Windows xp 3D display driver

where can i find a 3D displaydriver for Win xp ( my graphic card is S3 savage mx 8mb).
I have installed ALTURION GPS on my laptop and i can not change my screen to 3D vieuw
who can help me pls
thx

Hi rafke
Sorry but you expect too much from this graphic card. This card is not powerful enough for this. As far as I know after installation of WXP you dont need any display driver. If you want you can install DirectX and launch some display tests.
Sorry but I think that there is no possibility to do something.

Similar Messages

Windows 8.1 display driver needed for HP G62 laptop

Windows 8.1 display driver needed for HP G62 laptop

Help us to help you by posting the following information.
1. The complete Model Name. or Product Number. of the notebook - see This HP web document if you don't how to locate the model number and\or product number.
2. The complete version and name of the operating system you are using ( ie Windows 7 64bit ).
It would also help if you let us know which CPU your notebook has installed.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

[W500 and Windows 7] ati display driver stopped responding and has recovered

Hi,
I installed Windows 7 64bit on my W500 (almost 3 weeks old). It installed a driver for the ATI display card from Windows Update. However, since yesterday, I regularly get a driver crash (I assume...).
It's happening when I'm scrolling in a webpage, suddenly the page hangs, the mouse and Windows itself hangs seconds later and after that, after 5 seconds, my screen goes black, the machine beeps and it's back. In the tray, I get an error: ati display driver stopped responding and has recovered.
In the details of the driver, the following can be seen:
Driver Date: 28/04/2009
Driver Version: 8.612.0.0
The card is recognized as a 3650.
Am I doing something wrong here? Can I test with another driver (I tried installing the Windows Vista 64bit, but it doesn't seem to be willing to install...)?
Thanks in advance,
gill

I have the exact same hardware and software (Win7 64) and I'm getting precisely the same symptoms, screen blanks out when I am scrolling a web page vertically using the trackpoint and the center blue trackpoint scroll button.
It's really annoying.
It also never happens when the laptop is in the dock, or when the integrated graphics are engaged, this only happens when the ATI chip is running and only since ATI released the new Windows 7 drivers.
Previously I'd ran this box on on Win7 64 but used the Vista 64 bit graphics drivers from ATI and didn't have the problem, but installation was a pain.

Satellite L850-1HT - Windows 7 ATI display driver - where to find?

Hello,
I've got a L850-1HT (PSKG8E) , I installed a fresh Win7 64bit, but I can't find any drivers that would work with my laptop version.
In the Toshiba drivers area for win7 iIcan only find drivers suitable for Intel graphics, no AMD drivers.
Can anyone help me here.
Thank you.
Message was edited by: deaconpt

Hi
Take a look into the drivers download area of Satellite L850 PSKDLE series.
There you can find the ATI / AMD display driver and these both series use the same graphic chip therefore this driver should work for PSKG8E series too.

Better Display Driver under Windows 8 than Windows 7 for MacBook Pro Retina?

Anyone happen to know if the display support for a MacBook Pro Retina is better under Windows 8 than it is under Windows 7?
Ideally, I would like to be able to run 2880x1800 at True Color as well as have the HDMI out fuction as a second display (maching the behaviour while booted under Max OS X 10.8).
Under Windows 7, the highest resolution that supports True Color is 1600x1200. This would be okay if that setting did not distort the picture (everything is slightly squeezed). At 2880x1800, the highest color depth is High Color (16-bit) which is, well, not something one can actually use if doing graphics work. On my 27" iMac, 2680x1600 supports True Color as expected.
Also under Windows 7, the display connected via HDMI is not recognized.
I've contected both Apple care support and Microsoft support about this, but Apple referred me to Microsoft and Microsoft referrred me back to Apple.
Thanks,
Warren
P.S. Personally, I think it's rediculous to even attempt to do graphics work under Windows, but tell that to the Windwows based corporate world that I freelance in.

Yes, there is a better display driver for the MacBook Pro Retina while running Windows 7 Pro.
And, the answer is so obvious, that I feel a little silly having started this thread in the first place!
The Windows 7 Professional NVIDIA drivers for the NVIDIA GeForce GT 650M card need to be installed manually by downloading them from NVIDIA directly.
If you need to do this on your MBPr Boot Camp volume, use this link:
http://www.nvidia.com/Download/index.aspx?lang=en-us
Then, set the pop-up menus based on your MBPr. [Mine were as follows: GeForce; GeForce 600M Series (Notbooks); GeForce GT 650M; Windows 7 64-bit: English (US)]
What tipped me off to this is that the CUDA drivers need to be downloaded manually on the Mac OS X side to take full advantage of raytracing in Adobe After Effects CS6 and CC. As soon as I started to run that installer it dawned on me, "Hey, you probably need to install the drivers on the Boot Camp side as well." And sure enough after doing so, I am able select all of the expected resolutions as well as run 2880 x 1800 at Millions of Colors (32-bit).
I guess I'm showing my nearly three decades worth of being a Mac user where I'm accustomed to having about everything needed included with the OS.
-Warren

Photoshop CS6 x64, Windows 8 64-bit and an error in my display driver

So I have 64-bit Windows 8, 64-bit Photoshop CS6 and an ATI Radeon HD 4770 GPU. When I go to the settings in PS, it tells me that there is a problem with my display driver so I cannot use GPU graphics processing. I would really like these features to be available to me, especially since my GPU meets the recommendations by Adobe. I installed the latest driver from AMD. What am I missing?

Might want to read this link about uninstalling driver http://forums.adobe.com/thread/1142340?tstart=0

Display Driver crashes in Windows 8.1 on late 2013 macbook

I have been able to install Windows 8.1 on my new 15 inch MacBook with Mavericks and Nvidia GPU. I installed windows along with the bootcamp drivers. The issue I am having now is that the machine complains that "Display driver stopped responding and has recovered".
This is happening every 30 seconds at its worst. When I have tried installing windows 8.1 earlier, rebooting resulted in windows booting to a black screen.
I have tried running windows updates but the same thing happens and after restarting the machine, windows just boots to a black screen. I have tried installing windows but not running any updates and the same thing happens. This is now my 3rd attempt in which I tried installing nvidia drivers direct from the nvidia website (331.65-notebook-win8-win7-64bit-international-whql) but the installer complains about incompatible hardware.
Is there any way to get windows to behave?
For refrence, I installed windows the following way:
Creating an iso from my windows 8.1 dvd on a windows machine.
Use bootcamp assist to create a bootable usb from the iso, allowing it to download boot camp drivers.
Splitting the hardrive into 2 partitions inside bootcamp assist.
After the computer reboots to install windows, I then rebooted back into OSx and went into disk utility. I reformatted the bootcamp partition. I also added 2 more partitions that I later plan to put linux on.
Restarted the notebook, booting from the bootable usb. Followed the windows 8.1 install prompts including formatting the bootcamp partition. Machine rebooted many times.
Allow the installer to install bootcamp drivers.
Restart and windows 8.1 was installed.

The Solution
The section about installing nvidia drivers worked flawlessly!
Download the latest nvidia driver.
Unpack/run it on your local harddrive(note where!), it won't install at this point"You need a modified .inf file to make the installer work"
Go to: www.laptopvideo2go.com - Windows 8 Nvidia 314.22 WHQL .inf File
Locate the inf file for the driver version you downloaded in step 1. Save the inf file locally
"Copy the downloaded .inf file into the Nvidia installer folders at: C:\NVIDIA\DisplayDriver\314.22*\Win8_WinVista_Win7_64\International\Display.Dri ver (when asked if you want to replace the file say yes)." *note that driver version may differ
Run C:\NVIDIA\DisplayDriver\314.22*\Win8_WinVista_Win7_64\International\setup.exe
You are probably done by now!
If problems still occur, go to Device Manager
Locate Monitors -> Generic PnP Monitor
right click and choose disable
My Problem
My screen went black on startup. I think some kind om Windows 8 update, was the cause.
Anyhow, uninstalling the nvidia drivers in safe mode* "solved" the black screen problem.
*Getting into safe mode was the most terrible part since shift + F8 wouldn't work for me at all(were I too slow?).

Repeated Nvidia error on Vaio Z1 laptop: "Display driver NVIDIA Windows Kernel Mode Driver, Version 188.80 stopped responding and successfully recovered." Any thoughts?

I keep having my screen go black and then Win 7 pro gives me this error:
"Display driver NVIDIA Windows Kernel Mode Driver, Version 188.80 stopped responding and successfully recovered."
everything is fine after that.
happens 3 or 4 times a day.
'''doesn't '''seem to be on graphics or flash heavy sites.
driver is up to date and tried reloading driver.

I keep having my screen go black and then Win 7 pro gives me this error:
"Display driver NVIDIA Windows Kernel Mode Driver, Version 188.80 stopped responding and successfully recovered."
everything is fine after that.
happens 3 or 4 times a day.
'''doesn't '''seem to be on graphics or flash heavy sites.
driver is up to date and tried reloading driver.

Display driver for IBM Thinkpad T60 on Windows 7

Hi,
I've just installed windows 7 on my T60. It seems that the display driver (Intel GMA 950) is not behaving the way it used to behave in windows XP. I tried to install everything I could find on the support web site. They say that the support for display driver for T60 has been dropped for Windows Vista onwards. Is there any fix for this problem?
Any help is appreciated...
Thanks,
Harsh

The Win 7 is still in beta version, there is still no official support for it.... I don't think Intel will drop support for the GMA 950 GPU, as this way a lot of relatively new laptop will still be useless.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Satellite L10-209 - How to install display driver for Windows 7?

I've formatted my *Satellite L10-209* and installed *Windows 7*. All drivers installed well but the *VideoCard* :xD
How do I install the Display Driver (Video Card)?
Tools & Utilities CD doesn't work with Win7,,

Hi
Im wondering that you installed Windows 7 on this oldie. In my opinion Windows XP would be the better choice but ok, you can do what you want ;)
Anyway, as far as I know your notebook is equipped with an Intel graphic card so I would recommend downloading the driver form Intel directly because the Toshiba website shows only Windows XP display drivers.
http://www.intel.com
Check this!!!

With hardware acceleration enabled, and with plenty of tabs open, using the Windows 7 taskbar preview option will almost always crashed the nVidia display driver.

Latest Firefox 4 beta 6.
nVidia GT240 1GB DDR3 with driver version 258.96.
Windows 7 Ultimate.
If I have plenty of tabs opened, in Firefox 4 beta 6 with hardware acceleration enabled, using the Windows 7 Taskbar preview feature (that will show all the tabs Firefox has loaded) will cause the Nvidia display driver to crash. When this happen, the GUI part of Firefox will be unusable and has to be killed via Task Manager.
This doesn't happen if hardware acceleration is disabled.

It is beta software and the older 4.0 b6 version may not work with all display drivers.
You can trey the test extension: http://jagriffin.wordpress.com/2010/08/30/introducting-grafx-bot/

Intel display driver crashes on S1 Yoga running 64-bit Windows 8.1

Whenever my machine comes out of suspend mode, the display driver crashes. It goes to a black screen for about 8 seconds then I get the error "display driver intel hd graphics drivers for windows 8 (r) stopped responding and has successfully recovered". The black screen is consistent but the error is occasional. I also got the error when performing a right click on the desktop to enter the display properties. I am running the most current driver for my graphics card and the most current BIOS version. After researching this problem online it appears that it is a known issue but the fixes I saw posted all included using an older driver from another manufacturer. Is there a better fix from Lenovo out there?

Hi @curtisa, @guigs2 and @rmcguigan,
Thanks for your responses.
I managed to get eWallet working correctly for 24 hours approx. by uninstalling Firefox, running CCleaner, deleting all Mozilla references on my system drive, scanned for virus using Win Defender, SuperAntiSpyware, and SpyHunter, (nothing reported) then again downloading and installing the current version of FF to "Program Files (x86)".
However next morning, it had failed again.
I checked the Windows event log and it shows an error with a Source of .NET Runtime. The application is eWallet.exe, Framework Version V4.0.30319, Exception Info SystemAccessViolationException.
I'm not sure what that all means, and would welcome any further suggestions.
Cheers
Steve

Is there a good fix for iTunes crashing on start up on the itunes store for Windows 8.1 tried the ones on here bust still get display driver problems

I recently purchased a new PC and it came with Windows 8.1 and tried to install itunes as i had it installed on windows Vista and XP but for some reason now on windows 8.1 every time I open itunes is takes me to the take a tour page of the new itunes and when i try to go to the itunes store it allows me to brows for like 30 seconds before i get the Error Display Driver.

What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
For Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
Do you have dual graphics adapters?
Go to the Windows Control Panel and select Hardware and Sound and then select Device Manager... In Device manager you click the + sign to the left of Display Adapters... and see if 2 are listed
IF YES, read below
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2

Hp pavilion 15-n011tu display driver for windows 7 64 bit

pavilion 15-n011tu display driver for windows 7 64 bit give me the the way from which i am abel to get driver for my pc

Hi:
Download and install this driver...You want the first file listed (.exe).
https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=3719&DwnldID=23405&ProductFamily=Grap...

B575 Windows 7 display Driver error message

Hi, I'm new and not well educated on the computer a little more than a beginner so please bear with me.
Lately I have been having the problem that i will be looking at the computer and it will go black and then turn blue with a whole lot of messages and numbers on it and tells me some that if this happened just the once restart the computer but if it has happened more than once to follow the directions an it has happened more than once. it tells me to reset my display driver or check that anything i have newly installed is correct. i dont have anything that i have installed . i turn the computer off and then have to start it as normal and then it runs fine until the next time. It is a laptop b575, about 2 years old windows 7. i have checked the drivers in the device manage and they say i have all the up to date ones so i cant fiure out what it is. the message also says to remove bios memory or cach etc and i dont know what that is other thing i only have is the thing you can use for fingerprinting and i dont use it can anyone help me please?
Moderator Note; subject edited

is there someone that can help me with this?

Windows xp 3D display driver

Similar Messages

Maybe you are looking for