Wireless connection for my iMac

I have a PC with a wireless connection. I have recently retrieved my iMac DV+ which is about 7 or 8 years old. How do I ascertain if it has a wireless card? If it doesn't, how do I get one, and is it easy to install?

It probably doesn't have a card installed, but System Profiler should tell you. Whether you can add a card depends on the exact model. This thread gives some information:
http://discussions.apple.com/thread.jspa?threadID=678237&tstart=240

Similar Messages

  • I got a new wireless connection for my mac and cannot figure out how to delete the last connection service I had. Everytime I shut the computer, the network goes back to the other one. I cannot find the file ANYWHERE

    got a new wireless connection for my mac and cannot figure out how to delete the last connection service I had. Everytime I shut the computer, the network goes back to the other one. I cannot find the file ANYWHERE

    Under Network Preferences, select the WiFi
    click on "Advanced..." button
    Select the network you want to delete from the list and click on "-"
    Click "Ok"
    Click "Apply"
    Well done ;-)
    You may also want to delete the wireless key from Keychain.
    Open Keychain, seach for the old wifi network name, slect it and click delete

  • Is there any way to use a MacBook Pro as a router to set up a wireless connection for XBOX live.

    Is there any way to use a MacBook Pro as a router to set up a wireless connection for XBOX live.

    Mac OS X 10.6 Help: Sharing your Internet connection

  • What is the best wireless router for my imac G4

    i need a wireless router for my imac g4. Which one do you recommend? All all wireless routers capatible with macs?

    As Donald mentions, the routers are all compatible with Macs, but the software CD that they include often has Windows specific software on them that is really just a front-end for configuring the router for use. It does nothing that you cannot do yourself manually by accessing the router through the IP address that gets you into the router settings.
    If it sounds difficult, it certainly is not. Once you are in - and that is simple - the router's info is in a nice graphical interface that is simple to use.
    I use a Netgear WGR614 for my mixed Mac-PC network at it works like a charm. I got it at Best Buy for $39.99.

  • My wireless mouse for my iMac keeps loosing connection. Started after I was having problems with computor not waking up and I put the the setting to "never". Anyone having same problem?

    My wireless mouse for imac keeps loosing connection. Started after I was having truoble with computor not waking up and I put the setting to "never sleep". Any suggestions?

    If it's an Apple mouse, make it "Favorite" in Bluetooth preferences.
    If it's not, the same thing might help, too, but if the problem continues it could be a driver issue (possible incompatibility with your OS X version).

  • Wireless connection between cable imac and laptop Windows,

    This should be an easy question so here goes. I currently have an Imac with a cable connection. I plan to buy a Windows laptop within the next week. I want to be able to access the internet with the laptop from another room. There are airports and routers from Apple and wireless network cards for Windows. I'm confused. What's the simplest way for my Mac to wirlessly connect to the Window's laptop so that I can access the web from another room?

    1. Your new laptop needs to have a wireless card.
    2. You then need a wireless router with several lan ports.
    The iMac will connect to the router via ethernet cable to one of the lan ports and your laptop should connect via the wireless connection. There are many wireless routers out there that will do the job. Check out the Linksys wrt54g. make sure your laptop comes with a wireless card built it.

  • HP laserjet P1100 wireless connection for mac

    Hoping for a quick response.... I have a Mac with 10.8.5 and I have purchased an HP Laserjet P1100 wireless printer. I have tried installing the drivers to print wireless...ly with no success. I have taken time out to type this message because I have not been able to find someone who has had  the same issue in the internet. I need a walk thru because there are many steps where the issue may be occuring. Your written installation documentation conflicts with your User Guide PDF file. Cord or no cord during driver installation for wireless connection???  Was lost after #5 page 18 on the User Guide PDF file.
    I figured it out. Your directions are misleading and not up to date. Cord is not an issue but needed for entire install process. At one point I'm in my system prefs then I'm on my web browser where I  found Bonjour which added the network to my printer choices so now I can print wirelessly... hopefully I don't have to do that again because I'm not sure of the steps I took. Fairly complex set up.

    Hey @matt4,
    Welcome to the HP Support Forums!
    I see that you have a Mac OS X 10.8.5 and a new HP Laserjet P1100 series printer and are looking for quick and easy wireless configuration steps. I just have one question for you:
    Do you have a P1100 or a P1102w?
    What's my Model Number?
    I'm going to assume that you have a Laserjet P1102w. The steps for wireless configuration of a Laserjet P1102w are a bit confusing on Mac OS X 10.8 as you need to use the generic Apple Airprint driver because there is no 'Full Feature Software and Driver' installation for that Operating System. In saying that, I will try my best to give you easy steps to reference should you need to configure your printer again on the wireless network.
    How to Connect the Printer to the Network:
    Step 1: Install the Generic Mac Printer Driver:
    1. Turn your printer on
    2. Plug your USB cable from the printer directly into your Mac
    3. Click on the Apple menu, and then click System Preferences
    4. Click Print & Scan and make sure your printer is in the list of available devices.
    5. If your printer is not listed, click the plus () sign at the bottom left pane, click the name of your USB printer, and then click Add.
    Step 2: Connect the Printer to the Wireless Network:
    I've added the video above so you can view these step-by-step instructions.
    Click the Apple icon (), and then click System Preferences.
    Click Print & Scan.
    Click Open Print Queue, and then click Printer Setup.
    Click the Utility tab, and then click Open Printer Utility.
    Click HTMLConfig.
    Click the Networking tab, and then click Wireless from the list on the left.
    Under Communication Mode, click Infrastructure, select your network SSID from the Available Network Names (SSID) list, and then click the << button.
    From the Security Mode pop-up menu under Authentication, click WEP or WPA/WPA2. Your selection depends on the wireless security protocol your network uses.
    Note: If your network does not have wireless security, leave the Security Mode set to Open System (No Authentication).
    Type your WEP/WPA/WPA2 key in the appropriate field, and then click Apply.
    In the confirmation box, click OK, and then close the HTML Config and Print Queue windows.
    Step 3: Delete the USB connected printer, and then add the wireless connected printer:
    In the Print & Scan window under Printers, click your printer name, and then click the Minus sign () to remove it.
    NOTE: This removes the USB connection from the list so that the only entry for your printer is the wireless connection.
    Disconnect the USB cable from the printer and the computer.
    Under Printers, click the Plus sign ().
    Select your printer name with Bonjour as the Kind, and then click Add
    Once your printer is configured for Bonjour, if you have other Mac OS X computers that you want to use with this network printer you do not have to run all these steps again. You simply make sure that the other Mac computers are all connected to the same network that you have set your printer up on and just open Print & Scan. Under Printers click the  () plus sign and select your  printer name with Bonjour as the Kind, and then click Add.
    You can reference all of this information in: Setting Up the Printer for a Wireless Network for the HP LaserJet Pro P1102w Printer
    Let me know if these steps help clear up any confusion for you. Good luck!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • Wireless connecting for laserjet Pro P1102W

    I have a mac - no problem setting up the printer but I can't seem to connect the wireless component.  I have gone into the systems and opened up printer - utility - everything is good but it won't let me put in the encrypted password for my network.  

    Welcome to the HP Forums dcfrk,
    I see by your post that you are unable to setup the printer on the wireless network.
    I can help you with this.
    If the issue is that the HTML won't load, please follow these steps for 10.8 or lower:
    Make sure Safari is set as the default browser. (sometimes the EWS won't open if it isn't set as the default)
    Open Safari, across the top select the Safari menu, select Preferences, General, set as default.
    Close out all applications.
    You can access the HTML from this location:
    On the Apple menu bar, click Go, computer, Mac Harddrive, library, printers, HP,Laserjet, P1100_P1560_P1600Series, open HTML config.
    Go to the network tab, select wireless on the left side, select infrastructure, select network name, select the double
    arrow button to move the network name over to the left side, fill in passwords, apply.
    You should get a solid blue wireless light in about 1 minute.
    Then go to the Apple, system preferences, print & scan, highlight the P1102w and click the minus at bottom left
    corner to delete it, then disconnect USB cable, click the plus sign in bottom left corner and highlight the P1102w bonjour printer, beside Use: make sure it shows the proper printer name and not Airprint, (Airprint is a preinstalled Apple driver with basic functionality) click on the add button. You might have to click on the drop down to select your printer.
    Test the printer.
    Steps for 10.9:
    Here is a Youtube video of the Laserjet P1102w wireless installation for Maverick.
    Laserjet P1102w.
    What operating system are you using? Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    Please provide in detail the results if you are still having issues.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Can't set up wireless connection for HP C4385 All-In-One with Windows 7.

    Hi guys,
    I just got a new laptop with Windows 7 64 bit. I already had an HP C4385 All-In-One that I was using with my last computer. I have also just set up a new wireless network because I got a new cable provider. So basically I needed to do everything from the beginning.
    When I inserted the setup CD and ran the setup program, it said I couldn't continue because my OS was not supported. I went to the HP website and found the solution, which was to plug the printer in via USB and let Windows Update find the latest driver. Ok, that's fine, the printer works now when the USB cord is plugged in.
    To set up the wireless connection, the instruction manual says I need to do it through the network setup wizard p on the CD. But that brings me back to my original problem-- the setup CD won't work because it doesn't recognise Windows 7.
    So my question is-- how can I update the network settings (SSID and key) on the printer without the network setup wizard?
    Thanks for any help, this is really driving me crazy!

    Download from hp.com here.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Wireless connection for officejet 4500

    I just replaced my router and now I'm having problems reconnecting my officejet 4500.

    Well on this printer you go into the front panel setup which you would hit the setup rench symbol to the right of the machine than find network  and then under network setting you will see wireless setup wizard when you select that option then to put in the passphase you do it like texting you keep pushing the number until it turn into a letter or number for you so it like texting when you put in the passphase.  Now the passphase was setup when you got the new router so if you don't remember it contact the router company or it may be on the router and you put in the front panel like texting. I attached a document on how to reconnect to the network. Maybe this step by step process will help you out on resolvinfg the issue your having.
    Thank you for being a Valued Hp Customer
    Step one: Prepare for installation
    Make sure that you have the following requirements before you begin:
    Network name: The network name is the SSID (Service Set Identifier).
    WEP key or WPA security passphrase
    A computer that is connected to the wireless network.
    Internet access. HP recommends broadband Internet access such as cable or DSL.
    Your wireless-capable HP product. Place it close to the computer during the installation procedure.
    Administrator privileges or password (Vista)
    Make sure the product, access point, and computer are all on, and that the computer is connecting to the wireless network.
    Exit all applications running on your computer.
    Disconnect any USB or Ethernet cable that is connected to the product.
    If you previously installed the software for a USB connection and now want to change to a wireless network connection, follow these instructions to remove the USB installation before continuing.
    Go to the Printers folder:
    Windows XP: Click Start , and then click Printers and Faxes .
    Right-click the icon for HP product, and click Delete to remove it.
    Step two: Connect to the wireless network
    The following video demonstrates how to set up a wireless connection between your product and a wireless network. The product shown in the video is the HP Officejet J4680. The outside of the product might look different, but the steps are similar for your product.
    Setting up a wireless connection using the contol panel
    Follow these steps to connect the product to your wireless WLAN 802.11 network.
    Press the Setup button ( ) on the product control panel.
    Press the Arrow buttons ( ) to highlight Wireless Menu , and then press OK .
    Press the Arrow buttons ( ) to highlight Setup Wizard , and then press OK .
    The Wireless Setup Wizard searches for networks, and then displays them in a list.
    Press the Arrow buttons ( ) to highlight the network name (SSID) that you gathered in the previous step, and then press OK .
    If prompted, enter the WPA or WEP key:
    Use the alphanumeric keypad on the product control panel to enter the passphrase.
    When you finish entering the passphrase, press OK .
    Make sure the product successfully connects to the network before continuing to the next step.
    Step three: Decide whether to install with the product CD or download the software
    Don’t worry if you don’t have the product CD! You can download the most current software available for your product from the HP Web site at no cost. The following information might help you decide which installation method to use:
    Step four: Install the product software
    To install the product on the wireless network, follow the steps for the method that you want to use (CD or download). Repeat the steps to install the software on each computer that will use the product wirelessly over the same network.
    IMPORTANT : If you get any firewall messages during installation, click unblock , accept , continue , yes , allow , or permit , or the installation will fail.
    Method one: Install the software with the product CD
    Insert the product CD into the CD drive of the computer, and then wait a few seconds for the software installer to start.
    If the installer does not start automatically, follow these steps to start it:
    Windows XP: Click Start , click My Computer , and then double-click the CD drive.
    Follow the on-screen instructions to start the installation.
    NOTE: If you previously installed the software and are changing the connection type from USB to wireless, click Add a device when the Uninstall the software or Add a device window opens.  
    If prompted to choose the type of installation, review the following information
    The Recommended type of installation allows you to take advantage of all your product features.
    When prompted to choose a connection type, select the Network type, not the USB type.
    Follow the on-screen instructions to finish installing the software.
    Method two: Download and install the software from the HP Web site
    Follow these steps to download the software, and then install it.
    Step one: Download the software
    Many products have more than one driver option on the downloads page. Choices might include a Basic type, and Full Feature type. If both options are available, the following information might help you decide which driver to download.
    Follow these steps to download the product software and save it to your computer.
    Open a new window to browse to the Select Software and Drivers page:
    Right-click this link, Select Software and Drivers , and then click Open in New Window .
    If prompted, type your product number. You might also need to click it in a list of similar products.
    Click your operating system.
    The Select Software and Drivers page opens.
    Click the driver that you want to download. If you need help deciding, see the information in the previous table.
    Click Download only . This option allows you to install the software at any time after the download completes.
    Click Save , and then browse to the location on your computer where you want to save the file.
    Click Save . The software downloads to your computer.
    Tip: Make a note of the place that you saved the file, in case you want to install it at a later time.
    Step two: Install the software
    Follow these steps to install the downloaded software.
    When the download is complete and you are ready to install the files, click Open Folder , and then double-click the downloaded file. The file name ends in .exe .
    NOTE: If you closed the Download Complete screen, browse to the folder where you saved the .exe file, and then double-click it. 
    You can accept the default location to save the files. Click Next , and then wait while the installer extracts the files to prepare for installation.
    Follow the on-screen instructions to start the installation.
    NOTE: If you previously installed the software and are changing the connection type from USB to wireless, click Add a device when the Uninstall the software or Add a device window opens.  
    If you downloaded a Full Feature driver, the installer might prompt you to select the type of installation you want. (Skip this step if you downloaded a basic driver.)
    The following information might help you decide which installation type to use.
    The Recommended type of installation allows you to take advantage of all your product features.
    When prompted to choose a connection type, select the Network type, not the USB type.
    Follow the on-screen instructions to finish installing the software.
    Additional Information 
    You can print a page of product information from the control panel of your All-in-One. The page includes information about the product IP address, MAC address, and network status. Follow these steps to print the information: 
    Press the Setup button ( ) on the product control panel.
    Press the Arrow buttons ( ) to select Print Report , and then press OK .
    Press the Arrow buttons ( ) to select Network Config , and then press OK . The Network Configuration Page pr

  • Wrt120n Intermittent Wireless Connection For Specific Apple Devices

    Hello,
    I recently upgraded my Linksys wrt120n router firmware & had to reconfigure settings.  Subsequently, some (but not all) of my apple devices are having intermittent wirelesss connection problems.  Specifically, my ipad1 & ipad2 never lose thier connection but a macbook pro (~ 2 years old), iphone 3g, iphone 4, older ipod touch & very old ibook g4 all work for a period of time (usually 1/2 day) & then lose thier connection.  When I attempt to reconnect these devices I receive the following error..."unable to join the network xxxxxx....".  I also have a Dell laptop (1 1/2 yrs old) that generally does not have the connection problem.  Finally, when the devices do lose thier network connection all I have to do to reconnect is go to the Linkys router setup webpage & click on save & the wireless connection works again (almost like this is just refreshing the connection for these specific apple devices).  I was not having any problem prior to the firmware upgrade & from what I have read the older firmware version is no longer available so going back to the old firmware does not appear to be an option.  Any help is appreciated?

    Let me know the name of the ISP? Let me know the ip address that you are getting from the router. To check the IP address that you are getting from the Router...
    You can check the IP address in the following manner:
    # Click on Start -> All Programs -> Accessories -> Command Prompt.
    # A black pop up box should come up, type: "ipconfig /all" …
    There check the IP address and Default Gateway under LAN….
    # Open up the browser on the desktop and on the address bar type “Address of the Default Gateway” that will open up the Router setup page…
    # On the same set up page reduce the MTU size to 1400 from Auto.
    # Then Click on wireless Tab select Channel Width to 20 MHz only and Channel to 6, 9, and 11. Click Save Settings.
    Secondly avoid using any other wireless devices like cordless phones, microwave oven etc nearer to the router. Then check the wireless connectivity.

  • Which wireless keyboard for my imac 10.4

    Which wireless keyboard do I use for my imac 10.4.11

    Hi, wilst I personally would avoud any Apple Keyboard or Mouse made in the last 10 tears...
    http://store.apple.com/us/question/answers/product/MC184LL/B?pqid=QTUD9XYY4ADHAT K99CD2CYTU2CPPUCU2C
    http://www.logitech.com/en-us/keyboards/keyboards/wireless-solar-keyboard-k750-m ac

  • Wusb11 only connecting to wireless connections for 5 mins at a time??

    My wireless reciever wusb11, will only connect to wireless connections within 5 mins of plugging it in. If i unplug it then plug it back in "I get another 5 mins of internet then it drops all connections and says no networks in range.

    first off , update the drivers of the WUSB11 .. and try changing the following settings on the wireless router /  AP ..
    channel - 1 or 11
    security mode - wpa
    beacon interval - 50
    RTS and fragmentation threshold - 2304

  • Wireless connection for laptop

    my computer cant find the wireless connection this morning. worked last night. tried severla things with no luck. Does this mean my card his gone? ty

    Did your wireless card get turned off? Most laptops have a switch or a key that you press to turn the wireless on and off?
    **If you like my answer then click the little Star under my username.
    **If my response answered your question then click the Solved button. Thanks

  • Applying dynamic routing feature on outdoor wireless connection for load ba

    Gentlemen,
    Does the Cisco outdoor wireless unit support dynamic routing (e.g. RIP or others) to do the load balancing between leased line and wireless connection.
    I am looking to confirm if the outdoor unit has the routing features to apply this scenario.
    Thank you,

    No Response !!!!
    Pls your action.
    Thank you,

Maybe you are looking for