-03-04 13:53:34:838
    888 9f8
    Service UpdateNetworkState Ipv6, cNetworkInterfaces = 3.
    2014-03-04 13:54:16:402
    888 9f8
    Service UpdateNetworkState Ipv6, cNetworkInterfaces = 4.
    2014-03-04 13:54:16:417
    888 9f8
    Service UpdateNetworkState Ipv6, cNetworkInterfaces = 5.
    2014-03-04 13:58:48:942
    888 6d4
    IdleTmr Decremented idle timer priority operation counter to 0
    2014-03-04 13:58:56:990
    888 9f8
    Service UpdateNetworkState Ipv6, cNetworkInterfaces = 3.
    2014-03-04 13:58:57:022
    888 9f8
    Service UpdateNetworkState Ipv6, cNetworkInterfaces = 4.
    2014-03-04 13:58:57:272
    888 9f8
    Service UpdateNetworkState Ipv6, cNetworkInterfaces = 5.
    2014-03-04 13:58:58:830
    888 9f8
    Service UpdateNetworkState Ipv4, cNetworkInterfaces = 2.
    2014-03-04 13:58:58:846
    888 9f8
    Service UpdateNetworkState Ipv6, cNetworkInterfaces = 4.
    2014-03-04 13:58:58:877
    888 9f8
    Service UpdateNetworkState Ipv6, cNetworkInterfaces = 3.
    2014-03-04 13:58:58:892
    888 9f8
    Service UpdateNetworkState Ipv6, cNetworkInterfaces = 4.
    2014-03-04 13:58:59:267
    888 9f8
    Service UpdateNetworkState Ipv6, cNetworkInterfaces = 5.
    2014-03-04 13:59:01:937
    888 9f8
    Service UpdateNetworkState Ipv6, cNetworkInterfaces = 4.
    2014-03-04 13:59:01:937
    888 9f8
    Service UpdateNetworkState Ipv6, cNetworkInterfaces = 3.
    2014-03-04 13:59:01:953
    888 9f8
    Service UpdateNetworkState Ipv6, cNetworkInterfaces = 4.
    2014-03-04 14:08:49:957
    888 9f8
    AU ###########  AU: Uninitializing Automatic Updates  ###########
    2014-03-04 14:08:50:007
    888 9f8
    WuTask Uninit WU Task Manager
    2014-03-04 14:08:50:219
    888 9f8
    Service *********
    2014-03-04 14:08:50:219
    888 9f8
    Service **  END  **  Service: Service exit [Exit code = 0x240001]
    2014-03-04 14:08:50:219
    888 9f8
    Service *************
    2014-03-04 14:13:11:111
    888 ba4
    Misc ===========  Logging initialized (build: 7.9.9600.16403, tz: -0800)  ===========
    2014-03-04 14:13:11:111
    888 ba4
    Misc  = Process: C:\Windows\system32\svchost.exe
    2014-03-04 14:13:11:111
    888 ba4
    Misc  = Module: c:\windows\system32\wuaueng.dll
    2014-03-04 14:13:11:111
    888 ba4
    Service *************
    2014-03-04 14:13:11:111
    888 ba4
    Service ** START **  Service: Service startup
    2014-03-04 14:13:11:111
    888 ba4
    Service *********
    2014-03-04 14:13:11:126
    888 ba4
    Agent  * WU client version 7.9.9600.16403
    2014-03-04 14:13:11:126
    888 ba4
    Agent  * Base directory: C:\Windows\SoftwareDistribution
    2014-03-04 14:13:11:126
    888 ba4
    Agent  * Access type: No proxy
    2014-03-04 14:13:11:126
    888 ba4
    Service UpdateNetworkState Ipv6, cNetworkInterfaces = 5.
    2014-03-04 14:13:11:126
    888 ba4
    Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
    2014-03-04 14:13:11:126
    888 ba4
    Agent  * Network state: Connected
    2014-03-04 14:13:11:126
    888 ba4
    Service UpdateNetworkState Ipv6, cNetworkInterfaces = 5.
    2014-03-04 14:13:11:126
    888 ba4
    Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
    2014-03-04 14:13:11:142
    888 ba4
    Agent ***********  Agent: Initializing global settings cache  ***********
    2014-03-04 14:13:11:142
    888 ba4
    Agent  * Endpoint Provider: 00000000-0000-0000-0000-000000000000
    2014-03-04 14:13:11:142
    888 ba4
    Agent  * WSUS server: <NULL>
    2014-03-04 14:13:11:142
    888 ba4
    Agent  * WSUS status server: <NULL>
    2014-03-04 14:13:11:142
    888 ba4
    Agent  * Target group: (Unassigned Computers)
    2014-03-04 14:13:11:142
    888 ba4
    Agent  * Windows Update access disabled: No
    2014-03-04 14:13:11:142
    888 ba4
    WuTask WuTaskManager delay initialize completed successfully..
    2014-03-04 14:13:11:142
    888 ba4
    Report CWERReporter::Init succeeded
    2014-03-04 14:13:11:142
    888 ba4
    Agent ***********  Agent: Initializing Windows Update Agent  ***********
    2014-03-04 14:13:11:142
    888 ba4
    DnldMgr Download manager restoring 0 downloads
    2014-03-04 14:13:11:142
    888 ba4
    AU ###########  AU: Initializing Automatic Updates  ###########
    2014-03-04 14:13:11:142
    888 ba4
    AU AIR Mode is disabled
    2014-03-04 14:13:11:142
    888 ba4
    AU  # Approval type: Scheduled (User preference)
    2014-03-04 14:13:11:142
    888 ba4
    AU  # Auto-install minor updates: Yes (User preference)
    2014-03-04 14:13:11:142
    888 ba4
    AU  # Will interact with non-admins (Non-admins are elevated (User preference))
    2014-03-04 14:13:11:142
    888 ba4
    Agent Switching to hardware-verified ClientId.
    2014-03-04 14:13:11:142
    888 ba4
    AU WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80070490
    2014-03-04 14:13:11:158
    888 ba4
    AU AU finished delayed initialization
    2014-03-04 14:13:11:158
    888 ba4
    AU OOBE is in progress, so cannot perform Accelerated Install
    2014-03-04 14:13:11:158
    888 764
    IdleTmr Incremented idle timer priority operation counter to 1
    2014-03-04 14:13:11:158
    888 10c
    DnldMgr Asking handlers to reconcile their sandboxes
    2014-03-04 14:13:13:353
    888 764
    AU Triggering AU detection through DetectNow API
    2014-03-04 14:13:13:353
    888 764
    AU Triggering Online detection (interactive)
    2014-03-04 14:13:13:353
    888 ba4
    AU Windows OOBE is still in progress. AU deferring detection
    2014-03-04 14:13:13:353
    888 ba4
    AU WARNING: BeginDetection failed, hr:0x8024a008
    2014-03-04 14:13:13:353
    888 ba4
    AU All AU searches complete.
    2014-03-04 14:13:13:353
    888 ba4
    AU  # WARNING: Failed to find updates with error code 8024a008
    2014-03-04 14:13:13:353
    888 ba4
    AU AU setting next detection timeout to 2014-03-04 22:43:13
    2014-03-04 14:13:13:353
    888 ba4
    AU OOBE is in progress, so cannot perform Accelerated Install
    2014-03-04 14:43:13:405
    888 ba4
    AU Windows OOBE is still in progress. AU deferring detection
    2014-03-04 14:43:13:405
    888 ba4
    AU WARNING: BeginDetection failed, hr:0x8024a008
    2014-03-04 14:43:13:405
    888 ba4
    AU All AU searches complete.
    2014-03-04 14:43:13:405
    888 ba4
    AU  # WARNING: Failed to find updates with error code 8024a008
    2014-03-04 14:43:13:405
    888 ba4
    AU AU setting next detection timeout to 2014-03-04 23:13:13
    2014-03-04 14:43:13:405
    888 ba4
    AU OOBE is in progress, so cannot perform Accelerated Install
    2014-03-04 14:47:37:066
    888 764
    IdleTmr Decremented idle timer priority operation counter to 0

Maybe you are looking for